Used Kf 4000 for sale (2,978)

Condition: like new (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Manufacturer: TTK Model: FG-SYS Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Todpfxezlixqo Afgjd Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication JBUS/MODBUS connection for BMS integration Lockable metal enclosure. The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes.

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Tsdpfok Aa Uksx Afgod Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 30°-750-550 IR900 Tjdpfsk Aa Unox Afgjd RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Tedpfxok Aba Tj Afgsd Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support feet and Lateral guides on both sides optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Tedpfx Afsk Abcgjgjd Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 85° degrees (coiled 175mm rising) Incline: 175 mm / 85° = 741,2 mm / 360° Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 2001 Optionally available: Todpfx Afek Abfboged Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: SI4to, ! Bargain price! Vetter / Stahl bridge crane, crane track, hall crane, portal crane Monorail Type P300S Steel structure length approx. 4.2 x 2.6 m Outer edge of portal approx. 4.2 x 2.6 m, inner edge of portal approx. 3.7 x 1.9 m Lower edge of bridge approx. 3.8 m, hook height 3.2 m Max. overall height of the system approx. 4.6 m Lower edge of purlin / bracing approx. 3.57 / 4.2 m Runway: HEA340, supports: square tube 200 x 200 mm Girders / purlins: IPE240 / HEA340 Stahl lifting mechanism SH5025-20 4/1, year of manufacture 2001, lifting height approx. 8 m Support spacing: Runway with overhang, length approx. 6.5 m Useful load / lifting capacity 4000 kg / 4 tons Incl. power supply rail, switchgear cabinet, and floor control Connection to 400V 16A Very good condition Tjdpfx Aoktkzbsfgod Year of manufacture 2004, complete crane documentation is available Shipping by freight forwarder, collection preferred Please inquire about shipping costs based on your postal code; we will immediately provide you with a non-binding offer!

Condition: new, These units are manufactured from galvanized sheet and are designed to be fully screwed. This takes up very little space during shipment. Tjdpody Dv Defx Afgod Suction system is designed separately and specially for each booth so that the booth provides perfect suction. Thanks to the suction system, it is not possible for the personnel applying wet paint to be disturbed by the paint. In Elboy Wetline-KF Wet Paint Application Booths, environmental pollution is prevented by using accordion and cartridge or roll glass fiber filtration system. Wet paint particles vacuumed through suction fan in the air are caught by the accordion filter on the back of the booth. Wet paint particles in the trace amount which are not caught by the accordion filter are caught by the fiber filter on the back side. The door system can be fitted to the front door entrance in various ways. UV lights can be placed in the cabinet to check the painting process.

Condition: good (used), Type KF-30 In good condition Manual Motor 1,7 kW Tiltable Chain width 18 mm Made in Denmark Transport dimensions 700х700х1800 mm Tjdpedrq Svsfx Afged

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Tedpeip Uzpofx Afgjd Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Condition: new, Landert Engines 112-28-MK-FAM2, liquid-cooled engine, serial number: 89289/002, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Todpfxsi D I Eme Afgjd

Condition: new, GMN TSA 26x200 L 122526 SP: 39,300-40,000 RPM. Grinding spindle, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Tjdpfx Afei D U Uhsgjd

Condition: new, Heidenhain LID 400-0010, scale 01UML0050Z0025, serial number 7827134, part number 232206-18. Unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Tsdpfxsi Eanwe Afged

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped ⭐ Device description/scope of delivery: Fronius Tps 4000 device fully equipped - nothing more is possible! - Pulse 400 amp power source Tsdpfx Ajpgkkbsfgjd - Fk 4000 FC cooling device with the optional filter including flow control - VR 4000 with the optional rollers at the bottom + extra long connecting hose package + metal feed rollers - only the best of the best installed. - Fronius Aw5000/aw4000 hose package with Job Master function on the burner (==>Display on the torch / amps, job, feed, arc adjustable on the torch) Photo = scope of delivery. New price approx. 15,000 euros (net) we offer it for 1/3 new price. Not comparable to Transsteel scrap. Why it's better to buy from us than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have 40-60 pieces in stock. Only these Fronius devices, no other manufacturers! - We don't just push the devices through, we disassemble them, inspect wear parts, replace them and only when everything works perfectly are the devices sold. - All of our devices are sold with the popular Fronius burners. NOT a 100 euro E*b*a*y burner but QUALITY! Depending on the equipment, the Fronius burners cost between 650 euros and 900 euros net! - Our devices are “all” clean and have no burn holes in the displays or countless burn holes/dents scattered throughout the device! You are buying an item from us that is worth seeing and doesn't look completely finished! - As a customer of ours, you have the opportunity to obtain suitable spare parts and support cheaply if the worst comes to the worst. - You will receive a proper invoice from us with VAT shown. All devices can be viewed, paid for and picked up by appointment at our main warehouse in Vienna! Insured shipping on a pallet is of course possible!

Condition: used, Technical details: diameter: 300 mm width: 165 mm weight of the machine approx.: 88 kg EMAG Nr. 20012826 X0501 Merkmale: automatisches spannen Tedpfxsu Nlihs Afgsd Flanschaufnahme Ø 140 x 13mm Durchgangsbohrung 48mm Spannbolzen 3x M16x170mm Pmax: 60bar *

Condition: used, Technical details: floor-plate length: 4015 mm plate width: 2000 mm plate height: 310 mm weight of the machine ca.: 5800 kg Tsdju N Drhepfx Afgod Cast steel plates T-slots according to DIN 650 a=25; h=62; b=51; c=25mm center stand T-slots= 250mm 16 pcs. countersunk holes Ø 33 + Ø 40 mm and 6 pcs. through holes Ø 120mm i.D. *

Condition: used, Year of construction: 1988, Technical details: floor-plate length: 4000 mm plate width: 2000 mm plate height: 460 mm weight of the machine ca.: 6000 kg 2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing. * Tsdpfeu N Druex Afged

Condition: new, Year of construction: 2026, Variable, adjustable painting turntable • Numerous adjustment options for small and large, solid workpieces • Stable • Can be operated by one person; rotatable with fixed outriggers and adjustable swivel arms • Height-adjustable Technical data: Length: max. 1850 mm Tedpfxjbzmago Afged Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Top quality product Can be shipped by us via UPS. Assembly is required. Location: In stock at Bitburg warehouse.

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Tjdpfxoulaxze Afgod Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: used, mileage: 52,000 km, power: 125 kW (169.95 HP), first registration: 01/1989, fuel type: diesel, overall weight: 11,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Year of construction: 1989, Manufacturer Mercedes Model 1117 4x2 Fire truck - Feuerwehr - Bomberos - Tankspritze Year 1989 Condition Good Serial Number WDB67601215364319 Ref. nr. 927725 Reg. date: Hk: 170 Km: 52.000 Gearbox: 4-speed automatic Diesel tank: 1 Tank liter: 150L Crew cabin: ? Cabin type: Crew cabin Drum brake: ? Tire Size: 245/70R19.5 Cover% left 50% - 90% Front suspension: Springs Tjdpfxevkz Irs Afged Suspension rear: Springs Toolbox: ? Total weight: 11000 Kg Net weight: 7000 Kg Load capacity 4000 Kg Pump: Rosenbauer Pump timer: 834 Ladders: ? Light pole: ? Hose reel: R-Side + L-Side

Condition: used, The Modul KF 250 HSC bevel gear milling machine was designed as a universal machine for flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of bevel gears. Technical data: Gear diameter: 300 mm Todpfx Afoxz Eg Asgjd Max. module: 10 Tooth width: 60 mm Space required approx.: 4.2 x 2.6 x 2.2 m Machine weight approx.: 11,000 kg *The image shows the machine in its current condition as a used machine. Upon request, it can be offered partially modernised or as a complete retrofit, fully modernised with new CNC control (SIEMENS ONE).

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-700-PPV-A-KF-B; 161793 Linear actuator. Tsdpfxjturw Nj Afgod Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, pressure 3,3 bei 6bar t dayligth 250 mm Todpfx Asy Umf Asfgjd stroke 70 mm work stroke 10 mm table surface area 220x190 mm throat 150 mm weight of the machine ca. 350 kg

Condition: reconditioned (used), Year of construction: 2004, Koenig Mini Rex 4000 automatic divider with forming station - used - year of manufacture 2004 - refurbished - maximum output 4,000/h - weight range 30-135 g - electronic control Tjdpfx Afozgr Rfegsd - warranty - collection from warehouse / shipping option available - price on request

Condition: used, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 09/2015, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, loading space volume: 100 m³, Equipment: ABS, Schwarzmüller S1 Car Transporter, LBW Lifting Platform, 4000 kg lifting capacity Internal number for inquiries: 0626555 * Condition: very good * Permissible total weight: 36.00 t * First registration: 09/2015 * ABS * EBS * 3 axles, air-suspended * Disc brakes * Lift axle * Edscha canvas cover Tail lift: Dhollandia Lifting capacity up to max. 4,000 kg Length: 4,430 mm Loading area dimensions: Length: 13,600 mm * Width: 2,500 mm * Height: 2,900 mm Tires: 1st axle: 445 / 45 R 19.5, 25% air suspension 2nd axle: 445 / 45 R 19.5, 30% air suspension 3rd axle: 445 / 45 R 19.5, 35% air suspension ----Price: 13,900 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: Tsdpfx Afezh Rxwoged * We speak: German, English, French, Polish, and…? Typographical errors, errors and prior sale excepted.