Used Harding Bridge Port for sale (7,635)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,173 h, functionality: limited functionality, machine/vehicle number: 822003, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 600 mm, feed length Y-axis: 410 mm, feed length Z-axis: 520 mm, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 426PB, total height: 2,535 mm, total length: 2,020 mm, total width: 2,000 mm, table width: 840 mm, table length: 420 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 6,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 22, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The milling machine is still running, while I'm writing this description, which proves it’s in good condition. We purchased the machine used, and it has had one defect from the beginning — when entering drilling cycles from the operator panel, the machine freezes and needs to be restarted. However, if a program containing drilling cycles is uploaded to the machine via the RS232 port, those cycles run correctly. Apart from that, all other components of the mill operate flawlessly. We’re also including a table-mounted rotary table (fourth axis) Magerl Rotamatik 120. The machine is for sale, because Heidenhain operators are hard to find in our area, and we want to buy something with HAAS controls instead. Rsdpfx Aoxrca Uoglsn

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 800 mm Y-AXIS TRAVEL: 510 mm Z-AXIS TRAVEL: 600 mm SPINDLE: 8000 rpm; BT 40 TABLE SIZE: 1000 x 490 mm MAX ADMITTED LOAD: 750 Kg TOOL MAGAZINE: BASKET-TYPE ; 20 POS CONTROL UNIT: HEIDENHAIN TNC 410 Redpfoxvfvmex Agljn WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3160 x 2160 x 2740 mm

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,050 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, 3-Axis Machining Center Manufacturer: Bridgeport Model: VMC-1000 XP Year of manufacture: 10-2002 Control type: Heidenhain iTNC-530 Operating hours: n/a S/N: 82XXXX Technical Data: ----- - Travel X-Y-Z: 1,050 x 610 x 600 mm - Spindle: max. 8,000 rpm - Tool holder: SK40 - Tool magazine: 22 positions - Coolant system - Through-spindle coolant (IKZ) - Glass scales on all axes X-Y-Z - Central lubrication - Weight: approx. 4.2 t - Dimensions LxWxH: 3,000 x 2,350 x 2,400 mm Accessories: ----- - Manuals - Tool holder package Rodpfjw Nyfdox Aglon Special features: ----- - Through-spindle coolant (IKZ) deactivated due to defective flow tube in spindle - Spindle replaced in 2023, few hours of operation, precise concentricity

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,117 h, functionality: fully functional, machine/vehicle number: 723503, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 500 mm, table length: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Control: Fanuc 18i-MB Pallet size: 500 x 500 mm X-travel: 710 mm Y-travel: 610 mm Z-travel: 610 mm B-axis: 360° (steps of 0.001°) Max. pallet load: 500 kg Rodovn Rf Iopfx Aglsn Spindle Spindle mount: ISO 40 (large-area spindle) Spindle speed: max. 10,000 rpm Number of tool positions: 60 pieces MACHINE DETAILS Dimensions: 3,675 x 4,510 x 3,100 mm Weight: 13,000 kg Operating hours: 730 h Cutting time: 5117 h Part counter: 55,588 pieces

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding entails the obligation to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Table dimensions: 1,150 x 490 mm Number of tool slots in magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Rodpfexn Ikwox Aglsn Weight: 4,200 kg EQUIPMENT Technical documentation Spare parts (as shown in the photos) Note: Only a 7.5t truck can turn around on the premises. It is advisable to send a smaller truck for collection.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 822441, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN TNC 410 PA, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the item within the timeframe from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travels Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 600 mm Spindle speed range: 40–6,000 rpm Drive power: 13 kW Spindle taper: BT 40 Number of tool stations in the tool changer: 22 Rapid traverse X and Y axes: 40 m/min Rapid traverse Z axis: 30 m/min Worktable Rodpfxexnk S Do Aglsn Length: 1,150 mm Width: 490 mm MACHINE DETAILS Control: HEIDENHAIN TNC 410 PA Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,400 x 2,400 mm Weight: 4,800 kg EQUIPMENT 3D measuring probe Note: The machine vices mounted on the worktable as well as the tool holders (including tools) installed in the tool magazine and spindle are not included in the scope of sale or delivery. The oil mist extraction unit, which may be visible in the photos, is also not included in the scope of sale or delivery.

Condition: used, Milling machine with Heidenhain control Bridgeport Interact 1. Runs perfectly. Rodpexiwkcjfx Agljn

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. Rjdextxk Sepfx Aglen You can find further milling machines from well-known manufacturers on our website.

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces carriages: x/y 1 - 3200 / z 1 - 2000 mm/min rapid move: x/y 1 - 3,2, z 1 - 2 m/min Rodpedt Ttkjfx Aglen electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg

Condition: refurbished (used), Year of construction: 1996, Bridgeport Milling Machine 2HP Variable Speed Rebuilt Machine Table has been reground on 3 Sides Excellent Condition Chrome Bed ways Ball Screw Leadscrews X & Y Axis Table Size 48” X 9” Spindle Speeds 50-4200rpm Brand New X Axis Powered Traverse Brand New 3 Axis Digital Readout ( X & Y & Quill Axis ) Brand New Coolant Pump Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray 3 Phase 400v Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new bearings , belts & Super Precision Spindle Bearings Replaced Rodpfxegvqkuj Aglen Warranty Included

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 838 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (min.): 50 rpm, quill travel distance: 127 mm, table width: 299 mm, table length: 1,245 mm, overall weight: 1,000 kg, input voltage: 400 V, warranty duration: 6 months, Rebuilt Bridgeport Milling Machine 2HP Variable Speed Fully Rebuilt Head And Machine Table has been reground on 3 Sides Bed ways have been reground and re scrapped in Brand New Lead Screws imperial X & Y & Z New Lead screw bushes imperial X, Y & Z Table Size 42” X 9” 50-4200rpm Brand New X Axis Powered Traverse Brand New Y Axis Powered Traverse Brand New 2 Axis Digital Readout ( X & Y Axis ) Brand New Coolant Pump & System Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Power - 3 Phase 400v (original wiring & Motor Pre CE) Comes with a techno piu machine safety guard fitted as shown in the photo which is interlocked Rodpfx Agjw Id U Holjn Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new shafts, new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: good (used), Year of construction: 2000, Parts shown by hand on movie or pictures not come. Rsdpfew Tl Dtsx Agljn 30 tool places in tool changer. coolant thru spindle 18 bar,

Condition: good (used), Year of construction: 1998, Technical data shown on picture. Parts shown by hand not come. Rjdow Tlviopfx Aglsn HEIDENHAIN TNC 410, BT 40, 18 bar coolant thru spindle, 22 tool places in tool changer.

Year of construction: 2001, condition: excellent (used), Description Universal CNC Turning Lathe from Bridgeport apply for toolmaker , mold maker, education and Locksmith Turning diameter : 430mm Control : Fanuc 20 T Redpfx Ajfglx Reglsn Technical data Turning diameter 430mm Turning lenght 1000mm Control Fanuc 20 T Tailstock MK 4 Tools Multifix Speeds 1-4000U/min Power supply 380V - 7,5 KW Contact person: AWM GmbH Herr Mario Wurm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 080026B, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 272 kg, spindle speed (max.): 30,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel Paths X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Feed and Spindle Feed rates: 15 m/min Spindle speed: 30,000 rpm Spindle power: 9 kW Spindle taper: HSK 40 Work Table Table size: 600 × 500 mm T-slots: 4 at 110 mm Max. table load: 272 kg Tool Changer Tool changer: 16 positions Redpfswzx A Hex Aglsn Max. tool weight: 1 kg Max. tool length: 90 mm Max. tool diameter: 16 mm Control Control unit: Heidenhain iTNC 530 MACHINE DETAILS Electrical Data Voltage: 400 V Phases: 3 Ø Frequency: 50/60 Hz Full load current: 50 A Dimensions & Weight Dimensions: 220 × 215 × 280 cm Net weight: 3,200 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 12,000 rpm, A set of 3 Bridgeport XR 700 HMCHP machines is up for auction: 1. Machine Serial number: 460P367 Year of manufacture: 2007 2. Machine Serial number: 460P389 Year of manufacture: 2007 3. Machine Serial number: 460P394 Year of manufacture: 2007 TECHNICAL DETAILS Redpfxsxgn T No Aglon Travels X-axis: 710 mm Y-axis: 610 mm Z-axis: 610 mm Pallet size: 500 mm x 500 mm Maximum workpiece weight: 500 kg Number of pallets: 2 Spindle taper: BT-40 Spindle speed: 12,000 rpm Spindle motor power: 30 kW MACHINE DETAILS Control system: Fanuc Series 18iMB Dimensions & Weight Dimensions: 4,650 x 3,675 x 2,400 mm Weight: 13,000 kg Note: The machine requires transportation with oversize width.

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH Rjdpsqgcdtsfx Aglsn

Condition: used, Year of construction: 1997, CNC machining center Bridgeport Allgäu 1000 Rjdowtncaopfx Aglsn

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Rjdpov Uqb Nsfx Aglsn

Year of construction: 2004, condition: ready for operation (used), Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg. Rjdpfxjtufb Ij Aglsn

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 823679, Axis:XYZ (3-axis) Max. Travel:950x500x450 Tool:SK-40 Control:HEIDENHAIN ITNC 530 Dimensions: 2320x4140x2690mm Redpfettm T Esx Aglen

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Table Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 MACHINE DETAILS Electrical Data Redpfx Agsxf Ax Djlsn Total power requirement: 22 kW Weight and Dimensions Machine weight: approx. 6,4 t Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV

Condition: used, Year of construction: 2005, x-travel 600 mm y-travel 500 mm z-travel 600 mm control iTNC 530 Heidenhain table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min spindle drive 10 kW tool taper SK40 DIN 69871 Rodpfx Ajvxwq Eoglon tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, table width: 600 mm, table height: 560 mm, table length: 1,200 mm, table load: 900 kg, spindle speed (max.): 12,000 rpm, Machine with just revised spindle, never used after Connected to power and available for inspections and tests Lubrication through spindle Rjdpforb Amlox Agljn 30 Tools Heidenhain 530

Condition: used, Year of construction: 1998, travel distance X-axis: 460 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 3,880 m/min, rapid traverse Y-axis: 3,880 m/min, rapid traverse Z-axis: 3,880 m/min, feed length X-axis: 840 mm, nominal power (apparent): 8 kVA, controller manufacturer: HEIDENHAIN, workpiece weight (max.): 500 kg, overall weight: 2,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, Metalworking – Vertical Machining Center Rsdpfxev A I Ipj Aglon Used Bridgeport industrial machinery – VMC 460/16 from 1998. This vertical machining center is equipped with a control unit Heidenhain TNC 370 and has a working area of 840 x 360 mm, 6000 rpm spindle speed and motor power of 7.5 kW.Control unit Heidenhain TNC 370 X-Axis travel 460 mm Y-Axis travel 300 mm Z-Axis travel 450 mm Table length 840 mm Table width 360 mm Workpiece weight 500 kg Spindle speed 6000 rpm Motor power 7.5 kW Spindle taper BT 40 Tool magazine 16 positions Dimensions L 2800 x W 2100 x H 2500 mm Weight 2500 kg Availability Immediately