Used Integral Stops for sale (13,497)

Condition: excellent (used), Type: VT 4004 Vötsch Temperature Test Chamber, Air-Cooled Temperature Range: -40°C to +180°C 37 liters Temporal Temperature Fluctuation in the Usable Volume: ±0.2 K to 0.5 K Spatial Temperature Deviation: ±0.5 K to 1.5 K, corresponding to a temperature gradient of 1 K to 3 K Temperature Rate: Temperature change rate according to IEC 60068-3 Heating: 5.3 K/min Cooling: 6.0 K/min Heat compensation: max. 550 W Calibration values: +23°C and +80°C Technical Description VTM 4004 Installation and Operation Data: Test chamber internal dimensions: Width 320 mm, Depth 290 mm, Height 400 mm External dimensions: Width 1000 mm, Depth 780 mm, Height 630 mm Test Chamber: Floor load capacity: 200 kg/m² Point load: max. 15 kg Test chamber lighting: Halogen lamp 20 W, only with additional equipment “door with viewing window” Port openings: 3x port openings Hedpfxjxt D Ays Ad Dsfp 2x diameter 50 mm, installed left side 1x diameter 80 mm, installed left side Refrigeration unit: low-noise, fully hermetic refrigeration, air-cooled Control terminal: Mincontrol Backlit display Plain text display Password protection Input for setpoints; access to stored test programs Temperature limiting software for minimum and maximum chamber temperatures Plain text error messages Control system: Microprocessor-controlled regulation and monitoring system MINCON/32 32-bit technology Integrated program controller Fault diagnostic system Program memory for 100 programs with a total of 1000 segments, 250 loops and 9999 cycles RS 232 interface Communication with user’s PC Networking of up to 32 devices optionally possible via RS 485 Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 0.7 kW Rated current: 4.0 A Refrigerant: R-404A Weight: 115 kg For your safety as a buyer, please note the following information! The following procedures are carried out in advance on chambers offered by us: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and details subject to change and errors) If you have further questions, we will be pleased to answer them by phone.

Condition: used, Werth Type: Werth SCOPE- CHECK 400 3D coordinate measuring machine Technical data: Measuring capacity (X x Y x Z) : 400 x 200 x 200 [mm] Work table with integrated electrical cabinet : 1600 x 950 x 780 [mm] Max. Weight on table : 20 [kg] Operating conditions, * relative humidity, 40 - 70 [%] * Temperature; 10 - 40 [°C] Hfedju Iub Rjpfx Ad Dop Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 micron) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental dimensions Ball screw drive with servo motor Optical magnification (video) : 0.5X to 5X Optical field (video) : 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball Combinable illumination : diascopic, episcopic ring LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Accessories CN Lighting Control via software Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table by joystick Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Changes and errors in the technical data, specifications are reserved!) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), EOS Type: P385 similar to a P390 Laser has been renewed and is unused! Hjdpsubxkmsfx Ad Defp Plastic laser sintering system for the direct production of series, spare parts, functional prototypes and samples for investment casting or vacuum casting. Machine description: Condition of the machine/system: Dimensions: System P385 (dimensions 2000x1220x1250) Cooler (dimensions 930x610x600) Control panel (dimensions 1580x950x800) Control cabinet (dimensions 2100x610x950) Technical data: Effective construction volume 340 mm x 340 mm x 620 mm Construction speed (depending on material) up to 31 mm/h Layer thickness (depending on material) 0.06 – 0.10 – 0.12 – 0.15 – 0.18 mm Support structure not required Laser type CO 2 , 50 W Precision optics F-Theta lens Scan speed up to 8 m/s Power supply 32 A Maximum energy consumption 10 kW / typically 2.4 kW Integrated nitrogen generator (optional) Compressed air supply at least 5,000 hPa; 6 m³/h Voltage: 3/N/PE/ 400 V AC Frequency: 50/60 Hz Modified surface module from a heated nitrogen flood Connection value: 12 kW Rated short-circuit current: 5 kA Fuse: 3x 32 A Current consumption: 18 A Max. laser power (10.6µm) 100 W Laser class open 4 Laser class closed 1 Weight: approx. 1,060 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Perkin Elmer PerkinElmer Lambda 950 UV/Vis/NIR Spectrometer – High-Precision Laboratory Instrument For sale is a PerkinElmer Lambda 950 UV/Vis/NIR spectrometer, a top-of-the-line model for demanding measurements in the ultraviolet, visible, and near-infrared range. This device is ideally suited for material analysis, optical coatings, reflection and transmission measurements, as well as numerous other applications in research and industry. Special features: Thanks to its modular design, the instrument can be optimally adapted to specific measurement tasks – ideal for research institutions, universities, and high-tech industries. Technical highlights: - Wavelength range: 175 – 3300 nm - Resolution: up to ≤ 0.05 nm (UV/Vis), ≤ 0.20 nm (NIR) - Light sources: Deuterium and tungsten-halogen lamp - Detectors: Photomultiplier (UV/Vis), PbS detector (NIR, Peltier-cooled) - Extremely low stray light: ≤ 0.00007 %T at 220 nm - Modular expandability (integrating sphere, URA, large sample chambers, and much more) Technical specifications: - Dimensions (W × D × H): 1,020 mm × 740 mm × 300 mm Hfsdow T Sm Uepfx Ad Dsp - Sample compartment (Primary): 200 mm × 300 mm × 220 mm (W × D × H) - Sample compartment (Secondary): 480 mm × 300 mm × 220 mm (W × D × H) - Weight: approx. 77 kg Condition: used Scope of delivery: (see picture) - PerkinElmer Lambda 950 spectrometer - Standard accessories (sample holders, cables) - Operating software & manual (Subject to changes and errors in the technical data. All information without guarantee!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Scholz Hot Air Autoclave SCHOLZ Hot Air Autoclave – modernized in 2019 – Working autoclave with quick-release closure Description: For sale is a SCHOLZ hot air autoclave that underwent extensive modernization between 2019 and 2024. The system is designed for the thermal treatment of materials under overpressure conditions and offers reliable and precise process control thanks to modern control technology and proven SCHOLZ construction. Modernizations carried out: In 2019: - Installation of a new STANGE 604 program controller including control software and data logging - Integration of a new Siemens SIMATIC S7-1500 controller (TIA Portal) - New thermocouple feedthroughs for 12 component temperature sensors, type K - Installation of new thermocouple panels for connecting thermocouples inside the autoclave - New thermocouple feedthroughs for 12 additional sensors for TUS measurement, including terminal panels inside and outside the autoclave In 2023: - Replacement of several control valves for compressed air and cooling water control In 2024: - Installation of a new rotary vane vacuum pump Modernized, well-maintained condition Status: Final version, revision dated 11.09.2019 Technical Data: Hot Air Autoclave System UNI Magdeburg General Information: Hfodpfexrt Shox Ad Dep - Designation: Hot Air Autoclave System - Outer diameter: 1,350 mm - Cylindrical length: 2,300 mm - Loading length: 1,500 mm Dimensions & Weight: - Autoclave L × W × H: 4,000 × 2,200 × 2,200 mm - Autoclave weight: 4,800 kg - Control cabinet L × W × H: 2,400 × 600 × 2,100 mm, weight: 1,200 kg - Silencer L × Ø: 1,300 mm × Ø 168.3 mm, weight: 40 kg - Total system weight: approx. 6,000 kg Electrical Data: - Operating voltage: 400 V AC ±10%, 50 Hz ±1 Hz - Control voltage: 230 V AC / 24 V DC - Power consumption: approx. 68 kW - Current consumption: approx. 120 A Pneumatic Data: - Control air for regulation: 8–10 bar - Max. pressure at autoclave air inlet: 35 bar (before regulating valve group) - Max. dust/particle size: ≤ 3 µm Cooling Water: - Cooling water pressure: 2–6 bar - Cooling water consumption: 8.0 m³/h Performance / Autoclave operation: - Temperature range: 0–400 °C - Max. operating pressure: 20 bar - Test overpressure: 26 bar Loading weight: - Steel racks & carts: max. 60 kg - Composite: approx. 20 kg - Max. temperature increase (20 → 400 °C): 5 °C/min (approx. 76 min) - Max. temperature decrease (400 → 60 °C): 5 °C/min (approx. 68 min) Environment & Emissions: - Operating temperature range: +5 to +40 °C - Max. relative humidity: 90 % - Max. altitude above sea level: 1,000 m - Autoclave noise emission (1 m distance): ≤ 60 dB(A) - Piping system noise emission: ≤ 80 dB(A) - Short-term noise emission of air duct (1 m distance): ≤ 120 dB(A) - Autoclave: 4,800 kg - Control cabinet: 1,200 kg - Silencer: 40 kg - Total weight ≈ 6,040 kg (~6 tons) Scope of Delivery: - Hot air autoclave including quick-release closure - Heating and cooling system - Air and cooling water distributor - Piping and cabling Note: Missing technical data (e.g., dimensions, weight, performance details) will be provided later. Buyer is responsible for installation and operation. Contact: For inquiries or further questions regarding the system, feel free to contact us. A viewing can be arranged by appointment. (Changes and errors in technical data and details excepted!)

Condition: excellent (used), Coherent Type: 205 F Laser beam source from Coherent COMPex Pro Compact, easy-to-integrate excimer laser. COMPex excimer lasers are highly effective light sources, with a compact design and easy installation and operation. They deliver excellent results in demanding applications, such as solid sampling systems (LA-ICPMS), materials research (PLD) and precise material processing. With ceramic pre-ionization, the COMPex offers output power of several hundred millijoules plus unmatched pulse-to-pulse stability. The COMPex also comes with an improved gas processor that extends the lifetime of both the gas and the optics. Applications • PLD – Pulsed Laser Deposition • Thin wafer processing • Laser lift-off/debonding • LA-ICP-MS Pulse energy1 (mJ) Wavelength 400 Max. repetition rate 50 Hz Electrical: 230 V AC, 16 A, 50/60 Hz switchable, 1-phase Dimensions L x W x H 1658 x 375 x 813 mm³ Hfjdevx Sz Eopfx Ad Djp Weight: 325 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Keysight / Scienlab Battery Test System Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Test System – For Laboratory Use, including PC, software & technical documentation For sale is a professional battery test system consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well maintained, and ideal for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: Characteristic / Description Manufacturer: Keysight / Scienlab Model: SL1001A Year of manufacture: 2020 Voltage / Current / Power: 80 V / 600 A / 24 kW Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m Weight: approx. 700 kg Function: Charging, discharging, cycling of battery modules Condition: Very well maintained, laboratory use Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: Characteristic / Description Manufacturer: Angelantoni Industrie S.r.l., Italy Model: DM500 C 10 ESS SPEEDY BT SP Year of manufacture: 2019 Weight: approx. 1225 kg Temperature range: −70 °C … +180 °C Humidity range: 10 … 98% RH Refrigerants: R449A + R23 Pressure ranges (PS Hi/Lo): 28 bar / 8 bar Wi-Fi integrated CE marking present Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m Function: Temperature and humidity testing, ESS (Environmental Stress Screening) Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A Max. power consumption: 32.5 kW Monitoring / Sampling Unit Dimensions: 0.6 × 0.5 × 0.2 m Measured variables: cell voltages, current, temperature Interfaces: CAN, Ethernet Compatible with Scienlab / Keysight PathWave Software Hsdjxuqk Hopfx Ad Dsfp PC + Software + Documentation Industrial PC with control and measurement software Allows for automated test sequences, logging, and data analysis Overall dimensions / weight (approx.) Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Climate Chamber 1.6 × 2.3 × 3.3 m 1225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Complete system approx. L 3.2 m × W 2.5 m × H 3.3 m approx. 1975 kg Areas of Application: - Development, testing and lifetime assessment of battery modules (e.g., Li-Ion, LFP, NMC) - Fast charging and cycle tests - Temperature and humidity environmental simulation - Research, industrial and university laboratories Scope of delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring / sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: Used Scope of delivery: (See picture) (Specifications and technical details are subject to change or error!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), Zwick / Roell Temperature chamber for AllroundLine Here we offer you a Zwick / Roell temperature chamber for AllroundLine. Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. Hedpfek Rutpox Ad Dsfp External dimensions: Depth 1050 mm Width 600 mm, Height 800 mm Internal dimensions: depth 530 mm width 450 mm, height 650 mm Temperature chambers for the AllroundLine Cooling by means of LN2(liquid nitrogen) -80°C connection to external, is not included) Type: EC75A-1-0-1-0 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: used, Leybold Phoenix Phoenix L 300 – Professional Helium Leak Detector Hodpfx Adjxrz Ido Dsfp For sale is a high-quality Phoenix 300 L Helium Leak Detector with integrated pump. This unit is ideal for precise leak testing in industrial environments, research, and development. Reliable measurement results, robust construction, and easy operation make the PhoeniXL a proven instrument in the field of vacuum and leak testing. Technical specifications: - Maximum inlet pressure: 15 mbar - Measurement range: Up to 12 decades - Minimum detectable leak rates: - Helium (vacuum mode): ≤ 5×10⁻¹² mbar l/s (with oil pump) - Helium (sniffer mode): < 1×10⁻⁷ mbar l/s - Hydrogen (vacuum mode): ≤ 1×10⁻⁸ mbar l/s - Hydrogen (sniffer mode): < 1×10⁻⁷ mbar l/s - Pumping speed (helium) at the inlet: - GROSS mode: 1.0 l/s - FINE mode: > 2.5 l/s - Mass spectrometer: 180° magnetic sector - Detectable masses: 2, 3, and 4 - Ion source: 2 filaments (iridium/yttria oxide) - Connection: DN 25 KF - Start-up time: ≤ 2 minutes - Time to maximum sensitivity: approx. 20 minutes Additional data: - Dimensions (L×W×H): 495 × 456 × 314 mm - Weight: approx. 35.5 – 40 kg (depending on version) - Valves: Solenoid valves - Noise level: < 54 dB(A) - Max. audio alarm: 90 dB(A) - Operating altitude: up to 2000 m above sea level - Permissible ambient temperature: +10 °C … +40 °C - Storage temperature: –10 °C … +60 °C - Relative humidity: max. 80% (at ≤ 31 °C) Electrical data: - Power supply voltage: 100–230 V AC, 50/60 Hz - Power consumption: 350–420 VA - Degree of protection: IP40 - Power cord: 2.5 m Important note: The table shown in the photos is not included in the sale. Condition: used Scope of delivery: (see image) (Specifications subject to change and errors reserved!) For further inquiries, feel free to contact us by phone.

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Hfedpsht U Snjfx Ad Dep Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: used, Chroma Type: ATE 17020 PTS The Chroma 17020 PTS is a highly professional, modular test system for lithium-ion and other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through multiple channels or higher current ranges - Enterprise-grade deployment thanks to extensive safety features & data persistence Technical Data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge testing) Power per channel: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage ranges: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amperes up to > 300 A per channel Parallel operation: Yes, for higher current up to 2600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measurement data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 µs – 1 s / buffer for 60 min power outage Test modes: CC, CV, CP, CC-CV, DCIR, Pulse, Drive Cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection features: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat through energy recuperation Temperature monitoring: Optionally integrable, range 0–90 °C ±2 °C Dimensions & weight: Depending on configuration (e.g., 19″ rack, approx. 300 kg) Power supply: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Hjdpfjwwrxajx Ad Defp Weight: approx. 455 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) Feel free to contact us by phone for further questions.

Condition: excellent (used), pure engineering Type: pureGMC18 System for manual weighing processes Climatic chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specially designed for the gravimetric determination of particulate emissions in exhaust gas analysis and fulfills the normative requirements of the environmental authorities. All necessary climate control components are integrated. In combination with the HEPA filter, a contamination-free and precisely and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Hfjdpfx Aolddmzod Dop Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-decoupled granite for low-vibration installation of an ultra-microbalance Ionization device against static charge Flow protection for shielding the load cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets, earthing bolt Advantages: Meets normative requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45%r.H ± 3% Dimensions W/D/H 1,800/800/1,980 mm Clean room class 5 (ISO14644-1) Power supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Stäubli Type: TX90L Robot / CS8C Controller Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications thanks to their compact, slim design. Thanks to three mounting options: floor, wall, and ceiling, the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) enables use in clean rooms or under aggressive environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Hjdowbqwcjpfx Ad Djfp Patented Stäubli JCM gear modules Long reach Advantages Perfect component protection. Standard version in clean room class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance requirements Optimal use of the workspace Technical specifications TYPE TX90L Number of degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options: Floor / Wall / Ceiling Stäubli CS8 CS8C controller Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical specifications: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/Programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Fill 3D Ultrasound Cutter Here we offer a Fill 3D ultrasound cutting system. Fill 3D-ultrasonic cutter Hjdsf Tph Ijpfx Ad Dsfp 3D-ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fibre-reinforced plastics by means of ultrasonic excited cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to robot) High repeatability High process stability Simple and fast tool change Possible integration into an overall process chain The principle: The linear axis gantry enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC control 840 D allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can easily be made directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis, in order to be able to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data component length max. 1.000 mm component width max. 900 mm component height max. 400 mm path repeat accuracy +- 0,1 mm positioning accuracy +- 0,2 mm Load capacity approx. 30 kg E-control Siemens Sinumerik 840D

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Hodpeg Dglyefx Ad Dofp Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: used, KB Prüftechnik hardness tester type: KB 750 BVRZ Machine type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load level range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (HK 1 only), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic test sequence, evaluation of the impressions on the built-in LCD monitor using a built-in video camera and zoom lens guarantee maximum evaluation accuracy in accordance with the standard. All hardness values are immediately displayed digitally. User-friendly and powerful control panel with color LCD monitor, high-contrast and glare-free. The indentation is measured without parallax. The test forces are electronically controlled and applied with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with basic equipment that enables immediate commissioning with the indenters ordered. A selection of fixtures, test tables, indenters, lenses, hardness reference blocks etc. are available. Connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic machine. Fully automatic test sequence Optical evaluation via integrated video evaluation Extremely user-friendly and powerful large LCD color display industrially designed membrane keyboard Variable software customization zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED illumination Rockwell resolution 0.025 HRC Extremely powerful 200 freely definable test programs Calibration machine accuracy (option) Innovative LED ring light (option) Automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian Hfsdpfxou Hy Ims Ad Dep KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV Depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Test table ∅80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness impression on the LCD display, with movable measuring marks, parallax-free Logically structured, simple operator guidance Creation and storage of any of 200 test programs Automatic force selection by selecting the test method Freely selectable test force application times Freely selectable holding times of the test forces Online help Automatic correction for curved surfaces in accordance with DIN EN ISO Control of the fully automatic test sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 table B1 Report generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages German-English-French-Italian Statistics functions, such as Number of tests Min / Max Mean value Range Standard deviation cp / cpk Histogram (Subject to changes and errors in the technical data!)

Condition: excellent (used), Rexcan Type: 3D scanner Rexcan CS2 + 3-axis swivel table TA 300+ Technical data: 6.0 MP camera 1 lens set Hsdovt Sydjpfx Ad Defp FOV:125,250,500 V:125,250,500 B:95,195,380 H:80,155,320 SPA:0.036, 0.072, 0.145 G:0.01-0.015, 0.02, 0.03 Triangulation angle = 25 degrees PC and software included (screen not included) Scan software: eZScan 2017 Geomagics Control X Version 2018.1.2 Scanner “Rexcon CS2” Rotary table “TA300+” Optics set 125, 250, 500 Calibration plate for all three optics Clamping set Holder for small parts Cabinet on wheels + adjustable with integrated spirit level Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Stationary samples temperature and relative humidity sensor Humidification Irrigation Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Hodpsd Dtn Uefx Ad Defp Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. We may more questions like on the phone for you answered

Condition: new, Ringler Ringler RI 331 industrial vacuum with shaking motor Article number: 99863980002351 Condition: New / new – originally packed (original packaging) Description: You are bidding here on a new Ringler industrial vacuum RI 331 with integrated shaking motor for filter cleaning. The device is in its original packaging, unused, and in as-new condition. Ideally suited for demanding industrial applications. Technical details: Model: Ringler RI 331 Drive unit: Type D3 – soundproofed & splashproof Suction turbine: Direct drive, 3 kW Filter: Integrated surface filter with automatic cleaning Housing color: RAL 9002 (gray-white) Article number: 99863980002351 Advantages at a glance: Robust industrial vacuum technology from Ringler (Kärcher Group) Effective filter cleaning by integrated shaking motor Quiet & durable operation Ideal for workshops, production & industrial environments Condition: new Scope of delivery: (see picture) Hedpod H Ampofx Ad Djfp (Changes and errors in the technical data, information subject to change!) We will be happy to answer further questions by phone for you.

Condition: as good as new (ex-display), Year of construction: 2018, Zwick / Roell Type: EC76G 1-1-2-0 361763 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. Temperature control chambers: width 600 mm x height 1000 mm Temperature control chamber for the AllroundLine Cooling using LN2 (liquid nitrogen) (-80°C external connection, not included) Voltage: 400/230 16A 3N〜50/60Hz Power: 4500W Hfedpfx Aelguwwsd Djp Weight: 180 kg Condition: unused Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Type: ClimeEvent C/2700/70/4/W Weiss Technik ClimeEvent C/2700/70/4/W – High-Performance Climate Test Chamber For sale is a ClimeEvent C/2700/70/4/W climate test chamber, ideal for industrial, research, and development applications. Perfect for demanding temperature and climate testing of large components and assemblies. Technical specifications: - Internal dimensions (H x W x D): 1150 × 1990 × 1200 mm - External dimensions (H x W x D): 2250 × 3800 × 1555 mm - Test chamber volume: approx. 2760 l - Temperature range: –72 °C to +180 °C - Temperature change rate: 4 K/min (heating & cooling) - Temperature uniformity: ±1.0 K to ±1.5 K - Humidity range: 10% – 98% r.h., deviation ±1% – ±3% r.h. - Power consumption: 8000 W (heating/cooling) - Power supply: 500 V - Refrigerant: Eco-friendly R449A/R469A - Air management: Optimized supply and exhaust air regulation - ESD protection: Fully integrated - Software: Compatible with S!MPATI® for test control and documentation Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 33.0 kW - Rated current: 18.5 A Hjdpfx Ajxpg U Rjd Dofp - Test chamber volume: approx. 2760 liters - Weight: approx. 2000 kg For your safety as a buyer, please note the following! The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certification 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) Further questions can be gladly answered by phone.

Condition: excellent (used), Instron Instron 2663-822 Standard Video Extensometer (SVE) Non-contact strain measurement system for materials testing machines Description: The Instron 2663-822 Standard Video Extensometer (SVE) is a non-contact optical measurement system for precise detection of strain during tensile, compression, and flexural testing. Using contactless measurement via digital image processing, markers on the specimen surface are tracked—completely without mechanical influence on the test results. Ideal for applications where traditional contact extensometers (e.g., with blades) are unsuitable, such as with thin, sensitive, or elastic materials. The SVE is compatible with Instron materials testing machines and can be integrated into the Bluehill software (depending on system version). Special features: - Contactless strain measurement – no impact on the specimen - High resolution and measurement accuracy - Ideal for retrofitting older Instron systems - Low-maintenance and robust for laboratory use Technical specifications: Feature / Specification Measurement principle: Optical, contactless strain measurement Fields of view (FOV): 50 mm / 100 mm / 200 mm / 350 mm / 500 mm Resolution: - 50 mm FOV: 3 µm - 100 mm FOV: 4 µm - 200 mm FOV: 5 µm - 350 mm FOV: 25 µm - 500 mm FOV: 50 µm Measurement accuracy: Hfodexvxwkspfx Ad Dsp - 50 mm FOV: ±5 µm or ±0.5% - 100 mm FOV: ±7.5 µm or ±0.5% - 200 mm FOV: ±10 µm or ±0.5% - 350 mm FOV: ±50 µm or ±1% - 500 mm FOV: ±100 µm or ±1% Data rate: 50 Hz Recommended markers: Dots approx. Ø 2 mm (at 50 mm FOV) / Lines approx. 1 mm wide Gauge length: Depending on the field of view, e.g., minimum 5 mm with 50 mm FOV Application range: Tensile, compression, and flexural tests under ambient or temperature-controlled conditions Power supply / interface: Via Instron system controller (compatible controller required) Reliable & durable: Proven Instron model 2663-822 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications, subject to change and error!) We are happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 2022, ICS Cool Energy Type: IC 305 Year of manufacture: 2022 ICS Cool Energy i-Chiller IC 305 – Industrial Water Chiller 8 kW For sale is a compact industrial water chiller (process chiller) of the type i-Chiller IC 305 by ICS Cool Energy. This unit is ideally suited for cooling machinery, processes, or laboratory applications. Features / Equipment: - Integrated hydraulic system (including pump, expansion tank, etc.) - Robust “coil-in-tank” evaporator system for high operational reliability - Compact, space-saving design - Plug-and-play installation – immediately ready for use - Suitable for a wide range of applications: plastics processing, food industry, breweries, recycling, laboratories, and more. Technical details - Cooling capacity: 8 kW (nominal output) - Power consumption: 3.64 kW - Energy efficiency (EER): 2.85 - Power supply: 400 V ± 10 %, 3-phase + PE, 50 Hz Hodpfow S Tuwsx Ad Defp - Max. ambient temperature: 46 °C - Compressor(s): 1 unit - Refrigerant: R410A - Tank volume: 115 l - Dimensions (L×W×H): 660 × 1315 × 1420 mm - Noise level: 81 dB(A) sound power, 53 dB(A) sound pressure - Weight (operating weight): approx. 220 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change or error!) For any further questions, please contact us by phone.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control Hfsdsxbd Raepfx Ad Dop - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Hfedpfx Aewzabqod Dop Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.