Used Colchester Lathes for sale (57)

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Fjdpfx Aernkhyofnsfu Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2008, Colchester Harrison Alpha 1400U CNC lathe Footprint: 1.7 x 3.1 m Height: Approx. 1500 mm Weight: 3200 kg Equipment: Electrically interlocked chuck guard, full safety guard, coolant tank and pump 100 l, fully extendable chip tray, machine lighting Machining length: 1250 mm Turning diameter: 400 mm Center distance: 1250 mm Spindle bore: 54 mm Turret, number of tools: 8 Ffodpfxjrnkdye Afnsu Tool size: Standard: 20 x 20 mm Boring bar: 32 mm No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 1998, travel distance X-axis: 290 mm, travel distance Z-axis: 1,920 mm, spindle motor power: 11,000 W, 3 chuck ca 400 mm Duplomatic 8 position revolver Steady rest big 400 mm Steady rets normal 300 mm Ffsdpfjyfd Hwox Afneu Pinole taper: 6Mk Stroke pinole: 180mm Quill Ø: 95mm Length: 3300mm Width: 1800mm Height: 1700mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X1T126, spindle bore: 42 mm, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 3,500 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Max. turning length: 650 mm Max. turning diameter: 350 mm Fodpfx Afsyg Hvwjnsfu Spindle bore: 42 mm Max. spindle speed: 3,500 rpm MACHINE DETAILS Control system: Fanuc Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,500 mm Weight: 1,800 kg EQUIPMENT 3-jaw chuck Multiple jaws Collet chuck Collets Steady rest Faceplate Parat tool holder

Condition: new, Year of construction: 2026, 0330 mm 210 mm 0635 mm 167 mm 40 mm Ffedpfxjyh Rn Rs Afnju 2,2 kW spindle turning speed - stepless 30-3000 U/min

Condition: new, Year of construction: 2025, 0330 mm 210 mm 1000 mm 167 mm Fjdpfx Afewp Tq Usnjfu 40 mm 2,2 kW

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Ffodov I Ddqjpfx Afnou Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Ffsdpfx Aeq N Ay Aofnju Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Fedpfsnr Nl Ssx Afnefu Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: new, Year of construction: 2026, 0330 mm 210 mm 1000 mm 167 mm 40 mm 2,2 kW Ffedpfjygm Srox Afnou

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Ffsdpfx Afetr Ud Sonsu Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools Ffodpfxox D Nwde Afneu • Drill chuck (keyless) for tailstock • Coolant pump

Condition: new, Year of construction: 2025, 0554 mm 370 mm 2000 mm 280 mm Fedpex Urtrjfx Afnefu 104 mm 11 kW

Condition: good (used), Used COLCHESTER MASTER 3250 center lathe and feed spindle lathe center height 170mm center distance: 650mm spindle bore: 42mm Infinitely variable speed from 15-3250 rpm 1 x SCHUNK wedge bar lathe chuck Ø160mm 1 x MULTIFIX steel holder size B with 4 inserts Machine light, chuck protection electrically fused, machine shoes Fodpfx Aeuqkf Nefnsfu 1 x rotating center point, 1 x rotating center point with pressure indicator 1 x drill chuck with tapered arbor The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Fjdpfx Afox Hrumsnofu Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVM50GIRJA/02115, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle Bore 42mm Spindle motor 7.5Kw Width over bedways 318mm Travel cross slide 250mm Travel top slide 100mm Travel tailstock barrel 145mm Taper in tailstock barrel No. 4MT Ffedeycg Thepfx Afneu Machine in Imperial execution MACHINE EQUIPPED WITH Newall DP700 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 Ffjdpfx Asrbm T Dsfnju -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Condition: good (used), COLCHESTER COMBI 4000 is a CNC turning lathe engineered for precision, high accuracy and reliability. Capacities: distance between centres 2000 mm, turning diameter over cross-slide 370 mm, swing over bed 554 mm, max turning length 2000 mm; Z travel 1920 mm, X travel 290 mm, spindle hole 104 mm, spindle nose D1-11, Camlock D1-6, tailstock Morse 6 CM, spindle stroke 178 mm Ø95 mm. Specs: 3-step speeds 16–1800 t/min, rapid traverse 10 m/min, spindle motor 11/7.5 kW, 50 Hz 3×380 V, weight ~4000 kg, overall L3300×W1800×H1700 mm. Equipment: 3‑jaw Ø400 mm and 4‑jaw Ø700 mm chucks, faceplate Ø680 mm, 90 l coolant, MULTIFIX toolholders, toolholder sets and reducing bushes, lamp, tailstock, steady, drill chuck, chuck protection. Delivers tight tolerances; ideal for automotive, aerospace, medical, watchmaking and machine tool sectors. Fsdpsx S N Hdsfx Afnsfu

Condition: used, Year of construction: 1999, Technical details: Ffedpfx Aov Azdwofnju turning diameter over bed: 554 mm turning dia. over face-slide: 370 mm turning length: 1000 mm centre distance: 1100 mm control: Fanuc 210i longitudinal traverse (z-axis): 1000 mm Transversal stroke (x-axis): 290 mm revolution per minute: 16 - 1800 U/min spindle stroke: 178 mm feed:: 10 m/min. spindle passage: 104 mm spindle nose: D1 - 11 tailstock taper ISO: 6 MT spindle drive: 11/7,5 kW connection voltage: 380 V electrics - voltage/frequency: 3 Ph / 400 V / 50 Hz V/Hz total power requirement: 11 kW Weight approx.: 4,0 t dimension machine xH: 3,3 x 1,8 x 1,7 m

Condition: ready for operation (used), Colchester Triumph 2500 Lathe Fsdpfxexfrgde Afnjfu Swing over bed: 400 mm Swing over cross slide: 246 mm Distance between centres: 1270 mm Centre height: 195 mm Max. turning diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2,500 rpm Infinitely variable spindle speed ranges: - low: 14–300 rpm - medium: 36–830 rpm - high: 109–2,500 rpm Overall dimensions: 2,600 mm x 1,300 mm x 1,800 mm (L x W x H) Accessories: 5 Multifix tool holders Steady rest Live and dead centers Drill chuck Jaws Cabinet Coolant pump You are welcome to come and inspect the machine. We are happy to organize affordable shipping for you. You will receive a proper invoice. A net invoice can be issued for international customers with a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may be subject to deviations, and errors in the item description may occur and are reserved.

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm Ffedpfexnqzxex Afnsu weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

Condition: good (used), functionality: fully functional, Machine Name - Colchester Machine Model - Triumph 2000 Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Fjdpfsuk H Rbox Afnjfu Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 390 mm, spindle bore: 116 mm, turning diameter: 635 mm, turning diameter over bed slide: 390 mm, turning length: 2,000 mm, Used lathe in very good condition, including a 400 mm 3-jaw chuck, 1 x steady rest and a Multifix toolholder. Ffjdpfx Afex Eln Rsnsu Technical specifications: Turning length: 2000 mm Swing over bed: 630 mm Swing over cross slide: 390 mm Swing in gap: 900 mm Spindle bore diameter: 116 mm Total weight: 4230 kg Chuck mounting: D1 11 in. Camlock Morse taper: No. 6

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Misc. accessories Ffjdpfx Afsrx Rwnjnou MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2007, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rp9023 Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Fodjx H Anwopfx Afnjfu Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.