Komatsu wb 97 s buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Gear motor, electric motor Speed 23 U/min Performance 7.5 kW Design B3 Diameter shaft Ø 60 mm Ip55 protection Dimensions 840/420/H420 mm 3ca9ngpj Weight 164 kg more
1
Instructions for drilling work Scharmann WB75 and WB80, as well as more available on request Qr33h7ys more
4
Lumberg 0970 PSL 211 PROFIBUS-DP A02 8 I / 40 ID: 0450 h 1017210249, included with com. used, normal wear, 100% functional, photos Dv2gbi more
6
IntNr.: 5081 * Device details: * Load capacity: 4000 kg Lifting height: 3200 mm Mast type: Duplex mast height: 2200 mm 9pg0b8zyv Length/width/height: 2950 / 1340 / 2120 mm Operating weight: 5860 kg * Equipment: * * Protection umbrella * 3rd valve * Attachments: * * Load backrest New hydraulic pump Large maintenance done All filters and oils new New seat On request we take care of transport to you. Another 250-300 forklifts, attachments and sweepers for you available im... more
5
plate thickness:50 mm drilling capacity diameter max.:40 mm drilling capacity diameter min.:10 mm burner type:Oxyfuel cutting total power requirement:20 kW weight of the machine ca.:6,8 t dimensions of the machine ca.:13 x 5,5 x 3 m Xlt9p8n2s table width:1500 mm table length:6000 mm Tool changer:5-fach Kaltenbach plate drilling and burning machine WBZ 1500, year 1997 Plate processing center for base plates, top plates, gusset plates, ribs, flanges etc. in the steel construction industry tech... more
5
Multi function punch, punch, hole punch, pneumatic punch Qkxl9vm9y -pneumatisch operated Model 1996 more
2
Camera reading: OMR, DM, Barcode 98007yeop Speed: up to 52.000 sheets / hour Reading: Cognex-Camera more
4
Lumberg 0970 PSL 213 PROFIBUS-DP A00 8 in ID: 044Fh, second-hand, normal wear, 100% functional, included with com. photos C0nbk39 more
6
IntNr.: 5420 * Device details: * Capacity: 1800 kg Lifting height: 200 mm Mast type: No mast height: 820 mm Length/width/height: 1700 / 700 / 1230 mm Operating weight: 454 kg The vehicle is offered, in the current status, as of the previous owner without warranty and without any warranty. Without valid FEM testing 4,004 (UVV). Any technical and optical defects are not corrected. You are aware that the vehicle is not repaired and is not the valid safety regulations. The vehi... more


komatsu wb...
every day

New machines via email!

Be informed!
5
plate thickness:50 mm drilling capacity diameter max.:40 mm drilling capacity diameter min.:10 mm drilling motor:7,5 kW burner type:Oxyfuel cutting hydraulic motor:4,0 kW L7itd weight of the machine ca.:6,8 t weight per piece max.:1500 kg table width:1500 mm table length:6000 mm Tool changer:5-fach Kaltenbach plate drilling and burning machine WBZ 1500 Plate processing center for top plates, base plates, gusset plates, ribs, flanges [...] the steel construction industry technical details: C... more
6
grinding length 1500 mm 80mmducep grinding width 500 mm workpiece height unbkt. mm total power requirement kW weight of the machine ca. 4,7 t dimensions of the machine ca. m more
5
Bending tool, die, upper blade, upper tool, straight tool 3mkx8bwd0 Tool for bending machine -geteilt Tool 30° size 196 x 26 mm -Gesamtlänge 2997 mm lengths 1 x 390 / 4 x 500 / 1 x 607 mm Weight 102 kg more
1
automat. Gang sawblade sharpening machine SMA-REF-6051 Type: sharpening machines Manufacturer: Vollmer Model: CANA / H Year: 1962 Working range: Sawblade width: 60 - 160 mm Uq8meg3 Sawblade length: 950 - 2.000 mm 30/50/75 teeth/minute Condition: ready for action under power Location: Western Germany Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
4
Lumberg 0970 PSL 210 PROFIBUS-DP A00 8 out ID: 044Dh, second-hand, normal wear, 100% functional, included with com. photos Biczrura more
1
Chuck: MK 5 Max drilling depth: 625 mm Spindle diameter: 80 mm Diameter face plate: 275 mm Headstock travel: 1100 mm Table transverse stroke: 1150 mm Maximum distance of face plate/insert stock: 2000 mm Speed range: (16) 10.1-1540 RPM Engine power: 7,5 kW 2-stage motor: Yes Spindle feeds: (12) 0.045 6.35 mm / Rev Table clamping surface: 1100 x 1400 mm Distance from spindle - machine table: 1100 mm Machine light: Yes Coolant system: Yes Digital equipment: Yes, Haidenhain VRZ 714 (m... more
1
grinding length:1000 mm grinding width:550 mm workpiece height:400 mm Rkfjf2vdb surface area:1300x450 mm cross feed motor:0,55 kW grinding wheel speeds:1400 U/min total power requirement:18 kW weight of the machine ca.:4800 kg Used / overhauled surface grinding machine, Make ELB, type SWBE 010 NCK, machine no. 163811079 Machine with automatic notification in all 3 axes. Overhaul scope: Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionalit... more
4
lifting capacity: 25 : M6 kg lift: - mm span width: - mm travel of hook: 18 7000 mm stroke speed /min: 4,5 m/min rope diameter: 16 mm Bhk8jgnq total power requirement: ca. 23,5 kW weight of the machine ca.: 3,4 t dimensions LxWxH: 3,8 x 2,6 x 1,3 m travel trolley 2 pcs available lifting height 18,7m travel trolley speed 16m/min rope guidance 2 x 2 times fixed more
5
Trench shoring, trench shoring, Kringsverbau, shoring, manhole, Systemverbau, shoring, shoring, manhole element, grave security-surrender in the current condition as seen 2x-channel strut dimensions 1240/3000/H970 mm Weight 650 kg Mslbnc more
6
Closing force: 2,700kN; Injection volume: 1.000cm³; Opening force: 100kN; Closing stroke: 495mm; (Clamping dimensions: 560x630mm;) width: 950mm; 4pcs. additional heating circuits 3,6kW max 230 ° C; Striping aid with electr. Drive; Control: B&R FLEX 3; 400V/50Hz 83kW; Weight: 11.7t; Hydraulic hours: 2.227h; Hall 4 I3d30mz more
3
20BA150FFWB2 Sanyo Denki BL Super servo amplifier, serial number according to the photo, used, low wear, 100% functional 9e3jg7h2t more
6
IntNr.: 5264 * Device details: * Load capacity: 2000 kg Lifting height: 2980 mm Egdqam7f3 Mast type: Standard mast height: 1960 mm Length/width/height: 1920 / 850 / 1240 mm Operating weight: 1264 kg * Equipment: * * DGS from Plexiglas We take care of transport to you 23 h operating hours according to the clock on request. Another 250-300 forklifts, attachments and sweepers for you available immediately. Also for rent! We like to buy their old. Special action hand palle... more
1
grinding length:600 mm grinding width:550 mm F3wrthj workpiece height:600 mm surface area:1000x450 mm max. table load:250 kg spindle drive:15 PS hydraulic pump engine:1,9/3,9 PS cross feed motor:0,75 PS :1400x1900 mm grinding wheel speeds:1400 U/min total power requirement:18 kW weight of the machine ca.:4100 kg Used / overhauled surface grinding machine, Make ELB, type SWB 06 VA II-K, machine no. 114461172 Machine with automatic notification in all 3 axes. Machine completely dismantled, cle... more
6
Vehicle data - make: Linde - type: T18 / / 4.497 STD / integrated charger - type of drive: electric - load capacity: 1800 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - built: 2012 - operating hours: 4497 - internal No.: C0485 _ _____ Mast data - mast type:-lifting height: 0 mm - height: 1350 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1350 mm - weight: 745 kg _ Batter... more
4
Gear motor, electric motor, three-phase motor, electric gear motor U9wcrsr8f Speed 97 U/min Power 1,1 KW Design B3 Diameter shaft Ø 25 mm Protection class IP54 Dimensions 570/280/H210 mm Weight 33 kg more
6
EN: Mt7wao Closing force: 2.700kN; Injection volume: 2.000 cm³; Breaking force: 100kN; Closing stroke: 550mm; Release force: 98kN; Retraction Force Separator: 58kN; Heating plates: 670x800x69mm; (Clamping dimensions: 560x630mm,) temperature control units: 3pcs. Regloplas H²O, 2pcs. Regloplas oil; Striping aid with electr. Drive; Control: B&R FLEX 3; 400V/50Hz 68kW; Weight: 13t; Hydraulic hours: 344h; Hall 4 more
3
20BA150FFWB2 Sanyo Denki BL Super servo amplifier, serial number according to the photo, used, low wear, 100% functional 9e3jqonpu more
2
Temperature range unbek. °C heating capacity unbek. kW Cooling capacity W circulating medium total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Lxem9 more
1
grinding diameter:250 mm grinding length:1200 mm centre height:135 mm max. workpiece diameter steady rest:80 mm W2qjjcer max. table stroke:1270 mm area table travel speeds:0,2-7 m/min max. table swivel out:+/- 8/6 ° min. automatic table adjustment:6 mm max. grinding wheel external diameter:500 mm max. grinding wheel width:63 mm diameter of the grinding wheel opening:203 mm size infeed of the grinding spindle head:40 mm area workpiece spindle rotation:45-500 U/min internal cone tailstock quill:n... more
6
Vehicle data - make: BT - type: PES 200 D / / initial lifting / 2897 h / HH 1860 mm - type of drive: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 1860 mm - range: 0 mm - year: 2011 - operating hours: 2897 - internal No.: C0458 99m7dbg2d _____ Mast data - mast type: standard - height: 1860 mm - height: 1450 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 14... more
5
Gear motor, electric motor, three-phase motor, electric gear motor Vmbqavfu9 Manufacturers gear BONFIGLIOLI type MVF49/F Manufacturers motor FIMET type MOF71A4 -Drehzahlen 197 U/min Power 0.37 KW Type B5 angle Diameter shaft Ø 18 mm Protection type IP44 -3 x engines available Award pieces Dimensions 400/198/H200 mm Weight 16.3 kg more
4
Cleaning products: Tri-E rear lubrication: approx. 3% Vaseline oil Chamber system with 2 baskets basket size Lxwxh 530 X 320 X 200 autonomy: approx. 1 hour (4 x 2 baskets on roller conveyor) M0jh9 more
4
Rexroth MGF3-31 / 040RA07VM-A433 MNR: R900970908 FD: 10928, serial number according to the photo, used, normal wear, 100% functional, included with com. photos 88gsph3sq more
2
Bag9n7mq33SINUS vise 088972 jaw width 65 mm jaw high 30 mm clamping length max. 80 mm total high ca. 92 mm base plate 220 x 130 mm more
4
Hunkeler WB6 7gjvsltx8 Web buffer module more
3
conventional dampeing Mz3dl more
5
Gear motor, electric motor, three-phase motor, electric gear motor Manufacturers gear BONFIGLIOLI type MVF44/F Manufacturer AEG motor type AD63NZ4 -Drehzahlen U/min Performance 0.18 KW Type B5 angle Gfvdj7p Diameter shaft Ø 22 mm Protection type IP44 -4 x engines available Award pieces Dimensions weight 7.2 kg / piece more
1
Edging saw + automation SMA-REF-6124 Type: sawmill sawing and separating Manufacturer: Wurster & Dietz 92g7n3z7q Model: FR 97 R Year: 1992 Power: 55 kW Working range: 2 shafts variable 1 fixed Thickness: 18 - 60 mm Width: 75 - 550 mm Length: 1.000 - 5.000 mm Features: a) Cross conveyor b) Equalizer c) Manipulation track d) Infeed table e) Edging saw f) Splinter sep. g) utfeed table (6-ropes) Condition: ready for action dismantled Location: Austria Availability: on demand more
2
FANUC A16B-1211-097 Control Board, used, low wear, 100% functional, included with com. photos Jfb3lb9 more
5
gebr. Column drilling machine make V-TRADE Model AEO 5040 A. No.: ZE 10154 year 2011 Drilling power 40 mm Spindle mount MT 4 Throat depth 340 mm Table size 540 x 440 mm Quill stroke 190 mm Table travel: manually 570 mm Motorized 430 mm Swivel table ± 45 ° Saeulen-Ø 140 mm 4 feed rates 0.1 - 0.4 mm / Rev Spindle speed m. Countershaft continuously variable 60-2600 RPM Motor 380 v / 2,0 kW External dimensions: Width 650 mm Depth 1000 mm 9287oc3cb Height 2450... more
1
Serial no. 1200, refurbished Kwg8380j more
2
Hakro Hotfoil system, 2 pulls, honeycomb, size 26x38cm 8gmabdh9x more
5
Conveyor belt conveyor conveyor belt conveyor -frame stainless steel VA -Speed ​​m / min -Gurtbreite 800 mm -length below 8500 mm above 7300 mm -Abmessung 8500/1600 / H2200 mm -Weight 2000 kg R29xwqpnf more
1
Autom. gang sawblade sharpening machine (max. 1.500 mm) SMA-REF-5419 Type: sharpening machines Manufacturer: Rivo Model: R 200 GA Year: 1985 Sawblade: up to 1.500 mm length Mzuyv Condition: ready for action Location: Southern Germany Dimensions: Weight: 500 kg Availability: on demand Terms of delivery: ex works free on truck Terms of payment: 100% before dismantling/loading more
3
HEIDENHAIN [...] used inverter 519-971-01, serial number according to the photo, to 112D, properly completely overhauled and tested with 12 months warranty, 100% functional, photos included with com. Yri8us more
4
Boring head Fabr.WOHLHAUPTER Type: UPA4/9703 Mo. 4XL-SL Recording MK5 with ISO40 Halter. Mzc22 For cutters diameter 22 H 7 / 3 holes Outside diameter of the boring head 100 mm. with wood box and accessories Nr. 4 more
2
No. 19-04-4 Manufacturer Kasto Type of WBS 150 / 170 Machine data Year built: approx 1980 L x W x h: approx. 800 x 1000 x 1300 mm Weight: 170 kg Good general condition Technical data Blade dimensions: approx. 300 x 30 x 1.5 mm Ceremony cut (continuous): approx. 0-45 degrees Gfv2yex Section: 0 degrees (90 degrees) About: approx. Ø 150 mm Square: approx. 150 x 150 mm Flat: approx. 170 x 150 mm Cutting capacity: 45 degrees About: approx. Ø 90 mm Square: approx. 90 x ... more
1
A3, standard machine, Size 34x46cm Etay9zn more
5
Scissor lift table, scissor lift, scissor lift, scissor lift -Traglast 1000 kg Platform, 3970 x 650 mm Measure 400 mm retracted Extended dimension 2200 mm -Max hub 1800 mm Qly7pavyk -no control -1 x scissor lift tables available Award pieces Weight 1000 kg more
1
Sawblade tooth setting machine SMA-REF-6032 Type: sharpening machines Manufacturer: MEINERT Model: PH 2 Year: 1991 Working range: Sawblades: 0n9bjsht 150 - 750 mm diam. 2 - 4 mm width from 8 mm tooth pitch 20 - 50 mm bore Condition: ready for action Location: Southern Germany Dimensions: Weight: 100 kg Availability: on demand Terms of delivery: ex works free on truck Terms of payment: 100% before dismantling/loading more


komatsu wb...
every day

New machines via email!

Be informed!

to

to

Change search
KOMATSU WB 97 S
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close