Used Goodway for sale (12)

Year of construction: 2018, condition: ready for operation (used), Main Drive Spindle speed range 60–6000 Spindle motor power 11/15 kW Tool taper A2-5 Media Oil water separator Yes Chip conveyor Yes Additional Equipment Turret with Direct Mount (12 stations) High-Precision Linear Guides on All Axes Coolant System Hydraulic System Full Enclosure Automatic Lubrication System Signal Lamp (3-color) Work Area Lighting Automatic Machine Shutdown (via M-Code) Automatic Chuck Operation This Goodway GLS-150 was manufactured in 2018. A robust horizontal turning machine featuring a FANUC 01-T control system with a 10.4" LCD and Manual Guide functionality. It boasts a spindle speed of 60-6000 RPM and a maximum bar capacity of 51 mm. Equipped with a high-precision linear guide on all axes, a 12-station turret, and a reinforced coolant pump for enhanced performance. If you are looking to get high-quality turning capabilities consider the Goodway GLS-150 machine we have for sale. Contact us for more information. Application Types Gkodpsx D N D Refx Aftof Turning

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures Gkjdpfxjv Iplas Aftsf *

Condition: used, Year of construction: 2009, Goodway GS2600YS CNC Turning Centre with Fanuc Series 18i - TB CNC Control, Twin Spindle, 12 Position Tool Turret, Spindle Speeds 4000rpm, AR Filtrazioni Oil Mist Extractor, Machine Weight 6500kg. S/No. 94E046 (2009) Gkedpfx Asxztnbjftef Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2007, turning length: 600 mm, spindle bore: 33 mm, Distance between main spil and left turret 404 mm Distance between spil and sub spil nose minimum 260 mm Distance between spil and sub spil nose maximum 760 mm Max. turning Ø: 180mm X-Axis: 160mm Z-Axis: 210/600mm Spindle bore: 33mm Speedrange: 4000Rpm Gjdpfx Afsxtb Nwotekf Spindle power: 7.5kW Subspindle speeds:4000Rpm Subspindle bore: 7.5mm Length: 3100mm Width: 1700mm Height: 1800mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, functionality: fully functional, Description: The machine is in good technical condition, with the possibility of testing upon prior agreement. FANUC 18i-TB control system. Spindle speed: 42-4200 rpm. Main motor power: 11 kW. Turret with 12 positions (6 positions for driven tools). KITAGAWA hydraulic cylinder. Collet chuck. C-axis / Y-axis. Parts catcher. Chip conveyor. Grundfos cooling unit. Maximum spindle bore: 51 mm. Maximum machined diameter in chuck: 320 mm. Interface for bar feeder. Gkjdpfx Afexyix Hetef Machine and accessory dimensions (W x L x H): Machine: 1800 x 2350 x 2200 mm Coolant tank: 2150 x 1100 x 700 mm Chip conveyor: 2100 x 500 x 1400 mm Machine weight: 3500 kg

Condition: excellent (used), Year of construction: 2019, Goodway GTZ 2600 Turning-Milling Center Control: Fanuc 31i Godpfjxk Txrex Aftskf Main and counter spindle (chuck 210 mm x 2) 2 x turret, 2 x 12-position BMT 55 Y-axis Glass scales Spindle hours: 10,000 h.

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Model Oi-TB This Goodway GLS 150M was manufactured in 2014. A robust horizontal turning machine featuring a Fanuc Oi-TB control system, it offers a maximum turning length of 500 mm and a turning diameter of 500 mm. The machine includes a Renishaw tool probe and Hainbuch clamping for enhanced precision and versatility. Consider the opportunity to buy this Goodway GLS 150M horizontal turning machine. Contact us for more information about this machine. Application Types Turning Gkedpfxjx D Nbie Aftef

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 918106, turning diameter over cross slide: 500 mm, turning length: 560 mm, turning diameter: 420 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 600 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,260 mm, total length: 3,430 mm, total width: 1,810 mm, feed length X-axis: 230 mm, feed length Y-axis: 110 mm, feed length Z-axis: 600 mm, swing diameter over cross slide: 500 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning diameter over bed slide: 650 mm, workpiece weight (max.): 230 kg, turning diameter over top slide: 500 mm, type of input current: three-phase, torque: 287 Nm, overall weight: 5,800 kg, swing diameter over bed slide: 650 mm, bar passage: 65 mm, chuck outer diameter: 250 mm, center width: 560 mm, spindle nose: A2-8, bar diameter (max.): 65 mm, Equipment: rotational speed infinitely variable, 🔹 FOR SALE: 2006 Goodway GS-260MYS CNC Lathe – Very Good Condition – Ireland 🔹 Make: Goodway Model: GS-260MYS Year: 2006 Control: Fanuc Series 18i-TB Machine Type: CNC Turning Centre with Sub Spindle, Driven Tools, Y Axis & C Axis Condition: Very Good Location: Ireland Availability: Immediately available 📌 Description: For sale is a 2006 Goodway GS-260MYS CNC Lathe, a powerful multi-axis CNC turning centre equipped with live tooling, Y-axis milling, and a sub spindle. This robust machine is ideal for complex turning and milling operations in a single setup — perfect for modern precision engineering environments. Maintained in very good working condition, it includes a selection of manual and driven tool holders, 2 chucks, and a swarf conveyor. 🔧 Technical Specifications: Main Spindle: Chuck Size: 10" (250 mm) Bar Capacity: 65 mm Spindle Nose: A2-8 Max Swing: 650 mm Gkedpfxswtpdfo Aftef Swing Over Saddle: 500 mm Max Turning Diameter: 420 mm Standard Turning Diameter: 205 mm Max Turning Length: 560 mm Max Part Weight: 230 kg Hole Through Drawtube: 65.5 mm Hole Through Spindle: 76 mm Spindle Drive: Direct Belt Drive Spindle Speeds: 40 – 4,000 rpm Continuous Spindle Motor: 11 kW 30-Min Spindle Motor: 15 kW Spindle Torque (Cont.): 210 Nm Spindle Torque (30 Min): 287 Nm Axes: X Axis Travel: 230 mm Z Axis Travel: 600 mm Y Axis Travel: ±55 mm X/Z Rapid Traverse: 20 m/min Z2 Axis Travel (Sub Spindle): 600 mm Z2 Rapid Traverse: 24 m/min Tooling: Turret Stations: 12 OD Tool Shank Size: 25 mm ID Tool Shank Size: Up to 40 mm Live Tooling Stations: 12 Live Tool Drive Motor: 4.5 kW Live Tool Torque: 22 Nm Sub Spindle: Chuck Size: 6" Spindle Nose: A2-5 Hole Through Spindle: 46 mm Continuous Motor Output: 5.5 kW 30-Min Motor Output: 7.5 kW Spindle Speed Range: 60 – 6,000 rpm Drive: Built-in Motor Construction: Slideways: Hardened & Ground Box Ways Machine Dimensions: 3430 x 1810 x 2260 mm Machine Weight: 5,800 kg 🧰 Included with the Machine: Selection of Driven Tool Holders Selection of Manual Tool Holders 2x Chucks Swarf Conveyor Note: Tools shown in photos are not included – only the holders are provided. 🛠 Suitable For: Precision turning, mill-turn applications, production of complex components in aerospace, medical, automotive, and general engineering sectors. Used CNC Lathe Ireland, Goodway GS-260MYS for Sale, CNC Lathe with Y Axis and Sub Spindle, Live Tool CNC Turning Centre, CNC Turning Machine Europe, Fanuc CNC Lathe for Sale, Multi-Axis Lathe Machine Used

Condition: used, Year of construction: 2013, Goodway GS2600Y CNC Turning Centre with Fanuc Series 0i-TD CNC Control, 12 Position Tool Turret, Tailstock, 250mm Powered 3 Jaw Chuck, Spindle Speed 4000rpm, Filtermist FX4002 Oil Mist Extractor. Machine Weight 6700kg. S/No. 94E092 (2013) Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Gksdpfxsxztkve Aftef

Condition: good (used), Year of construction: 2004, In good technical condition and fully operational. Bar feeder SPACESAVER 2210 – year of manufacture 2014, and lathe – year of manufacture 2004. Spindle bore 40 mm. Without chip conveyor. Tool holders – 3 x double internal diameter 25 mm, 5 x single internal diameter 25 mm, 1 x plate holder, 2 x external front holders 20 x 20 mm and 8 x external holders 20 x 20 mm. Functionality is limited to two-axis turning with an accuracy of up to 0.01 mm. Tool measurement – Renishaw probe – replaced in 2023. Gsdpfxew N Nmws Aftskf

Condition: good (used), Year of construction: 2005, functionality: fully functional, Description: Gkodexyar Rspfx Aftsf The machine is in good technical condition. Testing is possible by prior arrangement and includes an LNS bar feeder. Max. turning length: 600 mm Max. turning diameter: 350 mm Max. diameter over bed: 580 mm Diameter over cross slide: 400 mm CNC type: Fanuc X-axis: 205 mm Z-axis: 630 mm Spindle bore: 76 mm Number of turret stations: 10 Adjustable speed: 4000 rpm Spindle motor power: 15 kW

Condition: excellent (used), Year of construction: 2012, Accessories available. Gedpfx Aev Awlksftokf Control: Fanuc