Komatsu fd 25 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6

Diesel Forklift MITSUBISHI FD 25 T

Düsseldorf Germany
6383 km
1992
used
Offer
Another 15 days
loading capacity: 2,5 t overall height: 2600 m condition: ungeprüft running hours: 3.213 h Dimensions (l x w x h) approx.: 2500 x 1200 x 2600 mm Weight approx.: 4000 kg Description: MITSUBISHI FD 25 T Diesel Forklift Ptmynu - serial number: F18A60050 - engine: diesel - lot of tyres: 4 x SE 80 percent - third valve - sideshift - windscreen with wiper - lighting - new starter - oil change with filter - new air filter - forklift dimensions without forks: 2500 x 1200 x 2600 mm - for fur... more
6
Vehicle data - make: Mitsubishi - type: FD25N - drive type: diesel - carrying capacity: 2500 kg - load Centre of gravity: 500 - lifting height: 4710 mm - range: 0 mm - year: 2011 - operating hours: 3324 - internal No.: D3522 _ _____ Mast data - mast type: triplex - lifting height: 4710 mm - height: 2150 mm - free lift: 1050 mm - carriage: 0 mm - forks: 1150 x 125 x 40 mm _ Dimensions - length: 2500 mm - width: 1150 mm - height: 2150 mm - weight: 4075 kg _ Cbnnbz9a Battery & charger -... more
4
Gear motor, electric motor Speed 17 U/min 2hebvkfaq Power 0,25 kW Type B14 Diameter shaft Ø 24 mm Protection type IP44 Dimensions 480/175/H195 mm Weight 20 kg more
3
Vehicle data - make: Toyota - type: 02-8FDF25 - drive type: diesel - carrying capacity: 2500 kg - load Centre of gravity:-lifting height: 3500 mm - range: 0 mm - year: 2013 - operating hours: 0 - internal No.: 002535001 _ _____ Mast data - mast type: standard - height: 3500 mm - height: 2260 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2260 mm - weight: 4350 kg _ Battery & charger - battery voltage: 0 V - battery AH: 0 A... more
6
IntNr.: 6001 * Device details: * Load capacity: 2500 kg Lifting height: 3980 mm Mast type: Standard mast height: 2580 mm Length/width/height: 2460 / 1150 / 2060 mm Operating weight: 4150 kg * Equipment: * * Protection umbrella * 3rd valve * Working lights front On request we take care of transport to you. Another 250-300 forklifts, attachments and sweepers for you available immediately. Also for rent! We like to buy their old. Special action hand pallet truck PRAMAC G... more
6
anufacturer: DMG Model: DMU 125 FD Year of construction: 2007 Control System: Siemens 840 D Movement X,Y,Z [mm]: 1.250, 1.000, 1.000 Spindle speed: 10.000 rpm Spindle: Technologie: Direct drive Speed: 10.000 rpm Power ca.: 38 kW Torque ca.: 288 Nm Taper: HSK 100 Mill/Turn table: C-Axis: 0,001° Clamping surface: Ø 1.100 mm Load capacity max.: 1.500 kg Speed max.: 500 U/min Torque: 5.700 Nm Holding troque: 6.400 Nm Bbg2qdoapv Milling head: Technologie: Universal head B-Axis: 0,001° Positions: ... more
6
Bbdqtde238The forklift is in a good condition. For questions please call us. We can organize the export. Seriennr.: 30180 Hubhoehe: 4 m Eigengewicht: 9048kg Tragkraft: 6000kg Baujahr: 1982 more
4
Rexroth MNR: R005525416 FD: 886 linear actuator, travel 840 mm, used, low wear, 100% functional, included with com. photos Hlpt0fef more
4
Tool holder, milling, milling tool Recording SK50 Test punch 50 x 125 mm 3tejo2pjz -1 x recordings available Award pieces Weight 4,6 kg / piece more


komatsu fd...
every day

New machines via email!

Be informed!
4
Manufacturer article no.: [...] Machining: milling / drilling Cone: HSK 63 A UPM: 18000 7elslljxs Rotary feedthrough: Yes Lubrication: Grease Internal cooling: Yes more
6
diameter 315 mm weight of the machine ca. 60 kg Max. Speed RPM 4200 rpm F max. 8000 daN Bf8qz0sl Sigma S max. Chuck of brand: RÖHM / GERMANY Type: KFD-HS 315/3 Id. 427257-N0313 Spezifikation: Fmax. 8000 daN n max. 4200 U/min more
6
Technical data Maximum barrel diameter Ø1000 mm Max Achslänge2700 mm Arbeitsdruck... more
6
Dumper Make: Komatsu Model: HD325-6 Construction year: 2003 Hours: 30.171 h Mileage: 178.048 km Serial number: 6166 Weight : 29300 kg Power: 364 kW See technical specifications sheet for more information Bbg8d2inmo more
3
Tool holder, milling, milling tool 07gxw7clz Recording SK40 Test punch 50 x 125 mm -1 x recordings available Award pieces Weight 2,6 kg / piece more
6
IntNr.: 5081 * Device details: * Load capacity: 4000 kg Lifting height: 3200 mm Mast type: Duplex mast height: 2200 mm Length/width/height: 2950 / 1340 / 2120 mm Operating weight: 5860 kg * Equipment: * * Protection umbrella * 3rd valve * Attachments: * * Load backrest 9pg0b8zyv New hydraulic pump Large maintenance done All filters and oils new New seat On request we take care of transport to you. Another 250-300 forklifts, attachments and sweepers for you available im... more
4
Dietz Motors FDR 132 M / 4q motor with FD 71/25/4q, serial number according to the photo, hole distance of the fixing holes: 185 x 185 mm, Ø drive shaft: 38 mm, used, normal wear, 100% functional, included with com. photos attention: cost of packaging and shipping Please separately request! ATTENTION: Please enquire for charges for packing and transport separately! 8xqu3hp3w more
6
diameter 315 mm Yqs78s weight of the machine ca. 60 kg Max. Speed RPM 4200 rpm F max. 8000 daN Sigma S max. Chuck of brand: RÖHM / GERMANY Type: KFD-HS 315/3 Id. 427257-00205 Spezifikation: Fmax. 8000 daN n max. 4200 U/min more
6

Diesel frontal forklift MITSUBISHI FD25K

Düsseldorf Germany
6383 km
2003
used
Offer
Another 3 days
Dimensions (l x w x h) approx.: 1140 x 2550 x 2755 mm Weight approx.: 2500 kg Description: Lifting height: 4 450 mm, Lifting capacity: 2 500 kg, Hours: 6 086 h, Mast type: Duplex, Sideshift, 3 way hydraulic, Load backrest, Type of tire: Solid, Number of wheels: 4, Cabin height: 2130 mm, Fork Length: 1200 mm, Type / fork carriage width: II/1000mm, Height with mast raised: 5500 mm, Please note that the delivery term 'loaded on truck' is only valid for the machines as shown at the pictures and a su... more
2
Mobile welding fume extraction Fabr. EUROMATE type MFD Built in 1999 Technical data: Filter surface 50 m2 Filter performance up to 99.8% Dust nozzle dia. 200 mm DRM. Extraction capacity 1250 m3/h Engine speed 2800 RPM DBA noise level 69 Mtxi7 Power 0.75 kW Sizes 1210 x 810 x 900 mm with: -Filter clogging indicator -Mobile -CE mark -5 m mains lead -Extraction arm used, in very good condition € 800 Since the MFD unit with a paper filter is fitted, it is suitable for suction ... more
4
Three-phase motor, electric motor Power 0,25 KW Speed 1420 RPM Shaft ø 14 mm Type B14 (FlanschØ 120 mm) Protection type IP44 Dimensions 230/120/H145 mm Weight 7 kg 89tlvol3z more
4
- Voltage: 400 V / 50 Hz - Control voltage: 24 V Balstjawsw - Siemens Simatic S7 controls As seen, ex works Iserlohn Germany more
4
Dietz Motors FDR 132 M / 4q motor with FD 71/25/4q, serial number according to the photo, hole distance of the fixing holes: 185 x 185 mm, Ø drive shaft: 38 mm, used, normal wear, 100% functional, included with com. photos attention: cost of packaging and shipping Please separately request! ATTENTION: Please enquire for charges for packing and transport separately! 8xquswkiv more
4
Forks: 1500 mm Carriage: 1100 mm Height: 2230 mm Lifting height: 4700 mm 99mxejwkp Drive type: Diesel Load capacity: 2500 kg Free lift: 1680 mm Mast type: triplex Note: double auxiliary hydraulics, int. Zinkenverstellger? t with Sideshift elm Kargelund IGGS 2500, load backrest: 1200 mm? ber floor, steel frame + front, roof, and rear window including PVC side panel right + left, without heating, pneumatic tyres, front: 7.00 R12, rear: 6.00 R9, 1 x R? ckfahrscheinwerfer back, Lighting sys... more
6
Baler BOA FD 25 LB: Completely overhauled in 2013 1x 18.5 kW Pressdruk: 280 bar pressure force: 28 ton Bale size: length 120 cm, width 110 cm, height 80 cm Number of wires: 4 bale weight: 400/600 Kg Dependent upon Material capacity: Up to 5 tons / hour Iehbmor more
6
1 x chef type Sadaf-A - second-hand machine Saw. - drilling - milling,- and dowel inserting machine machine no. 9106/4362 Built in 1991 Workpiece dimensions 220 - 3000 mm width 40-160 mm with cutting length Width 40-210 mm without milling Height 12-40 mm machine design double-sided automatically working the fixed side of the machine is seen in transport direction right and not versellbar NC-axis for the positioning of the Glas. Side of the machine (X) Return transport Workpiece retur... more
3
Electric motor manufacturer -Asynchronmotor Breuer - Motoren GmbH Type AFD 250 M 423 400 Volt power 216KW 346A speed nN 150 - nmax 2000U / min JL 2.0kg / m 2 Weight 950kg Motor ready to use Gxruugt more
3
M7tb7Capacity: 32 KW Voltage: 380V/400V/50Hz Control voltage: 230/24/12V As seen, exw Iserlohn Germany more
1
Lifting height: 5500 mm Drive type: Diesel Vmsrwoc0g Load capacity: 2500 kg Mast type: triplex Note: top unit in Super condition. Stone bracket adjustable width from 520 to 1650 mm with Sideshift, PVC cab with windshield and wiper. New accident prevention regulations, new CE, may be sold with warranty. Transport can we organiersieren. We are a specialist workshop with 20 years of experience in the area of forklifts and provide our customers with professionalism and top quality. Financ... more
6
Facing lathe make: VEB Zerbst type DP 1000 mach 33068 Built in 1968 Specifications: Swing over bed 1000 mm Swing over bed 1250 mm Swing over cross slide 630 mm Distance Faceplate / slide 315 mm Distance longitudinal slide / faceplate 460 mm spindle taper DIN 55022/11 gr workpiece weight 1600 kg Planscheinbendurchmesser 1,000 / 1,250 mm 160 mm spindle bore 12 speeds from 5.6 to 355 rpm. 10 feeds from 0.063 to 1.4 mm / rev rapid traverse 2200 mm / min. Drive power 17 kW Weight 5.0 t with - hydraul... more
1
Ll8r99uxmCompressed air refrigerant dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. more
4
Duay3yGear hobbing machine CUGIR FD250 Country of origin: Romania Year of manufacture: 1986 Main technical data: max. hobbing diameter 250 mm max. module 6 mm max. axial travel 280 mm max. tangential travel 150 mm minim no. of teeths 8 table diameter 310 mm main motor power 5,5 kw total power 12 kw machine weight 5400 kg more
3
Capacity: 8 KW Voltage: 380V/220V/50Hz Control voltage: 24/12V Baj89umlnq As seen, ex works Iserlohn Germany more
1
Overall height: 2080 mm Stroke: 3000 mm Engine type: Diesel Capacity: 2500 kg Mast type: Duplex We are a specialist workshop with 20 years experience in the forklift truck and provide our customers with professionalism and top quality. Financing with Easy purchase rates is possible. Every unit we sell, we also bring back into cash. Upon request we provide throughout Europe, even with their own vehicles with ramp. For further questions we are happy to help you. We advise you without obligation an... more
1
Elect./Voltage: 7j3d9nfl9 1999 Sodick A535 MK25 Submersible Wire EDM Specifications Include: -- X, Y & Z Axes Travel 21.6"" x 13.7"" x 11.8"" -- Work Tank Inside Dimensions 43.3"" x 28.3"" -- Maximum Work-piece Weight 1760 Lbs. -- Maximum Taper 20 degrees 3.1""Features Include: -- Sodick Mk 25 CNC Control Power Supply, -- Complete Dielectric Filtration System -- Automatic Temperature Control Unit (Chiller) -- Submersible Flushing -- Automatic Wire Threading more
3
2014 Manitou MT625 Turbo Telehandler c/w Joystick Controls, A/C, Sideshift, Forks - 941423 Ptmukm This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty more
6
Dvhlt3rUsed Prima Platino 1325 2.5kw CNC Laser 2.5kw / 2500 watt Year of manufacture: June 2001 2 x cutting heads Cutting bed: 2.5metre x 1250mm Glassware / Optics replaced last year Fully service history / Good condition Can be seen working Foot print 10.5metre x 5.5metre 2 lenses: 5? and 71/2? Last service that took place: July 2017 Fully Serviced (every 11 months) Most recent information: Last service that took place: July 2017 New Hyper pulse board fitted July 2017   more
1
-Nisshinbo HIQ-1250 Jutoge more
6
***** MACHINE AVAILABLE TO END USER CUSTOMER ONLY ***** 400MM CENTRES X 100MM CENTRE HEIGHT, SENSITRON GAP ELIMINATOR, TAILSTOCK FINE TAPER ADJUSTMENT, GROSSENBACHER CNC, IDEAL FOR SMALL PARTS, VERY WELL MAINTAINED, 27,000 HOURS, POSSIBILTY TO HAVE BRAND NEW SIEMENS CNC FITTED..... WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER AND OFFER INSTALLATION,TRAINING, SERVICE. WE ARE SPECIALIST ONLY IN STUDER MACHINES SINCE 1984 PRECISION CYLINDRICAL GRINDING ... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. B7hj8xp8 HOMAG KAL 310/5/A25/S1 Single Sided Edgebander for Solid Wood 0.4 - 25 mm Edge thickness cap., min. panel width 55 mm for panel thickness 12 - 22 mm & under; 100 mm for panel thickness over 22 - 60 mm; -- Feed speed 18 - 24 m/Min (59 - 79 FPM); 80 mm Feed track pads & V-Groove belt on Top pressure beam. -- Servo Controlled Positioning infeed fence through the [...]: -- Pre-Milling Station #3481 with (2) 3 kW-150 Hz, 9,000 RPM Motors,(2) jo... more
4
2004 Yanmar B25-V Rubber Tracks, Offset, CV, Blade, Piped, QH c/w Bucket Bbhcg9ny0g This machine will be sold by Euro Auctions at an unreserved auction in Zaragoza, Spain on 6th March 2018. For more information go online. more
3
Doppstadt 1025 trommel drum , 10m x 2.5m diameter Y7axqkc 50mm in good condition can be made for full machine more
6
Erfurt C frame 250ton  mechanical power press M8wyx Adjustable stroke Total weight 18ton Max pressure 250ton Working way before bottom position of ram at max pressure 10,7mm Pressure at fully drawing depth 125 mp Number of strokesat idle running stroke of ram 50min Stroke of Ram 40 160mm Adjustment of Ram 110mm Counter pressure of cushion 16ton 6kp/m Can also quote for new c and h frame presses more
1
-AMADA HFB 125-30 Bavuubax9h more
6
Type of fuel: Diesel Field of application: Construction 9ewe3uq Make of engine: Perkins 2506A-E15TAG4 more
1
Elect./Voltage: 220 V, 60 Cy, 1 Ph M2ftz SCMI MINI-MAX ME 25 EDGEBANDEDR, SINGLE SIDED SINGLE PHASE0.4 mm to 3 mm (1/8"") Max. edge thickness cap. and 1.96"" max. panel thickness; semi-automatic strip & coil feed magazine (feeds coil material automatically and strips one at the time); Teflon coated glue pot w/fast (8-10) Minute heat-up time, 1.2 mm cap. [...]: -- ""ME 25"" 2-Head -- Single motor end trim (0.8 HP - 12,000 RPM motor) -- Top & bottom flush trims (0.8 HP - 12,000 RPM ea. ... more
4
2004 Komatsu PC35 Rubber Tracks, Blade, Offset, CV, QH, Piped c/w Bucket Bbhcejtgf7 This machine will be sold by Euro Auctions at an unreserved auction in Zaragoza, Spain on 6th March 2018. For more information go online. more
4
gear width 250 mm max. module 6 axial-feeds 0,1 - 10 mm/U radial feeds 0,1 - 15 mm/U F9hs97ad8 table load 2,0 t weight of the machine ca. 5,2 t more
5
Brand: HYUNDAI Model: ROBEX 25Z-9AK Type : mini excavator Givwywb Year : 2016 Hours: 145 work hours Power: 24 hp Operating weight: 2580 Kg Warranty: 12 Months C.E certificate: Yes Status: Used - very good condition Equipped with: Mitsubishi S3L2 diesel engine, 17.3 kw / 23.6 hp, 3 new digging buckets and hammer, Total length: 4.03 m, Total width: 1.5 m, Overall height: 2.5 m, 250 mm rubber tracks, piped music, quick coupling, closed cab with seat and AC heating, 2 speed, RADIO, reverse alarm,... more


komatsu fd...
every day

New machines via email!

Be informed!

to

to

Change search
KOMATSU FD 25
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close