Used Heidelberg Ksba for sale (281)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 000163, color channels: CMYK, paper weight (min.): 45 g/m², paper weight (max.): 80 g/m², total length: 16,000 mm, total width: 3,500 mm, total height: 4,500 mm, space requirement length: 20,000 mm, space requirement width: 6,000 mm, space requirement height: 6,000 mm, year of last overhaul: 2020, type of input current: three-phase, input voltage: 380 V, cutting length (max.): 630 mm, section length (max.): 1,000 mm, Equipment: documentation/manual, kitap,jurnal,gazet çap enjam.Sagatda nominal25000 şertli önüm.(maksimal 35000 çenli)tizlik.wertikal gurnama çap guraly 4+4CMYK. Jf35 epleýjili,63sm kesiji,üç görnüş epleýiş,doly işjeñ ýagdaýda.Rulon oturtma iki rulonly.4+4 CMYK Dcodpoz A Uz Aefx Acpon

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or Dcodez H Smwjpfx Acpen ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets • Preset function for W4 feeder • Automatic format adjustment of the suction head • Automatic stack side limitation in the feeder System • Dyset Pro bar system • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: used, Year of construction: 2007, Heidelberg, station BUH 66-4, year of manufacture 2007. Dsdpfsz I Tzlex Acpocn Optional: window frame pocket + sensor, light barrier, and ACC 2.4 control unit.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Heidelberg Stahlfolder TD-112 Year: 2009 Mach. no. 1224427271 PD 112 Topline pallet feeder Performance package PD 112 (double valve suction wheel, more powerful compressor, additional hold-down device) 1st station 4 folding pockets 2nd station 112cm 4 folding pockets Twin system in the 2nd station for double-flow production including transfer table, short feed ruler, 2x split sheet stop pocket, 1x split separate switch, second light sensor each at the folding unit output 1st and 2nd station, additional transport and drive rollers 3rd station 78 cm 4 folding pockets SBP 86 Delivery Automatic sizes Soundhoods Compressor Dodpewpgpdofx Acpscn Machine is in very good condition!!!

Condition: excellent (used), Year of construction: 2002, We are offering this very well-maintained Heidelberg Quickmaster DI 46-4 offset printing press, manufactured in 2002. Included are printing inks, printing plate rollers, and additives. Sale due to company closure. The machine is still in production and can be inspected at any time. A video can be provided upon request. Manufacturer: Heidelberg Model: Quickmaster DI 46-4 Year of manufacture: 2002 Djdpfx Acoz H Undspocn If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: pm740725, color channels: 4, counter reading (color): 357,788,902, Equipment: documentation/manual, machine is in a good condition. we are shortage of space and so we took some photos and videos before we moved machine to storage. in case of real interest we can reinstall machine for customer for test. if interested i can send video of machine also. Dcsdpfx Aoz A U Dqecpsn

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, A NELA plate bending machine (printing plate bending device) is a professional bending device for offset printing plates, manufactured by the German company NELA Brüder Neumeister GmbH. These systems precisely shape printing plates into the required form, ensuring a perfect fit into the cylinders of offset printing presses. Dcsdpfxjz It Sks Acpsn Compatibility: NELA manufactures bending devices specifically tailored to the requirements of major printing press manufacturers. Models like the HD/Nela SM 102 B, which are optimized for Heidelberg Speedmaster (SM 52, SM 74, SM 102) as well as XL machines, are particularly common. A Heidelberg NELA plate punch (also called a printing plate punch, plate perforator, or hole punch) is an essential precision tool in prepress. It is used to punch register holes or cutouts precisely into offset printing plates. This ensures flawless clamping and perfect alignment (register) of the plates in Heidelberg printing presses. Compatibility: Specifically designed for Heidelberg machine series such as the Speedmaster (SM) 52, 74, and 102. Hole spacing: Flexible configurations with variable hole spacings, such as 425 mm and 780 mm (for Autoplate systems), are common.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21839, type of input current: AC, punching force: 60 t, overall weight: 5,000 kg, machine base height: 1,560 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 25 A, control cabinet width: 770 mm, control cabinet length: 570 mm, control cabinet height: 380 mm, Equipment: CE marking, Heidelberg SBGZ – Very Good Condition Dcedpfx Acoz Hn N Ijpjn Heidelberg SBGZ cylinder printing machine, in very good condition and available for sale. The machine has been well maintained and carefully operated, It is in very good working condition and suitable for continued professional production. Machine Highlights Manufacturer: Heidelberg Model: SBGZ Machine type: Cylinder / Letterpress Format: approx. 560 × 770 mm Good condition Well maintained Carefully operated Limited operating hours Ready for continued professional use Inspection possible by appointment The Heidelberg SBGZ is a robust and proven cylinder machine suitable for a range of printing and finishing applications. Further technical specifications, photographs and additional information are available upon request.

Condition: ready for operation (used), functionality: fully functional, total width: 1,030 mm, total length: 3,540 mm, total height: 1,560 mm, input voltage: 400 V, overall weight: 5,000 kg, type of input current: AC, input frequency: 50 Hz, input current: 25 A, temperature: 220 °C, Equipment: CE marking, Heidelberg SBG hot-foil stamping machine, suitable for high-quality decorative finishing of paper and board. The machine is in good condition, well maintained and has been carefully operated. It is suitable for hot-foil stamping. Dsdpfxez Hptns Acpjcn Machine Highlights Manufacturer: Heidelberg Model: SBG Machine type: Hot-foil stamping and embossing machine Maximum sheet size: approx. 560 × 770 mm Maximum stamping area: approx. 540 × 750 mm Hot-foil stamping Embossing Suitable for paper and board Good condition Well maintained Carefully operated Ready for continued professional use Inspection possible by appointment The Heidelberg SBG is a proven and robust machine for professional hot-foil stamping and finishing applications. Further technical specifications, photographs and additional information are available upon request

Condition: used, Year of construction: 2018, operating hours: 69,000,000 h, functionality: fully functional, Folder gluer machine Folding carton with longitudinal seam: max. 1,150 × 600 mm min. 75 × 55 mm min. 45 × 55 mm (with small carton device) Crash-lock bottom carton: max. 1,150 × 600 mm min. 146 × 80 mm 4-corner box (erected): max. 1,150 × 680 mm min. 120 × 110 mm Dedpoyg Edgjfx Acpecn 6-corner box (erected): max. 1,150 × 630 mm min. 250 × 130 mm With BELKHOFF control system Roller and drying tunnel TÜNKERS EAS 480 delivery station, right-hand, year of manufacture 2019

Condition: good (used), Year of construction: 2007, operating hours: 130 h, machine/vehicle number: 208159, Size 36 x 52 cm, CP 2000, Alcolor dampening system, Baldwin cooling and recirculation unit, Autoplate, blanket washing system, roller washing system, impression cylinder washing system, Alphatronic powder spray. Dcodpfoz Hm D Djx Acpen

Condition: used, Year of construction: 2009, Format: 660 x 1040 mm Equipment: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Dcjdpfsy Tacrox Acpon Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, CP 2000: Touch Screen Console Automatic Blanket Washing Device Impression Cylinder Washing Device Grafix Alphatronic 200: Powder Sprayer Dcjdpfx Ajz Er Ncjcpon Heidelberg Autoplate (Automatic Plate Changing System) Alcolor Dampening Technotrans Cooling Device Low-Pile-Delivery Impression Account: 138 Mio.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Performance Package Speed: 18.000 s/h max. Watercooled Press PrinectPress Center XL 2 Control Station Wallscreen XL Touchscreen AutoPlate Pro: Fully Automatic Staggered Plate Change Prinect Inpress Control 2: Spectrophotometrically Inline Measurement System Perfetor Full Automatic (4-4/8-0) AirStar Pro: Central Air Supply Cabinet (Watercooled) Acoustic Package Sinus-Synchron Drive Dcjdpfx Acjzxui Ijpjn Scrollstar - Air Compressor Extended Delivery (X1) Energy saving system with automatic switching on/off of all drives Sheetfed Control Program-controlled Automatic Blanket Washup Devices for Blanket and Impression Cylinders Program-controlled Fully Automatic Inking unit Washup Device Powderstar AP 500 Duo CAN: Powdering System Feeder Touchdisplay CleanStar: Effectively Powder Emissions at delivery Non-stop Feeder Preset Plus Delivery Preset Plus Feeder: Fully Automatic Configuration of the Feeder Preset Air Transfer System Non-stop Delivery CombiStar Pro CAN (watercooled) Ink Temperature Control Hycolor Dampening System AirTransfer System (For Sheet Transfer) Dynamic Sheet Brake XL Sheet Feeder System InkStar CAN Staticstar Compact: Antistatic Device on Feeder & Delivery Electromechanical Stream Controls Pull Lay Control - Double Sheet Control Perfect Jackets Impression 225 mio.

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Manufacturer’s description: Dedpfx Aez Icznscpocn Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system.

Condition: used, Year of construction: 1999, color channels: 2, Heidelberg SM 74-2 P. - Year 1999; - 57 million impressions; - Alcohol dampening, with Baldvin system; - Ink roller washing system; - Blanket and cylinder washing system; - Air knife; - Powder spraying system; - Perfector (2+0; 1+1); Dcjdpfxjzlgpye Acpen - No damage to cylinders.

Condition: used, Year of construction: 2015, functionality: fully functional, Heidelberg SBD | 64x90cm Dodpsyzgl Aefx Acpocn ・Fully Refurbished 2015 ・Very Good Used CMI Cylinder ・2 Foil Rewind ・4 Zone Heated Aluminium Drop-In Plate ・Automatic Impression ・Touchpad Operation System ・Excellent Used Machine *Very clean, well maintained and serviced* LOCATED IN THE UK | AVAILABLE IMMEDIATELY

Condition: used, Year of construction: 1989, functionality: fully functional, MONTHLY OFFER: This machine needs to be sold!!! Heidelberg GTO 52-1 Colors: 1 Year: 1989 Dampening system: Kompac Maximum format: 520x360 mm (20x14 inches) Current status: In stock Impressions: 39 million Availability: Immediate Location: Italy Dodezzd Swspfx Acpscn SPECIAL PRICE (for quick confirmation): €3,000 (Loaded)

Condition: excellent (used), Year of construction: 2014, Heidelberg XL75-4+LX Anicolor, ref. 3023 Year 2014 IR + hot air drying Extended delivery length: 160 cm 185 million impressions Maximum sheet size: 607 x 750 mm Djdozrp Thepfx Acpjcn Non-Stop feeder Non-Stop delivery In very good condition!!!!

Condition: like new (used), Year of construction: 2017, operating hours: 57 h, functionality: fully functional, machine/vehicle number: LS001402, FULL UV Size 53 x 75 cm, Anicolor, Wallscreen K Press Center XL 2, Alcolor VARIO dampening system, Combistar cooling and recirculation unit, Inking unit temperature control, Water-cooled machine, Autoplate PRO, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x UV interdeck dryer, 1 x UV end dryer, Powder spray, Extended delivery X2 module, Sheet brake, FOIL Print kit, Airstar Pro, Cleanstar Steel plate in feeder and delivery Dcodpfxjx An Uro Acpen

Condition: used, Year of construction: 2004, functionality: fully functional, HEIDELBERG ST100.2 STITCHING MACHINE Year 2004, second-hand, in excellent condition, cleaned and checked composed by 6 sheet feeders + cover feeder stitching station with 2 heads trilateral (trimmer) controls for signature pick-up and spine length Dsdpjzr Halsfx Acpocn OPTIONAL: double centre-cut

Condition: used, Year of construction: 2000, Format: 370 x 520 mm Equipment: Alcolor Automatic film dampening Dcsdpfxezzzt Sj Acpen Autoplate: semi-automatic plate change system All manuals, tools, accessories Technical details: Maximum sheet size: 370 x 520 m Paper thickness range: 0,03 - 0,5 mm - Max. speed Plusversion

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Dcodpez E A I Aofx Acpsn Power supply: 400V Year of production: 1994 Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: good (used), functionality: fully functional, Heidelberg GTC Die-Cutting Press – 60 tons of die-cutting pressure Industrial classic | extremely robust | comprehensive accessory package For sale is an original Heidelberg GTC die-cutting press, one of the most powerful and robust die-cutting machines from Heidelberg. The year of manufacture and operating hours are not documented (typical for this machine generation), but the condition is functional, complete, and exceptionally well-equipped. Special feature: 60 tons of die-cutting pressure The GTC clearly distinguishes itself from other Heidelberg die-cutting presses (e.g., GT / T / smaller models): ➡ 60 tons of die-cutting pressure instead of the usual approximately 40 tons. This makes the machine ideally suited for: • Thick cardboard • Multi-layer materials • Demanding die-cutting and scoring jobs • Tools with high surface pressure _____ Equipment & Scope of delivery • 3 die-cutting frames, including o 1 frame with a 340 mm milled recess (ideal for special tools / larger formats) • 2 die plates in different thicknesses • Comprehensive accessory and spare parts package (see pictures) • Spare parts list available – a significant advantage for operation and value retention • Original Heidelberg mechanics (robust, durable, easy to maintain) _____ Dcedpeyc Hnfsfx Acpjn Typical areas of application • Die-cutting and scoring • Format die-cutting • Small and medium-sized series • Packaging, cardboard, technical die-cut parts • Ideal for workshops, processors, and specialized companies Conclusion The Heidelberg GTC is not a museum piece, but a real production tool. With 60 tons of die-cutting pressure, several die-cutting frames, die plates, plenty of accessories, and a documented spare parts list, this machine offers an exceptional overall package for professional users.

Condition: used, Year of construction: 1971, The Heidelberg GTP is a high-performance hot foil stamping press, currently operational in a printshop in Germany. Designed for precision and versatility, this machine handles a wide range of applications, from luxury packaging to security printing. With a maximum sheet size of 340 x 460 mm and a minimum of 85 x 102 mm, the GTP accommodates diverse project requirements. It operates at speeds between 1,500 and 4,000 sheets per hour, delivering both efficiency and flexibility. The press features a punching pressure of 60 tons, ensuring crisp, high-quality foil application on various substrates. Weighing approximately 2,250 kg and with compact dimensions of 2.08 x 1.48 x 2.10 meters, the GTP is built for stability and ease of integration into existing workflows. The machine comes complete with all necessary tools, accessories, and a sturdy frame, making it a turnkey solution for any finishing department. Format: 340 x 460 mm Equipment: Hot Foil Stamping Tiegel Heidelberg GTP Size min. 85 x 102mm Size max. 340 x 460mm Speed min. min. 1.500sph - max. 4.000sph Punching pressure 60T Weight approx. 2250kg Dcsdpfjzwf Ufex Acpen Dimensions 2,08 x 1,48 x 2,10m Complete with tools and accessories include frame