Used Kolbus for sale (92)

Condition: used, Year of construction: 2023, KOLBUS Casemaker DA 370 year 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game bobards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps - device for small format Itodpfx Aev Nn Ntjhyob - device fo large format - Remote Service Gateway Technical specifications: mechanical speed: up to 65 cycles/min open cover size max.: 205 x 670 mm joint width: 4 - 15 mm spine width: 14 - 120 mm turn in width open: up to 19 mm cloth width: 223 - 708 mm cloth height: 158 - 428 mm board thickness: 1 - 4 mm board width: 95 - 328 mm board height: 140 - 390 mm board centre strip thickness: 1 - 4 mm board centre strip width: 6 - 90 mm centre strip roll thickness: 0,3 - 0,6 mm centre strip roll width: 6 - 90 mm lining width: 195 - 670 mm lining height: 130 - 390 mm

Condition: used, Year of construction: 2005, KOLBUS High Capacity Three Knife Trimmer HD 150.B year 2005 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Standard equipment: - right hand infeed - standard cutting tables (no. 7 - 18) - knife setting gauge - cut counter Special equipment: - 2 sets of knives Technical specifications: mechanical speed: up to 6.000 cuts/h feeding speed: up to 12.000 single products/h, thicker than 5 mm size range untrimmed max.: 310 x 400 x 80 mm Itjdsvga E Iepfx Ahysb size range trimmed max.: 300 x 388 x 80 mm size range trimmed min.: 100 x 120 x 2 mm stack height max.: 80 mm

Condition: used, Year of construction: 2008, machine/vehicle number: 608, Format: max 310 x 400 x 80 mm, min 100 x 120 x 2 mm Itsdpfox I D Emsx Ahysb Performance: max 3,600 cycles/h Equipment: • Automatic magazine feed with integrated counting stacker • Copilot system • 1 set of cutting tables • Knife change device • Central lubrication

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station Iodpfex Ary Eex Ahystb - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 2008, Ref: 11035 . 2008 Kolbus KM470 EVA/PUR Ratiobinder Line Space saving perfect binding line with front cut device & gauzing. Comprising: (2008) Meccanotecnica ‘Fido’ Book block feeder 20 station ZU804 gatherer for folded sections and single sheets with hand feed station Becker ‘Air Centre’ vacuum & compressed air supply for gatherer ZA 800 downstream reject device & delivery belt & can be used for separate gathering Extended raceway/transfer with vibrate unit Itsdpfx Aexyin Ishyeb Open section for feeding book blocks Ratiobinder KM470 with 21 clamps TFT visualizing monitors with graphic operator guidance. Cutting, micro-notch & brushing units (in-house extraction) EVA & PUR spine gluing system, comprising; Kolbus LH375.B EVA hot-melt pre-melt unit EVA hot-melt roller type spine gluing unit on mobile base EVA hot-melt roller side-gluing device Nordson ‘Durapail’ PUR pre’melter Nordson PUR spine gluing Gauzing unit I.R. heating in radius for increased glue open time Pile cover feeder with spine pressing & side nipping units Downhill delivery to lay-down device to; Raised TS.E flat conveyor (details on request) system to; XFA660 spiral tower to; TSZ 'Intermediate' escape delivery to; (2007) CERMI XCR 650 Front cutting device Kolbus HD150.B Pile trimmer Kolbus XTP 130 Book stacker (2006) Hugo Beck Shrink wrap tunnel Roller belt delivery. Including spares, tools & manuals. N.B. Compressed air supply required (NOT included). Specification: Book size, Max: 383 x 320 mm Max: 460 x 190 mm Min: 105 x 100 mm Book thickness : 3 -- 60 mm Mechanical speed, Max: 6,000 cycles/hr.

Condition: excellent (used), Year of construction: 2017, Ref: 11033 . 2017 Kolbus ZU 805 Gathering Machine Standalone gathering machine with signature recognition & stacker Can be used for both small and large print runs with signature separation in non-stop mode Equipped with: Hand feed station 24 automatic rotary feeders with suction and double gripper action Electro-mechanical double sheet and mis-feed detection Signature recognition cameras Thickness detector Becker air centre Siemens touch screen control Kolbus AS 805 stacking delivery Complete with manuals Specification: Signature size, Max: 460 x 310 mm Min: 125 x 100 mm Iedpfx Ahsxyinheyjtb Block thickness, Max: 90 mm Mechanical speed, Max: 5,000 cycles/hr.

Condition: excellent (used), Year of construction: 1984, Ref:11030 . 1984 Kolbus KS Cloth Cutter For slitting & cross cutting of various materials including calico, linen, gauze, PVC, etc. Itodpfxoxyim Re Ahyjb Equipped with: Double friction rewinder Extended delivery table Specification: Max. width of material: 1400 mm

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable Itsdjx Ahl Dspfx Ahyob - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: excellent (used), Year of construction: 2019, Kolbus AutoBox AB Iodpex El N Iofx Ahyotb year 2019 machine for box production easy operation servo controlled quick job change suitable for corrugated boxes enables box-on-demand production MC MultiCut Module PR module many box types (FEFCO) scoring, cross and linear cutting, slitting incl. several equipment (glue, new knives) delivery section ready for use good condition available immediately

Condition: excellent (used), Year of construction: 2012, Ref:11025 . 2012 Kolbus DA-270 Casemaker For high-speed production of hard book covers, Lever Arch files and games boards. Comprising: ‘Co-pilot’ system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board magazine feeders - manual loading Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Iodoxx Uyyopfx Ahyotb Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals. N.B. Compressed air and water supplies to client’s account. Accessories: 2017 Kolbus ECK 100 Corner cutter Specification: Size of opened case, Max: 670 x 390 mm Min : 205 x 140 mm Centre strip width : 6 - 90 mm, thickness 1 – 4 mm Joint width : 4 - 15 mm Turn-in width, closed : 8 – 15 mm Output, variable : up to 65 cycles/min Floor space : L: 6700 x W: 3000 x H: 2,200 mm Electrical loading : 15 kW (3ph, 400V, 50 Hz) Air requirement : 33 Nm3/h 6 bar.

Condition: used, Year of construction: 1976, machine/vehicle number: 193, For sale: Kolbus PE machine – automatic stamping/foil blocking machine. The machine is designed for embossing hardcover PU materials used in diaries, notebooks, and books. It operates in an automatic cycle: cover feeding, positioning, embossing, and removal. The machine is equipped with a system that allows stopping in the upper position, enabling blind (dry) embossing with material discoloration. Year of manufacture: 1976, rebuilt in 2012. The machine is connected and operational; testing is possible. Actual working speed for blind embossing – 18 units per minute. Includes many additional components – suction cups, markers, etc. The sample video does not depict the machine for sale. Itsdpfox Rcgnox Ahysb

Condition: used, Year of construction: 2004, Cloth cutter Kolbus: KS Year: 2004 Itodpfxsxy Rfbo Ahyjb Description: -Unwinder -Circular knives: 10 -Rewind for waste material: 1 -Delivery table Material width: max. 1.400 mm.

Condition: ready for operation (used), Year of construction: 2006, Built in 2006 Size max 320 x 510 x 70 mm Speed max 15.000 c/h Gatherer 18 stacions ZU 841 - Optical sheet control: SignalLynx - ATC thikness control 1 Reject AS 841 Perfectbinder - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Base for 1st spine glue system Itjdox Np Szspfx Ahyob - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Stream cover feeder: SAL 411.C - Scoring station max: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE - Transport system, length (approx) 50 meters - Conveyor tower Ambaflex - Reject unit Three knife trimmer Kolbus HD 152P - counter: 14,367 mio—only!!! - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Stacker - Rima Stacker 3310 ( Kolbus XRS 130) - Rima Statik device 110

Condition: used, Year of construction: 2008, Manufacturer: Kolbus / Cermi • Model: XCR 650 • Machine Type: Front-Cut / Front Cutting Unit for Flap and Brochure Production • Application Area: Print Finishing / Book and Brochure Manufacturing • Function: – Gathering channel with feed and alignment of brochures – Opening of inserted flaps – Front-Cut: Precise front cut for processing flap brochures – Automatic feeding and stacking of finished products • Fields of Application: – Processing of flap brochures and similar print products – Inline integration into finishing or binding lines – Can also be used as a stand-alone machine Itodpfox Hxq Isx Ahyeb • Format Range (typical): – Max. trimmed size approx. 480 × 350 × 50 mm – Min. trimmed size approx. 125 × 100 × 3 mm – Max. untrimmed size approx. 480 × 375 × 50 mm – Min. untrimmed size approx. 125 × 105 × 3 mm • Performance: – Mechanical output depending on settings up to approx. 6,000 cycles/h (single cut) – Throughput mode up to approx. 8,000 cycles/h possible :contentReference[oaicite:1]{index=1} • Special Features: – Precise front cut for demanding brochure formats – Suitable for inline production lines – Robust, industrial-grade design • Typical Industries: Print finishing, bookbinding, printing houses

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kolbus NM + PK + SW Offered as a bundle Machines are available for demonstration (The Hörauf laminating machine shown in the video is not included in this offer) Iodpfswxvfgsx Ahyetb

Year of construction: 2023, condition: used, Case maker Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game boards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps - device for small format - device for large format - Remote Service Gateway Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm Itjdev N Ep Dspfx Ahyjb - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The system consists of the following components: Perfect Binder KM 410.C – 24 clamps Gathering Machine ZU 840.B 2 cutting stations Robatech premelters XRT 951 and 950 / ICS 160 Itodoxvyhdepfx Ahysb Transport and cooling belt AK-6365-02 Three-knife trimmer HD 151.P Müller Martini stacker Note: 6 trucks are required for transport.

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station Itedjxuad Aspfx Ahyeb - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Transport Band z.B. für Klebebinder / Transport Belt for example for Perfect Binder Kolbus FS.L 683 Transport Band / Transport Belt Kolbus FS.L 683 Baujahr / Year 1988 - SN. 737 mit Eigensteuerung / with SelfControl Geschwindigkeit regulierbar / Speed ​​adjustable Höhenverstellbar / Height adjustable Bandlänge / Band length 150cm, Bandbreite / Band width 38cm Bandhöhe / Band high 90cm Isdpfx Asxvcntohyotb Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2000, Board cutter Kolbus PK 170 Year: 2000 For cutting board sheets into finished cut-to-size blanks in 2 operating processes. Description: - Hand feeding Itjdpfxjxp Np Ro Ahyjb - Magazin for second cut (strips) - Circular knives, 8 - Belt delivery - Waste removal conveyor

Condition: ready for operation (used), Year of construction: 1993, Machine number 135 Built in 1993 Size max 510 x 290 x 65 mm Itsdpoxykdqjfx Ahyob min 125 x 100 x 3 mm Book block thickness max 65 mm min 3 mm Speed max 10.000 c/h Equipment: • 24 stations gather • book bloc feeder • endsheet tipping unit • 32 Clamps • milling and roughening station • hotmelt spine glue station • hotmelt side glue station • cold spine glue station • Kolbus HL Premelter • Nordson Premelter • Nordson Premelter • Slauterback Premelter • stream Cover Feeder • 2 pressing stations • laydown delivery • Cooling Tower • Kolbus Transport Conveyor w/ All Associated Conveyors • Controls • Large Assortment of Spare Parts

Year of construction: 1996, condition: used, Co-pilot, starfeeder, rounding & backing, gluing, gauzing, book mark suction device, gluing, head & tail banding, pressing, casing-in, case prestacking, case bending, case forming, Kolbus FE 603, Kolbus DS 391 Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Hard cover book line Kolbus BF 525 + FE 603 Year: 1996 - 2002 Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 603 Year: 2000 Description: - Pressing station - Right hand infeed - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Max. mechanical speed: 50 cycles/min Itodpfx Asvw Al Eehyjb -: - Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Iedpfxjxg Nzhe Ahyotb Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Turning device - Stacking robot - Air table - Pallet dispenser - Slip sheet feeder - Pallet delivery station Technical specifications: - Infeed speed: up to 30 piles/min - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: used, Year of construction: 1982, Kolbus DA 780 Automatic case maker with hard cover Production speed: ~25–35 cycles per minute Case size range: Approx. 140 × 200 mm – 670 × 390 mm Board thickness: 1–4 mm Ijdpfxexz D Nce Ahystb Spine width: 6–80 mm (adjustable) Cover material: Paper, cloth, or coated materials suitable for cold glue Glue type: Cold (dispersion) glue; hot-melt optional retrofit Drive power: ~3–5 kW Machine weight: ~2.5 – 3 tons

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 Ijdpfx Ahjv N U U Neyjtb - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated