Used Haco Ts 306 for sale (78)

Condition: used, functionality: fully functional, Year of construction: 2000, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Cjdpexgdlnefx Aktohd Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 400 h, table height: 770 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 750 mm, overall weight: 4,500 kg, total length: 3,640 mm, total width: 2,550 mm, total height: 1,575 mm, Equipment: CE marking, angle stop, documentation/manual, finger protection, type plate available, Very well-maintained hydraulic plate shear Haco TSX 3006 with only a few operating hours. Manufacturer: Haco Type: TSX 3006 Year of manufacture: 2018 (acquired: 2019) Operating hours: approx. 400 h Cutting length: 3,050 mm Codpo Ahq Atefx Aktjhd Sheet thickness: 6 mm Cutting angle adjustment: 0.5 - 3 degrees Clamps: 18 pieces Length of back gauge: 1,000 mm Motor power: 7.5 kW Dimensions (L x W x H): 3640 x 2550 x 1575 mm Weight: approx. 4.5 t - Control system: SC 100 T touchscreen control - Blade gap adjustment: Automatic - Rake angle adjustment: Automatic - Safety equipment: Type II finger protection with moulding, CE certified - Light curtain system and safety fences included A suitable material trolley for collecting the finished sheets is included in the scope of supply. We will gladly send you a video of the machine upon request. The machine can, of course, be inspected while powered on and thoroughly tested. The sale is to commercial businesses, excluding any warranty for defects. No guarantee, warranty, or right of return. Net price.

Condition: used, functionality: fully functional, Year of construction: 1991, machine/vehicle number: 91033420, working width: 3,050 mm, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2020, We offer this used HACO TS 3006 guillotine shear and press brake, manufactured in 1991. Manufacturer: HACO Type: TS 3006 Year of manufacture: 1991 Voltage: 380 V Capacity: 3050 x 6 Serial number: 91033420 Electric length stop Sale exclusively to businesses, with exclusion of any warranty, guarantee, return or conversion, to the extent permitted by law. The machine is sold in its current condition ("as is"). Information regarding technical data, condition, operating hours, accessories and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations and legal requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer's warranties or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). If you have any questions or require further information, please feel free to send us a message or call us. Chodpjzdzh Uofx Aktjd

Condition: good (used), Year of construction: 1990, Used plate shear from Haco Chodez Il Hgepfx Aktjd Type TS 3006 Capacity 3100 x 6 mm Adjustable back gauge and cutting angle Manually adjustable shear gap

Condition: good (used), Year of construction: 1990, Used plate shear from Haco Type TS 3006 Chjdpfx Akoz Il Idstod Capacity 3100 x 6 mm Adjustable back gauge and cutting angle Manually adjustable shear gap

Condition: used, functionality: fully functional, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, HACO 3000x6mm hydraulic guillotine shear TS-3006 Brand: HACO Model: TS-3006 Power: Three-phase 380V Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Cedpfx Aewx Ix Sjktohd Weight: 4,500 kg Motor: 7.5 kW

Condition: good (used), Year of construction: 1991, Used squaring shear from Haco Chsdpfxezhbglo Aktsd Type TS 3012 Capacity: 3050 x 12 mm Adjustable back gauge Blades recently sharpened

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Voltage: 380 V Photocells at the back Cjdpfjz Hwiqox Aktehd Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system capacity 3000 x 12 mm power 22.5 kW electric stops Chsdpjznvgmjfx Akted weight 8500 kg

Condition: used, Year of construction: 1992, gebraucht 1992 090174 Belgien 17800 € 1 3050 mm 6 mm 11 - 25 1/min 0.5 - 3 ° 18 750 mm Chodsyi Hppjpfx Aktsd 11 kW 3850 mm 1750 mm 1720 mm 4600 kg 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), Year of construction: 2001, sheet width 2050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 12 Stück Cjdoz St Rpopfx Aktjhd no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control konv. total power requirement 7.5 kW weight of the machine ca. 3800 kg. range L-W-H 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition (!!) Features - Robust, slide-guided electro-hydraulic panel shear - HACO control panelâ??front left * Easy operation directly at the cutting table * Adjustment of cutting angle and backgauge * Emergency stop button, latching - Electromotor-driven material stop/backgauge * Fine adjustment with handwheel (front left) - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front * Eccentric adjustment - 1x long side stop - Front finger guard - 1x freely movable foot switch - Rear sheet metal chute - Operating instructions

Condition: used, Year of construction: 2002, sheet width 3000 mm plate thickness 6 mm distance between columns 3200 mm speed . m/min rear stop 1000 mm total power requirement 7,5 kW The backgauge is electric. Cjdpfx Aksyqwbrjtjhd The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to sale; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Robosoft, controller model: PC90, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 14 1/min, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, back gauge: 1,000 mm, overall weight: 8,500 kg, total length: 4,100 mm, total width: 2,400 mm, total height: 2,300 mm, Maximum sheet thickness: 12mm Max. cutting length: 3100mm Strokes on full length: 7mm Strokes in short 1000 length: 14 Cutting angle: 0,5 - 3° Length backgauge: 0 - 1000mm Number of down holders: 18 Csdszvf Hrspfx Aktohd Operated mechanical or hydraulic:Hydraulic Power: 24kW Length: 4100mm Width: 2400mm Height: 2300mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987 Cedpfxezi Rl To Aktjhd

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 347 h, Very well-maintained press brake Haco SRM30150 with only 347 operating hours! Chsdpfx Akj Ahqp Sjted Manufacturer: Haco Type: SRM30150 Year of manufacture: 2018 (acquired: 2019) Time in run mode: 347 h Pump running time: 451 h Part counter: 8398 Bending length: 3,000 mm Press force: 150 t X-axis: 800 mm (back gauge) Control system: FastBend 2D Multi Touch Control with 18-inch screen Tool clamping (intermediate tension): Intermediate tension for system tools Upper tool clamping: Manual quick clamping for upper tools Support arms: 2 support arms, 750 mm on linear guide Speed control: CE-Slow (max. speed 10 mm/sec) CNC-controlled crowning table with single-V opening Upper tool 1: PS.134.30.R08 L=835 mm (4x) Upper tool 2: PS.134.30.R08 L=805 mm, split/segmented (1x) Die 1: TMR100.40.30 L=500 mm (6x) Die 2: Rolleri M.460.R L=835 mm (4x) Die 3: M.460 R L=805 mm, split/segmented (1x) And many more tools. These were additionally purchased for €20,000 net. We will gladly send you a video of the machine upon request. The machine can, of course, be inspected and thoroughly tested while powered. The sale is to business customers with exclusion of liability for defects. No guarantee, warranty, or right of return.

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 81511, control type: CNC control, bending force (max.): 225 t, overall weight: 25,000 kg, Equipment: european tool clamping system, Used HACO press brake ERMS432225, year of manufacture 2002, serial no. 81511 Chedoyml D Tepfx Aktsd

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Chodpfex Ed H Ajx Aktjd

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Chjdpsx Dr Daefx Akted Please request further details and photos. We can purchase your faulty press brake.

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Chjdpfxjx Dr U Eo Aktod

Condition: like new (used), functionality: fully functional, Year of construction: 2008, HACO ERMS 2040 (83331) Technical condition: Good Stroke length: 2100 mm Tonnage: 40T Type of press brake: Synchronized Back gauge: X-axis CNC controlled, R-axis adjustable in height (manual) Back gauge length: 800 mm Throat opening: 400 mm Overhang: 200 mm Control system: ATS 595 (CNC control, NEW) Motor power: 4.1 KW 380V Tooling: New set of upper and lower blades Tool holder: European standard Cedpfx As Ahy Scjktshd Serial number: 83331 Overall width: 3000 mm Overall height: 2250 mm Overall depth: 1800 mm Weight: 3500 kg Year of manufacture: 2008

Year of construction: 2018, condition: ready for operation (used), cutting length (max.): 3,050 mm, sheet thickness (max.): 6 mm, Hydraulic shearing machine manufactured in 2018. This HACO TSX3006 MOT features a maximum cutting length of 3050 mm and a cutting thickness capacity of 6 mm for mild steel. It includes automatic blade gap and rake angle adjustments, along with a backgauge adjustment range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the HACO TSX3006 MOT machine we have for sale. Contact us for further details. Chedpfxey Ti A Is Aktsd - Control System: SC 100 T Touchscreen control- Voltage: 380V / 50 Hz- Capacity: 3000 / 6- Backgauge Adjustment Range: 1000 mm- Sheet Support Arms: 1x 1000 mm length- Blade Gap Adjustment: Automatic- Rake Angle Adjustment: Automatic- Cutting Line Illumination: Included- Safety Equipment: Type II Finger Guard with Moulden, CE Certified- Machine Paint Finish: Light Gray and Dark Gray (No Cyan Blue)- Current Status: Delivered WITHOUT OIL FILLING

Condition: new, functionality: fully functional, Year of construction: 2026, distance between stands: 2,600 mm, oil tank capacity: 345 l, overall weight: 8,500 kg, total length: 3,770 mm, total width: 1,855 mm, total height: 240 mm, number of support arms: 2, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, safety light barrier, HACO OPTIFORM 30150 (IN STOCK) HACO OptiForm. Compact, powerful, and readily available. With over 60 years of experience in sheet metalworking, HACO introduces the new OptiForm press brake: a compact, high-quality machine built in Europe that combines premium performance with a surprisingly competitive price. Despite its compact size, the machine is built on the proven technology of the Synchromaster series. This includes the same hydraulic connections and high-quality components – a solid foundation for reliability and a long service life. Press brake features: Working length: 3100 mm / 4100 mm Capacity: 150/250 tons Distance between the uprights: 2600 mm C-frame opening: 400 mm Daylight opening: 480 mm Table height: 965 mm Rapid traverse Y-axis: 200 mm/s Press traverse Y-axis: 10 mm/s Return traverse Y-axis: 130 mm/s Motor power: 15.0 kW Total length: 3770 mm Total depth: 1855 mm Total height: 2540 mm Weight approx. 8,500 kg The machine is also equipped with: Cjdpfx Ae Ahyy Dsktohd ===== - EASYBEND CNC control - 4-axis back gauge, X-R axis travel 1000 mm - CNC-controlled crowning - Equipped with DSP lasersafe finger detection - Fast manual clamping for European Standard tools, intermediate piece height 150 mm or 100 mm - 2 Movable support arms Delivery and installation at your location are, of course, possible; delivery costs and additional costs will be discussed.

Year of construction: 1994, condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V Chjdporgbvvsfx Aktsd -Secondary: 15-220V -Technical data: see photo nameplate -Dimensions: 170/150/H180 mm -Weight: 10.6 kg

Condition: new, functionality: fully functional, New and used controllers for press brakes. For replace, spare parts and retrofitting. Cybelec Cybtouch8, Cybtouch 12, Modeva Pac 15 TP10S, E21 Estun, E22 etc. Other types on request. Cjdpfx Aksx Hkrwotohd We can buy your tired press brake for spare parts.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, overall weight: 3,000 kg, HACO ERMS 2040 (83331) Technical condition: Good Stroke length: 2100 mm Tonnage: 40T Type of press brake: Synchronous Back gauge: X-axis CNC controlled, R-axis adjustable in height (manual) Length of back gauge: 800 mm Daylight opening: 400 mm Overhang: 200 mm Control system: ATS 595 (CNC control, NEW) Chodj Adny Ujpfx Aktod Motor power: 4.1 KW 380V Tooling: New set of upper and lower blades Tooling standard: European standard Serial number: 83331 Overall width: 3000 mm Overall height: 2250 mm Overall depth: 1800 mm Weight: 3000 kg Year of manufacture: 2008