Used Colchester Master 3250 for sale (67)

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Misc. accessories Coderx Rwnjpfx Af Dogl MARCELS MASCHINEN CH

Condition: new, Year of construction: 2025, 0350 mm 196 mm 0650 mm 170 mm 42 mm Cgsdpfsxxb Azox Af Dsl 7,5 kW

Condition: good (used), Used COLCHESTER MASTER 3250 center lathe and feed spindle lathe center height 170mm center distance: 650mm spindle bore: 42mm Infinitely variable speed from 15-3250 rpm 1 x SCHUNK wedge bar lathe chuck Ø160mm 1 x MULTIFIX steel holder size B with 4 inserts Machine light, chuck protection electrically fused, machine shoes 1 x rotating center point, 1 x rotating center point with pressure indicator 1 x drill chuck with tapered arbor Cgodpfouqkf Njx Af Del The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Cgsdpfotr Ud Sjx Af Del Weight 1250 mm between tips approx. 1450 kg

Condition: new, Year of construction: 2024, 0350 mm 196 mm 0650 mm 170 mm 42 mm 7,5 kW Csdpfxjwp Tpks Af Dogl

Condition: ready for operation (used), lathe Colchester Master Cedpfx Ajd Hdqvjf Dogl

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Cedpsu St S Ajfx Af Dogl Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Cgodpfx Afoufud Re Djl Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: new, Year of construction: 2026, 0330 mm 210 mm 0635 mm 167 mm 40 mm 2,2 kW spindle turning speed - stepless 30-3000 U/min Cedpfx Aox R Eqcef Dogl

Condition: used, Colchester Tornado 100, 12 station turret, Fanuc OT control, New 1997, fitted with Multifeed ML1 bar feed unit. NOTE - Buyers outside of UK please contact us first before purchasing, export documents to be obtained prior to export. Cedpfx Afex R Tu Aj Degl Specifications: Machining Length: 350 mm Bar Capacity: 61 mm Max RPM: 4,000 RPM Turning Dia: 420 mm

Condition: good (used), Year of construction: 2007, turning diameter over cross slide: 370 mm, spindle bore: 104 mm, turning length: 2,000 mm, turning diameter: 554 mm, center width: 2,000 mm, turning diameter over bed slide: 554 mm, swing diameter over cross slide: 370 mm, turning diameter over top slide: 554 mm, spindle speed (max.): 2,000 rpm, total length: 4,100 mm, total width: 2,000 mm, total height: 1,750 mm, overall weight: 3,600 kg, rotational speed (max.): 2,000 rpm, Equipment: rotational speed infinitely variable, Centre distance: 2.000 mm Swing: 554 mm over bed / 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2.000 rpm 3-jaw Chuck: Schunk Ø 350 mm Camlock Controller: GE Fanuc Featured with: - 1x Fixed steady Ø 245 mm (without base plate) - 1x Fixed steady Ø 390 mm (without base plate) - 18 Parat toolpost holders - Various jaws for chuck - Centre points - Cooling unit - Machine Manuals Country of origin: UK Motor power: 7,5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg Cgedpfxjx Id Dce Af Del

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg Cgodpfx Aoxnqzxsf Djl power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

Condition: good (used), For sale: Colchester Triumph 2500 lathe, fully functional and ready for operation. The lathe is equipped with a Fagor digital readout and has a coolant pump installed beneath the chip tray. Technical data: Center height: 167 mm, Distance between centers: 635 mm, Swing over bed: 330 mm, Swing over cross slide: 210 mm, Spindle bore: 40 mm, Drive power: 2.2 kW. The sale includes 15 tool holders, a live center, and machine feet. Loading is problematic. Cgodpfsxw N I Nex Af Djl

Condition: used, Year of construction: 2011, Manufacturer: Colchester Model: Alpha 2800XS Year of manufacture: 2011 Control system: Fanuc 21i-TB – a proven platform for precise and fast machining control Turning diameter over bed: 800 mm – suitable for large workpieces Turning diameter above the slide: 500 mm Maximum turning length: 1500 mm – ideal for long parts C-axis: Yes – allows advanced operations such as off-axis milling and drilling Cgjdpfx Aex Rra Rjf Dol

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Centre height: 195mm Distance between centers: 650mm Cedpfjx Hrumsx Af Degl Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 54 mm, turning diameter over bed slide: 390 mm, 3-jaw chuck digital read-out Multifix tool holder device tail stock steady rest Technische Daten / technical details: Spitzenweite / center to center 765 mm Umlaufdurchmesser über Bett / rotary diameter over bed 390 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 240 mm Umlaufdurchmesser in der Kröpfung/ rotary diameter in the gap 580 mm Spindelbohrung / spindle hole 54 mm Drehzahlbereich 16-stufig / spindle speed 16-steps 25-2000 UpM /rpm Antriebsleistung / drive capacity 5,5 kW Gewicht der Maschine ca. / weight ca. 1300 kg Cgodpfx Afsx Evzbj Dol Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 2015, operating hours: 5,000 h, condition: ready for operation (used), General Data Machine weight 1800kg Main Drive Spindle speed range 2500 Cjdpfxex D Nwds Af Dogl This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2007, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rp9023 Cgsdpfjx H Anwsx Af Dsl Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 390 mm, spindle bore: 116 mm, turning diameter: 635 mm, turning diameter over bed slide: 390 mm, turning length: 2,000 mm, Used lathe in very good condition, including a 400 mm 3-jaw chuck, 1 x steady rest and a Multifix toolholder. Technical specifications: Turning length: 2000 mm Swing over bed: 630 mm Swing over cross slide: 390 mm Cedpfx Afjx Eln Rj Degl Swing in gap: 900 mm Spindle bore diameter: 116 mm Total weight: 4230 kg Chuck mounting: D1 11 in. Camlock Morse taper: No. 6

Condition: good (used), functionality: fully functional, Machine Name - Colchester Machine Model - Triumph 2000 Cgedpfx Ajuk H Rbsf Dsl Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Condition: ready for operation (used), Colchester Triumph 2500 Lathe Swing over bed: 400 mm Swing over cross slide: 246 mm Distance between centres: 1270 mm Centre height: 195 mm Max. turning diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2,500 rpm Infinitely variable spindle speed ranges: - low: 14–300 rpm - medium: 36–830 rpm - high: 109–2,500 rpm Overall dimensions: 2,600 mm x 1,300 mm x 1,800 mm (L x W x H) Accessories: 5 Multifix tool holders Steady rest Live and dead centers Drill chuck Jaws Cabinet Cgodpsxfrgdofx Af Dol Coolant pump You are welcome to come and inspect the machine. We are happy to organize affordable shipping for you. You will receive a proper invoice. A net invoice can be issued for international customers with a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may be subject to deviations, and errors in the item description may occur and are reserved.

Condition: good (used), turning diameter over cross slide: 267 mm, turning diameter: 432 mm, center width: 1,500 mm, 3-jaw chuck diameter 250mm tool holder device tail stock Cgodpfetq Exrjx Af Dsl steady rest coolant device Technische Daten / technical details: Spitzenweite / center to center 1500 mm Dreh-Ø über Bett / turning diameter over bed 432 mm Dreh-Ø über Schlitten / turning diameter over sledge 267 mm Dreh-Ø über Kröpfung/ turning diameter in the gap 710 mm Spindelbohrung / spindle hole 76 mm Drehzahlbereich / spindle speed 20-1600 UpM /rpm Antriebsleistung / drive capacity 9,3 kW Gewicht der Maschine ca. / weight ca. 2310 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm Cgsdpfxoxd D Rfo Af Dol - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: 6000 x 1800 x 1800 mm 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 246 mm, spindle bore: 54 mm, turning diameter over bed slide: 400 mm, turning length: 1,270 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 75 rpm, Colchester Triumph VS2500 Gap Bed Lathe Immaculate Condition 50" Between Centres Spindle Speeds 75-2500 rpm Swing over bed 400mm Swing over cross slide 246mm Spindle Bore 54mm 2 Axis DRO Newall NMS3000 Interlocked chuck Guard Metric Machine LED worklight 6 x Quick Change Tool Holders 3 Jaw Chuck 10" Cgsdpfx Afoxxiyze Dsl 4 Jaw Chuck 12" Face plate 14" Fixed Steady Coolant Pump & System 3phase 400V Price includes free delivery with crane offload within 100 miles of Sheffield Any interest please contact me for inspection 

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: E2A010, MACHINE SPECIFICATION Maximum swing over bed 440mm Maximum turned diameter 215mm X axis travel 187mm Z axis travel (max. turned length) 420mm Carriage inclination 60° (slant bed) Spindle centre height (from floor) 950mm Spindle nose A2-5 Hole through spindle 64mm Maximum spindle speed 4000 rpm Spindle motor 7.5kW X axis Ballscrew (diameter and pitch) 32mm x 10mm X axis rapid traverse rate 30 m/min Codpfx Afsxwk Sps Dsgl Z axis Ballscrew (diameter and pitch) 32mm x 10mm Z axis rapid traverse rate 30 m/min Turret tooling type VDI 30 Turret stations 12 Approximate Weight 4000 Kg Machine Equipped with Fanuc 0i-TD CNC Control System Hydraulic 3 jaw chuck 170mm diameter 5 off toolholders Coolant system Lighting Interlocked guarding Manual