Used Glasses for sale (3,365)

Condition: excellent (used), Year of construction: 2016, 2600x1600 Hjdpfxszcawte Aqrop The machine has been in continuous operation on a single shift and has very low operating hours. It is available for collection in Wrocław.

Condition: used, Year of construction: 1999, Good Lisec extruder. Year: 1999 Hodpfezavm Esx Aqrop Condition: as is.

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica filling line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum fillingBottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage pr.. Hsdpfx Aqoy Szcwerop

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass filling line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements ... Hedpfx Aey Szb Hoqrop

Condition: defective spare-parts repository (used), Year of construction: 2005, functionality: not functional, SALVUE, on behalf of our client, is offering this Forel SAHM20 insulating glass manufacturing machine (year of manufacture: 2005) in defective condition. The machine has sustained water damage due to rainwater ingress from the ceiling. If you have any questions or need more information, feel free to send us a message or give us a call. Hsdsy Ucm Aopfx Aqrjp

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Hodsx Trg Ajpfx Aqrsp

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 6,600 mm, total width: 1,000 mm, total height: 2,500 mm, input voltage: 380 V, I. SINGIP PERIMETER GLASS GRINDER MODEL SZM 8 Perimeter glass grinder from SINGIP (China), model SZM 8 (6 peripheral wheels), year of manufacture: November 2021 – designed for grinding the edges of flat glass sheets of various sizes and thicknesses. The first three diamond wheels are used for coarse and fine grinding; the remaining three wheels are for polishing the glass. Depending on the selected wheel set suited for the glass thickness, the required edge profile (BEVEL or Pencil Edge) is obtained. The grinder is in very good condition—ideal for quick processing of glass with consistent thickness, currently dismantled. Hodpfew T Rphox Aqrop Model: SZM 8 Minimum dimensions of workpieces: 100 x 100mm Glass thickness: 3–12mm Processing speed: 0.5m/min to 2.5m/min Dimensions (Length x Width x Height): 6600 x 1000 x 2500mm Installed power: 16kW Power supply: 380V, 50Hz

Condition: good (used), Year of construction: 2014, Glass grinder BOVONE ELB 10-45 BEVELING MACHINE - BOVONE ELB 10-45 - GLASS THICKNESS UP TO 60 mm - WASHER + Brush ----- Hedpfx Aoulac Hsqrep TECHNICAL DATA Speed: 0,35-5,4 m/min Glass thickness: 2-30 mm OPTION 60 mm Bevel: 0-45° Bevels: 5 mm max Min. glass dimension: 12 mm thick edge 65 x 65 mm bevel 22.5° 85 x 85 mm bevel 45° 105 x 105 mm Gr. 30 mm edge 80 x 80 mm bevel 22.5° 100 x 100 mm bevel 45° 140 x 140 mm Installed power: 31.5 kW Weight: 4950 kg Height of working panel: 920 mm Dimensions: length: 8200 mm width: 1200 mm H: 2900 mm Voltage: 24 V

Condition: good (used), - Type: GS - 250 - serial no.: 14 - Year of construction: 1999 - Dimension min.: L1100mm x W800mm x H900mm - max.: L1700mm x W1300mm x H900mm Hodpfx Aqorgqp Nsrep - Power type: 1 x 220V / 50HZ / 7.8 A - Connected load: 1500w / 2800 MIN - 1 kW - Price on request

Condition: like new (used), Year of construction: 2015, functionality: fully functional, overall weight: 450 kg, Alba Drive EBUDAH 001 Function of the machine: during the production generated glass waste can you cutting safe and free from accidents, the waste can be collect in the under located - with forklift movable - emptying container. Hjdpfxod Nfb Ue Aqrjp Size of workplace Length: 3500 mm Height: 1800 mm Width: 3000 mm Electric demand: 2,7 KW Supply voltage: 3x400 V Phase number: 3 The main components of the machine: - breaking unit - loading-tilting table - passive accident protection fence - control cabinet with power disconnect swith - air preparation - keypad unit If you need more information, We're here to help! Please contact us on the contact form or call us!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical glass washing machine 1600 mm open top working direction from right to left Hjdpfx Asxyhntjqrop number of brushes : 4 glass thikness : 3 - 20 mm total lenght : 700 cm

Condition: good (used), - Year of manufacture 12/77 - Serial number: 3241 Hjdjr Nvgnjpfx Aqrjp - Belt size 100 x 1830 mm - Dimensions 1650 x 1200 x 100 mm (HxWxD) Price on request

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Shape float glass cutting table with low-e deletion Maximum glass size: 6100 x 3300 mm "4 in 1" - with tilting, cutting, breaking and low-e deletion Glass thickness: 2 - 19 mm Overall dimensions: 7000 x 4000 mm More technical information can be found attached as Tech. data file In very good and clean condition Good working order, tested See video As is Hedpfxjzaz Uue Aqrsp Available immediately

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total length: 43,000 mm, total width: 4,000 mm, total height: 2,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec insulating glass line 4500 x 2000 mm, year 1989/2007, consisting of following machines: - AKL-20V, edge grinding machine - RTVN-27/20WE, washing machine inlet conveyor - RTL-20B, washing machine with 6 brushes for low-e, including a sand filter and a hot water tank as well as a blower - RSV-38/20, frame set section - PSL-35/20V, assembling station - RTVN-16/20MZU2, measuring section for gas filling press - FPS-35/20U2B, gas filling press for Argon, can do assembling of 4,5 m long units, gas filling up to 3500 mm length - RTVN-11/20, outlet conveyor of gas filling press - UKL-35/23VA, tilt table for line discharge of 90° - KFL-35/22, horizontal glass conveyor - RTVN-16/20VFE, short inlet of sealing robot, including measuring device for glass and frame - VL-1N/20, sealing robot, including option for triple units - DOS-1PU, dosing and metering station, modified to PS Hedpsza Hckofx Aqrsp - VLA-25/20, extension of sealing robot The machine is in very good condition and will be available by the end of June 2026.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: GG11OC-11407, total length: 8,100 mm, total width: 1,400 mm, total height: 2,700 mm, overall weight: 3,390 kg, For sale: professional Bottero 110 FC glass edging machine, designed for straight-line grinding and polishing of flat glass edges. This machine is ideal for glass processing plants, manufacturing facilities, and producers of glass components for furniture, doors, balustrades, and shopfronts. Technical Specifications: - Number of grinding wheels: 10 - Glass thickness: 3–50 mm - Minimum glass size: approx. 40 × 40 mm - Feed speed: 0.6–6 m/min - Installed power: approx. 27.5 kVA - Machine weight: 3390 kg - Approximate dimensions: 8100 × 1400 × (height) 2700 mm This machine is manufactured by Bottero, a renowned Italian brand known for durable and reliable solutions for the glass industry. A major advantage is the easy access to service and the wide availability of spare parts on the market. Hedpfjyr Ax Esx Aqrop If you have any questions, feel free to contact me.

Condition: good (used), - Type: FP 6 glass grinding machine with 6 spindles Hsdpfx Ajq Dzpvjqrep - Serial number: 22 - Year of construction: 2002 - Glass thickness: 2 - 25 mm - Min. glass dimension: 80 x 200 mm - Machine dimensions: 5200 x 1200 x 2800 mm - Weight: 1500 kg - 2 diamond wheels for edge - 2 polishing wheels for edge - 1 combined wheel each for front and rear seam - Connected loads: 380V, 50Hz, 8.8 kW - Offer price 4.500 € free truck loaded

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Hedpfxow Tbgdo Aqrop Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labeling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labeling stations - bottle transport Additional title: years of manufacture: 1975 - 1979 Capacity: 9000 bo/h Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Hedpfx Aqsw Tmt Asrjp Features: empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle transport

Condition: used, Bottling line for approx. 5000 bottles/h Additional title: years of manufacture: 1990 - 2016 Capacity: 5000 bo/h Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l Hjdpfx Asw S Tqfoqrjp Features: Empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) Bottle filler and capper (Hormes), swing stopper capper (AMS, 1997, 15 capping units, 6,000 bph), Labeling machine (Gernep, 2014, 9000 bph), bottle transport

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head Additional title: Years of manufacture: 1975 - 1990 Capacity: 9000 bottles/h Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: De-capper; de-crater; crate washer; bottle washing machine; empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle crater Hedevcq Avopfx Aqrep

Condition: used, Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type "ML667") - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system) Additional title: hot filling, with pasteurisation Capacity: 5000 bo/h Formats: 0.25 liter bottles, twist off caps Hsdpfx Aqswgc R Esrop Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

Condition: used, Year of construction: 1990, Bottle filler for approx. 8000 bottles/h Additional title: Filling and capping machine Capacity approx.: 8000 bottles/h Formats: 0.5 l Euro bottle, 0.33 l longneck bottle, 0.5 l goiter neck bottle Hjdpfxew S T H Te Aqrjp Position: free standing Features: 1 pre-evacuation, short tube filling, crown cork capper

Condition: used, Year of construction: 2000, Bottle filler Manufacturer: Krones Short tube filler with double pre-evacuation Model: Mecafill VKVP 084-094 Year of manufacture: 2000 The capper runs with twist-off and standard crown corks Additional title: Filling and Capping machine Capacity: 30000 Bottles/h Length: 7000 mm Width: 4500 mm Height: 3800 mm Formats: 0.5L NRW, 0.33L Vichy, 0.33L Euro, 0.35L Lemonade Machine partitioning: 84 filling valves, 12 cappers Running direction: right -> left Operation / Control: Simatic Material: mostly stainless steel Position: free standing Base construction: Square frame construction on domes Features: 1 capper for standard and twist off crown caps, 84 filling valves, 12 cappers, protective housing with glass doors, vacuum pump Hsdpjw Tay Aefx Aqrjp Periphery: Crown cap feed, fill level control,

Condition: used, Year of construction: 1984, with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydraulically controlled bottle carrier and pressed against the sealing cone on the filling valve. The valve sleeve moves as far as it will go in the valve body, opening the product outlet. The air inside the bottles is discharged through an air tube, creating a vacuum in the bottle equivalent to the vacuum above the product level in the container. The product flows into the bottles by gravity until the fill level reaches the air tube. The bottle is then lowered and the product outlet is closed. Additional title: hot filling Capacity of filling line: 5000 bo/h Number of filling valves: 24 pcs Length: 1,64 m Width: 1,20 m Height: 2,10 m Hodpfxsw Tmmvo Aqrjp Formats: Round bottles, diameter 60 - 92 mm, height 100 - 265 mm Running direction: left -> right Features: 24 filling valves from stainless steel, height adjustment, vacuum blower

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: -washing machine Manufacturer: Kitzinger Year of manufacture: 2011 Output 1500 - 3000 bottles/h -bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 -swing top sealer Manufacturer: Rico -labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 -laser printer for dating Manufacturer: Domino -bottle collecting table Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Hedpfx Ajxbnyloqrep Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Features: Kitzinger bottle washing machine capacity 1500-3000 bottles/h; Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine Domino laser printer for dating; bottle collection table