Used Jaesper for sale (19)

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 230 V, total width: 2,450 mm, total height: 1,550 mm, total length: 10,000 mm, table height: 800 mm, positioning speed: 20,000 m/min, space requirement length: 10,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, height adjustment type: pneumatic, ESAB E-Vent Plasma Cutting System + Hypertherm Powermax 1000 – Year of Manufacture 2006 – Defective / For Hobbyists Knodsx Ap Tpspfx Agzof For sale is an ESAB MXL-P 2000, E-Vent plasma cutting system (year 2006) including a Hypertherm Powermax 1000 plasma source. The machine is defective and is being sold as a non-working unit/parts donor. The Powermax 1000 is present; operational status has not been tested. Key technical data (ESAB E-Vent): * Machine length: approx. 7000 mm * Cutting length: approx. 6000 mm * Machine width: approx. 2450 mm * Cutting width: approx. 1500 mm * Machine height: approx. 1550 mm * Weight: approx. 1500 kg * Voltage: 230 V / 50 Hz, Power consumption 2 kVA Ideal for: * Refurbishment * Conversion to new control system * Parts procurement (gantry, guides, table, plasma source) No warranty, no returns.

Condition: used, functionality: fully functional, Year of construction: 2004, Shear: HACO TS 3006 Working length: 3050 mm Capacity regular steel: 6 mm (400 N/mm²) Back gauge length: 750 mm (motorized) Controller: SP 8 Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of sheet supports: 8 × 500 mm, 1 × 1000 mm (left stop + measuring bar) Equipped with sheet support device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at largest angle: 6 Working height: 770 mm Motor power: 7.5 KW Knjdpfx Agexy Illezef Total length: approx. 3880 mm Total height: approx. 1700 mm Total width: 1650 mm Weight: approx. 4500 kg Year of manufacture: 2004 Delivery and installation at your location are of course possible; delivery charges and any additional costs in consultation. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to selling sheet metalworking machines, we offer a complete package for service, maintenance and repairs.

Year of construction: 2009, operating hours: 500 h, condition: like new (used), functionality: fully functional, This 2009 machine has worked around 500 hrs. It looks and smells like almost new. Belt conveyor. Ideal for portotyping and/or glue curing Knedpfx Agjwiwz Dezjf

Condition: new, Year of construction: 2022, Available from stock Laser Power: 1,000 W Laser Wave Length: 1020 nm - 1080 nm X-axis range: 3000 mm Range Y-axis: 1500 mm Max. Acceleration plate cutting: 0.5 G Maximum simultaneous axes speed: 40 m/min Positioning accuracy: ± 0.03 mm/m Repeating accuracy: ± 0.02 mm/m Working voltage: 230V/50Hz ± 5% Cutting gases: Oxygen, Compressed air, Nitrogen Cutting table: 3000×1500 mm Machine weight: ± 2,500Kg - Max. weight of plate per change table: 700 Kg ===== In addition, the machine is equipped with the following options: Control: Cypcut Pull-out drawers for collecting small parts Aviation aluminum beam 1,000 watt Max Photonics EU Laser source Cutting head: Raytools BM111 Closed top and full machine enclosure Proportional pressure control for Oxygen (low pressure) Water cooler Power stabilizer Automatic lubrication unit Kjdpsu E T D Sefx Agzonf

Condition: like new (used), Year of construction: 2024, functionality: fully functional, conveyor belt length: 500 mm, conveyor belt width: 460 mm, Brandnew or as-is. We have both. Kodpfxevtph Ss Agzenf

Condition: like new (used), functionality: fully functional, Year of construction: 2025, control type: CNC control, controller manufacturer: ROBOSOFT, bending force (max.): 135 t, distance between stands: 2,600 mm, HACO ATLANTIC ERM 30135 AVAILABLE FROM MARCH 2026 Press Brake Specifications: Kjdpfxexvd T Rj Agzjnf Working length: 3100 mm Capacity: 135 tonnes Distance between side frames: 2600 mm Throat depth: 250 mm Daylight opening: 400 mm Stroke: 200 mm Table height: 915 mm Motor power: 15 kW Total length: 3500 mm Total depth: 1700 mm Total height: 2500 mm Weight: 7800 kg Year of construction: 2025 Furthermore, the machine is equipped with: - Easybend 2D CNC touch control - 4-axis backgauge (X-R-Z1-Z2 axis) - CE SLOW version (side doors, rear light curtain, and special covers with sensors) - CNC-controlled crowning - Equipped with DSP lasersafe finger detection (for use during rapid approach) - Quick manual clamping for European standard tooling, height 150 mm

Year of construction: 2020, condition: ready for operation (used), Preowned machine. 100% checked and working. Including 1x SMEMA cable Knedpfx Agovtpahszof

Condition: like new (used), functionality: fully functional, Year of construction: 2019, HACO TS 2006 in very good condition Working length: 2050 mm Capacity (mild steel): 6 mm (400 N/MM²) Backgauge length: 750 mm Control: SP-9 motorized backgauge with digital readout Ksdpfx Aoxpm Iqsgzonf Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side stop 1500 mm with ball rollers included Equipped with support system: No Working height: 770 mm Motor power: 7.5 KW Total length: approx. 2800 mm Total height: approx. 1660 mm Total width: 1905 mm Weight: approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location is possible, with delivery and additional costs to be discussed. Since 2019, we have been the official Dutch dealer for HACO press brakes and guillotine shears. In addition to sheet metal machinery sales, we offer a complete package of services for maintenance and repairs.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: PBT460-1000, conveyor belt length: 1,000 mm, conveyor belt width: 460 mm, This is a brandnew VANSTRON PBT460-1000 conveyor. As we will be terminating our relationship with VANSTRON we will offer this at nett buying price. Knedpfxovtph Ej Agzef

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 3,100 mm, distance between stands: 2,600 mm, operating speed: 200 mm/s, back gauge: 1,000 mm, overall weight: 8,500 kg, total length: 3,770 mm, total width: 1,855 mm, total height: 2,540 mm, pressing force: 150 t, HACO OPTIFORM 30150 (IN STOCK) HACO OptiForm. Compact, powerful and quickly available. With over 60 years of experience in sheet metal working, HACO introduces the new OptiForm press brake: a compact, high-quality machine built in Europe that combines premium performance with a surprisingly competitive price. Despite its compact size, the machine is built on the basis of the proven technology of the Synchromaster series. Think of the same hydraulic connections and high-quality components – a solid basis for reliability and a long service life. Ksdpjwnddvefx Agzonf Press brake features: Working length: 3100 mm Capacity: 150 tons Distance between the cheeks: 2600 mm C-frame discharge: 400 mm Daylight opening: 480 mm Table height: 965 mm Rapid travel Y-axis: 200 mm/s Press travel Y-axis: 10 mm/s Return travel Y-axis: 130 mm/s Motor power: 15.0 kW Total length: 3770 mm Total depth: 1855 mm Total height: 2540 mm Weight approx. 8,500 kg The machine is also equipped with: ===== - EASYBEND 2D CNC control - 4-axis back gauge X-R axis travel 1000 - CNC controlled crowning - Equipped with DSP lasersafe finger detection - Fast manual clamping for European Standard tools, intermediate pieces height 150 mm or 100 mm - Movable support arms Delivery + installation at your location is of course possible, delivery costs and additional costs in consultation. We have been the Dutch dealer for HACO press brakes and shears since 2019. In addition to the sale of sheet metal working machines, we offer a total package for service, maintenance and repairs.

Condition: ready for operation (used), machine/vehicle number: SH-1206, Hölzer LOW mini depanelling machine for asle. Serviced, ready to go. Including PC software to generate machine program. Excellent condition. KVMS is the authorised representative for Hölzer in Belgium. So you can reply on the quality. System is complete with Nilfisk EX safe exhaust system. Kedpfx Agjwd Spxszjnf

Condition: new, Year of construction: 2025, The Senfeng NT series profile lasers is a profile laser with 3 jaw plates and a horizontal machine frame. Suitable for medium to large production requirements with light to medium industrial requirements. The NT series can be extensively equipped with loading and unloading systems and can be equipped with up to a 6 kilowatt laser source. Knodpfovvh Tlox Agzof Because the NT series is equipped with a 3rd jaw plate, you can achieve up to 0 mm tailing and high accuracy when processing longer length profiles. With Senfeng we offer fiber lasers at a competitive price with service from our own mechanics. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install this with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. Technical data: - Laser Wave length: 1020 nm – 1080 nm - Maximum tube length: from 3200 - 15200 mm - Maximum profile weight: 700 kg - Tube cutting capacity: Ø 10 - 350 mm - Tube cutting capacity: 10x10 - 350x350 mm - Speed of rotation of the chucks: Depending on the size of the chucks - Speed of the axes: Depending on the size of the chucks - Operating voltage: 400V / 50Hz ± 5% - Tailing (residual material): 0 mm - Cutting gases: Oxygen, Compressed air, Nitrogen ===== In addition, the machine is equipped with the following options: - Control: TubePRO - Follow-up supports controlled by a ball screw. This means that unequal profiles are continuously supported and you can process material more accurately - Valve for collecting small pieces. This is opened and closed in the control with an air cylinder - Pneumatic jaw plates, for fast and precise clamping - Various automations possible - Aviation aluminum beam - Cutting head: Depending on the power - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer - Automatic lubrication unit

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DLS-350, VANSTRON DLS_350 Pusher Stacker. year 2022. Like new. Knedpfx Agjvtpf Rozsf

Condition: new, Year of construction: 2025, The Senfeng T series profile lasers are Senfeng's entry-level model for processing profiles. The machine frame can be equipped with a wide range of jaw plates and machine bed lengths. The machine can also be equipped with a 2.5D cutting head or 3.0D (Bevel) cutting head. Kjdpfx Aevvh Ngegzsnf With Senfeng we offer fiber lasers at a competitive price with service from our own mechanics. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. Technical data: - Laser Power: Up to 6,000 watts - Laser Wave length: 1020 nm – 1080 nm - Maximum tube length: up to 15200 mm - Maximum profile weight: depending on the jaw plates and length of the machine bed - Tube cutting capacity: Ø 8-350 mm - Tube cutting capacity: 8x8 - 350x350 mm - Chuck rotation speed: Depending on the jaw plates - Axes speed: Depending on the jaw plates - Operating voltage: 400V / 50Hz ± 5% - Tailing (residual material): 70 mm - Cutting gases: Oxygen, Compressed air, Nitrogen ===== In addition, the machine is equipped with the following options: - Control: TubePRO - Follow-up supports controlled by a ball screw. This means that unequal profiles are continuously supported and you can process material more accurately - Valve for collecting small pieces. This is opened and closed in the control with an air cylinder - Pneumatic jaw plates, for fast and precise clamping - Various automations possible - Aviation aluminum beam - Laser source: Max Photonics or IPG - Cutting head: Depending on power - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer - Automatic lubrication unit

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, NUTEK NTM310IXL Inverter (FLIP) unit. 2018. Looking very very good. Kjdpovtpfdefx Agzonf

Condition: new, Year of construction: 2025, The Dual MFA from Erbend is the most complete machine from Erbend Swivel Bending Machines. Thanks to the double swivel technology and clamping by ball screw spindles, you can use this machine to set up many different products of different thicknesses. In addition, you spend less time on manual actions because it can swivel on both sides. Ideal for entrepreneurs who are looking for a machine that makes light work of producing large plates. This solution is many times more ergonomic than the traditional method with press brakes. Besten Machines has been a dealer for metalworking machines for more than 25 years. We specialize in servicing, maintaining, selling and advising on machines in the sheet metal working industry and have a nice portfolio of suppliers. We invest structurally in spare parts and mechanics to guarantee a high level of service. Installations are provided by our own mechanics. Technical specifications: Ksdsvu U Exepfx Agzonf - Folding length: 3200 mm - Capacity Steel (S235): 3 mm - Capacity Stainless steel: 2 mm - Capacity Aluminum: 4 mm - Machine dimensions: 2200x5100x2300 mm - Machine weight: 8,500 kg - Machine is equipped with a motorized rotating clamping bar. - Machine is equipped with a motorized rotating folding bar - Height of top tool: 125 mm + partial sets - Pneumatic clamping for top tool - Standard back gauge 1500 mm length - Suction cups integrated in back gauge - Foot pedal with 3 functions - Equipped with light curtain at the front - Manual crowning - Motorized CNC beam - Erfold 3D software

Condition: new, Year of construction: 2025, The Senfeng SF3015H4 is a machine for heavier production requirements. With an extra heavy frame, this machine is suitable for higher production requirements. This frame is also prepared for possible automation. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 12,000 W - Laser Wave length: 1020 nm - 1080 nm - Range X-axis: 3000 mm - Range Y-axis: 1500 mm - Max. Acceleration plate cutting: 2.8 G - Maximum simultaneous axes speed: 200 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 9,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 3,000 Kg Knsdpfx Ajvtzbqogzof ===== In addition, the machine is equipped with the following options: - Control: Hypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 12,000 watt Max Photonics EU Laser source - Cutting head: Boci BLT441 - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)

Condition: new, Year of construction: 2025, The Senfeng H1 is Senfeng's best-selling model! This is our entry-level fiber laser with interchangeable table, suitable for a power of 1 to 6 kilowatts, this can process up to 25 mm of steel Ideal for the entrepreneur with a medium to large production requirement. Besten Machines has been a dealer for metalworking machines for more than 25 years. Knodpevty N Tofx Agzef We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 6,000 W - Laser Wave length: 1020 nm - 1080 nm - X-axis range: 3000 mm - Y-axis range: 1500 mm - Max. Acceleration plate cutting: 1.2 G - Maximum simultaneous axes speed: 130 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 6,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 700 Kg ===== In addition, the machine is equipped with the following options: - Control: Cypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 6,000 watt Max Photonics EU Laser source - Cutting head: Precitec Thunder - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)

Condition: new, Year of construction: 2025, laser power: 3,000 W, The 1530G is the ideal middle ground. This compact model saves a lot of space in your workshop due to the absence of a change table. At the same time, large format plates can be processed on this machine. Kedpfxovty E Uj Agzonf Ideal for the entrepreneur who has a low to medium production requirement with a small floor space. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 3,000 W - Laser Wave length: 1020 nm – 1080 nm - X-axis range: 3000 mm - Y-axis range: 1500 mm - Max. Acceleration plate cutting: 0.8 G - Maximum simultaneous axes speed: 80 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 4,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 700 Kg ===== In addition, the machine is equipped with the following options: - Control: Cypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 3,000 watt Max Photonics EU Laser source - Cutting head: Precitec Thunder - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)