Used Fire Brigade for sale (1,298)

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Nedpfxjyx N Hqs Almsda Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: reconditioned (used), Year of construction: 2014, operating hours: 9,132 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 3,700 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 32 m/min, overall weight: 1,750 kg, bar passage: 20 mm, Equipment: documentation/manual, Swiss-type CNC Lathe TSUGAMI B0206E-II TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate X1 axis: 24000 [mm/min] Rapid traverse rate X2 axis: 24000 [mm/min] Rapid traverse rate Z1 axis: 32000 [mm/min] Rapid traverse rate Z2 axis: 32000 [mm/min] Rapid traverse rate Y1 axis: 15000 [mm/min] Rapid traverse rate Y2 axis:15000 [mm/min] Max. bar diameter: 20 [mm] Min. spindle speed: 200 [rpm] Max. spindle speed: 10000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 3.7 [kW] Min. counter spindle spindle speed: 200 [rpm] Max. counter spindle speed: 12000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 2.2 [kW] Nsdsy Eff Ajpfx Almoda Number of positions end attachment: 8 Number of positions guide bush holder 1: 5 Number of motorized positions guide bush holder 1: 3 Live tools speed guide bush holder 1: 8000 [rpm] Number of positions secondary operation: 8 Number of motorized positions secondary operation: 4 Live tools speed secondary operation: 8000 [rpm] Max. tool holder cross-section: 12 x 12 [mm] Working hours: 9132 [h] Weight: 1750 [Kg] INCLUDED EQUIPMENT: x1 sliding headstock (direct drive) x1 counter spindle (direct drive) x1 rotary guide bush (direct drive) x108 collets x7 live tool holders x1 parts catcher x1 parts conveyor belt x1 parts ejection device x1 chip conveyor x1 coolant tank x1 oil mist extraction unit, 3nine LINA type x1 IEMCA ELITE 220 E / 32 XL bar feeder x1 set of accessories for IEMCA ELITE 220 E / 32 XL bar feeder x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical transformer x1 3-color status light x1 set of IEMCA manuals x1 set of FANUC manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Citizen, Nomura, Tornos, Miyano, Index, Traub, and Star lathes, as well as machining centers, milling machines, and grinding machines.

Condition: used, Year of construction: 2011, operating hours: 29,048 h, functionality: fully functional, turning diameter: 16 mm, bar diameter (max.): 16 mm, MOBILE TURRET LATHE, EVODEO 16a TYPE, WITH FANUC 16i-TB CNC CONTROL, PNC-DECO, 16MM CAPACITY / 10 AXES, WITH ELITE 220 TOOL CARRIER Including: - Base machine with 10 axes, FANUC 16i-TB - Synchronous rotating chuck, 16mm, including drive - C1 axis function - Polar coordinate function, C1 or C4 axis - S6 motor (8,000 rpm) for a maximum of 3 rotating tools on a tool system (X1-Y1), not synchronized with S1 - S2 motor (8,000 rpm) for a maximum of 3 rotating tools on a tool system (X2-Y2) Ndodezd Sq Hopfx Almea - S3 motor (8,000 rpm) for a maximum of 3 rotating tools in the end position - Tailstock with positioned stop - C4 axis function - Limitation of the clamping stroke of the tailstock (system for fine adjustment of the clamping diameter) - Part extractor with adjustable pneumatic cylinder, including cleaning of the tailstock chuck with oil (maximum pneumatic cylinder stroke 150mm) - S5 motor (8,000 rpm) for a maximum of 6 rotating tools (synchronizable with S4) - 3-color light beacon, configurable (colors: yellow, red, green) - Centralized lubrication system, BIJUR type - Adaptation for work without a chuck (maximum part length 50mm) (requires one of the options 0937 to 0941) - TB-DECO ADV programming software MOBILE TURRET S1 (Z1) - 12,000 rpm - Right-hand bar rotation - Adaptation for SCHAUBLIN F22 chuck (no. 76-0071) TOOL SYSTEM (X1-Y1 / X2-Y2) - 2 independent carriages with 5 positions - 2 independent S2, S6 motors END TOOLING - Independent carriage with 4 positions - Independent S3 motor INDEPENDENT TAILSTOCK (Y4-Z4) - 12,000 rpm - Adaptation for SCHAUBLIN F20 chuck (no. 76-201) COUNTER OPERATIONS (X4) - Stations with 6 positions (3 in the end position and 3 transverse) VARIOUS - Device for evacuating and collecting parts outside the machine - Variable flow coolant pump - Lighting lamp - Electrical interface for fire extinguishing system, compliant with CE and EMC standards NUMERICAL CONTROL - FANUC 16i-TB numerical control - 10" color screen - TB-DECO ADV programming software (version 750-005 + 750-0710) EQUIPMENT - Adaptation for F13 chucks - Long type tool holder, 12x12mm or ½ inch section, right-hand bar rotation - Adaptation for chucks - System for adjusting the chuck clamping from the front for F13 chuck - System for adjusting the chuck clamping from the front for F20 chuck - Electrical interface 2004 (maxi2) including 2 sockets for adapting up to 2 peripherals - Swiss 230 V socket - Oil mist extraction device

Condition: used, mileage: 858,100 km, power: 260 kW (353.50 HP), first registration: 11/2008, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion, subject to errors, typographical errors, and prior sale: Mercedes Benz Citaro LE intercity bus with partial leather seats and seatbelts (Vehicle 305) First registration: November 20, 2008 858,100 km Engine: 11,967 ccm 260 kW / 354 hp Euro 5 EEV Technical inspection and emissions test due Permissible total weight: 19,000 kg Unladen weight: 13,020 kg Nsdpfx Aszfdk Islmjda Payload: 5,980 kg Axle load front: 7,245 kg, rear: 11,500 kg Overall length: 13,057 mm, overall width: 2,550 mm, overall height: 3,400 mm 50+20 seats and standing places + wheelchair/stroller or 50+15+1 Seatbelts, armrests, leather headrests Ramp at the double door Single door at the front, double door at the rear Windshield with stone chips Air conditioning, auxiliary heating, ventilation Radio/CD LAWO Without cash register Emergency exit Electric mirrors + mirror heating Fire suppression system out of order; fire extinguisher needs to be reprogrammed; battery was disconnected Engine slightly oily Full air suspension Fully automatic transmission Tires 275/70R22.5, approximately 30% tread remaining in the front, approximately 30% in the rear Price: €6,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: used, mileage: 26,607 km, power: 96 kW (130.52 HP), first registration: 04/1984, fuel type: diesel, axle configuration: 4x4, wheelbase: 3,500 mm, fuel: diesel, color: other, gearing type: mechanical, number of seats: 9, total length: 6,550 mm, total width: 2,500 mm, Year of construction: 1984, Front axle: Steering Rear axle: Double wheels Number of cylinders: 6 Njdpszicz Tefx Almoda Engine capacity: 6.086 cc Empty weight: 5.730 kg Carrying capacity: 1.760 kg GVW: 7.490 kg Emission class: Euro 0 Registration number: BX-VD-22

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools 20-position tool changer Fire extinguishing system Chiller Aluminum clamping plate, Erowa Documentation Machine is connected and available for inspection. Nedpfx Ajzguk Uolmeda

Condition: used, Year of construction: 2023, functionality: fully functional, tank capacity: 150 l, total length: 1,200 mm, total width: 900 mm, total height: 1,010 mm, power: 30 kW (40.79 HP), input voltage: 230 V, Electronically tilting roasting pan, brand Firex. - Year of manufacture: 2023 Nodpezgwfbofx Almeda - Model: BR1G1150I.M - Power source: gas - Voltage: 230V

Condition: used, functionality: fully functional, machine/vehicle number: 31089, mileage: 109,900 km, power: 346 kW (470.43 HP), first registration: 12/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 8x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, suspension: steel-air, loading space volume: 37.5 m³, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, seat heater, tachograph, traction control, truck registration, Available from 09/2026. The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles available upon request. Ndedpfx Alezi Rw Aemja ABS, EBS, Full Brake Assist, ECAS, ESP, ASR, Adaptive Cruise Control, Emergency Brake Assist (EBA), Disc Brakes, Driver Alert System, Lane Departure Warning (LDW), Heated Fuel Filter, Differential Lock in Rear Axle, Hill Start Assist, Front Axle with Leaf Springs, Rear Axles with Air Suspension, Steerable and Liftable Tag Axle, Side Impact Protection, Three-Piece Steel Bumper, LED Daytime Running Lights, Wheelbase 1795 – 2980 – 1350 mm, 390 l Fuel Tank, 35 l AdBlue Tank, 2 Seats, Driver's Comfort Seat with Air Suspension and Seat Heating, Co-Driver's Comfort Seat with Air Suspension and Seat Heating, Automatic Climate Control, Central Locking, Cruise Control, Electronic Speed Limiter 90 km/h, Digital Tachograph, Liftable Roof, Tinted Windows, Electric Windows, Electrically Heated and Adjustable Mirrors, MAN-Tronic Onboard Computer, MAN Media Truck 12 V Radio with 7" Color Display, Hands-Free Functionality for 1 Mobile Phone (MFL and Bluetooth® compatible), Navigation Preparation, Toll-Collect, Connectivity Board Module (Rio-Box) Rear Section: "XL-Whale" Load Volume Net 37.5m³; Hopper Volume Net: 9.6 m³; Press Shield with Scraper for Ground Contact; Cab Protection Roof, Hydraulically Foldable; Cab Protection Roof, GRP; Follower Panel with Inverted Cab Protection Roof; Third Flap as Windshield; Quiet and Low-Wear Vane Pump; Clear and User-Friendly Control Unit, Operation of All Loading Functions with a Single Control Lever (Joystick) and Operator Guidance via Color Display; Operation of Unloading Function from the Driver's Cab; Self-Diagnosis System with Plain Text Display; Fork, Two-Sided Adjustment (Adjustment Dimension 1,280mm-1,890mm) and Integrated 1.1 Mount (Container According to 840 2-3); LED Arm Marker Lights, Without Turn Signals; 2 Arm Guide Rollers in Tipping Position; 1x LED Rotating Beacon Mounted on the Top at the Rear; 1x LED Work Light on the Hopper; 1x LED Work Light Behind the Driver's Cab; 2x LED Gooseneck Lights, Outline Lights at the Bottom; 2x LED Outline Lights at the Top; 1 LED Rotating Light at the Bottom Rear Right; 2 LED Strobe Lights at the Front Under the Protection Roof; 2 LED Work Lights at the Front; 2 LED Work Lights for Illuminating the Rear Axle with 15 km/h Shut-Off; 2 LED Reversing Lights on Both Sides, Coupled with Reverse Gear; Central Lubrication System Incl. Electric Pump; Camera System - Brigade 360 and Roof Camera for the Hopper; Radio Remote Control with Position Binding; Speed Increase via Radio Remote Control; Contour Marking; Holder for Shovel and Broom; Aluminum Ladder with Step Limitation; 2 x A-Marking; Fork Scale - MOBA

Condition: used, Double-Girder Overhead Crane, KONE / Konecranes, 25/25 t (max. 30 t),Bridge crane, Used machine Manufacturer: KONE Cranes / Konecranes Drawing No. / Type Specification: HK 0049 - M / HK0049 - E01 Lifting capacity: 25/25 t (maximum tested lifting capacity: 30 t) Span profiles: 14 m Nedozi Ua Iepfx Almoda Lifting height (travel): 15.5 m Condition: Used, in excellent and continuously maintained condition, ready for immediate operation Special feature: The crane comes with complete factory and periodic service documentation, including manuals. In 2023, it underwent an official Konecranes factory wire rope replacement (fully certified), and it has been upgraded with a modern, integrated Konecranes radio remote control and frequency inverter drive system. Overall dimensions: 14,318 mm (total bridge length) x 4,334 mm (total height) Technical and operating parameters: Crane classification (according to FEM): Steel structure: 2 / Machinery: 1 Am Rated lifting speed: 3.2 / 0.5 m/min Trolley travelling speed: 16 / 5 m/min Bridge travelling speed: 20 / 5 m/min Installed motor power (Lifting): 15 / 2.5 kW (30% ED, per hoisting drum) Installed motor power (Trolley): 2x 0.65 / 0.15 kW (40% ED) Installed motor power (Bridge): 2x 1.8 / 0.5 kW (40% ED) Supply voltage: 3x 380V, 50Hz + N Control voltage: 48V, 50 Hz Main fuse: 160 A Crane control: Upgraded Konecranes radio remote control for standard operation, plus an independent backup pendant control festooned along the bridge Power supply: Festoon cable system Environmental fire hazard classification: Class "C" Protection class: IP 55 (motors), IP 54 (control panel) Safety devices: Hoisting drums are equipped with electronic overload protection, limit switches for both bridge and trolley travel.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: Nodpfx Aeziznfolmoda - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Condition: used, with normal signs of use, fully functional Manufacturer: Vetter (Germany) Country of manufacture: Germany 📦 Set includes: Vetter air lifting bag air hoses with quick couplings transport bag complete set as shown in the photos ⚙️ Technical data: Model: Type 1/13 (VSM 14) Max. lifting force: 65 kN (approx. 7.2 tons) Max. working pressure: 1 bar (14.5 PSI) Nominal capacity: 403 L Air requirement: 806 L Year of manufacture: 2018 🛠️ Applications: technical rescue (fire brigade) lifting of machinery and vehicles Ndjdpoy Af S Refx Almea service and industrial work emergency situations 📌 Additional information: equipment from a reputable German manufacturer robust and durable construction fast and safe lifting of heavy items sold exactly as shown in the pictures

Condition: used, mileage: 37,100 km, power: 118 kW (160.44 HP), first registration: 06/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,100 mm, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, loading space volume: 21 m³, loading space length: 4,313 mm, loading space width: 2,100 mm, loading space height: 2,362 mm, Equipment: air conditioning, cruise control, Cargo compartment (L W H): 4,313 mm x 2,100 mm x 2,362 mm, Cargo compartment volume: 21 m³, Fabric seats, Leaf spring suspension, 1 x Airbag, Electronic Stability Program (ESP), Automatic air conditioning, Passenger bench, Radio, DAB digital radio, Adjustable steering column, Electric windows, Outside temperature indicator, Electrically adjustable and heated mirrors, Central locking with remote control, Tinted glass, Fire extinguisher holder, Spare wheel, Daytime running lights, Telematic system, Speed limiter, BOX + 750 KG TAILGATE, AUTOMATIC CLIMATE CONTROL, SUSPENSION SEAT Nedpfx Alezkytiomsda

Condition: good (used), functionality: fully functional, machine/vehicle number: WKY3S0139PM046964, empty load weight: 6,100 kg, maximum load weight: 29,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 10/2026, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 1,800 mm, loading space volume: 37 m³, suspension: air, tire size: 385/65 R 22.5, color: black, Equipment: ABS, our vehicle number: #30622 Kempf SKM 36/3 Aluminium semi-round tipper body, 37.1 m³ Ndedjxp Huwjpfx Almoa Floor made of 7 mm thick annealed aluminium Plastic lining OKULEN, Okuslide Premium tough blue – for cold bulk materials, sheet thickness 12.5 mm IPH tipping cylinder Swing tailgate Sludge-tight Grain chute Pneumatic locking Load pressure gauge Roll tarp Platform with ladder BPW Eco Air HD axles Tyres 385/65 R 22.5 Alcoa Dura-Bright aluminium rims Disc brakes Raise/lower function Air suspension ABS EBS RSS Haacon drop supports Folding rear underrun protection Side underrun protection Toolbox Fire extinguisher box 2x work lights Financing/leasing available on request!

Condition: used, Year of construction: 2018, Lathes Travel distance X: 135 mm Travel distance Y :40 mm Travel distance Z: 200 mm turning length: 330 mm max. turning diameter: 32 mm max. circulation diameter: 32 mm spindle boring: 32 mm input Power: 5,5 kW max. turning moment: 18 NM range of revolution from: 200 rpm range of revolutions till: 8000 rpm Control: Fanuc 32i-B powered tools control Fanuc Scrapper chip conveyor Main and Sub Spindle Y-Axis C-Axes on Main and Sub Spindle Live Tooling Ndodpfxjzl Suhs Almea Complete Tool Package Top Infinity Automatic Bar Feeder Kraft & Bauer Automatic Fire Suppression System Chip Conveyor High-Pressure Coolant System

Condition: used, mileage: 538,126 km, power: 265 kW (360.30 HP), first registration: 02/2015, fuel type: diesel, number of seats: 42, gearing type: automatic, emission class: euro6, brakes: retarder, Equipment: ABS, air conditioning, * Our internal reference: 1147 * O 530 G C2 * Good condition! * 4 doors * Automatic transmission (1/2/3/D/N/R) * Retarder operated via brake pedal * Air conditioning compressor as new * ASR (Anti-Slip Regulation) Ndsdpfoxbmpxox Almoa * Kneeling function * Lifting/lowering function * Side windows double-glazed * Various hinged windows * Ramp at door 2 * Additional fuel tank +100 liters * Centralized lubrication system * Air reservoirs: aluminium * Battery charging socket * Previously equipped with video surveillance * Engine compartment fire detection system * Driver’s seat: rotatable, heated, air-conditioned (ventilated via fan), with armrests * Driver’s cab with partition screen * Cooling box, wall-mounted behind the driver’s seat * KONVEKTA air conditioning system * Additional climate control for driver’s workstation * Auxiliary heater with increased output * Roof hatches, electric * Heating water pipes, return insulated * Insulation of heating water pipes * Ticket validator preparation * Preparation for traffic light controller * IBIS signal amplifier * Destination display * Passenger compartment with LED lighting technology * etc. * Clean vehicle * The customer is obliged to independently inspect the condition and specifications of the goods/vehicle! * etc. * Vehicle may still be in use / mileage and condition may differ * All information subject to change * Subject to prior sale * Please refer to our general terms and conditions

Condition: used, maximum load weight: 35,575 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2014, loading space length: 7,900 mm, loading space width: 2,535 mm, loading space volume: 24 m³, total width: 2,535 mm, total height: 1,330 mm, Equipment: ABS, In accordance with our "General and Stipulated Terms and Conditions," and without any warranty or guarantee, we can offer you the following vehicle today, subject to prior sale, errors, and typing mistakes: Schmitz 20" Tank Container Chassis with Tank Container Schmitz Chassis (Vehicle 178) First registration: 27.02.2014 Permissible total weight: 39,000 kg Unladen weight: 3,425 kg Payload: 35,575 kg TÜV (MOT): 09/2024, Safety Inspection: 03/2024 Recorded mileage on odometer: 424,676 km Tube stowage compartment front passenger side 2 x 12 t gear support winches Fire extinguisher box Air suspension with lift & lower function ALCOA aluminum rims Tyres 385/65R22.5 1.) approx. 90/90%, 2.) approx. 40/40%, 3.) approx. 50/80% Wheel chock Price: €8,000.00 (net) Additionally: 20" Tank Container BURG Manufactured: 11/2008 Permissible total weight: 36,000 kg Unladen weight: 3,660 kg Payload: 32,340 kg Capacity: 24,000 liters External thermometer/ temperature display 1 compartment No baffle wall Ndjdpfx Ajzlcauslmea Outlet at rear Walkway on top Tank rubber-coated on the inside Not suitable for oils Suitable for saline solutions, AHL, and other liquids Price: €8,000.00 (net) Complete package: €15,000.00 (net) All information provided without any warranty or guarantee. Our "General and Stipulated Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €50,000.00 is the District Court of Ludwigslust, for higher values, the Regional Court of Schwerin. Errors, typing mistakes, and prior sale reserved.

Condition: good (used), Year of construction: 2013, 454 USED Wachtel Compact STIR Oven. Ndjdezlh E Ajpfx Almea TECHNICAL DATA: - Year of manufacture: 2013. EQUIPMENT: - Gas burner (can be oil-fired), - 2 baking trolleys. Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, overall weight: 4,200 kg, total height: 2,273 mm, spindle motor power: 24,000 W, spindle speed (max.): 7,000 rpm, number of axes: 5, This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm. Machine Benefits Qualitative Machine Benefits • Machine in very good, working condition, ready for test. Full documentation available. Nsdpozlqqbofx Almoda Technical Machine Benefits • Fire suppression system • Top oil mist filter • Max. Grinding wheel diameter: 200 mm Dimensions Machine Depth 2930 mm

Condition: good (used), Year of construction: 2006, Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons. Ndjdpfxohgkdqs Almoa

Condition: new, saw blade diameter: 1,000 mm, drive type: Elektro und Zapfwelle, The 40/20 CD+E saw-splitting machine cuts the log with a diameter of max. 40 cm with a circular saw blade and splits it with a splitting force of 20 tons. It is a combination machine (electric and PTO connection) Ndodpfevukuisx Almoa Demonstration and viewing possible by appointment - machine is currently in stock, available immediately

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 17,000 h, power: 7 kW (9.52 HP), temperature: 70 °C, inner dimension length: 6,000 mm, inner dimension width: 2,800 mm, inner dimension height: 2,500 mm, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, Incoplan DRY 6 model for sale. Capacity: 14-20 m3. Maximum wood length: 6000 mm. Ndedpoziwq Njfx Almea Bundle dimensions: 6000 mm x 120 mm x 120 mm. Number of bundles in the drying kiln: 4. Accessories: 8 m high chimney, manufactured in 2018. 2000 L hot water tank, manufactured in 2018. 100 kW wood-fired boiler, manufactured in 2000. The demolition is the responsibility of the buyer or seller, as agreed.

Condition: used, empty load weight: 5,636 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2022, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, color: red, Year of construction: 2022, Equipment: ABS, Tare weight: 5636kg, GVW: 35000kg, Cargo securing with certificate, Loading area (L W H): 13,620 mm x 2,480 mm x 2,730 mmTyre size: 385/65 R22.5, DIN EN 12642 (code XL) certificate, Loading area volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Fire extinguisher holder, Toolbox, Bolted chassis, Sliding roof, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Ndsdpezhpmtjfx Almsa

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm Ndodpfx Alswcdrvjmja

Condition: used, empty load weight: 5,636 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2021, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, color: red, Year of construction: 2021, Equipment: ABS, Tare weight: 5636kg, GVW: 35000kg, Cargo securing with certificate, Loading area (L W H): 13,620 mm x 2,480 mm x 2,730 mmTyre size: 385/65 R22.5, DIN EN 12642 (code XL) certificate, Loading area volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Fire extinguisher holder, Toolbox, Bolted chassis, Sliding roof, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Nodpfx Alozma R Temoda

Condition: new, functionality: fully functional, fuel type: diesel, color: red, fuel: diesel, Year of construction: 2026, operating hours: 3 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, trailer coupling, LX 401 CAB KUBOTA 4WD TRACTOR LX401 CAB, DEMO UNIT, AS NEW; NOT REGISTERED! CURRENTLY WITH 3.5 OPERATING HOURS With comfort cabin, Including 5-year manufacturer's warranty (up to 2,000 operating hours) Engine: 1,498 cm³, 4-cylinder Kubota diesel engine, CRS, EGR, DPF, Emission Stage V, Engine power according to EC 120 29.3 kW (39.8 hp), 4-valve technology, turbocharger, dual flywheel, fuel tank 32 l Transmission: 3-speed hydrostatic transmission, max. speed 30 km/h, automotive drive system, dual flywheel, cruise control 4WD: Engageable 4WD, Bi-Speed steering system, rear differential lock Comfort: flat driver's platform, fully hydraulic power steering, air-suspended comfort seat, 2 USB ports, storage compartment, cup holder, adjustable steering column, external rear PTO control Cabin: Spacious cabin, integrated 4-pillar construction, effective heating, air conditioning with recirculation mode, LED work lights front and rear, rear window heating, rear window wiper and front windshield wiper with washer system, 12V socket, radio preparation, rear fender extensions PTO: Rear PTO 540 rpm, mid-mount PTO 2,500 rpm, independently switchable Hydraulic System: Nedpfszf Dz Hsx Almeda Flow rate 20.4 l (work hydraulics), max. working pressure 160 bar, Rear three-point linkage Cat. I, lifting force at the lower link end 1,150 kg, Standard front equipment: 3 functions (single lever control unit with 1x double-acting control valve, 1x double-acting control valve with float position, changeover valve 3rd function), 6x hydraulic couplings (SVK according to ISO 7241-1-A BG3) Standard rear equipment (electrically switchable): 2 functions (1x double-acting control valve, 1x double-acting control valve with float position), 4x hydraulic couplings (SVK according to ISO 7241-1-A BG3) Drawbar Permissible unbraked trailer load: 1,500 kg Permissible braked trailer load: 3,500 kg Permissible vertical load: 500 kg Dimensions Overall length: 2,983 mm Overall height (depending on tires) 2,145 – 2,175 mm Wheelbase: 1,695 mm Weight (ROPS/Cabin) (depending on tires): 1,015/1,185 kg Max. front axle load (depending on tires): 1,080 kg Max. rear axle load (depending on tires): 1,920 kg Permissible total weight (depending on tires): 2,400 kg (with turf tires) IN ADDITION: - DAB+ radio with Bluetooth - Antenna splitter - Municipal tires front 220/55R14 - Municipal tires rear 320/70R20 - Front three-point linkage CAT 0 / hitch triangle - Front PTO cabin gearbox running in an oil bath with a multi-disc clutch, can be shifted under load, rated speed 1,000 rpm, standard profile 1 3/8“, 6-piece, direction of rotation left when viewed in the direction of travel - Headlights top, for winter service - Rotating beacon LED - Front fender set 215 mm - Rear fender extensions - Height-adjustable drawbar - Automatic drawbar for height-adjustable drawbar - SAFETY EQUIPMENT KIT Consisting of: multi-purpose lamp, fire extinguisher, combination bag with first aid kit, EC warning triangle, warning vest according to EN 20471 Class 2 Current list price Euro 63,000,- plus VAT. Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made excluding any guarantee or warranty.