Used Folding Tool Cabinet for sale (42,623)

Year of construction: 2022, condition: used, Used machine Window joint cutter Nsdpfx Aeyq T I Iocnjcu Features and technical data: - Power input: 1900 W - Output power: 1220 W - No-load speed: 7800 rpm - Milling disc max.: 170 mm - Cutting depth: 0–55 mm - Cutting height/joint width from 4.7 mm - Cutting height adjustment in 2 mm increments - Minimum distance to lower support surface: 2.5 mm - Swivels 180° - Spindle thread: M 14 - Weight: 4.5 kg - Sound pressure level LpA: 99 dB(A) - Sound power level LWA: 110 dB(A) Availability: short-term Warehouse location: 63934 Röllbach

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 13 pieces -Type: various designs, see photos -Price/Fee: complete -Transport dimensions: 400/400/H80 mm -Total weight: 24.5 kg Ncjdpfxjzdyp Re Acneu

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Nodozdn H Ropfx Acnecu Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 2009, Horizontal: Yes Vertical: Yes Diameter: 220mm indexing: 360.000° Centre height:220mm Control system:Siemens 840D Length: 600mm Width: 400mm Ncedpfjwvq Tasx Acnou Height: 800mm Weight: 200kg

Condition: used, Year of construction: 2008, measuring range X-axis 320 mm measuring range Z-axis 720 mm - - - - - - - - - Tool presetter | DMG MICROSET - VIVA 720 The tool presetter is in a well-maintained condition. Njdpozd Hdzefx Acnjcu Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VIVA720 | VIVA-720

Condition: used, Year of construction: 1982, sheet width 3100 mm plate thickness 2 mm 90 mm Nedpfx Acjyv I T Djnocu adjustable bending rolls 90 mm weight of the machine ca. 4000 kg

Condition: used, Technical Specifications Article number: M100001418 Operation: CNC without mechanical handwheels Control system: CNC contour control DECKEL Contour 3 Spindle speed: 63 - 3150 rpm Feed rate: 2-3000 mm/min, continuously adjustable Rapid traverse rate: 3000 mm/min Power: 4.4 kW Tailstock: Extendable tailstock, vertical 80 mm, SK40 Clamping system: DIN 2080 or DIN 69872 Axes: X/Y/Z 485/385/380 mm Tilting table: Rigid tilting table 800 x 460 mm, max. load 400 kg Hydromechanical clamping system SK40 with draw bolts DIN 2080 or DIN 69872 Vertical and horizontal spindle Milling head: Manually swiveling +/- 90 degrees Programming: Deckel Contour 3 - Dialogue-guided programming with versatile machining cycles. Ncodpozfpicofx Acnju

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature control chamber. Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Ncedpfxjzdtd Io Acneu Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404 A / R 23 Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.8 kW Rated current: 12 A Type: VT 7011 For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a BIA multi-functional cabinet. BIA multi-functional cabinet Temperature range: +15°C to +30°C and humidity Refrigerant: R-404A 230V 50Hz 10A Type: C890TH For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After a successful check, the chambers are subjected to a test run, which is monitored with calibrated devices. Ncsdpfx Acozdtbgonju Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer a Heraeus heating and circulating air drying cabinet. Heraeus heating and circulating air drying cabinet up to 300 °C Manufacturer / Type: Heraeus UT 6060 Features: Temperature range: 300°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage 230V, Rated frequency 50/60Hz, Rated current 6.8A, Rated power 1.50kW Includes 2 inserts Type: UT 66060 Ncsdjzdr Dyopfx Acneu Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2003, pressure max. 8,24 BAR Receiver 2,8 L Temperature range max. 50°C - min. 0°C °C In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Ncedpfx Aew S Nk Uecneu Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2007, chuck outer diameter: 600 mm, through hole: 120 mm, Metal cutting Tooling ROHM - SDT Ncsdszdiwyjpfx Acnou MACH-ID 2965 Make: ROHM Type: SDT Year: 2007 Diameter: 600mm 4 chuck: x Spindle bore:120mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2968 Make: TOS Type: SN / SIU Max. Diameter 250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ncsdpfx Acszdiv Aonou

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2969 Make: TOS Type: SN / SIU Year: 90 Ncodjzdiuxjpfx Acnou Max. Diameter 150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Metal cutting Tooling CU 1000 MACH-ID 2981 Type: CU 1000 Year: 2006 Max. Diameter 300 Ncsdpfozdipzox Acnou Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1989, chuck outer diameter: 350 mm, through hole: 100 mm, Metal cutting Tooling LAMBERTINI - 350 MACH-ID 2993 Make: LAMBERTINI Njdpfxezdil Ao Acnjcu Type: 350 Year: 1989 Diameter: 350mm 4 chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, chuck outer diameter: 400 mm, through hole: 100 mm, Metal cutting Tooling ROHM - 400 MACH-ID 2994 Make: ROHM Type: 400 Year: 2007 Ncjdpfxezdilpe Acnou Diameter: 400mm 4 chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), three-jaw chuck diameter: 380 mm, through hole: 100 mm, Metal cutting Tooling POINTER - 380 SL Ncsdpfx Aezdii Iscneu MACH-ID 2995 Make: POINTER Type: 380 SL Diameter: 380mm 3 Chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, chuck outer diameter: 250 mm, through hole: 100 mm, Metal cutting Tooling CBT - 250 MACH-ID 2996 Make: CBT Type: 250 Year: 2013 Diameter: 250mm 3 Chuck: x Spindle bore:100mm Connector: 70 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ncodpfx Aezdiihocnou

Condition: good (used), Year of construction: 1999, chuck outer diameter: 250 mm, through hole: 75 mm, Metal cutting Tooling ROHM - 250 MACH-ID 2997 Make: ROHM Type: 250 Year: 1999 Ncsdezdih Djpfx Acnsu Diameter: 250mm 4 chuck: x Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, chuck outer diameter: 300 mm, through hole: 70 mm, Metal cutting Tooling MANDELLI - 200 Ncedpfozdig Uox Acnou MACH-ID 2998 Make: MANDELLI Type: 200 Year: 1998 Diameter: 300mm 4 chuck: x Spindle bore:70mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), chuck outer diameter: 310 mm, Metal cutting Tooling PRATT BURNED MACH-ID 2999 Diameter: 310mm Njdpfx Acozdigbsnocu 4 chuck: x Spindle bore:74mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), through hole: 50 mm, three-jaw chuck diameter: 200 mm, Metal cutting Tooling CBT - 200 Ncedpfxezdifwe Acnou MACH-ID 3000 Make: CBT Type: 200 Year: 2001 Diameter: 200mm 4 chuck: x Spindle bore:50mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), three-jaw chuck diameter: 200 mm, through hole: 55 mm, Metal cutting Tooling CBT MACH-ID 3001 Make: CBT Year: 2014 Diameter: 200mm Nedpfx Aszdid Tjcnjcu 3 Chuck: x Spindle bore:55mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), three-jaw chuck diameter: 250 mm, through hole: 75 mm, Diameter: 250mm 3 Chuck: x Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ncjdpfozdidtsx Acnsu