Used Gastronorm Containers for sale (5,632)

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (as good as new!!) Dyemansion Powershot C blast cabinet Surface-friendly cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated depowdering increases your production capacity With the Powershot C, a medium-sized installation space can be depowdered in just ten minutes. The time you need for parts cleaning, and personnel in your production can be significantly reduced. This increases your efficiency. Lhodpstq E N Ejfx Agrop By investing in automated depowdering with the Powershot C up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blast cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High ease of use with improved ergonomics and process control Experience a new level of process control with touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of the process parameters via control panel and touchscreen. PERFORMANCE: Processing time: Variable from 1 to 40 minutes, usual throughput time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or nearly 1.5x full Stratasys H350 build space Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: Power 1kW Requirements 3x400V> 1kW 50Hz 2,5A PRESSURE AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), functionality: fully functional, input voltage: 220 V, year of last overhaul: 2025, total height: 220 mm, total length: 420 mm, total width: 380 mm, type of input current: AC, input current: 10 A, Tempering device, benchtop unit Model: TG 05-2 W Containers approx. 2 x 4 liters Stainless steel construction Electronic temperature control Connection: 230V Dimensions: 380 x 420 x 220 mm (W x D x H) Used unit, cleaned Ljdpfjt A Abyox Agrohp More devices in stock!

Condition: used, axle configuration: 3 axles, first registration: 03/2007, total length: 11,400 mm, total width: 2,550 mm, total height: 1,700 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,260 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Lhjdpfx Aoxwkagegrop Number of axles: 3, Payload: 33,190 kg, Curb weight: 5,810 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year of manufacture: 2007, Container positions: 2x20 + 1x30 + 1x40 + 1x45 high cube, Extendable chassis: front / rear, Axle type: SAF = Further Information = General Information Cab: Day cab License plate: OJ-79-SF Powertrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 13 mm; Tire tread right: 9 mm Axle 2: Tire tread left: 8 mm; Tire tread right: 8 mm Axle 3: Tire tread left: 8 mm; Tire tread right: 8 mm Weights Unladen weight: 5,810 kg Load capacity: 33,190 kg Gross vehicle weight: 39,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are arranged quickly • Expert technical services • The security of 'recognizable quality' • And more... Visit our website for special offers and the complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), Waste compactor, waste compactor, compactor container, waste container, self-compacting container, waste compactor, paper compactor container, paper container, cabinet compactor, vertical baler -Manufacturer: DIXI, Cabinet baler, vertical baler -Type: 15 S -Drive power: 4 kW -Pressure pressure: t -Interior dimensions 1100x690x1370 mm -Transport dimensions: 1540/950/H1970 mm Ljdpoxwuilsfx Agrjhp -Weight: 834 kg

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 8,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 980 mm, 20 x lashing eyes each 6 t, 20 x lashing brackets each 6 t, 18 x lashing holes, 7 x stake pockets, central, 14 x stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, plug-in price: 1,500 ¤, surcharge for extendable drawbar price: 1,500 ¤, surcharge for 4 x warning signs with lighting price: 800 ¤, , Also available in loading area length 7,600 mm!, , --  Misprints, errors and changes excepted, sample images --, More data at: !, More details: ! Lhedpfx Agjxxk I Hjrjp

Condition: used, Year of construction: 2010, operating hours: 944 h, Articulating Boom Lift JLG E450 AJ - Working height: 16 m - Platform height: 14 m - Lateral outreach: 7.5 m - Year of manufacture: 2010 - 944 operating hours (as indicated by meter) Lodpjwvdamefx Agrshp - Powered by 48 Volt electric motor with integrated charger - Tyre size: 240x55x17.5, tread depth 4-9 mm - Wheelbase: 1,980 mm - Drive configuration: 4x2 - Overall dimensions (L x W x H): 6,600 x 1,750 x 1,980 mm - Weight: 6,697 kg - Platform load capacity: 230 kg - Rotatable basket, hydraulic jib arm 1,250 mm - Basket dimensions (L x W x H): 1,460 x 580 x 1,100 mm - Basket and ground controls Further information and additional pictures available on request. This description does not constitute a binding offer and may contain errors. No guarantee is provided for all details. Please also visit our website at

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application Lsdpfx Aed N Erpogrshp The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, mileage: 117,608 km, power: 92 kW (125.09 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 09/1991, loading space length: 2,350 mm, loading space width: 2,100 mm, loading space height: 450 mm, number of seats: 3, Year of construction: 1991, total length: 5,200 mm, total width: 2,350 mm, total height: 3,370 mm, Equipment: crane, had accident, Unimog with Tipper, Winch, Recovery Supports, and Crane U1250 - 427/11 * Unimog 1250 - 427/11 * First Registration: 09/1991 * Hours according to meter: 6,587 * Mileage: 117,608 km as per odometer reading * 5,958 cc engine with 92 kW (125 hp) * 16-speed manual transmission * Driver's cab with 3 seats * Tire size: 365/80 R20, tread depth 14-16 mm * Wheelbase: 3,300 mm * Gross weight: 7,490 kg (downgraded), unladen weight: 6,960 kg, axle load front: 4,400 kg, rear: 4,400 kg * ABS, radio, differential lock, power steering, wheel chocks * Dimensions (L x W x H): 5,500 x 2,265 x 3,400 mm * HIAB 050 crane with cable remote control * 3-way tipper non-functional due to weight downgrade, 230 cm x 210 cm x 45 cm with steel side walls * 40 mm towing jaw * 2x rear recovery supports * Winch, hydraulics front and rear * Transmission is damaged, drives only in low range * Dashboard damaged, rust damage in driver's cab—see photos Lhodpfxjxpl Eze Agrop Further details and additional photos available on request. This description does not constitute a binding offer and may contain errors; no guarantee is given for all specifications. Also visit our homepage at

Condition: good (used), Bühler Type: FPML2 Premium Bühler laboratory agitator mill PML 2 PML 2. The universal agitator mill for the laboratory. The PML2 universal laboratory agitator mill is the flexible platform for process for process development on a laboratory scale. It has a modular design and is ideal for Lhodpfx Ageuz Umyersp R&D testing of low to medium viscosity products in a wide range of applications. Application examples: High-quality coating systems: Automotive OEM & Refinish Anti-corrosion coatings Industrial coatings Displays & Electronics: Color filters for display technologies Metal pastes Ceramic pastes Glass pastes Printing inks: Inkjet inks Liquid inks Liquid toners Specialty chemicals_ Agrochemicals Pigment concentrates TiO 2 -dispersions Adhesives and sealants Technical data Machine data Active grinding chamber volume: 0.2 ... 1.2 dm3 Volume of sealing liquid tank: 2.4 dm3 Sealing liquid pressure: max. 7 bar Agitator Motor shaft power: 2.2 kW at 3000 min-1 Rotor speed: 500 ... 4500 min-1 Note: Only operate the rotor within the specified speed range. The rotor speed influences the productivity and service life of the processing zone. Unnecessarily high speeds can lead to premature wear, excessively low speeds can lead to insufficient cooling of the mechanical seal. Machine dimensions: Depth 458 mm Width 617 mm Height 862 mm Cooling water inlet, G½" Cooling water outlet, G½" Compressed gas connection, G¼" Control cabinet: Control cabinet for wall mounting, only for machines with approval for potentially explosive atmospheres. Height: 850 mm Width: 650 mm Depth: 300 mm Rated current 400V 50Hz PH 3+N-PE 16 A Weight Machine: 150 kg Peristaltic pump: 30 kg Gear pump: 25 kg Laboratory peristaltic pump: 8 kg Attachable container: 5 kg Tub: 1.5 kg Documents & Downloads Data sheet: Operating instructions Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, mileage: 117,608 km, power: 92 kW (125.09 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 09/1991, loading space length: 2,350 mm, loading space width: 2,100 mm, loading space height: 450 mm, number of seats: 3, Year of construction: 1991, total length: 5,200 mm, total width: 2,350 mm, total height: 3,370 mm, Equipment: crane, had accident, Unimog with Tipper, Winch, Recovery Supports, and Crane U1250 - 427/11 * Unimog 1250 - 427/11 * First Registration: 09/1991 * Hours according to meter: 6,587 * Mileage: 117,608 km as per odometer reading * 5,958 cc engine with 92 kW (125 hp) * 16-speed manual transmission * Driver's cab with 3 seats * Tire size: 365/80 R20, tread depth 14-16 mm * Wheelbase: 3,300 mm * Gross weight: 7,490 kg (downgraded), unladen weight: 6,960 kg, axle load front: 4,400 kg, rear: 4,400 kg * ABS, radio, differential lock, power steering, wheel chocks * Dimensions (L x W x H): 5,500 x 2,265 x 3,400 mm * HIAB 050 crane with cable remote control * 3-way tipper non-functional due to weight downgrade, 230 cm x 210 cm x 45 cm with steel side walls * 40 mm towing jaw * 2x rear recovery supports * Winch, hydraulics front and rear Lodsxpl Enopfx Agrjhp * Transmission is damaged, drives only in low range * Dashboard damaged, rust damage in driver's cab—see photos Further details and additional photos available on request. This description does not constitute a binding offer and may contain errors; no guarantee is given for all specifications. Also visit our homepage at

Condition: excellent (used), Handle UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface jet curing system, developed for curing light-curing adhesives with UVA rays and visible light. It is suitable for manual curing of individual parts during the production process as well as for laboratories. The following is integrated in the device a control unit with integrated mains switch and operating hours counter a lamp housing with the burner reflector ignitor. In with UV protection box Features: Contains 400 W metal halide lamps Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected service life of the UV lamp up to 1000 h The power supply unit can be detached from the lamp module and operated separately Adjustable lamp height for optimum irradiation With glass filter to avoid short-wave UVB/UVC emission Technical data: Lodpfxotv H A To Agrehp Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube miniature fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with base on both sides Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm 472 mm 300mm Ambient and operating temperature + 10 °C ... + 30 °C Storage temperature - 10 °C ... + 60 °C Weight ~ 11.5 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: used, EOS Type: P100 Technical Data: External dimensions: 1320 mm x 1067 mm x 2204 mm Technology: SLS Lodpsxpux Rjfx Agrehp Material class: Polymers Materials: PA220 Build volume: 200 x 250 x 330 mm Laser type: CO2; 30 W Capable of producing delicate components with wall thicknesses down to 0.4 mm. Fits through a standard door (1067 mm width); therefore, it can be installed in regular premises. + 6 filled powder containers PA2200 (PA12) + 2 build frames 400 V +6%/-10% at 50/60 Hz; CEE 5-pole Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, Lhedpfx Agouigrzjrep heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Areas of application: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production medical technology Food industry Research and development Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Power consumption: 400Volt/ 50 Hz 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P385 The EOS P385 system includes the following Installation space container Powder container Cooler: Termo TEK Termochiller 1100 The following upgrade has already been performed : Lhjdpfx Asf Ey Eajgrsp Software: CD's Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialice: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser change 15.05.2008 X Drive Motor. Change of used engine 04.05.2020 Pyrometer change 30.06.2020 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V A, frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT Upgrade P385 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 Lhedpoft R Swofx Agrjp The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: used, Zeiss Type: EVO 50 XVP The instruments of the EVO product family combine powerful scanning electron microscopy with an intuitive operating concept that is equally well suited to experienced users and novices. Thanks to its extensive options, EVO can be precisely tailored to your requirements, regardless of whether you work in the life sciences or materials science or in routine industrial quality control and failure analysis. Scanning electron microscope EVO 50 XVP, EDX from Oxford Xplore 30 SDD detector without N cooling 05/2021 Dimensions: DxLxH 930 x 1930 x 1600 mm 30mm 2 sensor size / resolution 129MnKa at 100,000cps From boron - califonium Software AZtec lite on Windows 10 With drift correction Analyser quali-quanti-analysis Lhsdovvtnbjpfx Agrep Point ID Mapping Line scan Damping system included each container carries 116kg/bar Operating hours approx. 11,500 hours PC upgrade to Windows 10 05/2021 The scanning electron microscope is fully functional. Weight 750 kg + 385 kg +150 kg Condition: used (Changes and errors in the technical data, information are reserved!) Please ask about the transport options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a GRIESER tripod dissolver laboratory. Product: Grieser laboratory tripod dissolver Type: GFD 11 LST Purpose: The machine is designed for mixing of powdery solids, liquids and pastes as well as to the work of fillers. The viscosity range can be from low viscosity to Pasty range. Machine design: The laboratory stand dissolver consists of machine frame, the Lifting device, the drive for mixing tool, the telescopic hood with Spring contact pressure, the Collet and the control panel (non-ex) with control and compact controller. The container (customer) and the telescopic hood form one in working position closed mixing room. The hood is intended, a hose connection It is used according to the purpose. The drive of the mixing tool with a speed adjustment is by means of Lhjdjd Edm Sepfx Agrjp Frequency converter fitted. The arrangement, performance and speed of the Motors are indicated in the enclosed drawing of the project. On the display of the compact controller can the speed of the mixing tool, the Mixing time / mixing time, mixing sequences, as well as other functions are displayed be. Operation Switching on and off is done via corresponding buttons in the control cabinet Lifting of the mixing tool drive Lifting is carried out of the hub motor is switched on. This runs only as long as the Push button (2-hand safety circuit on-on) is pressed. After releasing the button

Condition: excellent (used), Here we offer an Eos EOSINT plastic laser-sintering system. Lhsdpfx Agegqux Nsrjp The following things are included in the EOS P380 system Construction space container Powder hopper Overflow container Cooler: Termo TEK Termochiller type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse protection 32 A MAX. Laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Lhedpfx Aoucd Rbjgrep Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Rofin Type: PowerLine Pico 532 - 10 CombiLine Basic WT VLM - Visual Laser Marker VLM is an innovative, flexible marking software that is used on Rofin laser systems. laser systems. VLM follows the WYSIWYG concept and offers the flexibility of a the flexibility of powerful yet easy-to-use software. VLM can be used to apply markings of various types such as matrix codes, barcodes and serial numbers, barcodes and serial numbers. Depending on the material, even the smallest markings are possible. The innovative software ensures reliable marking of reliable marking of flat and curved surfaces, and οη-the-fly applications are also possible. Common formats such as DXF or optionally PDF are supported for importing layouts. Technical data of the laser: Laser head Wavelength: 532 nm Power: approx. 3W at 400 kHz Pulse frequency: 200-800 kHz, Beam quality: TEMoo Energy per pulse: 7.5 μJ at 400 kHz , 3.5 μJ at 800 kHz Peak power: 7.5 kW at 400 kHz Dimensions: approx. 450 mm X 168 mm X 235 mm (L X W X H) Weight: approx. 14 kg (with standard Galvo RM10) 19" supply unit Dimensions: 2HEx19''x350 mm(HxWxD) Weight: approx. 20 kg Cooling: integrated air cooling Supply voltage: 115 - 240 V +/-10%50 ا Hz / 60 Hz Power consumption: approx. 800 W Ambient temperature: 15°- 35°C, non-condensing Air flow rate: 80 m³/h PC Mini-ΙΤΧ SSD removable disk 250 GB Software at least VLM 5.2 Windows Embedded Standard 7 Other options 19" panel can be removed Positioning aid Adjustable 3-foot support The following components were additionally selected from the standard scope of delivery: Ρ255-532 lens ٢= 255 mm: 532 nm Labeling field 180 mm X 180 mm S10-532 Galvo head unit S10: 532 nm Galvo head S10 including selected objective, holding set for optics and protective Ljdpfx Agjtz Rk Herohp protective glass or protective glass slider. Size: approx. 165 mm X 118 mm X 147 mm (L X W X H) Weight: approx. 4.4 kg CombiLine Basic (V2): The CombiLine Basic is a user-friendly laser class 1 system (in accordance with EN 60825-1 ), which, thanks to the use of largely preconfigured functional preconfigured function modules, enabling optimum adaptation to customer-specific requirements. The frame contains all control components and functional elements. functional elements. An aluminum plate with standard or customer-specific workpiece holders, an aluminum plate with a standard drilling pattern serves as the basis. The fully automatic, electrically operated door enables workpieces to be loaded and unloaded. The machining area can be viewed at any time through the large observation window. A programmable z-axis, including control and motor, is included as standard, is used for vertical focus adjustment. This takes place in automatic mode according to the specifications of the marking program. Technical data: Dimensions: approx. 1200 mm X 1750 mm X 800 mm (W X H X D) Door opening: approx. 560 mm X 680 mm (W X H) Weight: max. 380 kg Connection: 230V+/-10%: 1/Ν/ΡΕ Power: max. power consumption 3 kVA Monitor: 15" TFT with touch function Z-axis: max. 300 mm stroke Workpiece: max. 20 kg Weight (incl. holder) max. 690x 490x 293 mm (W x L x H)

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Lhsdpfxoxp Iybe Agrjp Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: excellent (used), Here we offer you Defensor steam humidifier. Defensor Mk5 Resistance Steam Humidifier Steam humidifier Defensor Mk5 Ledpfx Agsnyh T Dsrshp The Defensor Mk5 steam humidifier is built according to the current state of the art and the recognized safety regulations. Nevertheless, in the event of improper use of the Defensor Mk5 steam humidifier, hazards may arise for the user and/or third parties, and/or or material assets may be damaged. To ensure safe, proper and economical operation of the Defensor Mk5 steam humidifier, please observe and comply with all the information and safety instructions contained in these installation and operating instructions. Defensor Mk5 type series Visual For indirect or direct room humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 max. steam capacity in kg/h 80.0 400V/3~/50...60Hz Mk5 ... 80 unit A: 40 kg/h unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), AdBlue refueling truck Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle operation: with the MOBILUS-AdBlue, the safe refueling of your vehicles is possible in a safe and economically efficient manner. The MOBILUS AdBlue mobile refueling system complies with all relevant technical and legal regulations and is therefore often used in research and development projects. Convince yourself of the quality of this mobile urea refueling device. Technical data: Manufacturer: Rietbergwerke GmbH & C0. KG Type: HT-Mobilus 200 AdBlue Year of construction 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135cm Empty weight: approx. 260kg Useful volume tank: approx. 175 liters Power supply: Connected load: 3.0KW Supply voltage: 400/230V / 50 HZ NPE Fuse protection: 16A Heating: Connected load: 4.0KW Supply voltage: 400V Delivery pump: Output: 0.75KW Supply voltage: 400V / 50 HZ Further technical data: Suction and circulation pump: Power: 0.4KW Lhedsrp Enmepfx Agrop Supply voltage: 230V / 50 HZ Dispensing valve: Volume flow: max. 40l/min Operating pressure: 0.5 - 3.5 bar Control range: Volume flow: 3.5 l/min. - 45.0 l/min Temperature: 15°C - 45°C Frequency converter: 1,800 1/min BNC sockets: Output: 0 - 10V Operating temperature Operating temperature: max. 45°C Storage temperature: down to -30°C Materials Container: LDPE All other components in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: not inspected (used), Bluhm Systeme marking lasers Here we offer you a Bluhm Systeme marking laser. Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested) Introduction: The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825 and EN 60825 (standards for end-user applications). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a protection class product in accordance with the above-mentioned directives. The e-SolarMark is a laser system for marking and engraving plastics, metals and foils while stationary or in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. the marking unit with laser head (scanning head) with focusing lens. 2. the control unit contains the power supply unit, electronic control system and firmware for the system function, I/O slots inside. The e-SolarMark includes a fixed galvo scanning head equipped with a lens for a square marking field with standard dimensions of 70 X 70 mm Laser specification in standard version Laser Type---Fiber Laser Laser output power---FL2 model: 19W; typical Wavelength---1062 nm typical Internal Modulation---20 to 80 kHz Scanner Head Description: Scan Head---Two galvanometric mirror scanners with hard, highly reflective dielectric coating. F-Theta Lens types and their characteristics: Lens marking field 70x70 mm to 300 x 300 mm Focus distance B 192 mm Working environment Conditions: Ledpfx Aeq Rtz Hegrjhp Relative humidity up to 80% non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length marking/control unit 3 m Weight marking unit 5 kg Weight of control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption FL2 model 450W Type: e-SolarMark FL Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Lhedorbiyfepfx Agrjp Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.