Used International 574 for sale (9,322)

Condition: used, Comprehensively tested and refurbished used Winkworth model RT400 316 stainless steel high speed ploughshare (T-Arm) mixer. Material: Stainless steel (316) Capacity: 400 litre (Product Dependent) Mixing Chamber: 1,300mm Long x 800mm Diameter Discharge Type: Centre Bottom Pneumatically Operated Flap Discharge Valve Type Of Blades: T-Arm Blades Motor: 22kW SEW Geared Motor Also includes: (1) Stainless Steel Side Entry Refiner Driven by a 7.5kW Motor. Provision for a Second Chopper. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Ledsx Niwwepfx Agzoak Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. Lajdpswphixefx Agzjk - Kettle...

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Laedpfx Agoxpymajzsk Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, Year of construction: 1980, Technical details: grinding diameter: 380 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock with coolant tank Lajdpjwy Ri Nofx Agzsk *

Condition: good (used), Year of construction: 1995, Machine-Details : Stock-No. 1022-2330 Type of machine Internal and Face Grinding Machine Make GLAUCHAU Type SIP 400x500 Year of manufacture 1995 retrofit Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information : Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Ljdpfx Agox Nibpszeak Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Ljdpfxox Niv Hj Agzjak

Condition: used, machine/vehicle number: YS2S6X2000215xxxx, mileage: 695,038 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 22092 Car specifications: 2018 model Mileage: 695,038 (will check a little) EU approved until: 30.11.26 Euro 6 6x2 650 hp Tires (see pictures) Automatic transmission L ft on 3 axles Full side opening opening on car: 2.94 cm Internal length in cabinet: 6.886 m Internal width in cabinet: 2.496 m Internal height in cabinet: 2,900 m Heating in cabinets 3 rows of lashing rails Brake pads: see picture Clutch plate: 100% Retarder Spring: full air Refrigerator Webasto new Particle filter changed Brake pads on drive shaft changed Clutch replaced 70,000 km ago Air conditioning/ac Radio Light Videos Delivery by appointment   Specifications cabinet beds: 2018 model EU approved until: 10.11.26 4 axles Tires (see pictures) hanger opening: 2.94 cm 3 rows of lashing rails Heating in cupboard (unknown condition) Full side opening Delivery by appointment   Description: We have a 2018 Scania S650 6x2 box truck w/ 2018 spoke 4 axle box trailer w/ full side opening for sale. The car is being sold as a set and everything works as it should according to the owner. What needs to be done is the heating in the cupboard. This has not been used by the owner and is in an unknown condition. So errors and omissions may occur and some cost must be taken into account. The car is in weekly operation so the mileage will increase slightly. Delivery by appointment Km: 695038 HK: 649 Technical approved: Yes EU-approved until: 30.11.2026 Own weight: 13500 Euro: 6 Model: S650 6x2 skapbil m/ 2018 ekeri 4 akslet skaphenger m/ full sideåpning se video Gearbox: Automatic Ledpfex Ncb Aox Agzsak

Condition: used, Used Westfalia model CSA1-06-475 stainless steel clarifier centrifuge. Self cleaning bowl in steam sterilizable design. Internal pressure rated 1.5 bar pressure at 127 deg.c. Capacity rated approximately 13 litre. Unit includes 1.5kw, 1415rpm drive. All mounted on skid. Includes tools Lasdpox Nivysfx Agzek

Condition: used, machine/vehicle number: YS2G6X2000208xxxx, mileage: 375,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22077 Specifications: Lsdpex Ip A Djfx Agzeak 2013 model EU approved until 15.02.2026 Mileage: 375,000 km Euro 5 Wheelbase: 490/135 cm 6x2 480 hp Full air suspension Retarder Internal length: 7.758 m Internal width: 2.454 m Internal height: 2.480 m Full side opening Tail lift Remote control Automatic transmission 2 bunks Climate control / AC Radio See video Description: 2013 Scania G480 6x2 box truck with full side opening.Four air tanks have been replaced on the vehicle.Delivery by agreement. Km: 375000 HK: 480 Technical approved: Yes EU-approved until: 15.02.2026 Own weight: 13120 Total Weight: 27000 Payload: 13805 Width: 255 Length: 1020 Inside width: 245 Inside lenght: 775 Inside hight: 248 Euro: 5 Model: 2013 Scania G480 6x2 skapbil med full sideåpning. Gearbox: Automatic

Condition: used, Used jacketed stainless steel mixing tank by Diessel (D). Total volume 670 l. Working volume approx 500 l. Mixing chamber has internal dimenssions: Ø 985 mm x length of straight side of the wall 1060 mm. Working pressure up to 3 bar at 144 C. Tank has stainless steel heating jacket with volume 52 l. Working pressure up to 3 bar, at 144 C. Top opened by accutator, has mounted paddle type agitator, driven via gearbox and el. motor 1.5 kW. Working rotation of agitator up to 365 rpm. Ledpsx Niy Ejfx Agzjak Central bottom discharge outlet with manually operated valve. Tank is mounted on 4 stainless steel legs and equipped with local control panel with frequency converter. Specifications: Capacity: 132.1 gal Diameter: 3.23' Height: 3.48' Vertical/Horizontal: Vertical Dimensions: Ø 985 x 1060 mm

Condition: used, machine/vehicle number: W09SCUH3NDEN1xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 20702 Specifications: - 2013 model - 3 axles - Lift on 1 axle - Repair item - Internal height: 2.693 m - Internal length: 13.610 m - Internal width: 2.491 m - Lashings - Manual sliding roof - Full side opening - Ready for delivery Description: We have a 2013 HRD 3 axles capitol trolley repair item w/ full side opening for sale. The trolley is sold as a repair item as it is not EU approved and some additional costs must be expected. Laodpfxowqwnms Agzsk Ready for delivery Technical approved: no EU-approved until: 01.04.2025 Own weight: 8340 Total Weight: 45000 Payload: 36660 Width: 255 Length: 1388 Model: 3 akslet kapelltralle ekt m/ full sideåpning

Condition: used, Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bottom heads. Internal rated 2.5 bar design pressure at 150 deg.c. Unit mounted on (4) legs. Specifications: Laodpfx Aex Hwb Eogzek Capacity: 361.9 gal Diameter: 3.94' Height: 2.53' Type Of Heads: welded dished top and welded cone bottom Vertical/Horizontal: vertical Type of stainless: 316L Legs/Lugs: 4

Condition: used, machine/vehicle number: WDB9630201034xxxx, mileage: 269,220 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21642 Specifications: 2019 model 269,220 km (I want to know a little) Euro 6 engine 6x2 530 hp Automatic transmission Spring: full air Tires (see pictures) Refrigeration/freezing unit Zepro lift w/ remote control Longitudinal partition wall Objection length: 8,531 m Internal width: 2.493 m Internal height: 2,740 m P building: bus building Lift and swing on 3 axles Refrigerator Diesel heater Hang on. leather seats Air conditioning/ac Light Radio Ready for delivery Description: We have a 2019 Mercedes-Benz Actrox 6x2 box truck w/ refrigerator/freezer unit for sale. The car is in weekly operation and the mileage will therefore increase slightly. All services and maintenance are carried out at the workshop. There is also a service agreement on the generator. Lodpoxq A T Esfx Agzsak The starter motor and brakes on axle 2 have been replaced. Everything works as it should, according to the owner. Ready for delivery Km: 269220 HK: 530 Technical approved: Yes EU-approved until: 09.03.2026 Own weight: 14700 Euro: 6 Model: Actrox 6x2 skapbil m/ kjøl/frys aggregat Gearbox: Automatic

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Diameter: 1,800 mm Straight Side: 2,450 mm Material of construction: Stainless Steel Laodpfxex Hwbxs Agzek Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 bar Jacket Pressure: 9 bar Internal Temperature: 130°C Type of stainless: Stainless Steel Legs/Lugs: 4 Lugs

Condition: used, machine/vehicle number: YV2X9J0A0FA78xxxx, mileage: 371,740 km, Year of construction: 2015, Please contact ATS Norway for more information Lasdjwv I Ihopfx Agzek Please provide reference number upon request: 20870 Specifications: - 2015 Model - 371,740 km - I-Shift - Euro 6 engine - 340 hp - Tires (see pictures) - 4x2 - Suspension: full air - Zepro Lift - Remote control - Internal width: 2,368 m - Internal height: 2,620 m - Internal length: 7,659 m - Arka body - Full side opening - Air conditioning/ac - Lights - Ready for delivery Description: We have a 2015 Volvo Fm 330 4x2 Box truck w/ full side opening for sale. The car works as it should according to the owner. All services have been done by the owner himself. The car is EU approved and can be put straight into production. Ready for delivery Km: 371740 HK: 340 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 10650 Total Weight: 21000 Payload: 10275 Width: 255 Length: 1011 Euro: 6 Model: FM 330 Gearbox: Automatic

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Power: 11 kW Laodpex Hv U Rofx Agzok

Condition: used, machine/vehicle number: YS2R6X4000218xxxx, mileage: 816,000 km, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 22062  Specifications: EU approved until 28.04.2026 Mileage: 816,000 km Transmission: Automatic Laodpfxex Ip R Ie Agzok Full air suspension 6x4 Tires in good condition Refrigeration/freezer unit Euro 6, 660 hp 18-pallet box body Box body from 2019–2021 (to be confirmed by owner) Partition wall Internal length: 7.42 m Internal height: 2.85 m External height: approx. 4.2 m Bull bar Sand spreader Tool box Trailer hitch VBG coupling 2 bunks Radio/CD Climate control / AC Service history Video available Ready for delivery Description: 2022 Scania R660 6x4 box truck.The vehicle is EU approved and ready for delivery.18-pallet box with refrigeration/freezer unit, box body from 2019–2021.Possibility to purchase 3 identical trucks with approximately the same mileage. Km: 816000 HK: 659 Technical approved: Yes EU-approved until: 28.04.2026 Own weight: 13900 Total Weight: 28000 Payload: 14025 Width: 255 Length: 1021 Euro: 6 Model: 2022 Scania R660 6x4 Skapbil m/ Kjøl/frys aggregat Gearbox: Automatic

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. Includes 12 months warranty. In stock and immediately available. Specifications: Material Grade: 316L Stainless Steel Dimensions: 1110mm diameter X 1230mm straight side Lasdpox Hv T Tefx Agzsk

Condition: used, machine/vehicle number: YS2R6X4000218xxxx, mileage: 800,000 km, Year of construction: 2022, Please contact ATS Norway for more information Lasdpfxox Ip Ruj Agzek Please provide reference number upon request: 22064 Specifications: EU approved until 30.03.2026 Mileage: approx. 800,000 km Transmission: Automatic Full air suspension 6x4 Tires in good condition Refrigeration/freezer unit Euro 6, 660 hp 18-pallet box body Box body from 2019–2021 (to be confirmed by owner) Partition wall Internal length: 7.42 m Internal height: 2.85 m External height: approx. 4.2 m Bull bar Sand spreader Tool box Trailer hitch VBG coupling 2 bunks Radio/CD Climate control / AC Service history Video available Ready for delivery Description: 2022 Scania R660 6x4 box truck.The vehicle is EU approved and ready for delivery.18-pallet box with refrigeration/freezer unit, box body from 2019–2021.Possibility to purchase 3 identical trucks with approximately the same mileage. Km: 800000 HK: 659 Technical approved: Yes EU-approved until: 30.03.2026 Own weight: 14760 Total Weight: 28000 Payload: 13165 Width: 255 Length: 1021 Euro: 6 Model: 2022 Scania R660 6x4 Skapbil m/ Kjøl/frys aggregat. Gearbox: Automatic

Condition: used, Used Tycon approximately 6,000 litre working capacity and 7115 litre total capacity type 808 blue glass lined receiver vessel. Unit measures approximately 2,000mm diameter x 1680mm straight side. Unit has welded dished top and bottom heads. Internal rated full vacuum/2 bar design pressure at -10/+200 degC. Unit mounted on (4) mild steel legs. Specifications: Capacity: 1,585 gal Ledpfx Aex Hv R Sogzoak Condition Of Glass: Used Internal Pressure: 14.5038 psi Internal Temperature: 392°F Vertical/Horizontal: Vertical Diameter: 78.74" Straight Side: 1680

Condition: used, mileage: 192,304 km, Year of construction: 2013, Serial number: VF644AGE00001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20848 Specifications: - 2013 model - 192,304 km Laodpfxjwvywhe Agzok - Eu-approved until: 02.06.25 - Euro 5 engine - Automatic - 4x2 - 219 hp - Front suspension: steel - Rear suspension: air - Internal width: 2,462 m - Internal height: 2,408 m - Internal length: 6,522 m - Tires (see pictures) - Defective lift (due to hydraulic leak) - Zepro lift - Air conditioning/ac - Lights - Heated mirrors - Error codes - Ready for delivery Description: We have a 2013 4x2 Renault Midlum Box truck with a defective lift for sale. There is a defective lift on the car as it has a hydraulic leak. There is also a bad battery on the car. This may need to be replaced. There are also some error codes on the display (see pictures)  besides this, the car starts and works according to the owner. Errors and deficiencies exist and some additional costs must be expected. Ready for delivery. Km: 192304 HK: 219 Technical approved: no EU-approved until: 02.06.2025 Own weight: 5730 Total Weight: 7500 Payload: 1695 Width: 255 Length: 848 Euro: 5 Model: midlum

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Ljdpsx Hv R Esfx Agzoak Specifications: Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 108.778

Condition: used, mileage: 227,000 km, Year of construction: 2016, Serial number: ZCFA775F80265xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21673 Specifications: EU-approved until 01.11.2025 2016 model Approx. 227,000 km Automatic Tires (see photos) 1,500 kg Zepro tail lift Side door Norka box body 3 seats Euro 6 Length: 810 cm Width: 255 cm Wheelbase: 418 cm Curb weight: 4,940 kg 4x2 207 hp Internal length: approx. 613 cm Internal height: approx. 235 cm Reverse camera Lasdpfjxq U T Djx Agzek Radio/CD Air conditioning (A/C) Description:Iveco 75-210 two-axle box truck from 2016.New brake discs, clutch parts, and a front mirror were replaced during the service. last year.Equipped with a Norka box body and a 1,500 kg Zepro lift.Can be delivered on short notice.See video for more details. Km: 227000 HK: 207 Technical approved: no EU-approved until: 01.11.2025 Own weight: 4940 Total Weight: 7500 Payload: 2485 Width: 255 Length: 810 Euro: 6 Model: 2016 Iveco 75-210 4x2 skapbil m/ lift Gearbox: Automatic

Condition: used, machine/vehicle number: WMA18SZZ8DW18xxxx, mileage: 311,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21034 Specifications: EU-approved until 14.11.2026 Mileage: approx. 311,000 km Transmission: Automatic Engine brake Suspension: Steel front, air rear Euro 5, 400 hp Good tires Full side opening 20-pallet box body FOKOR body Zepro tail lift, 2,000 kg Internal length: approx. 8.55 m Internal width: approx. 2.49 m Internal height: approx. 2.42 m 3 seats Air horns 6x2 Radio/CD Reversing camera Climate control / AC Services performed at a local workshop Video available Ready for delivery Description: MAN TGS box truck from 2013.The truck is equipped with a 20-pallet box body and On Spot. Ljdpfxew Hwh Ss Agzeak Km: 311000 HK: 399 Technical approved: Yes EU-approved until: 14.11.2026 Own weight: 11760 Total Weight: 27000 Payload: 15165 Width: 255 Length: 1055 Euro: 5 Model: TGS 26.400 6x2 Skapbil m/ Full sideåpning. SE VIDEO Gearbox: Automatic

Condition: used, machine/vehicle number: ZCFA875F50269xxxx, mileage: 113,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21794 Lasdoxwkfcopfx Agzsk Specifications:• Km: 113,000• Gearbox: Automatic• Engine brake• Euro 6, 207 hp• Good tires• Norka box body• Side door• Internal length: Approx. 6 meters• Internal width: Approx. 2.47 m• Internal height: Approx. 2.34 m• 4x2• Zepro tail lift, 1500 kg• Remote control• 3 seats• Reversing camera• Radio/CD• Climate control/AC• Services performed• Video• Ready for delivery Description:Iveco 75E-210 box truck from 2020.The truck has only 113,000 km.EU-approved and ready for delivery.Some cosmetic damage, see photos. Km: 113000 HK: 207 Technical approved: Yes EU-approved until: 28.03.2026 Own weight: 4980 Total Weight: 7500 Payload: 2445 Width: 255 Length: 790 Euro: 6 Model: 75E-210 Skapbil. 113 000 km! Gearbox: Automatic