Used Ip55 for sale (190)

Condition: used, machine/vehicle number: 07040478, Electric Motor AC Motoren GmbH Type AH 315 MA-4 Hjdsc Sqvljpfx Aftsfr 400/690V 50Hz 132 kW 1485 RPM 440 60Hz 158 kW 1782 RPM 228A IP55 Complete with cooler make Wistro 380-500V 50/60Hz 255/370W

Condition: refurbished (used), The overhauled vacuum pump is available from stock and ready for immediate use. We recommend installation only by trained personnel. Adaption materials available on request. Oil filling: M4 Delivery time: approx. 5 weeks Hedpottzh Aefx Aftsfr Technical data: 6.0kW 3x400/690V +/-10% 50Hz IE2 3000 rpm B5-300 size 132S IP55 insulation class F Cold conductor temperature sensor Inlet: protective cover Outlet: protective cover Ultimate pressure of forepump: 5.8 x 10-1 mbar Ultimate pressure of both pumps: 1.1 x 10-2 mbar Subject to prior sale! This offer is valid only for customers within Germany and European countries!

Condition: used, Year of construction: 2020, functionality: unexamined, total height: 6,400 mm, total width: 4,500 mm, total length: 3,800 mm, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Open height mm 1500 Total front mm 3800 Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. • Safety is ensured by a laser and area protection with light barriers of level IV. Hfjdswlrv Uspfx Aftor

Condition: good (used), Year of construction: 1997, three-phase motor, electric motor -Manufacturer: Flender ATB-Loher, electric motor explosion-proof -Type DNGW-225MB-04R -Power: 45 kW -Speed: 1475 rpm / Inverter operation 145 - 1475 rpm Hodswwhrpjpfx Aftefr -Shaft: Ø 60 x 105 mm -Protection class: IP55 -Design: B3 -Number: 2x motor available -Price: per piece -Dimensions: 900/450/H655 mm -Weight: 411 kg/pc.

Condition: new, weight max. 0,25 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Hsdpfsh Un Hdsx Aftsfr Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: used, Electric Motor WWE American Model !! Type WWE250-18-449T 460 60Hz 250 HP (PS) 1790 RPM Hsdpfxjc Sqvvs Aftsfr 282A IP55

Condition: used, Electric motor, three-phase motor -Power: 2.2 kW Hsdpfx Asfff Nroftjfr -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -with: fan -Dimensions: 585/250/H260mm -Weight: 29 kg

Condition: new, weight max. 1,0 t stroke 4000 mm Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Hfodeh Un Haspfx Aftor Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Ruhr gearbox, geared motor type SN9BFH 40:1 -Power: 0.37 kW Hedsqa I Hrjpfx Aftsfr -Speed: 35 rpm -Protection rating: IP55 -Engine: Type H7 1B/4 -Power: 0.37 kW / 1390 rpm -Hollow shaft: Ø 19 x 90 mm -Dimensions: 330/180/H155 mm -Weight: 8.8 kg

Condition: new, weight max. 0,5 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 500 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Hfedpfxeh Un E So Aftor Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 1 / 4 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: good (used), flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: Nord, flat gear motor -Type: SK 3282A-100 L/4 i= 42.02 Hfsdpfx Aot E D Sfjftsr -Speed: 34 rpm -Engine: Type SK 100 L/4 -Power: 2.2 kW / 1440 rpm -Hollow shaft: Ø 40 x 175 mm -Protection class: IP55 -Dimensions: 470/290/H380 mm -Weight: 62 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: Lammers, electric motor type 7AA90L04 -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 24 x 50 mm -Design: B3 Hfodpfxst Dri Ao Aftjr -Protection class: IP55 -Number: 3x motor available -Price per piece -Dimensions: 330/173/H220mm -Weight: 16 kg/piece

Condition: used, Year of construction: 1984, Gear motor, electric motor Hfjdpfx Afot Drkajter -Manufacturer: Eberhard Bauer, gear motor type DO 42 F 04/141 -Speed: 250 rpm -Power: 110 W / 2700 rpm -Shaft: Ø 10 x 25 mm -Design: B5 -Protection class: IP55 -Number: 4x motor available -Price per piece -Dimensions: 250/110/H110mm -Weight: 3.6 kg/piece

Condition: good (used), flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: SK 4282A-G-100 L/40 i = 43.65 -Speed: 33 rpm -Engine: Type SK 100 L/40 -Power: 3 kW / 1410 rpm -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 Hfjdpfx Ast E D N Djftsr -Dimensions: 530/260/H465 mm -Weight: 85 kg

Condition: good (used), Year of construction: 2018, flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: Nord, flat gear motor with brake Hfjdet E D Rujpfx Aftor -Type: SK 0182NBA-71S/4 BRE5 i= 59.33 -Speed: 23 rpm -Engine: Type SK 71S/4 BRE5 -Power: 0.25 kW / 1380 rpm -Hollow shaft: Ø 25 x 100 mm -Brake: 5 Nm -Protection class: IP55 -Number: 2x motor available -Price: per piece -Dimensions: 380/200/H205 mm -Weight: 12 kg/piece

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRN80M4/RS/TF/AL -Speed: 1435/24 rpm i= 58.60 Hjderanm Aopfx Aftjfr -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP55 -Dimensions: 480/210/H170 mm -Weight: 22 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type W20 DR63M4/TF/IS -Speed: 28 rpm -Power: 0.18kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 Hfedpfx Asm Dyhfsfter -Dimensions: 300/180/H120 mm -Weight: 7.6 kg

Condition: used, Three-phase motor, electric motor -Condition: unused -Manufacturer: Aerzen Weg, electric motor type: 200L-02 -Power: 30kW -Speed: 2970 rpm -Shaft: Ø 55 x 110 mm -Construction: B3 -Protection class: IP55 -Number: 3x motor available Hfsdpjgvm A Tefx After -Price per piece -Dimensions: 770/400/H510 mm -Weight: 226 kg/pc.

Condition: used, Gear motor, electric motor, three-phase motor Hodpfx Asffakboftefr -Handover: as is as on pictures -Fixing: damaged -Power: 2.2 kW -Speed: 11 rpm -Shaft: Ø 60 x 120 mm -Construction: B3 -Protection class: IP55 -Dimensions: 745/340/H345 mm -Weight: 119 kg

Condition: used, Electric motor, three-phase motor -Power: 3.0 kW -Speed speed: 955 rpm -Shaft: Ø 38 x 80 mm -Design: B5 Hsdpfxofghcxo Aftjfr -Recess: Ø 230 mm -External flange: Ø 300 mm -Protection rating: IP55 -Dimensions: 590/302/H295 mm -Weight: 67kg

Condition: used, electric motor, three-phase motor -Manufacturer:Dietz, electric motor type FDR100LB/ 4 P -Power: 2.5 kW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -Dimensions: 360/300/H250 mm -Weight: 30 kg Hfedpfxjurn Tas Aftsr

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, geared motor type GST04-2M VCK 071C32 -Speed: 44.6 rpm / Torque: 77 Nm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Dimensions: 395/200/H160 mm -Weight: 11.7 kg Hodpfx Afoq Syt Eetsfr

Condition: good (used), gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type SUA 506B IA 81N4 -Speed: 13.7 rpm -Engine: Type WAF81N4 0.75 kW -Shaft: Ø 30 x 125 mm -Protection class: IP55 -Dimensions: 480/210/H240 mm Hodpsvzx Hyjfx Aftefr -Weight: 37 kg

Condition: used, gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer gearbox: SITI, worm gear type MI 60 F GR/19 38/1 -Speed speeds: approx. 30 rpm i= 45:1 -Engine manufacturer: Lafert Type ST 80/4 -Power: 0.52 kW Hfsdeuza Rqjpfx Aftjr -Protection class: IP55 -Hollow shaft: Ø 25 x 120 mm -Dimensions: 420/220/H200 mm -Weight: 17.4 kg

Condition: used, Gear motor, electric motor, electric gear motor, worm gear motor Hfsdpjt E D Erefx Aftor -Manufacturer: RTZ Witte, worm gear motor -Gearbox: RTZ Antriebstechnik/ Varvel Type FRT 85/B3 1/100 IEC80B14 i= 100 -Speed: approx. 14.3 rpm -Engine: WitteType WW 80-4 -Power: 0.55 kW / 1430 rpm -Protection class: IP55 -Shaft: Ø 32 x 70 mm -Dimensions: 485/210/H320mm -Weight: 22 kg