Used Kso 1500 for sale (4,562)

Condition: ready for operation (used), Year of construction: 2018, Type: 3D coordinate measuring machine (CMM), measuring range X/Y/Z: 300mm/250mm/150mm. Documentation available. On-site inspection is possible. Rcsdpfxoupk A Eo Afgjh

Condition: good (used), total height: 300 mm, total length: 3,980 mm, total width: 1,500 mm, Manufacturer: STOLLE Type: Cast Iron Specifications Metric US Standard Length: 3980 mm Width: 1500 mm Height: 300 mm Number of T-slots: 6 Spacing between T-slots / pitch: 250 mm T-slot size: 35 mm Weight per plate approx.: 4,700 ton Number of matching pieces: 2 Rcedjwp Dbdjpfx Afgeh Dimensions (Estimated) Length: 3980 mm Width: 1500 mm Height: 300 mm Weight: 4700 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not represent a representation or contract terms. We recommend you check all important details.

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 4218/ 12035, Axis height over bed: 1500 mm Speed: 0 - 315 rpm Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 6000 mm Rodpfxswqk Umo Afgech D 66 – 85 mm L = 8000 mm D 86 – 105 mm L = 12,000 mm D 106 – 125 mm L = 16,000 mm D 126 – 200 mm L = 24,500 mm D 201 – 250 mm L = 24,500 mm D 251 – 555 mm L = 18,000 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x1400x1750 mm Weight 1800 kg Rsdpfx Afev A Ht Dogjch Total power requirement 5 kw

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Rodjxt Ilfepfx Afgoch Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: new, Distance between centers 1500 mm Max. swing over bed 560 mm Rsdpfxezdr I So Afgech Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Rcodpfsz Aarcsx Afgsh Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5290, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Rcedpfx Afsz Aawxsgsh Technical data: - Year of construction: 2020 - Serial number: 5290 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: repair required (used), functionality: not functional, Circular shear, capacity 1500 x 6 mm, pneumatic system needs to be completely or partially renewed. Rjdpfxozq Sqaj Afgech

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm Rcodpfx Aey Spuusfgsh number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Rcodsziaggopfx Afgjh Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 1,600 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 127 mm, number of axes: 3, This 3-axis KNUTH Turnado 280/1500 was manufactured in 2018. It features a distance between centers of 1,420 mm and a swing over bed of 560 mm. The machine is equipped with a spindle speed range of 25 – 1,600 rpm and includes a 3-axis Digital Readout (DRO) and a quick change tool post. If you are looking to get high-quality turning capabilities, consider the KNUTH Turnado 280/1500 horizontal turning machine we have for sale. Contact us for further details. Technical specifications • Distance between centers: 1,420 mm • Swing over bed: 560 mm • Swing over cross slide: 360 mm • Swing in gap: 790 mm • Gap length: 180 mm • Bed width: 350 mmTravels • Compound slide swivel: ±52°Spindle • Spindle nose: Camlock D1-8 • Spindle bore: 80 mm • Spindle taper: MT7 • Number of spindle speeds: 12Feed rates • Longitudinal feed: 0.059–1.646 mm/rev • Cross feed: 0.020–0.573 mm/revThread cutting • Metric threads: 0.2–14 mm (47 ranges) • Module threads: 0.1–7 mm (39 ranges) • Whitworth threads: 2–112 TPI (60 ranges) • Diametral pitch threads: 4–112 DP (50 ranges)Tailstock • Tailstock taper: MT5 • Tailstock quill diameter: 76 mm • Tailstock quill stroke: 180 mm • Tailstock offset adjustment: ±12 mmMachine data • Main motor power: 7.8 kW • Voltage: 400 V • Frequency: 50/60 Hz Additional equipment • 3-axis Digital Readout (DRO) • Quick Change Tool Post • Chip conveyor • Extensive standard tooling package Technical Specification Counter Spindle Yes Driven Tools No Rcedpfx Ajzgfqfofgoh

Condition: new, Year of construction: 2026, functionality: fully functional, Edge grinding machine KSO 150 F PRO – NEW Scope of delivery: Grinding belt K 100, 5 x rubber rollers ø25, ø30, ø40, ø45, ø50 mm, 6 x grinding sleeves K80 ø25, ø30, ø35, ø40, ø45, ø50 mm, On-board tool, Miter stop Grinding unit can be swiveled manually using a hand crank, Machine stand made of welded steel, Oscillating grinding belt with separate gear motor, Oscillation can be switched on or off, Grinding platen with graphite coating, Height-adjustable grinding table, Additional table with dust extraction openings, Grinding sleeve attachment with attached work table, Adjustable stops 2 pcs. dust extraction nozzles ø100 mm, Size of work table: 950 x 450 mm, height adjustment 110 mm, 400 V, motor power 2.2 kW, oscillation motor 0.11 kW, Grinding belt length 2640 mm, width 150 mm, Belt running speed 14 m/s, Grinding area length 800 mm, width 150 mm, Oscillation stroke 15 mm, Swivel angle of grinding unit 0-45° Machine size 1750 x 1050 x 1200 mm, Weight 310 kg Redpfx Aeyxqtfjfgech NEW PRICE, MSRP 11,050 € Available for immediate delivery Transport possible for an extra charge!

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering Rjdoyg Nptepfx Afgsch -Platform: 7000/1500/H735 mm -Load capacity: 15 t -Tires: Solid rubber dual tires, 4 pieces, 425/150-305, see photos -Overall dimensions: 8570/1500/H735 mm -Transport dimensions: 7000/1500/H735 mm -Weight: 1840 kg

Condition: good (used), Year of construction: 2016, Apollo spiral conveyor, infeed at approx. 6.42m / outfeed at approx. 1.09m, approx. 40cm wide conveying path – used –: Price ex location (net): only €5,950 – dismantled, packed and loaded! Manufacturer: Apollo Model: SPC 1500-400-A4-6T Year of manufacture: 2016 Belt width: approx. 40cm Infeed height (top): approx. 6.42m Outfeed height (bottom): approx. 1.09m Spiral diameter: approx. 2m Kettenlänge (chain length): 37.5m Serial no.: 562044-100 Rcedpfx Afoyhxp Aegeh 230/400V / 50 Hz, 2.2 kW Speed (min): 40m/min IP54 Load capacity: 6.4kg/m Condition: good – very good Availability: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Weight 230 kg Rodevz Eu Ropfx Afgsch Total power requirement 1,6 kw

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No reserve price – guaranteed sale to the highest bidder! Rcodpfx Afoytbqvogoh Only 113 operating hours! TECHNICAL DETAILS Turning length: 336 mm Turning diameter: 440 mm Maximum bar diameter: 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Tool shank diameter for square tools: 20 mm Tool shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm X-axis rapid traverse rate: 30,000 mm/min Z-axis rapid traverse rate: 30,000 mm/min Number of tool magazine positions: 12 MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT Coolant system Chip conveyor

Condition: good (used), machine/vehicle number: 26041, Offer 26041 Technical data (approx.): Rcedpjyvrx Rjfx Afgsh - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm - Plate height without base frame approx.: 180 mm - Plate height with base frame approx.: 810 mm - Top plate thickness approx.: 115 mm - 11 T-slots in the table surface, length: 1500 mm - T-slot pitch in the table surface: 250 mm each - T-slot width approx.: 40 / 22 mm - T-slot depth approx.: 16 / 24 mm - Required space: L 3500 x W 2500 x H 1100 mm - Weight approx.: 4500 kg

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Garant, workbench with base cabinets / solid construction Rsdpfxsxzzfus Afgech -Worktop: 1500/700/H855 mm -Drawer cabinet: 5 drawers, layout/height see photos -Base cabinet: with trim -Transport dimensions: 1500/700/H855 mm -Weight: 170 kg

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench, solid construction -Worktop: 1500/700/H850 mm Rcedpfsxzzhpsx Afgoh -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Transport dimensions: 1500/700/H850 mm -Weight: 101 kg

Condition: used, Year of construction: 2001, functionality: fully functional, We have a Buhrs 1500 poly wrapping system available. Year 2001. This system is not very often used last years by former owner. The system will be delivered completely with vacuumpumps, so complete. SYSTEM INFORMATION System brand: Buhrs Machine type: Buhrs 1500 Poly Wrapping System Rcjdpfx Afsx Agk Segjh (max.13.000 c/h) Year: 2001 CONFIGURATION 1 Buhrs 1500 main product feeder, type shuttle feeder 1 Buhrs 1500 master base station 4 Buhrs 1500 rotary feeder 1 Buhrs 1500 module for filmpackaging Machine can be seen running!!!!

Condition: used, Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1440 rpm Rcsdecf Dh Eepfx Afgoh -Wave SW: 17 mm -Construction: B3 -Protection class: EX -Dimensions: 423/290/H240 mm -Weight: 27 kg

Condition: good (used), workbench, work table, assembly bench Redpfofdg Ihjx Afgoch -with: bench vise -Width: 1500 mm -Depth: 730 mm -Height without vise: 920 mm -Clamping jaws: 115 x 20 mm -Wingspan: 160 mm -Worktop thickness: 40 mm -Drawer: 1 -Weight: 85 kg

Condition: excellent (used), PANELS RETURN SYSTEM for EDGE BANDER (Right) To combine with a single-side Edge Bander allowing the operator (worker) to always stay at the in-feed side of the machine (the processed workpiece will automatically return-back to him). Blowing Air Table, infeed and outfeed (total dimensions mm 3520 x 2560) 180° transfer (mm 3120 x 2140) with motorized roller conveyors and motorized belts Rcodpoff R Tqsfx Afgsh Motorized carpet (mm 9080 x 1560) Panel Dimensions (MIN/MAX): Length - 240 mm / 2800 mm Width - 120 mm / 1300 mm Thickness - 8 mm / 60 mm opt. up to 100 mm

Condition: used, Workbench, work table, assembly bench -Width: 1500 mm Rsdpfjd Rbtrox Afgoch -Depth: 700 mm -Height: 840 mm -Work top thickness: 40 mm -Lockable drawer: 1 -Weight: 74 kg