English
German German German English English French French Spanish Spanish Italian Polish Russian Belarusian Dutch Ukrainian Estonian Turkish English English English Czech Danish Finnish Swedish Norwegian Bokmål Maltese Luxembourgish Greek Lithuanian Latvian Kazakh Icelandic Portuguese Portuguese Spanish Spanish Hungarian Slovak Romanian Romanian Slovenian Serbian Serbian Albanian Croatian Bulgarian Macedonian Bosnian Hebrew Arabic Hindi English Indonesian Korean Japanese Thai Malay Vietnamese Chinese Chinese Persian Bengali Pashto Urdu

Holzkraft rla 160 for sale

Identified location: Ashburn (US) (Edit)
dust-tested, mobile collection container ----- Specifications ----- Suction nozzles: 160 mm, Y7iwkttg Rated volume flow: 1,770 m3/h, max. vacuum: 1,700 Pa, Number of sacks: 2 pieces, Engine: 2.2 kW more
Clean air extraction system - NEW - Factory wood power Type RLA 160 Description: - For wood shavings. Designed for commercial use. - All clean air extraction systems of this series are dust-tested To H3, residual dust content less than 0.1 mg / m³ - High suction capacity with low space requirement - Maximum performance in this class - Very quiet - All models with a start-up protection Application: - Clean air extraction systems for wood chips - Designed for commercial use - For all woodwo... more
For wood shavings and wood dust. Designed for commercial use. All clean air extractors of this series vacuum residual dust content tested according to H3, smaller than 0.1 mg / m ³ High suction performance with small footprint Maximum performance in this class Very quiet Usage area Clean air extraction systems for wood shavings and wood dust Designed for commercial use For all woodworking machines with appropriate dust nozzle diameter Can also be used for multiple dust sources High-qua... more
Engine power: 1.8 hp/HP (1.5 kW), built in 2017, Motor voltage: 3x 400 V, type: RLA 1213, motor frequency: 50 Hz, suction connection diameter: 100 mm, weight (kg): 116 kg, chip bag capacity (ltr): 135 liters, maximum vacuum (Pa): 2124 Pa, suction capacity (m3/h): 790 m3/h, Rated volume flow: 565 m3/h, filter area: 4.1 m2, M filter material, residual dust content: .1 mg/m3, sound pressure level: 75 dB(A), manual filter cleaning Bdtfrvxev0 more
Wood power RLA 200 Y.O.M. 2004 Engine power 2.9 kW Suction nozzle: 200 mm Rated volume flow: 2,780 m3/h min. volume flow: 2,262 m3/h pneumatic filter cleaning: hand/car Pressure connection: 6-8 bar 2 pcs. mobile chip collection container (255l + 500l container) Xyjroupe Dimensions: 2.40m x 0.85m x 1.86m (LxWxH) more
Bench vise, bench vise, parallel vise jaw width: 160 mm -Wingspan: 195 mm - 1 x vices available 9qygfy8wl Award pieces -Dimensions: 560/180/H210 mm -Weight: 26 kg more
1
Bitburg, Germany Germany
dealership location
6422 km
2019
as good as new (ex-display)
For wood shavings and wood dust. Designed for commercial use. All clean air extractors of this series vacuum residual dust content tested according to H3, smaller than 0.1 mg / m ³ Wq7jtnalx High suction performance with small footprint Maximum performance in this class Very quiet Usage area Clean air extraction systems for wood shavings and wood dust Designed for commercial use For all woodworking machines with appropriate dust nozzle diameter Can also be used for multiple dust source... more
8
Ziegelhofstraße 35, 79110 Freiburg im Breisgau, Deutschland Germany
6596 km
2016
good condition (used)
Technology and equipment: Filter surface: 8.5 m2 Filter class: dust class M Filter type: Bypass filter Motor: 2,2 kW Absaugstutzen-diameter: 140 mm Cleaning: manual / mechanical Sound power level: silencer-71dB EasySwitch receiver expansion module Tested according to H3: residual dust content ᐸ 0.1 mg / m ³ Nominal flow rate: 1,108 m ³/h Maximum flow rate: 1,750 m ³/h Depression at Vnom: 2.615 PA Kaevdohh Dimensions: 1200 x 900 x 1750 mm Weight: 220 kg more
5
Mellrichstadt, Germany Germany
603 km
2011
excellent (used)
Fully equipped with counter spindle 2jupuito more
Nail series: 34° paper magazineed strip nails Wire diameter: 3.8 - 4.6 mm Nail lengths: 100 - 160 mm Bfeqbk8j0l Working pressure: 5 - 8 bar Weight: 7.10 kg Magazine capacity: 72 nails more

New machines via email!

Yes, send news from this list to my inbox!
Stay updated!
You can create a label.
How often do you want to be notified about new listings?
6
Leicestershire, United Kingdom United Kingdom
dealership location
5824 km
2001
ready for operation (used)
Serial No. 122156 Blade size 450mm Capacity 160mm dia, 145mm x 145mm or 320 x 50mm Saw head swivels 90 - 0 - 90 degrees Input 415/3/50 3.7kW Nombv Feed rate 0 - 3000mm/min Fitted with 3000mm infeed roller tracking with measuring length stop and 3000mm outfeed roller tracking Length 4'2" / 1270mm Width 4' / 1219mm Height 6'8" / 2032mm Nett weight approx. 1,100 Kgs / 1.08 tons more
2
Barneveld, Netherlands Netherlands
dealership location
6266 km
used
Make Drais, Type HT-160, No 51.002, New 1982, Material Stainless steel, Paddle dryer (1x), Capacity 160 Ltr, Trough sizes dia. 600x670mm, Inlet dia. 250mm, Outlet dia. 105mm, With jacket , Working pressure unknown, Max. temperature unknown, Motor 22,0 KW, 400/690 Volt (Ex) - BRAND NEW MOTOR, With lump breaker (1x). Lump breaker speed 1450/2925 Rpm, Motor 14,0/17,0 KW, 380 Volt (Ex), Extra Specifications - With various spare mixing shafts -- RECONDITIONED -- What you can expect from Foeth: all ou... more
Electric ant or forklift truck Manufacturer: Wagner Type : Tec1600 Built: 1991 weight with battery 1100 kg Battery voltage 24 V Bfl3qe3flz Charger more
Vehicle - Make: Manitou - Type: 160 ATJ PA - Drive type: Diesel - Load capacity: 230kg - Load centre: - Lifting height: 0 mm - Reach: 9100 mm - Built: 2008 - Engine hours: 2631 - Internal No.: XB060919 _____ Mast data - Mast type: Bfjmd7hxsc - Lifting height: 0 mm - Height: 1800 mm - Free stroke: 0 mm - Fork carrier: 0 mm - Forks: 0 x 0 x 0 mm _____ Dimensions - Length:... more
5-Axis Machining Centre with Pallet Pool. DMG DMC 160U duoBLOCK. Year of manufacture 2006. Siemens 840D Powerline CNC. 6 x Pallets 1000 x 1250 mm. NC-Rotary Table 4th Axis C-Axis 360° / 0.001°. NC-Swivelling Milling Head 5th Axis A-Axis 130°/-30°. X 1600 mm. Y 1250 mm. Z 1000 mm. Rapids X,Y,Z 60000 mm/min. Spindle drive motor rating 68/85 KW. Spindle speeds to max. 30000 rpm. Tool taper HSK-A63. Tool magazine positions 120 High Pressure Coolant through the spindle 40 bar. Bfl0l3... more
4
Mönchengladbach, Germany Germany
dealership location
6363 km
used
turning diameter over bed:1600 mm turning diameter over slide rest:1200 mm turning length:2000 mm turning diameter in the gap:2300 mm max. workpiece weight between centres:8000 kg main drive:37 kW bed width:1400 mm spindle passage:100 mm spindle turning speed range:2 - 140 U/min faceplate diameter:1600 mm Bdbadzibk2 weight of the machine ca.:17 t total power requirement:45 kW dimensions of the machine ca.:6,5 x 3,5 x 2,8 m heavy duty lathe with separate headstock - new thyrsistor controled mai... more
1
Hochheim am Main, Germany Germany
dealership location
6537 km
used
Second-hand machine Year of construction: 1994 Condition: Funktionsgeprüft; Have been newly replaced filter Technical data: Bekxxtimio Vacuum tested for commercial use Dust nozzle: 160 mm Motor: 2,2 kW Filter area: 11.5 m2 Vnom: 1780 m³ / h Vmin.: 1450 m³ / h Availability: Immediately Location: Hochheim more
Make Drais, Type HT-160 A, No 50561, New 1981, Material Stainless steel 1.4571 (316Ti), Turbulent dryer (1x), Capacity 160 Ltr, Trough sizes dia. 505x900mm, Inlet dia. 300mm, Outlet dia. 125mm, Working pressure vac/6 bar, Test pressure 7,8 bar, With jacket (18 Ltr), Trough sides jacketed (2,7+1,5 Ltr), Working pressure 6 bar, Test pressure 9,1 bar, Max. temperature 200 Degr. C., With mechanical seal , Motor 12,0 KW, 380 Volt (Ex), Floorspace 4,6x1,3 M (in open position), Total height 2,2 M (with... more
Technical data - Travel ranges: X 1,600 mm, Y 1,300 mm, Z 700 mm - Drive power: 18.5 kW - Speed: 12,000 rpm. - Spindle mounting: ISO 40 - Rapid traverse: 30 m/min. - Feed rate: 20,000 mm/min. - Clamping surface: 1,600 x 1,200 mm - Table load: 8,000 kg control - Heidenhain iTNC 530 - electronic hand control HR 410 - TFT screen / keyboard MB 420 / machine control BF 150 - Ethernet i... more
9
Hardinxveld-Giessendam, Netherlands Netherlands
6234 km
1991
good (used)
PRIMULTINI log bandsaw line type 1600 SIB-CFG-IFB Manufacture year 1991 Iqmyxxugu 01 Heavy duty cross chain transport for logs 02 Loading deck with separations arms 03 PRIMULTINI hydraulic log carriage, type CFG - 4 hydraulic headblocks - Opening headblocks horizontal 1000 mm - Horizontal movement headblocks by hydraulic motor - Distance between headblocks 2000 – 1400 – 2300 mm - Total length carriage ca. 7500 mm - headblocks with moveable hooks by hydraulic cylinder - 4 heavy... more
Tesa 32.10802 Probe incl. extension cable, used, low traces of use, 100% functional, supplied with photos C2baa3vo more
Control Tosnuc 888 Pallet size 2 x 800mm x 800mm, loading capacity 2000 kgs Pallet table indexing 0.001 cont X Axis Travel 1600mm Y Axis Travel 1250mm Z Axis Travel 1200mm B Axis 1 degree Speeds 10,000 rpm Spindle taper BT 50 Automatic tool changer 60 ATC Tool length 550mm Tool diameter All pots full 125mm, Empty both sides 250mm Cp8lj9qy Tool weight 25kg Input 30 kW main motor Equipment Swarf conveyor, Coolant Nett weight approx. 24,000 Kgs. / 23.6 Tons. more
4
Eislingen, Germany Germany
dealership location
6689 km
1992
used
material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening r... more
Make Thaletec ( D ), Type BE 2500-1600 AM-D80, Lining material Glass - Enamel, Reactor , Extra Specifications 3.550 Liter total volume, glass-lined steel, with anchor agitator, Agitator Type TRD 300/7,5 kW-ST with 62 rpm, internal P= -1/6 bar, -60/1oo·c, jacket -60/200°C, Fabrik # 631444, new in 2011, with CE 045, and ATEX Zone 1 inside and outside, II2GDcT4, Interseal Lip seal on shaft type ARF-DO-E-LO/80 DVSLA, HEW motor 7,5 kW, SEW drive , with 4 legs What you can expect from Foeth: all our... more
SCHWERLAST - PLATTFORMWAGEN 6T - 27-01-198 Lieferzeit: sofort Nummer: 27-01-198 Hersteller: Schwerlastplattformwagen Ncd28eo9 Typ: 6 T Bfluduiylu MASCHINENDATEN Baujahr: ca. 1994 L x B x H: ca. 4000 x 2000 x 500 mm Gewicht: ca. 2000 kg Guter Allgemeinzustand TECHNISCHE DATEN - SCHWERLASTPLATTFORMWAGEN geeignet u.a. zum: transportieren von Maschinen Max. Traglast: ca. 6000 kg Länge (Plattform): ca. 4000 mm Breite (Plattform): ca. 2000 mm Höhe (Plattform): ca. 5... more
7
Kaiserslautern, Germany Germany
dealership location
6526 km
2007
ready for operation (used)
Movement X-Axis Movement 2550 mm Y-Axis Movement 16100 mm Workpiece Workpiece X 2550 mm Workpiece Y 16100 mm Max Material Thickness Steel 40 mm Stainless steel 30 mm Aluminium 30 mm Bevuv79wlk This CRM CT16025ISO40HPR Plasma Cutting Machine was manufactured in 2007 in Italy and has a working record of approximately 25000 production hours. The machine stands out due to its large Y-axis movement range of 16100 mm and the maximum sheet thickness. Application Types Plasma Cutting more
5
Strassberg, Germany Germany
dealership location
6676 km
1979
used
Pressure: 160 ton Ram stroke adjustable: 20 - 180 mm Ram adjustment: 80 mm Shut height (stroke down, adjustment up): 450 mm Free lateral opening F-B: 520 mm Table surface area : 1.420 x 900 mm Ram surface area: 1.110 x 720 mm Hole in table: 1.100 x 200 mm Gf9vel0y8 Number of strokes: 25 - 100 [...] Required power: 28 kW Height over floor approx.: 3.800 mm Weight of machine approx.: 28 ton more
3
Zuzenhausen, Germany Germany
dealership location
6602 km
ready for operation (used)
Flow rate at 50 Hz: 2740 cbm / h Drive: 2,2 kW The built-in radial fan sucks up dust and chips from the origin point and pushes it over the paddle-wheel in the frame of the injection. The chips accumulate in the dust or shavings bag. The dust-and air mixture flows into the filter bag, where the dust is filtered out. The cleaned air is returned to immediately operate. The double-walled filter bag offers a much larger filtration area compared to other constructions. The cleaning of the filter ... more
Double upright eccentric stamping BLEMA Gotha type PEZ 160-50 MHSY-ES Masch. No. 88151005 built in 1988 / 92 Pressure 160 ton. Stand width 970 mm Stand width side 560 mm Table size 900 x 900 mm Plunger area 900 x 700 mm Mould installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Plunger travel 125 mm Number 25 to 70 strokes/min. Bandwidth in the roll feed of Max 400 mm Motor output approx. 15 kW Power supply 380 v, 50 Hz Encrr7r -stepless speed adjusting of frequency ... more
Make Buehler GmbH , Type CALYPSO SKV-1600, No 20 352 717, New 1993, Material Mild steel, Roll breaker , Roll sizes dia. 250x1600mm, Fluted rolls , Inlet 1600x150mm, Outlet 1000x140mm, Motor 1x 22 KW, 400/690 Volt, 1x 37KW, 400/690 Volt, Feeding by metering roll , Motor 0,37 KW. 220/380 Volt, With switchgear , Floorspace 4,0x1,1 M, Total height 2,5 M, Weight 5400+1750+450 KG, Extra Specifications Met uitvoerschroef 22 KW, 400/690 Volt Incl. 4 nieuwe walsen What you can expect from Foeth: all our ... more
14
Bruchsal-Büchenau, Germany Germany
6593 km
1993
excellent (used)
L+Z DREHMASCHINE WEILER PRAKTIKANT 160 *TEILÜBERHOLT* - 04-03-218 Lieferzeit: Auf Anfrage Nummer: 04-03-218 Hersteller: Weiler Typ: Praktikant 160 *Teilüberholt* MASCHINENDATEN Baujahr: ca. 1993 L x B x H: ca. 1700 x 1000 x 1700 mm Gewicht: ca. 650 kg Sehr guter Allgemeinzustand - Teilüberholt TECHNISCHE DATEN Digitalanzeige: 3 - Achsen - Digitalanzeige NEU Dimensionen: Max. Drehdurchmesser über Bett: ca. Ø 320 mm Max. Drehdurchmesser über Support: ca. Ø 198 mm Max. D... more
5
Kaiserslautern, Germany Germany
dealership location
6526 km
2003
ready for operation (used)
Injection Unit Screw diameter 135 mm Injection pressure 1643 bar Plasticising rate max 138,00 g/sec (PS) Screw speed 10 U/min Clamping Unit Clamping force 32000 kN Distance between bars 2240 x 1800 mm Additional Equipment Bfgnel9uhl KUKA KR150L 110K This ENGEL DUO ES 160505/3200 Injection Moulding Machine was manufactured in Germany and has been working for approximately 82498 hours. This powerful machine incorporates a clamping force of 32000 kN. A KUKA KR150L 110K robot is included as well... more
Vehicle data - make: Linde - type: H160 - drive type: diesel - carrying capacity: 16000 kg - load Centre of gravity: 600 - lifting height: 4100 mm - range: 0 mm - year: 2009 - operating hours: 10754 - internal No.: 2772a _ ___ Mast data - mast type: standard - height: 4100 mm - height: 3700 mm - free lift: 0 mm - carriage: 2550 mm - forks: 2400 x 200 x 90 mm _ Fb8kmxh Dimensions - length: 5090 mm - width: 2600 mm - height: 3700 mm - weight: 20980 kg _ Battery & charger - battery voltag... more
0
Omagh , United Kingdom United Kingdom
5797 km
2015
good condition (used)
2015 JCB JS160LC 700mm Pads, VG, CV, QH, Piped c/w Reverse Camera, A/C Vssbfy This machine will be sold by Euro Auctions on behalf of Long Eaton Plant Hire at an unreserved auction off site in Derbyshire, UK, 9th October. View full inventory online or for more information contact Matt Wood more
3
Zuzenhausen, Germany Germany
dealership location
6602 km
ready for operation (used)
Power: 75 KW Suitability: Plastics, wood, organic Stoffe3 blade rotor 2. Statormesserreihen rotor diameter: 400 mm working width: 700 mm inlet cross section approx. 400 x 700 mm Drive 75 kW (Serial number: 6128 / second-hand machine) Be9jeo8swk more
2
Barneveld, Netherlands Netherlands
dealership location
6266 km
used
Make Sterling SIHI GmbH (DE), Type M 160, [...] PD 1600-161 A, Material Mild steel, Pump dry vacuum pump, Capacity 160m3/h, Pressure (p1) 1mbar / (p2) 0.1 bar, With motor 5 KW (ATEX II2 G EEx ped IIC T4), Inlet 58mm, Outlet 40mm, New 2001, Floorspace 0,7x0,6 M, Total height 1,1 M, Weight 300 KG, Extra Specifications Gas scrubber system when combined with VUM SKU 245P286 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are rea... more
Engine power: 13.0 hp/HP (10.0 kW), planing shaft: 4 planing knives TERSA, Year of construction: 2016, planing width: 520 mm, thickness height: 240 mm, type: FS 52 Elite, dressing table length: 2250 mm, weight (kg): 700 kg, thick: feed speeds 5.8,12,18 m/min, height adjustment by handwheel with clock, CEE16 A. Balnyamdon more
8
Kaiserslautern, Germany Germany
dealership location
6526 km
2013
ready for operation (used)
General Data Measurements width 4920 mm Measurements depth 1600 mm Measurements height 2100 mm Machine weight 8200 kg Injection Unit Screw diameter 50 mm Stroke volume 250 cm3 Bevnwnn023 Injection pressure 2500 bar Clamping Unit Clamping force 1600 kN Media Internal cooling Yes This Krauss Maffei KM 160-750 CX Injection Moulding Machine was built in 2013 in Germany and has never been used. Operated through a Krauss Maffei control unit, this machine can work with a clamping force of 1600 kN... more
4
Hochheim am Main, Germany Germany
dealership location
6537 km
used
Machine Condition: Completely workshop checked Engine: 5.5 KW Height and swing adjustment electromotor Fine-tuning by hand wheel Accessories: Aluguss bake Availability: In the short term Location: Hochheim Be2gvowumr more
TOP well-maintained machine, immediately free SIEMENS SINUMERIK 840 D, Color flat screen TECHNICAL DATA Working range x-axis (longitudinal) 630 mm y-axis (vertical) 630 mm z-axis (transverse) 630 mm Pallet change device Number of pallets 2 Pallet size 400 x 500 mm Drive power max. 38 kW Speed range up to 10,000 rpm Tool holder DIN 69871 SK40 automatic tool change Number of magazine places 160 EQUIPMENT/ACCESSORIES Machine-full cladding, including cover, etc. Working ... more
4
Birmingham, United Kingdom United Kingdom
dealership location
5775 km
ready for operation (used)
Used Bystronic Bysprint 3015 6kw fiber cnc Laser for sale: Year: 2015 Technical specs / Details table length: 3000 mm table width: 1500 mm Bfgnjxuzp7 burner heads: 6000 Watt / 6kw Bysprint / Bystar fibre laser Description Nominal sheet size xy: 3000 x 1500 mm Cutting area xyz: 3048 x 1524 x 70 mm Positioning accuracy Pa: +/- 0,1 mm Repeatability Ps: +/- 0,05 mm Maximum workpiece weight: 890 kg Operation via panel: ByVision Touchscreen and manual control unit Sheet automation / loading arm / Byt... more
2
Barneveld, Netherlands Netherlands
dealership location
6266 km
used
Type CPKN-C1.V 025-160, No P-105.300 B, New 2012, Material Stainless steel 1.4408, Pump , Capacity 2,90 m3/H, With motor 2,2 KW, 220-240/380-420 Volt (ATEX II 2 G Ex de IIC T4), Inlet dia,40 mm , Outlet dia,25 mm, Mounted on frame , Floorspace 1,0X0,4 M, Total height 2,0 M, Weight 150 KG, Extra Specifications mechanical seal What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. ... more
SEWU Spaleck Screen Bdktk9lxbx Excellent condition 12mm x 12mm screen panels Including Motor Brake more
15
Kaiserslautern, Germany Germany
dealership location
6526 km
2006
ready for operation (used)
General Data Measurements width 4200 mm Measurements depth 2100 mm Measurements height 2700 mm Machine weight 9820 kg Control Unit Brand Cybelec Model ModEva 10S CNC main language German Main Drive Pressing force 160 kN Be9hupri7j Bending length 3050 mm Media Main electronic connection 400 V Additional Equipment Bending tools This Hesse CNC HAP 30160 Bending Machine was manufactured in 2006 in Turkey. It has an overall production time of approximately 10000 working hours. It is equipped wi... more
Single column - eccentric press judge type PEKR 160 Fabr. 1963 No. 11141-63 model Pressure 160 ton. Throat depth 440 mm Table surface 1200 x 800 mm Plunger area 1000 x 700 mm Hwwhkp78u Stroke adjustment 4-125 mm Tappet adjustment 110 mm Height 450 mm Clamping pin hole ø 65 mm with clamp Diarrhea opening in the table 210 x 80 mm Table height above floor 910 mm Stroke rate 55 strokes/min. Need for compressed air 6 bar 11 kW Power supply 400 Volt, 50 Hz -pneumatic feed with Setup f... more
13
Chuck dia. 1600mm. Maximum swing 2000mm. Chuck speeds 0 – 280 rpm. Milling speeds 0 – 3000 rpm.  Max height 1400mm. Axes include A, X, Z, U, W. ATC 24 Tools. Auto clamp.Tooleye. Swarf Conveyor. Main motor 37/45 kW. Fanuc 31i- Model A Control. Year 2011. Selection of Turning Tools and BT50 Spindle Tooling. Bfkq0xczfi more
4
Birmingham, United Kingdom United Kingdom
dealership location
5775 km
ready for operation (used)
COLCHESTER MASCOT 1600  17″ x 40″ GAP BED CAPACITY.  3 & 4 JAW CHUCKS.  QUICK CHANGE TOOL POST PLUS HOLDERS.  DUAL IMPERIAL & METRIC DIALS.  3″ SPINDLE BORE. Be97zy9wxv  SWING OVER CROSS SLIDE : 10 1/2″  SWING IN GAP : 28″  Anilam Dro  16 SPINDLE SPEEDS, 20 – 1600 RPM.12.5 HP (9.3kw) MOTOR. more
2
Barneveld, Netherlands Netherlands
dealership location
6266 km
used
Make KSB, Type CPKN.C1.V 025-200, No P.105.100, New 2012, Material Stainless steel 1.4408, Pump , Capacity 5,0 m3/H, With motor 5,5 KW, 380-420/660-725 Volt (ATEX II 2 G Ex de IIC T4), Inlet dia.40 mm , Outlet dia.25 mm, Mounted on frame , Floorspace 1,1x0,4 M, Total height 2,1 M, Weight 150 KG, Extra Specifications mechanical seal What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worl... more
Vehicle data - make: Manitou - type: P-1000 crane arm extension - drive type:-load capacity: 1000 kg - load Centre of gravity: 1410 - lifting height: 0 mm - range: 0 mm - built: 2016 - operating hours: 0 - internal No.: 110417-417 _ _____ Mast data - mast type:-lifting height: 0 mm - height: 0 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 4000 mm - width: 0 mm - height: 0 mm - weight: 230 kg _ Battery & charger - battery voltage: 0 V -... more
14
Kaiserslautern, Germany Germany
dealership location
6526 km
2011
ready for operation (used)
General Data Machine weight 8900 kg Control Unit Brand ENGEL Model CC200 Injection Unit Screw diameter 45 mm Stroke volume 318 Injection pressure 1521 bar Screw speed 280 1/min Fk3nznf Clamping Unit Clamping force 1600 kN Opening stroke 607 mm Ejector stroke 150 mm Ejector force for / back 61 kN This ENGEL Victory 650/160 Spex Injection Moulding Machine was manufactured in 2011 in Germany. It has been working for only 9024 hours. It is operated with an Engel CC200 control unit. This machine... more

New machines via email!

Yes, send news from this list to my inbox!
Stay updated!
You can create a label.
How often do you want to be notified about new listings?
HOLZKRAFT RLA 160
SELL IMMEDIATELY

with the worldwide market leader from 0,79 EUR per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately

Machineseeker.co.uk is official sponsor of:
Flag us
+1 312 94 04 581
Flag gb
+44 (0) 20 806 810 84
Flag de
+49 (0) 201 857 86 10
Flag nl
+49 (0) 201 857 86 180
Flag pl
+48 (0) 223 076 958
Flag it
+39 800 12 58 38
Flag es
+34 911 433 456
Flag fr
+33 9 80 09 19 36