Used Hay for sale (576)

Condition: used, Universal milling machine, console milling machine SIMPLON type UN-S / Universa-Super Machine. No.: 17220 Year of construction 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm. 16 steps Feed X, Y, Z-axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Motor power main spindle 4 KW Connected load 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Right and left rotation of the milling spindle - Vertical milling head swivels +/- 90 - Boom can be moved manually 700 mm from the milling head Hjdpfx Ahoifu Aroajfh - Manually extendable lateral counter bearing holder with dovetail guide 450 mm - Mechanical tool clamping with M16 tightening screw - Coolant device in the machine base - Electrical control cabinet on the machine Space requirement L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Hodsw A Af Ispfx Ahaefh Weight 2900 kg Good condition

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite Hfodsty A Ehjpfx Ahajh - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: excellent (used), CATALOG NUMBER 7678 TECHNICAL DATA - Guide bar length: 1670 mm - Cutting length: 1500 mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head - Manual feed of the guide bar - Electric motor: 7.5 kW - Transport dimensions (L/W/H): 1650x900x2350 mm - Total weight: 240 kg ADVANTAGES – Austrian manufacturing – Suitable for cross-cutting packs or round timber – Unpainted – Mobile, on wheels – Used saw, very good condition Hedpfx Asy Tkf Dshasfh Net price: 25,900 PLN Net price: 6,160 EUR depending on an exchange rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: new, Year of construction: 2008, total length: 12,547 mm, conveyor belt width: 350 mm, Unused Mayfran CT-20 conveyor chain, 2" pitch (50.8mm), conveyor width 350mm. Left over from an installation, has been stored as surplus stock. Hjdpfozbiw Hex Ahaefh

Condition: used, Year of construction: 2020, operating hours: 5,000 h, * Liebherr R920 Compact LC tracked excavator Hodpfx Ahozbwn Heaefh * Year of manufacture: 2020 * 4,990 operating hours * 22,400 kg * 110 kW * OQ65 fully hydraulic quick coupler * Variable-geometry boom * Blade * Central lubrication system * Refueling pump * Air conditioning * 3 m undercarriage width * 75 cm track pads * 180° camera * Undercarriage in very good condition * Maintained according to service schedule

Condition: used, Year of construction: 2013, operating hours: 12,489 h, Caterpillar 308 E2 tracked excavator (rubber tracks) with a blade * Operating hours: approx. 12,489 h * VIN: CAT0308EATMX01275 Equipment: * Rubber tracks * Dozer blade * Quick coupler * Powertilt * 4 buckets included * Year of manufacture: 2013 Weight: * Operating weight: approx. 8,300 kg Net price* All information without guarantee. Hsdpfx Ahey I Ibfjaefh Tel.: call (Contact · Phone · Mobile · WhatsApp)

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Hjdpfx Aozb A Rgohaofh

Condition: used, Blade 150 mm Chain width 7-8 mm Hfsdpfx Ahjy Slh Deaeh engine 1,6 kW Festo type PP chain mortiser or chain cutter with pneumatic feed for milling out lock cases or other fittings.

Condition: used, Year of construction: 2017, operating hours: 13,900 h, * Cat 308 E2 excavator * Rubber tracks * Equipped with a Powertilt * Quick coupler * Dozer blade * Air conditioning * 3 buckets included * VIN: CAT0308ELFJX03115 Hfsdpfx Ahezbwzgjajh * Hours: 13,900 h * Year of manufacture: 2017 * Windshield cracked * Price (net) * All information without guarantee Tel.: call (Contact · Phone · Mobile · WhatsApp)

Condition: used, functionality: fully functional, Fezer panel lifter with electric chain hoist PS 5 with rails, 250 kg load capacity, ideal for loading panel saws. Transport available at extra cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers. Hfodsw E Irfspfx Ahaoh

Condition: used, operating hours: 12,870 h, Due to the large number of non-serious emails / Emails will not be answered WhatsApp German machine Fully functional Ready to drive Width = 4m / Cabin height 3.75m Hfsdpewt Ip Tefx Ahaoh "SUBJECT TO ERRORS, TYPOS AND PRIOR SALE"

Condition: new, A mass production washing machine where parts are transported by hanger conveyor and washed by passing through tunnels. Washing is done by spraying or immersion ultrasonic dipping. Working Principle: Hodpfx Asd I E Itjhaefh Parts are transferred by hanging on to the hooks of the top loading conveyor belt. General process cycle: Washing - Rinsing - Optionally Ultrasonic Immersion Washing - Drying All of the HANGWASHes are tailor-made and have lots of options depending on your needs. Please feel free ot contact with us for further information.

Condition: good (used), Year of construction: 1992, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.5 m -Electric chassis: Abus S11148 34/153 rpm -Beam width: max. 310 mm Dimensions: see photo and technical drawing Hfjdpey N Anpefx Ahaeh -Electrical accessories: Connection cable (see photos) -Transport dimensions: 450/780/H400 mm -Weight: 56 kg

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), operation weight: 32,264 kg, Year of construction: 2022, operating hours: 4,950 h, Equipment: UVV, Year of manufacture: 2022 Engine power: 284 hp (208.8 kW) Operating weight approx. 32,265 kg Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Swing speed 9 rpm Max. travel speed 5.2 km/h Rear and side camera LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Engine: Cummins QSL9-C280 engine Hfjdpfezaqliox Ahash Water-cooled, 6-cylinder, with common rail injection and Adblue Stage V Power 209 kW / 285 hp; 2100 rpm 1,472 Nm / 1400 rpm Displacement 8,900 ccm Sensor-controlled idle automatic Cyclone pre-filter Hydraulics: State-of-the-art, optimized, demand-flow-controlled hydraulic system (positive flow controlled) Hydraulic load sensing Max. oil flow 2x 280 l/min Max. oil flow AUX1 500 l/min 1st proportional auxiliary control circuit for grab/hammer on joystick 1 2nd proportional auxiliary control circuit on joystick 2 Safety check valves for stick and boom with overload indicator Quick coupler hydraulic circuit, double-acting Adjustable oil flow rate for attachments Adjustable oil pressure for attachments Convenient switching of hammer/shear hydraulics in the display Hydraulic pre-control of the joysticks 10x additional circuit flow rate settings via on-board computer with multi-function monitor Swing brake 2 travel speeds Upper and lower carriage: Boom 6,150 mm, stick 3,200 mm, max. reach 10,870 mm Heavy-duty undercarriage and equipment with wear strips Steel tracks 600 mm Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Rear and side camera Battery main switch Fueling pump with automatic overflow protection Tool compartment Driving alarm and rotating beacon LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Transport dimensions: (L x H x W) 10,667 x 3,225 x 2,990 mm Operator cabin: ROPS Engine emergency stop switch 12V socket Document compartment Radio, Bluetooth-enabled with hands-free function for smartphone with speakers Automatic climate control Heater Tilting front window Large 10" high-resolution touch display Joystick adjustment independent of seat adjustment Floor mat Cup holder Air-suspended seat with fabric cover and seat heating

Condition: ready for operation (used), Column chain cutter with various cutter sets Hfjdou Imzvepfx Ahajh

Year of construction: 1988, condition: used, machine/vehicle number: MBMA13+25, Technical data: 1x Demag KBK 100 column slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Height: approx. 3m UK boom: approx. 2.65m Projection: 3m Hook height: approx. 2.15m Weight completely approx. 350KG with 125KG Demag DK chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Hedpfx Ahsrhzh Ssajfh Shipping by courier or collection only by appointment

Condition: used, Year of construction: 2019, operating hours: 8,100 h, Internal vehicle number: G400192 German vehicle Available immediately at our yard in Kaufungen - Kassel More information at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) CATERPILLAR 320 tracked excavator Year of manufacture: 2019 8,100 hours 22.1 tons Financing example: Hfjdpfx Aozahhbehajh * Internal number: G400192 * Purchase price: €66,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,037.02 Residual value: €13,080.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as part payment. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, total width: 3,900 mm, total height: 1,800 mm, Colour: Grey Empty weight: 4.200 kg Dimensions (LxBxH): 190 x 390 x 180 cm - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 90-58-07 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - └ Spindle 2: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - └ Spindle 3: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - └ Spindle 4: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - Max. planing width [mm]: 240 - Max. planing height [mm]: 85 - Feed table length [mm]: 1440 - Feed motor [kW]: 5.5 - Diameter extraction nozzle [mm]: 150 - Transport dimensions: 1900mm x 3900mm x 1800mm (l x w x h) - Transport weight [kg]: 4200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hfedpfx Ahswnh U Ejash Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type GM 3 / 125.6-121 Serial no. D639506/020 Year of manufacture: 1988 Load capacity: 125 kg Hook travel: 3.2 meters Lifting speed: 6 m/min. Creeping speed: 1.5 m/min. Distance suspension to load hook: 380 mm Pendant cable length: approx. 2.2 meters 1 load strand = 125 kg Power supply: 400 Volt, 50 Hz - Suspension eye on crane top - Without trolley Hfedpfx Ahsy Ra Dkeash Weight: 33 kg Good condition

Condition: excellent (used), DEMAG Chain Hoist Model PK 5 Load Capacity 1000 kg Lifting Height 4 meters Lifting Speed 7.5 meters/min. Overall Length 700 mm 380 Volt 1.4 kW Year of Manufacture 1967 Condition is very good, only occasionally used. Can be tested on site. Transport Dimensions: Length 700 mm Width 400 mm Hfedpfoy I Ulkox Ahaoh Height 320 mm Weight 60 kg

Condition: used, Year of construction: 2014, operating hours: 9,199 h, CAT 314ELCR from year 2014 with only 9,199 operating hours: ----* Manufacturer: CAT * Model: 314ELCR * Year of manufacture: 2014 * Displayed operating hours: approx. 9,199 * Incl. 1 x digging bucket approx. 65 cm * Incl. hydraulic quick coupler Verachtert * Dozer blade * Mono boom * Hammer piping (auxiliary hydraulics) Hodpfxjy Uqd Ne Ahaofh * Air conditioning - A/C * Transport width: approx. 2.50 meters * Further photos and video available on request * Price: 39,900 Euro, net + 19% VAT ----For further questions please call: For more questions please call: Erik Kortum: WhatsApp All information without guarantee or warranty. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2008, clamping force: 5,300 kN, screw diameter: 80 mm, Hydraulic injection moulding machine manufactured in 2008. This HAITIAN MARS 5300/4500 features a clamping force of 530 tons and a minimum mold height of 240 mm. It includes a screw diameter of 80 mm and a shot volume of 2212 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MARS 5300/4500 machine we have for sale. Contact us for further details regarding this machine. • Tie bar spacing (W×H): 840 × 830 mm • Magnetic clamping: Yes • Minimum platen size (W×H): 580 × 530 mm • Minimum mold height: 240 mm Hjdpfx Ahoy Nx Sdjaofh • Maximum distance between platens: 740 mm • Maximum weight of moving mold half: 1700 kg • Centering ring diameter/height: 200 (120) / 15 mm • Sprue bushing radius: R19 • Ejector coupling thread diameter: M24 • Shot volume: 2212 cm³ • Hydraulic core pulls: 2 • Power supply: 196 A Additional equipment • Hot runners: 16 • Hydraulic cascades (valve gate control): 8

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Hfodon D N H Tjpfx Ahash Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Condition: used, overall weight: 69,000 kg, Year of construction: 2007, operating hours: 9,379 h, Engine: Isuzu, 6 cylinders, 345 kW – AH-6WG1X – EPA and CE compliant Boom: 6.58 m Stick: 3 m Ground plates: 650 mm Hfsdpjul U H Tsfx Ahaeh All hydraulic lines (hammer/grapple and rotation) Hydraulic quick coupler: OIL Quick OQ90 or Lehnhoff HS80 Deep digging bucket – 4.55 m³ SAE Transport weight: 69 tons Transport width: 3.93 m Working width (4.14 m with outriggers) Transport height: 4.37 m The machine has been overhauled and repaired in our workshop. Report available upon request. Major inspection performed: All oils and filters replaced, including 650 liters of hydraulic oil. CASE Germany, March 2026: The engine has 6 new fuel injectors (invoice available upon request).