Used Inverter Ac Drive for sale (31,592)

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Control Techniques, Brushless AC Servo Drive Bsdjpb Eatepfx Anpolp -Type: MAXAX 100/6000 -Input: 1.5 kVA -Output: 1 kW -Dimension: 315/230/H60 mm -Weight: 2.9 kg

Condition: ready for operation (used), Control Techniques SA038 SPINDAX AC spindle drive, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Bedpsi D Um Eofx Anpslp

Condition: ready for operation (used), Indramat TDA 1.1-050-3-A00 AC main spindle drive, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bljdpfx Aji Ebmqsnpsp

Condition: like new (used), functionality: fully functional, input voltage: 400 V, input current: 251 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP21, year of last overhaul: 2026, continuous power: 132 kW (179.47 HP), Equipment: type plate available, Exact model designation: Danfoss FC-102N132T4E2MH4XLCXXXSXXXXA0BXCXXXXD0 Output power and output current: 132 kW | 260 A 134N1389 ° Includes inspection seal! ° 0 motor operating hours – manufacturer rating allows for over 100,000 hours! ° Easy operation via integrated control panel ° Quick parameter setup possible thanks to the Quick Menu ° Original operating manual for commissioning included Bledpfxjz Rk T Es Anpep Only 3 units left in stock! The item has been reset to factory settings and is therefore in its original condition as supplied by the manufacturer. Please refer to the original product photos for the visual condition. Fully functional and ready for immediate use.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 134N1391, input voltage: 400 V, input current: 381 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP21, year of last overhaul: 2026, continuous power: 200 kW (271.92 HP), Equipment: type plate available, Exact model designation: Danfoss FC-102N200T4E2MH4XLCXXXSXXXXA0BXCXXXXD0 Output power and output current: 200kW | 395A 134N1391 ° Includes inspection seal! ° Only 1.293 motor operating hours – manufacturer rating allows for over 100,000! ° Easy operation via integrated control panel ° Rapid parameter setup possible thanks to Quick Menu Blodpfoz Hyddsx Anpjp ° Original operating manual for commissioning included Only 5 units left in stock! The item has been reset to factory settings and is therefore in its original condition as supplied by the manufacturer. Please refer to the original product photos for its visual condition. Fully functional and ready for immediate use.

Condition: ready for operation (used), Indramat CDM 1.4-A AC main spindle drive, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Bedpfxei Ebbfj Anpelp

Year of construction: 1997, condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device, power supply, AC main spindle drive, spindle controller -Indramat: AC main spindle drive from DMT CD320 cycle lathe -Type: TDA1.3-100-3 API -Item: 244599 K41/96 -Dimension: 325/150/H390 mm Bodpfx Ansn Tvb Depelp -Weight: 10.8 kg

Condition: used, Indramat DDS02.2-W100-BE12-01-FW Digital AC Servo Controller DDS02.2-W100-BE12-01-FW Bjdped Ndy Usfx Anpslp Indramat Digital AC Servo Controller 100A Cooling type: Air You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, ABB ACS600 ACS60100095/94 U1 3 ~ 380...500 V I1hd/I1n 7/11 A I2hd/I2n 7.6/11 A f1 48-63 Hz f2 0…300 Hz ABB ACS600 ACP60100053 U1 3 ~ 380...415 V I1hd/I1n 6/7 A I2hd/I2n 6.2/7.6 A f1 48-63 Hz f2 0…300 Hz ABB ACS600 ACP60100095 U1 3 ~ 380...500 V I1hd/I1n 7/11 A I2hd/I2n 7.6/11 A f1 48-63 Hz f2 0…300 Hz Bedpfer Nd I Isx Anpelp Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), SEW Eurodrive MOVITRAC 3030-403-4X frequency inverter, SN: 19995, used, in good condition, 100% functional, delivery scope as shown in the photos. Bodex Euidopfx Anpelp

Condition: ready for operation (used), SEW Eurodrive MOVITRAC 3030-403-4X frequency inverter SN: 19996, used, in good condition, 100% fully functional, delivery as per photos. Bljdpfxex Euikj Anpsp

Condition: new, Year of construction: 2018, functionality: fully functional, overall weight: 78 kg, load capacity: 15 kg, arm reach: 1,200 mm, Equipment: documentation/manual, We are offering this new Schneider Electric VRKP4S0RNC00000 industrial delta robot for sale. This robot has never been removed from its original packaging! Bljdez Atatopfx Anpep Manufacturer: Schneider Electric Model: VRKP4S0RNC00000 Year of manufacture: 2018 Condition: new in box, never unpacked! If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. Blodpfozil R Rox Anpsp The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, SANYO SANMOTION Servodrive for Y-axis- with firmware for the Y-axis - removed from Wittmann W721 - refurbished3 months warranty: This is provided exclusively by a manufacturer's inspection. The process is carried out by Complast ufacturer: SANYO type: QS1A03AA Bjdpfxst Sbfis Anpolp Dition: überholt

Condition: reconditioned (used), IRD Model B750 End Drive Balancing Machine. Capacity 34,000kg (75,000lbs). Maximum Balance Length 5000mm (Approx). Max Rotor Diameter 3250mm (128"). Max Journal Diameter 508mm (20"). With IRD Model 295 Balancing Instrument and Operating Manual. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79268 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Blodpfx Anjz Eay Nepjp Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, working width: 610 mm, area performance: 2,745 m²/h, overall weight: 208 kg, warranty duration: 12 months, water tank capacity: 55 l, I-DRIVE 65 PROFESSIONAL FLOOR SCRUBBERS - 2745m²/h TECHNICAL DATA: Model: I-Drive 65 Type: Compact Scrubber Series: Professional Condition: NEW Wheel Drive: Yes Battery Charger Included: Yes Power Supply: Battery Battery Type: 6 i-power 14 Batteries Number of Brushes Included (pcs): 2 Brush Working Width (mm): 610 Squeegee Working Width (mm): 790 Water Tank: Clean / Dirty (l): 55 / 55 Theoretical Area Performance (m²/h): 2745 Weight (kg): 208 I-MOP LITE PROFESSIONAL FLOOR SCRUBBERS FLOORS - 1400m²/h TECHNICAL DATA: Model: I-Mop Lite Type: Compact scrubber Series: Professional Condition: NEW Charger included: Yes Power supply: battery Bsdpfxezkr Dts Anpjlp Battery type: i-power 12: 18 V, 12 Ah Number of brushes included (pcs): 2 Brush working width (mm): 370 Squeegee working width (mm): 370 Water tank: clean / dirty (l): 3 / 3 Theoretical surface efficiency (m²/h): 1400 Weight (kg): 16.8 WHY CHOOSE THE I-DRIVE 65 + I-MOP LITE SCRUBBERS The combination of the I-Drive 65 and the I-Mop Lite is a concept developed by I-Team. A 2-in-1 solution – an efficient ride-on scrubber for large areas with the ability to immediately use the compact I-Mop for thorough cleaning in areas inaccessible with a traditional machine. This allows a single operator to thoroughly clean the entire facility without having to change equipment. One machine for multiple surfaces – the I-Drive 65 effectively cleans large, open spaces such as halls, warehouses, shopping malls, and airports. When narrow passages, corners, or under furniture need cleaning, the operator simply removes the I-Mop Lite from the rear handle and continues working without changing positions. ADVANTAGES OF THE I-DRIVE 65 Easy to use - Clear icons and a simple control panel. One-button activation of the brushes and suction system. Automatic fill system - Stops at the fill line, preventing water from splashing or dripping into the battery compartments. Hidden safe - For storing a wallet or phone. Adjustable foot pedal - Easily adjust settings to suit operator preferences. Clear front view while driving. Easy squeegee removal with the push of a button. The ramp can be quickly assembled for loading and unloading. I-MOP LITE BENEFITS Easy to use - Only 4 buttons, no training required. Super lightweight - Improved ergonomics and increased job satisfaction for cleaners. Microban® antibacterial tank - Prevents bacterial growth for long-lasting hygiene and protection. No trip hazard - Operates on portable lithium batteries instead of a long cord. Brushless motor - Low noise and longer runtime. Efficient cleaning of all hard floor surfaces - 500 RPM high-speed brushes.

Condition: excellent (used), 3HAC025338-002 Main Servo Drive Unit, DSQC 617 D6_2E2C2B, 20% discount when ordering more than 1 unit. DEVELOPMENT OF GSG ROBOTICS Bedpfez Tac Iex Anpelp GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), ABB 3HAC029818-001 DSQC 663 Drive Unit DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, providing comprehensive service coverage for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all aspects of industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Blsdpfx Ansz Tad Sjpjp

Condition: used, Micro-welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO, Type ISQ-MG - Spot welding head MIYACHI PECO, Type F160S - 25 mm stroke with Heidenhain measuring system - Connection cable Mains voltage: 3 x 400 V AC Mains frequency: 50 / 60 Hz Connected power: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external ring coil Control panel: MFT1 (independent, detachable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault monitoring and process monitoring Bedpfx Anspy Uzyjpelp - Monitoring of current, voltage, power, energy - Test pulse for part detection - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force activation from 1.2 to 550 N - Position measuring system Heidenhain Welding unit with 5 pneumatic cylinders and Festo Type CPX valve manifold Welding head mounted on a horizontal guide rail and movable by 20 mm via a pneumatic cylinder. 3 pneumatic cylinders for workpiece fixing are available (2 with 46 mm stroke, 1 with 20 mm stroke). Welding tip overhang 300 mm Welding tip height above floor 315 mm Dimensions of welding unit W x H x D 410 x 760 x 700 mm Weight of welding unit 75 kg Total weight 100 kg

Condition: excellent (used), Year of construction: 2018, Premier Pallet Inverter / Pallet Turner Year 2018 Blsdpfjwt S N Rex Anpsp Electrohydraulic operation Maximum opening 1875mm Minimum opening 1050mm Load capacity 2000kg Safety fencing included The FS 1900 Pallet Inverter Primary Uses: Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure

Condition: ready for operation (used), Indramat KDA 1.1-100-300-W1-220 AC. Main spindle drive, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Bodpfei Ebgyox Anpolp

Condition: ready for operation (used), Indramat RAC 2.2-250-380-A00-W1 main spindle drive SN:232713-05451, used, normal signs of wear, 100% functional, delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Bjdpfsx Dw H Hox Anpjlp

Condition: good (used), Schuma Drive Conveyor Belts 37x310cm Made in Germany 380V Power Supply Bsdpfx Aoz R In Tsnpelp 100% functional, in very good condition. Dimensions: 37x310cm, 40x300cm (total width). Price is for two units.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, overall weight: 450 kg, Alba Drive EBUDAH 001 Function of the machine: during the production generated glass waste can you cutting safe and free from accidents, the waste can be collect in the under located - with forklift movable - emptying container. Size of workplace Length: 3500 mm Height: 1800 mm Width: 3000 mm Blodpfxod Nfb Us Anpop Electric demand: 2,7 KW Supply voltage: 3x400 V Phase number: 3 The main components of the machine: - breaking unit - loading-tilting table - passive accident protection fence - control cabinet with power disconnect swith - air preparation - keypad unit If you need more information, We're here to help! Please contact us on the contact form or call us!

Condition: ready for operation (used), Indramat CDM 1.4-A AC main spindle drive, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Bledji Ebbiepfx Anpsp