Used Hsa 2000 for sale (7,654)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Pedpfx Aszizkyjf Asgr Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: new, The Unicraft SHT 2000 hydraulic scissor lift table offers a reliable solution for your lifting projects, e.g. for manually feeding whole stacks of timber into a planer or saw. With an impressive load capacity of 2,000 kg and a robust design, this lifting platform is ideally suited for use in industrial environments. This scissor lift table stands out for its precision and user-friendliness, enabling you to lift heavy loads safely and efficiently. With a maximum table height of 1,010 mm, the Unicraft SHT 2000 is the ideal choice for improving your workflows and reducing strain on the machine operator’s back. Technical data: - Load capacity: 2,000 kg - Minimum table height: 190 mm - Maximum table height: 1,010 mm Pgodpfxjzrx Izj Af Asr - Table surface: 800 x 1,300 mm - Cable length: 3 m - Safety standard: EN 1570 - Drive: Electro-hydraulic - Motor: 1.5 kW - Condition: New with warranty

Year of construction: 2021, condition: excellent (used), functionality: fully functional, IKA MHD 2000/10 powder wetting and dispersing machine, capacity 2500 liters/hour, solids capacity max. 1300 liters/hour, rotor speed 4200 rpm at 50 Hz, 18.5 kW motor suitable for frequency converter 20-60 Hz, product temperature max. 135°C, operating pressure -1 to +16 bar, operating pressure double jacket max. 2.5 bar, liquid inlet DN 25, solid inlet DN 65, outlet DN 50, product contact parts stainless steel AISI 316L or AISI 316Ti9, frame and lantern piece stainless steel AISI 304, weight approx. 400 kg, used in the production of plant-based proteins (pilot plant) Pgjdpfx Aezu I Tfef Ajr

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Pjdpfxjzimqxj Af Ajgr

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s Pjdezrpr Rspfx Af Ajgr speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm milling spindle motor: 35/30 kW spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories Pgodpfx Ajv Rdzbjf Ajr *

Condition: not inspected (used), Year of construction: 1995, functionality: limited functionality, HEBROCK Edge banding machine Euro 2000 Year of manufacture: 1995 Without jointing unit With undercarriage Psdpfx Aozv Eh Nsf Asgr BRANDT Edge rounding machine FB 10 Year of manufacture: 1996 Both machines for €1,500.00

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A -50 Hz Pjdpfjk Eakvex Af Aegr -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Pgodpfxjlatz Dj Af Asr Belt length: 2000 mm

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total length: 2,250 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires Podpfx Afjvhpr Hj Asgr * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), Manufacturer: Hebrock Type: EURO 2000 Year of manufacture: 2001 Radius and chamfer pneumatically adjustable. Pgjdpfezvvtcjx Af Aer Power: 7 kW Workpiece thickness: approx. 10 – 50 mm Edge thickness: approx. 0.5 – 3 mm Minimum workpiece length: approx. 250 mm Minimum workpiece width: approx. 70 mm In very good condition.

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Podpfx Afjzrpnls Asgr Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Twin Shaft Mixer, Twin Shaft Powder Mixer, Twin Shaft Feed Mixer, Halvor Forberg 2000LH, Used Machine Manufacturer: Halvor Forberg Model: 2000LH Overall dimensions: 2660 x 3280 x 2450 mm Mixing paddle size: 375 x 330 mm Podpfxjxt Nuzs Af Aogr Mixer type: Twin shaft Bottom plate: Openable – product discharge is pneumatic

Condition: used, mileage: 412,765 km, power: 162 kW (220.26 HP), first registration: 07/2005, fuel type: diesel, overall weight: 11,900 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, Equipment: ABS, air conditioning, MAN L 2000 horse transport / 5 horses / living area / 220 hp The body is only 4 years old! Vehicle data: First registration: 07.07.2005 * Mileage: 412,765 km * Power: 162 kW / 220 hp * Engine displacement: 6,871 cm³ * Fuel: Diesel * Emission class: Euro 3 * Transmission: Manual transmission * Seats: 5 * MAN L 2000 * Registered as a special-purpose vehicle (motorhome) over 2.8 t ----Horse compartment: Space for up to 5 horses * Spacious horse compartment * Adjustable partitions * Padded dividers * Rear ramp for easy loading and unloading * Roof hatch * Several windows with protective grilles * Ventilation options * Various storage and stowage options ----Living/recreation area: Separate living/recreation area * TV * Radio * Wood paneling * Seating * Cabinets and storage compartments * Control panel for onboard electrical system and utilities * Heating Pedpfx Aozu Uc Hef Ajgr * Numerous storage options ----Cab / Features MAN L 2000 * 162 kW / 220 hp * 6,871 cm³ diesel engine * Manual transmission * 5 registered seats * Driver and passenger seats * Additional seats * Various storage compartments ----Other Spacious MAN L 2000 horse transporter with space for up to 5 horses and a separate living/recreation area. Thanks to the spacious horse compartment, the rear ramp, the adjustable partitions, and the living area, the vehicle is ideal for competition, sporting, and recreational use. Inspection possible by appointment. Errors, changes, and prior sale are reserved. We are available to answer any further questions you may have.

Condition: new, Year of construction: 2026, 🏆🌍WRAVOR WRC 2000 – THE WORLD’S LARGEST HORIZONTAL BAND SAW 💪🏻exceptional heavy-duty horizontal band saw, designed for the sawing of large-diameter logs and demanding industrial applications. 💪🏻massive construction, outstanding rigidity and high cutting capacity 👉🏻 the highest level of heavy-duty horizontal band saw technology. ⚙️ when size, strength and precision matter – WRC 2000 delivers: Psdpfxoztp A Es Af Aegr 🔹 Up to 2,000 mm wheel diameter 🔹 Designed for large-diameter exotic, hardwood logs 🔹 Extremely robust and rigid construction 🔹 Heavy-duty components for demanding sawmill operations 🔹 High cutting capacity and excellent stability 🔹 WRAVOR technology – reliable, durable quality 🔩WRAVOR WRC 2000 – built for the biggest logs and the toughest sawing conditions.

Condition: excellent (used), Year of construction: 2003, For calibration of solid wood/hard wood In line machine ( Fixed table hight : 900 mm ) Max working width : 52 - 1350 mm Min working lenght : 400 mm Working hight : 4 - 170 mm ( Digital motorized up/down ) Infeed speed : 3 - 18 mtr/min Configuration : 1 agg : Steel Roller/drum, 45 Kw 2 agg : Rubber roller/drum, 37 Kw (schore 85 ) 3 agg : Brush Extra new steel roller/drum + extra new rubber roller/drum included ( see pictures attached ) Pjdpfx Ajzuvy Hsf Aogr Extra 15 package of sanding paper included( brand new )

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 325, overall weight: 350 kg, fuel type: electric, color: white, total length: 4,000 mm, total width: 1,000 mm, total height: 1,550 mm, PSA HSA2500 semi-automatic sleeve cutting system for cardboard sleeves Features: Pgsdpfxoy Nyb To Af Aor Manual sleeve loading Automatic clamping Automatic feed Automatic length measurement Automatic cutting process PLC control with display Storage of up to 50 different sleeve lengths and 3 quantity settings Suitable for: Paper sleeves and plastic sleeves with a diameter of 50 to 200 mm Maximum sleeve length: 2500 mm The system is equipped with a 76 mm spindle.

Condition: used, empty load weight: 3,446 kg, maximum load weight: 14,554 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2010, suspension: air, tire size: 265/70R19.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension, ABS (anti-lock braking system), container locking system, skid, U-guard, side aluminum underbody protection, twin tires, storage box. Pgedpfx Aovq Rykef Aor Construction: Skid roll-off trailer for containers up to 7m, 10t BPW axles, drum brakes, 4x pneumatic container locking systems. ACCESSORIES INFORMATION IS SUBJECT TO SUITABLE FOR USE. Subject to change, prior sale, and errors! - .

Condition: good (used), functionality: fully functional, machine/vehicle number: 351H1015830, Year of construction: 2000, operating hours: 9,606 h, load capacity: 3,000 kg, load center: 500 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Perkins, gearing type: hydrostat, tire condition: 55 %, front tire type: pneumatic tires (air-filled), front tire size: 7.00-12, rear tire type: pneumatic tires (air-filled), rear tire size: 23x9-10, overall weight: 5,260 kg, color: red, Equipment: CE marking, lighting, == KEY SPECIFICATIONS == Year: 2000 Hours: 9,606.7 h Lifting capacity: 3,000 kg Mast type: Duplex Drive: Diesel Engine: Perkins Operating weight: 5,260 kg Serial number: 351H1015830 CE certification: Yes == EQUIPMENT & FEATURES == Duplex mast Closed cabin Long forks Front work lights Rear work lights Flashing beacon Exterior mirrors Front windscreen wiper Load capacity diagram == CONDITION == Used condition with visible signs of commercial use. The machine shows dirt, scratches, paint wear and surface corrosion, particularly on the mast, fork carriage and forks, as shown in the photographs. Inspection and operational testing are possible by appointment. == DESCRIPTION == Used Linde H30D-03 diesel forklift from 2000 with 9,606.7 operating hours. The machine has a rated lifting capacity of 3,000 kg, a duplex mast, a Perkins diesel engine and an operating weight of 5,260 kg. Equipped with a closed cabin, long forks, work lighting, exterior mirrors, a windscreen wiper and a flashing beacon. Suitable for industrial material handling, warehouse operations and general loading work. == PRICE, LOCATION & DELIVERY == Podpezuwtzjfx Af Aogr Price: €7,950 excluding VAT Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: used, functionality: fully functional, empty load weight: 540 kg, overall weight: 2,000 kg, first registration: 11/1991, total length: 5,180 mm, total width: 1,900 mm, trailer brake: trailer braked, Year of construction: 1991, Covered trailer: + Anssems + A-S 2000 VV + Registered: 22.11.1991 + 5180mm x 1900mm (lxb) Unladen weight: 540kg; permissible GVW: 2,000kg + Car towing hitch + Aluminum sideboards + Wooden floor + Cover (defective) and bows Pedpozvx Amsfx Af Ajgr SOLD ON BEHALF OF A CUSTOMER! IF INTERESTED, PLEASE CALL DIRECTLY: 01 52 24 48 25 95 Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and misprints possible, subject to prior sale!

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h Pgsdjycc N Sspfx Af Ajr - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: not inspected (used), Mobile portal crane ABUS LPK IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Year of manufacture: 2022 Machine number: 220-251780 Condition: Uninspected Delivery conditions: Free on truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - upon agreement Net price: €6,600 Payment terms: Prepayment - by bank transfer Internal No.: 174-1 Technical data: Crane bridge / crossbeam: approx. 3,600 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of travel/foot beams: approx. 1,980 mm Height of travel/foot beams incl. rollers: approx. 400 mm Lifting device: ABUS electric chain hoist Type: GM 6 2000.3-2 Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Power supply: 400 V / 50 Hz Equipment: Electrically operated chain hoist / load hook (left/right) Scope of supply: Existing documentation as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg Pgedpfezqfn Ejx Af Ajr If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer you transport to the desired location. ► The quoted price is net plus VAT. ► The goods are sold with exclusion of all warranties. ► Technical data without guarantee. ► Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: excellent (used), Year of construction: 2022, operating hours: 2,138 h, functionality: fully functional, turning length: 800 mm, turning diameter: 450 mm, spindle motor power: 11 W, spindle speed (min.): 40 rpm, spindle speed (max.): 400 rpm, spindle bore: 65 mm, travel distance X-axis: 550 mm, travel distance Z-axis: 815 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 1,830 mm, total length: 4,100 mm, total width: 1,960 mm, spindle nose: ASA 6, overall weight: 6,100 kg, spindle diameter: 210 mm, Equipment: documentation/manual, USED ​​2-axis lathe with Fanuc 0i-TF PLUS CNC Pgsdpfxezrnqxe Af Ajr

Condition: used, functionality: limited functionality, Year of construction: 2000, Tree crown tying device: Pgjdezvqznopfx Af Aer + Dröppelmann + Type: KA 2000 + Year of manufacture: 2000 + Wheel loader attachment + Hydraulically driven + Radio-controlled - WITHOUT remote control + From municipal ownership Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, Year of construction: 2006, A production line with 3 KUKA KR 150-2 industrial robots for the production and handling of molded parts is offered. Rated payload per robot: 150kg, max. reach: 2700mm, 6 axes, pose repeatability: +/-0.06mm, protection rating: IP65, mounting position: floor/ceiling, axis speeds: A1: 110°/s, A2: 110°/s, A3: 100°/s, A4: 170°/s, A5: 170°/s, A6: 238°/s, motion ranges: A1: +/-185°, A2: 0° to -146°, A3: +155° to -119°, A4: +/-350°, A5: +/-125°, A6: +/-350°. Including peripheral equipment and accessories. Weight per robot without controller: approx. 1245kg. The production line was used, among other applications, for the production of plant containers and is ideally suited for processes involving plastics as well as processed fiber-based bio-residues and residual materials. It is particularly designed for molding, pressing, handling and automation processes. Inspection by arrangement. Pgjdpfx Afjzu Ndxs Aor