Used Kf 4000 for sale (5,290)

Condition: good (used), functionality: fully functional, clamping force: 4,000 kN, injection pressure: 2,500 bar, For sale: Arburg 820S 4000-2100 injection molding machine, serial no. 195746. The machine is in good condition. Technical specifications: Clamping force: 4000 kN Tie bar spacing: 820×820 mm Platen size: 1171×1171 mm Max. mold installation height: 850 mm Max. opening stroke: 700 mm Max. platen distance: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Max. weight of movable mold half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzle Net machine weight: 22,700 kg Dimensions (L x W x H): approx. 8.0 × 2.3 m Controller: SELOGICA Machine cycles: 4,157,591 Pump: 69,800 Automatic operation: 58,556 Transport and loading can be organized throughout Europe at an additional cost if required. Prices exclusive of VAT. Inspection possible by appointment. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality, yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to contact us, please visit our website. Kjdpfx Abjxxi Nvs Usdw

Condition: excellent (used), Year of construction: 1984, Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 150 / 300 / 600Min. Maximum sheet thickness:6.0mm Horizontal troath: 675mm Vertical troath: 450mm Max. thickness Stainles:4.0mm Max. thickness Aluminium:8.0mm Motorised ram adjustment:0 - 80 Power: 4.1kW Length: 1950mm Width: 860mm Kdodpfx Absxvxwws Usw Height: 2050mm Weight: 2000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Holac Cubixx LP 120 Dicer / slicer including Holac GFA-5-4000 conveyor belt specialy made for hot products up to 90 degrees. Kdjdpfxsxwb Dce Ab Usw Year of construction 2017 very little used and low running hours!

Condition: good (used), Year of construction: 2003, For sale is a used Felder KF-700 SP panel saw and spindle moulder combination machine with a cutting length of 2400 mm. The machine is in good condition and has been inspected and refurbished by our qualified staff. Technical data: - Cutting length: 2400 mm - Cutting width: 800 mm - Cutting height: 103 mm - 3 spindle speeds - Direction of rotation switch - Height adjustable and tiltable - Extraction port Ø 120 mm - Twin motor, each 5.5 kW - Year of manufacture: 2003 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: panel saw, spindle moulder, milling machine, saw-moulder combination, combination machine Reference: R-N43TJ Kedpsxxkcwefx Ab Uedw

Condition: good (used), Year of construction: 2018, functionality: fully functional, Technical details faceplate diameter 3500 mm swing diameter 3800 mm turning height 750 mm Control Siemens 840 D sl Additional information CNC vertical lathe with one turning spindle and two tool carriers on two cross slides The machine has been regularly serviced by the manufacturer and is in mint condition. Technical specifications: Max. swing diameter 3800 mm Max. working height 750 mm Slide travel X1 axis approx. 2800 mm Slide travel X2 axis approx. 3200 mm Slide travel Z axis 1000 mm Rapid traverse X/Z axis 32/20 m/min. Faceplate (turning spindle unit with motor spindle): Speed 100 rpm Torque 67,000 Nm at 40% duty cycle Drive power 200 kW at 100% duty cycle Load capacity (chuck, clamping jaws, and workpiece) 35,000 kg Tool carrier: Double tool holder, Capto C8 For internal and external machining Speed range up to 6000 rpm. Kjdpfx Aoxqn Nrob Uodw Torque approx. 120 Nm at 100% duty cycle Direct coolant supply to the tool holders Double tool holder with swivel axis For turning and drilling (MFU) in conjunction with a tool magazine Equipment: CNC control Siemens 840 D sl Chuck Röhm lever chuck KFG 3500/3/6/12 25-station tool magazine, left of the work area 41-station tool magazine, right of the work area Max. tool diameter 150 mm Max. tool weight 20 kg Tool length 400 mm Tool cleaning with air Chip conveyor Coolant system 6 bar, 80 l/min. Knoll paper belt filter High-pressure coolant pump 70 bar

Condition: good (used), Year of construction: 2007, Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667 Technical parameters:- Designation: KNC/H 1500/65- Maximum temperature: 650 °C- Recommended operating temperature range: 300°C – 600°C- External dimensions approx. (wxhxd): 2800x3200*x2100mm * height including structure for door when hydraulically opening- Internal dimensions (wxhxd): 1500 x 1000 x 1000 mm- Number of heating zones: 1- Maximum batch weight: 1000 kg- Melting power: 48 kW- Furnace weight: 1300 approx. kg- Voltage: 3/PEN 400/230V AC 50 Hz- The damper is part of the furnace, serves for automatic temperature control in the furnace and is controlled by the program from the controller. - includes technical documentation in Slovak - protocol of measurement and optimization of the temperature field to meet the DIN 17052-1 standard ΔT10°C in the internal working space (in an empty furnace at Tmax) Kdjdpfx Absvtm Szj Uew \- Technical documentation is in SJ. Manufacturer: LAC, s.r.o., Czech Republic Year of Production: 2021 This is an electric furnace, the heating system of which consists of heating resistance elements located near the fan unit. Through the heating branches, the fan ensures circulation of the atmosphere in the heating space and thus heating of the working atmosphere and the charge in the furnace. The working chamber of the furnace is equipped with a separately regulated heating unit in the rear wall of the furnace. The furnace is equipped with a radial circulation fan with a horizontal shaft to ensure uniform temperature distribution throughout the working space of the furnace. The circulation fan drives the heated air through the circulation channels of the circulation insert. All rotating parts are located under a cover against accidental contact. The temperature profile of the device is controlled by a PID programmable INDUSTRY controller. This controller allows the creation of up to 30 heat treatment programs depending on the needs of the processing technology and the properties of the processed batch. Dimensions see. appendix.

Condition: used, Year of construction: 2020, controller model: , _____ Description: Year of manuf. : 2020 Technical specifications Working surface:2000 mm x 15000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m'/h (gas flow control) :-ALFA machine cutting torch (internal ignition) Kdodpfx Aboxw A Ics Usw :-Smartlifter 300 :-SensoMat ARKI :-Full addressing of gases :-Light barriers :-Safety device for wheel housing (foot switch)

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 3755 mm Measurements depth 2300 mm Measurements height 2610 mm Machine weight 9600 kg Main Drive Spindle speed range 14000 rpm Ksdpfoxya Dgex Ab Uodw Tool taper 7/24 Taper No. 40 Number of axis 4 Movement X-Axis Movement 560 mm X-Axis Rapid Traverse 50000 mm/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 50000 mm/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 50000 mm/min Table Outer length 400 mm Outer width 400 mm Table load 400 kg This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2006 and features a horizontal machining centre with only 1,300 hours on the main spindle, which was overhauled in April 2022. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI NH 4000 DCG machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Kdodpfx Abed Ab Uuo Usw Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 18089754, laser type: fiber laser, Description: High-performance fiber laser from IPG Laser GmbH, manufactured in Germany. The laser is designed for industrial applications such as cutting, welding, or surface processing and is distinguished by high efficiency, stable beam quality, and robust construction. Technical data: Manufacturer: IPG Laser GmbH, Burbach, Germany Model: YLS-4000-S2T Serial number: 18089754 Year of manufacture: September 2018 Rated voltage: 400–460 V AC, 3 phases + PE Frequency: 50 / 60 Hz Kdjdpfx Abjxv Dp Ss Usw Full load current: 29.3 A Circuit protection: 32 A / 120 kA CE marking: present

Condition: good (used), functionality: fully functional, travel distance X-axis: 4,230 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, table width: 2,400 mm, table length: 4,000 mm, table load: 14,000 kg, overall weight: 38,500 kg, spindle speed (min.): 5,200 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 4,230 mm Y-axis travel: 2,700 mm Z-axis travel: 700 mm X-axis feed rate: 12 m/min Y-axis feed rate: 12 m/min Z-axis feed rate: 12 m/min Table length: 4,000 mm Table width: 2,400 mm Spindle speed (min.): 5,200 rpm X-axis rapid traverse: 12 m/min Y-axis rapid traverse: 12 m/min Z-axis rapid traverse: 12 m/min Distance between the stands: 2,800 mm Table load: 14,000 kg Milling head position: Vertical Workpiece weight (max.): 14,000 kg Kdsdpfx Aovt S Easb Usw Total weight: 38,500 kg Equipment: - Speed continuously adjustable - Chip conveyor - Internal coolant supply - Tool magazine 40 tools - Tool holder SK 50 - Heidenhain TNC 530 control

Year of construction: 2008, condition: used, Used van Aarsen Multi - Mix PMM 4000L batch mixer stainless steel Kodow Ibnqspfx Ab Uedw 75kW drive

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: Global ControlS, _____ Description: Year of manuf. : 2020 technical data Kdjdjxv Nk Uopfx Ab Usw Working area:3000 mm x 6000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m3/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-SmartLifter 200 :-SensoMat ARKI :-Full gas addressing :-Light barriers :-Wheel housing safety device (foot switch)

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand SIEMENS Model 840D sl Operate with CELOS® Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 660 mm Media Chip conveyor Yes Additional Equipment Tool breakage control system in the tool magazine Two pallets with threaded holes Automatic turning APC with 2 stations Direct distance measuring system Rotating viewing window in the work area door Coolant rinsing gun I/F for oil mist separator Knoll KF110/700 compact filter system Spindle sensor measuring system with optical signal transmission / Cooling unit for spindle Signal light (red, yellow, green, blue) This 4-axis DMG MORI NHX 4000 was manufactured in 2017. A robust horizontal machining center, it features a travel range of 560x560x660 mm and a clamping surface of 400x400 mm. The spindle was completely overhauled in May 2023. It has a tool magazine with 60 slots. The tool Holder is HSK 63 HSK-A63 motor spindle and the spindle speed range is 20 - 20,000 min-1. The machine includes a CELOS® control system with Siemens 840D sl Operate, enhancing usability with a multi-touch screen. For more information about this horizontal machining center, please reach out to us. Kdodpfx Absxwz Afe Uew Application Types Milling

Condition: ready for operation (used), Vibrating Chute Hazemag 4000-1400 Brand: Hazemag Dim. Vibrating Chute: Length 4000 mm – width 1400 mm. Driving: 2 pieces vibration motors of each 5,6 kW. Incl.: springs. Kdodonac Niepfx Ab Usw

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 22070ULS, total height: 2,500 mm, total length: 2,500 mm, overall weight: 850 kg, input voltage: 400 V, compressed air connection: 6 bar, pressure: 6 bar, Equipment: documentation/manual, Scaligera Ulisse 4000 Sleeve Machine 2023, as good as new The Scaligera Ulisse 4000 is an automatic sleeve applicator for applying shrink sleeves to bottles and packaging. The machine places pre-formed sleeves over products, after which they are guided through a shrink tunnel for the final shrinking process. Kdjdpoxw Uznsfx Ab Uew Key features: - Suitable for various product sizes (bottles, jars, tubes) - Automatic product feeding and sleeve application - Adjustable capacity depending on the type of product - Mechanical format adjustment for different product dimensions - Integrated shrink tunnel with temperature control Operating principle: Products are supplied via the conveyor belt, after which the machine automatically applies a sleeve over each product. The product then passes through the heating tunnel, where the sleeve shrinks under heat and conforms to the shape of the product. Shrink tunnel: The corresponding shrink tunnel is an essential part of the system and ensures the final shrinking process. The tunnel is equipped with: - Adjustable temperature zones for optimal shrinking results - Hot air circulation for even heat distribution - Adjustable belt speed for different sleeve materials (PVC, PET, OPS) - Heating elements with digital temperature control - Variable tunnel length depending on the configuration The shrink tunnel can be adjusted for various sleeve materials and product shapes, with precise temperature and dwell time settings to achieve a perfect shrink result without damaging the product. Applications: Ideal for cosmetics, food, pharmaceutical products, and other packaging where a 360° sleeve label is desired. This description is for informational purposes only. No rights can be derived from this information.

Year of construction: 2014, condition: good (used), EKRA Stencil Printer Serio 4000 Year of manufacture: 2014 Print format: min. 80x50 mm, max. 510x510 mm Substrate thickness: 0.2 to 6 mm Stencil size: min. 450x450 mm, max. 800x900 mm Repeat accuracy: +/-12.5 µm IQUESS steel squeegee 2 1/2 D inspection Adjustable transport width iPAG jet dispenser (with heating) Solder paste dispenser for cup diameter 53 mm, 57 mm, and 64 mm Paste level control Kdedpjxxk Elefx Ab Uow EKRA Material Storage System S10 Select Year of manufacture: 2018 Consumables such as solder paste and adhesives can be stored according to product requirements and production options Traceability Temperature control (4-12°C) 8 shelves Material dispensing via lift system Handheld scanner

Condition: used, Pair of cast iron angle plates Kdodsxx Truspfx Ab Usw Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Condition: used, functionality: fully functional, Year of construction: 2013, machine/vehicle number: 30131003, Laserline LDF 400–4000 – Diode Laser Description: Industrial high-power diode laser from Laserline GmbH, Mülheim-Kärlich (Germany). This laser is ideally suited for applications in welding, hardening, coating, and other material processing operations. Kodpfexuiyyjx Ab Uodw Robust design, precise control, and reliable continuous output. Technical Data: Manufacturer: Laserline GmbH, Germany Model: LDF 400–4000 Year of manufacture: 05 / 2013 Laser power: 4,400 W (cw) Wavelength (laser): 940 – 1,060 nm ± 10 nm Wavelength (pilot laser): 650 nm Max. power consumption: 11.8 kW Power supply: 380 – 480 V ± 10 %, 3 phases Mains frequency: 50 / 60 Hz Serial number: 30131003 CE marking: Present Condition: Used, fully functional

Year of construction: 2023, condition: used, length 4000 mm width 400 mm Total power requirement 1,5 kW weight of the machine ca. 450 t Kedpfx Aow Nblleb Usdw

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, total width: 3,700 mm, total length: 1,235 mm, total height: 1,550 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 10/2026, electrical fuse: 16 A, year of last overhaul: 2025, opening width: 45 mm, Rondostar 4000 Dough Sheeter Dough Sheeter Rondo Model: SFI 660 Computer control / touch panel Suitable for sheeting and laminating all types of dough With right-side dough winder Stainless steel design with base frame Adjustable rolling thickness from 0.2 to 45 mm Electric flour duster Mobile machine Power supply: 400V, 16A-CEE plug Dimensions: 3700 x 1235 mm (W x D) Used machine, cleaned With warranty & spare parts service Quality from a specialist workshop! Benefit from over 35 years of experience! Options: - Maintenance contract - Service package - Delivery service - E-Box for enhanced safety - Training & commissioning Kjdsw U Iwljpfx Ab Uodw Visit our large showroom!

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, Kjdpoxp Hhdofx Ab Ujdw swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.

Condition: used, Year of construction: 1996, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Year: 1996 Bed-dimensions: 4500x800mm X-travel: 4000mm Kdjdpfswnhnfjx Ab Uow Y-travel: 935mm Z-travel: 1000mm Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 11676-FBZ - Number of axes: 3 - Travel X [mm]: 4000 - Travel Y [mm]: 935 - Travel Z [mm]: 1000 - Spindle speed max. [rpm]: 3000 - Tool holder: ISO50 - Table size length [mm]: 4500 - Table size width [mm]: 800 - Control type: Heidenhain - Control: CNC - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 2011, machine/vehicle number: 30111023, Laserline LDF 4000-40 – Diode Laser Kdjdpfjxuiwfox Ab Usw Description: High-performance diode laser from Laserline GmbH, based in Mülheim-Kärlich (Germany). This unit is ideally suited for industrial applications such as welding, hardening, or coating. Robust construction, reliable performance, and compact design. Technical data: Manufacturer: Laserline GmbH Model: LDF 4000-40 Year of manufacture: 02 / 2011 Laser output: 4,400 W (cw) Wavelength: 900 – 1,030 nm ± 10 nm Max. power consumption: 16 kW Mains voltage: 400 – 480 V ± 10 % Frequency: 3-phase, 50 – 60 Hz Serial number: 30111023 CE marking: present Condition: Used, fully functional

Condition: used, functionality: fully functional, Year of construction: 2011, machine/vehicle number: 30111013, Laserline LDF 4000-40 – Diode Laser Description: Kdjdpfjxuiu Dox Ab Usw High-performance diode laser from Laserline GmbH, based in Mülheim-Kärlich, Germany. This unit is ideally suited for industrial applications such as welding, hardening, or coating. Robust design, reliable performance, and a compact footprint. Technical data: Manufacturer: Laserline GmbH Model: LDF 4000-40 Year of manufacture: 02 / 2011 Laser power: 4,400 W (cw) Wavelength: 900 – 1,030 nm ± 10 nm Max. power consumption: 16 kW Supply voltage: 400 – 480 V ± 10 % Frequency: 3 phases, 50 – 60 Hz Serial number: 30111013 CE marking: present Condition: Used, fully functional