Kubota mx 5100 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
3
plate thickness 4,0 mm blade length 100 x 100 mm R8j2898f7 motor manuell more
3
Alpha gear SP 075-MX1-4-140-000, hole distance of the drive-side mounting holes: 92x92mm, hole spacing of mounting holes output side: 60x60mm, used, normal wear, 100% functional Trn2gldt more
6
x-travel 760 mm y-travel 510 mm z-travel 520 mm a-axis 360 0 c-axis -30/+110 0 spindle turning speed - stepless 12000 U/min 9lhtvdsf2 more
6

Vertical M/C Hurco VMX 60T

Wiesbaden Germany
6529 km
2011
USED
Hurco VMX60t Vertical Machining Centr Traverses X Y Z: 1524 x 660 x 610mm, Table size 1676 x 660mm, Spindle speed 40 – 10000 rpm, 9hzrazpep Spindle taper DIN40, 24 ATC, Low volt light, 21.6kW spindle motor power, Hurco WINMAX control, Coolant, Swarf Conveyor more
6
turning diameter max. 560 mm turning length 1.070 mm control Siemens 840 D powerline distance between spindles 1.000 mm Main spindle: Max. rpm 5.000 min/-1 power capacity - main spindel 25 / 37 kW max. Torque 390 Nm spindle diameter in front bearing 120 mm spindle bore 79 mm max. bar capacity 68 mm C-Axis 0,001 ° chucking diameter 200 - 315 mm Milling Spindle: Number of revolutions max. 12.000 min/-1 power capacity - milling spindle 13,2 / 22 kW max. Torque 100 Nm tool taper HSK 63 A Holdi... more
3
control WinMax travel X/Y/Z 1060/600/600 mm spindle speed 12000 1/min 4th axis laid swivelling head 93c73nu2q 5-axis simultaneously processing tool magazine for 40 tools SK 40 coolant through spindle chip conveyor more
3

tool presetter BODMER MXV 500x700

Tönisvorst Germany
6359 km
1981
USED
measuring range X-axis 700 mm 8w8movxln measuring range Y-axis 500 mm Table dimensions 700 x 500 mm air pressure - required 6 bar weight of the machine ca. 0,5 t dimensions of the machine ca. 1,4 x 0,8 x 1,8 m projector MA 240 more
3
Alpha gear SP 075-MX1-5-140-000 gear, pitch of holes: 92 x 92 mm drive side or 60 x 60 mm output side, Ø recording for drive shaft: 24 mm, Ø shaft: 22 mm, used, good condition, 100% functional 8swy8exqm more
6
x-travel 1.060 mm y-travel 610 mm z-travel 610 mm CNC Vertical Machining Center Hurco VMX 42 t Year of construction: 2008 Control: ----- Ultimax Technical specifications: ----- Max. Spindle speed: 12,000 rpm (throttled to 10,000 rpm) Tool changer: 24-pieces 8pmie2zs8 Travels X / Y / Z: 1.060 / 610/610 mm Table load: 1,300 kg Equipment: ----- - Cooling system - Spindle cooler - Cooling water spray gun - Chip spray booth cabin - Flushing system t... more


kubota mx ...
every day

New machines via email!

Be informed!
5
x-travel 1200 mm y-travel 580 mm z-travel 600 mm spindle turning speed range 50 - 3650 U/min spindle taper ISO 40 table-size 1575 x 425 mm max. table load 800 kg quill stroke 152 mm distance spindle /table 100 - 700 mm distance spindle center to column: 600 mm feeds 28 - 1100 / 17 - 788 mm/min power capacity - milling spindle 5,5 kW digital readout 3 Achsen coolant voltage 380 V total power requirement 23 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,30 x 3,35 x 2,50 m ... more
5
x-travel 1050 mm y-travel 560 mm Juql8m z-travel 450 mm Control OSP spindle taper HSK63 spindle turning speed - stepless 12000 U/min weight of the machine ca. 8 t more
5
Manufacturer: KUBOTA Baumaschinen GmbH Model, type: KX019-4 Mileage: 917 hrs Year of manufacture: 2015 Technical parameters Ernkg7gl8 Own weight: 1855 kg Engine power: 11,8 kW / 16 hp Engine manufacturer, model: KUBOTA, D902 Number of digging buckets: 2 - slope - 100 cm, normal - 50 cm Bucket coupler: YES more
5
MXE 025 002030 00 radial blower with Lenze 90L-2 engine, serial number according to the photo, used, normal wear, 100% functional, included with com. photos 9rqqav0p7 more
6
spindle passage: 23 mm z-axis: 150 mm turning length: 150 mm stroke: x+z Achse / Axis/eje/eixo/os = 30 mm facing movement (x-axis): 30 mm longitudinal traverse (z-axis): 30 mm control: Manumeric K`MX Prog 2 spindle turning speed - continuous: 0-3000 / 0-6000 U/min feed speed: x/y: 5 mm/min feed speed: z: 10 mm/min tool turret: 2 Stück/pcs mit je/each 6 tools operating pressure: max. 45 bar total power requirement: 8,0 kW weight of the machine ca.: 2,2 t dimension machine [...]: 2,45x1,3x2,2 m d... more
6
x-travel 800 mm y-travel 560 mm z-travel 510 mm control 840 D Siemens Main spindle: turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 max. Torque 82 / 54 Nm tension force 8 kN work table: table surface area 1.100 x 560 mm max. table load 800 kg table height over floor 850 mm distance spindle nose and table 120 - 630 mm Tool-Presetter: number of toolpositions 30 pos. Max. mould width 80 / (125) mm max. tool length 300 mm max. to... more
6
rated capacity 260 kW capacity in kVA 325 kVA drive motor PS generator electrics - voltage/frequency V/Hz total power requirement kW weight of the machine ca. 8,00 t 9wdctp7xy dimensions of the machine ca. m more
6
x-travel 762 mm y-travel 460 mm z-travel 450 mm Yrc7zpk Control Okuma OSP700M weight of the machine ca. 5.5 t more
4

CNC M/C DOOSAN PUMA MX2100ST

Wiesbaden Germany
6529 km
2008
USED
1 off Turning Center G7rcc29 DOOSAN PUMA MX 2100 ST Mfg - year 2008 Fanuc 31 iTA control max. turning diameter 540/300 mm max. turninglength 1.020 mm Barcapacity 65 mm Y-axis 170 mm B-axis 240° 2x C-axis ATC with 40 stations Capto C6 system Millingspindle 18,5 kW,max. Spindlespeed 12.000 rpm 12 station lower turret, all stations for driven tools 20 bar high pressure coolant system Toolsetter, Renishaw Parts catcher + part conveyor Pneu. ejector Set of toolholders for lower turret Swarfconveyor ... more
3
Berger Lahr WDP5-228.05100 stepper drive, SER.-No. 9703111, used, good condition, 100% functional 9fgcxsgmp more
4
Tandem press brake Sadowski (Machines can be operated individually) Type HAP CNC 400 year: approximately 1986 Control: To Cybelec DNC 880 S pressing force of 1,100. (550 to. / machine) Stroke 600 mm bending length between the stands each 3600 mm max. 380 mm projection Whole bending length 5400 mm minimum gap betw. Table and plunger 370 mm maximum distance between Table & RAM 750 mm Width of the Presstsches 400 mm 700 mm height of the table above ground Overall height of the press a... more
5
spindle passage: 23 mm z-axis: 150 mm stroke: x+z-Achse = 30 mm control: Manumeric K`MX Prog 2 spindle revolutions per minute : 50 - 7200 / stufenlos U/min total power requirement: 8,0 kW weight of the machine ca.: 2,2 t space requirement of the machine approx.: L:2,3xB1,3xH:2,0 m Technical Details: Lateral cut for external tools: 16 x 16mm Internal tools D = 25,4mm S8yvf3z9q Feeder -fast movement in z-axis= 10 m/min Feeder- fast movement in x, y-axis = 5 m/min 2 turrets each with 6 stations fo... more
4
Type de machine : Doosan Puma MX 2100 ST Control: Fanuc 31i-B Year: 2011 Power on time: [h] 13.071 Spindle running time: [h] 5.000 (Spindel ausgetauscht / spindle exchanged) Available after: sofort / now 9mbzdltfv Specifications Max. turning length: [mm] 1.020 Turningdiameter: [mm] 540 Max. swing over bed: [mm] 750 Bar capacity: [mm] 76 Spindle nose: A2-6 C-Axis Rotational speed: [rpm] 5.000 Input power: [kW] 26 / 22 Travel: Y-Axis: [+/- mm] 230 (±115) Subspindle CNC-Spindle tiltin... more
3
Control Ultimax 4 Travel X / Y / Z 610/510/610 mm Spindle speed 10000 rpm 9dl3morvg Tool magazine for 30 tools SK40 Internal coolant more
6

vertical M/C HURCO VMX 50

Wiesbaden Germany
6529 km
2006
USED
HURCO vert. Machining center model VMX 50 Bu. 2006 Control Ultimax 4 Gxsi3ut Traverse path x/Y/Z 1.270 x 660 x 610 mm Workbench 1500 x 660 mm Tool changer with 30 stations Spindle taper DIN SK 50 Main motor 22 kW Spindle speed 40-8,000 rpm. Coolant system Chip conveyor more
1
Workpiece diameter 125 mm Grinding depth 160 mm Clamping length 1100 mm Total power consumption 0.5 kW Machine weight approx. 700 kg Space requirement approx. T E C H N I K A (Switzerland) Vertical Zentrierbohrungs - grinding machine Type ZSM 5100 serial No. 942024981 built in 1981 _____ 9apjetosp Top distance 50-1.100 mm Workpiece? 8-125 mm Workpiece weight approx. 120 kg Max Zentrierbohrungs-cone Æ 2-50 mm Zentrierbohrungs cone... more
6
Hotmelt Dispenser Nordson Meltex MX 4012-172 Year 1995 - Serial-No. 01031295 8quanhk3l -Available Immediately - -can be inspect- -on stock- more
6
GOCKEL U 65 PL x 5100 mm - Make : GOCKEL Germany Yrvbfvqpk - Typ : U 65 PL - Serial : 7110 - Age : 1985 - Table length : 5.100 - Table width : 300 - Max. stroke length : 5.100 - Stone size : Ø 350 x 70 mm - Motor power : 15 kW - Speeds VARIO : 2800 Rpm - Digital read out cycle feed - Digital readout depth adjustment - Variomatic feeds / rapid - Dimensions - Length : 7.100 - Width : 600 - Height : 500 - Weight : 7.300 - Incl. coolant / band filtration system - Size 7100 x 600 x 500 mm - M... more
6
Control: CNC NUM 760 Speed spindle 1 rpm: 50-7200 RPM Rotary head (x x): 6 x 6 x machine weight approx. kg: 2,000 kg Additional info: The machine has been disconnected for several years by the power! As spare part carriers, or it should applied a new software! Y2af9nypd We reserve the right to changes and error in the technical details and specifications. more
3
Control Winmax Travel X / Y / Z 1060/610/610 mm Spindle speed 12000 rpm 9dl2p2azd Tool magazine for 40 tools SK40 4th / 5th axis Kitagawa Table size 1270x610 mm more
6
CNC Multitasking Machine DAEWOO DOOSAN PUMA MX3000 mfg. year 07/2005 FANUC Series 18i-TB control max. turning diameter 540 mm max. swing diameter over bed/saddle 750 mm/600 mm max. turning length 1.520 mm max. bar working capacity 76 mm Gx7x3rkr spindle nose A2#8 ATC with 40 stations Capto C6 taper Coolant through spindle, 22 bar NC-programable tailstock, MT#4 Toolsetter Swarf conveyor mist extractor CE-mark weight 13.500 kg more
6

CNC lathe DOOSAN PUMA MX 2100 ST

Leingarten Germany
6632 km
2008
USED
Brand: DOOSAN Type: PUMA MX 2100 ST Year of construction: 2008 Turning diameter: 540 mm Phcdrmc Maximum turning length: 1020 mm Control: FANUC 31i-TA Swing over bed: 750 mm Swing over cross slide: 600 mm Spindle bore: 76 mm Max bar diameter: 65 mm Traverse path X-axis 1: 565 mm Traverse path Z-axis 1: 1050 mm Traverse path X-axis 2: 187 mm Traverse path Z-axis 2: 1050 mm C - axis: C2 360° (0.001 °) Main spindle RPM: 5000 RPM Spindle torque: 47 NM Spindle motor: 18,5 kW Speed m... more
6
• 2200mm x 5200mm bolster area • blank feed transfer system ( two way side feed) • 2- moving tool bolsters ( front and rear entry rails) • component transfer system • scrap drop to underfloor conveyor • component out feed system and conveyor Cfrm8vz • all controls and associated services to press more
6
workpiece diameter 32-150 mm clamping length 50 - 1.100 mm workpiece weight 120 kg center bore angle 60 ° grinding spindle diameter 32 mm total power requirement 0,3 kW weight of the machine ca. ca. 0,46 t dimensions of the machine ca. 0,75 x 0,85 x 1,85 m 7mdd0amgg more
3
Wire electrode, welding wire, welding wire br / br / -Metallpulver - cored wire br / -netto Weight 15 kg br / -28x packages available br / br -Price per package / weight fully 15.6 kg / package Qnqa9l0j more
4

Excavator Kubota KX080-3

BT78 3AJ Dromore United Kingdom
5363 km
2007
USED
2007 Kubota KX080-3- This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany on 25th and 26th October 2017. For more information contact Bram Van Den Enden or Erik Kortum. M2jk2 more
4
Manufacturer article no.: 942321AA-0015 Ms8gx Machining: milling / drilling Cone: SK 40 UPM: 15000 Rotary feedthrough: Yes Lubrication: Grease Internal cooling: Yes more
6
Hours of operation: 1151 Weight: 1800 kg -Double vibration Egsj20ops -Double drive -KUBOTA engine -ROPS -EPA -CE -Double vibration Double drive -Kubota engine -ROPS -EPA -CE -For questions about emissions standards, please contact us / / If you have questions for exhaust regulations please ask US more photos and quotes on / / more pictures and offers at: more
5
Hydraulic table shears Fabr. SADOWSKI type OPERATOR 4/5100 Built in 1970 Technical data: Cutting length 5100 mm 9zq727g maximum sheet thickness 4.0 mm Power 15 kW (380 V, 50 Hz) Weight approx. 14 t External dimensions 5800 x 2400 x 2200 mm high with: -motorized back gauge 1000 mm with display -motor-driven cutting angle adjustment -Table extension -Foot switch used, in good condition - still in operation to visit more
5
Pneumatic cylinders, air cylinders, Standard cylinders br / br / -Hubweg 250 mm br / -Kolbendurchmesser mm br / -Kolbenstange 20mm br / -Luftein- and output adjustable br / -2 units available br / -Stückpreis 125 Euro VAT. br / -dimensions 560/182 / H160 mm br / weight 9.5 kg br / Ite0bz2 more
3

2015 Kubota KX080-4 Kubota KX080-4

BT78 3AJ Dromore United Kingdom
5363 km
2015
USED
Wo2a0zkb2015 Kubota KX080-4 Rubber Tracks, Blade, Offset, CV, QH, Piped c/w A/C - JKUK0803001H33458 This machine will be sold by Euro Auctions at an unreserved auction in Leeds, United Kingdom on 18th, 19th & 20th October 2016. For more information contact David Betts on +44 7834 600040 or Gavin Sayles on +44 7738 457496 more
4
Machining: milling / drilling Cone: SK 40 Rotary feedthrough: no B2i9id8lg Internal cooling: no more
6
Weight approx.: 0,2 kg Dimensions (l x w x h) approx.: 100 x 40 x 40 mm Description: Packaged in 4 x 10 pcs. B8uamviu In Online Auction with approx. 476 further Machine Tools and other Assets! Bidding ends: Friday, 10 November 2017 from 8am (local time) Auction start price: EUR 120 (plus VAT and 15% buyers premium) Your contact person: Huy Trinh more
5

KMX 326 FIRST

Vougy France
6603 km
1999
USED
KMX 326 FIRST 92m2izzvn Tour poupée mobiles / Sliding head N° 1017/45 ANNEE 1999 / YEAR 1999 Sans porte outils / without toolholder more
5
Pneumatic cylinders, air cylinders, Standard cylinders br / br / -Hubweg 300 mm br / br -Kolbendurchmesser mm / -Kolbenstange 20mm br / -Luftein- and output adjustable br / -2 units available br / -Stückpreis 125 Euro VAT. br / -dimensions 605/182 / H165 mm br / -weight 10 kg br / W3quwae7y more
3
pressure:250 t chamfer lenght:5100 mm distance between columns:4670 mm stroke:400 mm throat:500 mm control:Cybelec DNC 90 Color 3D back stop - adjustable:800 mm rear stop:1200 mm stroke speed - idle stroke downwards:100 mm/sec stroke speed -return:100 mm/sec working feed:1 - 8 mm/sec mould space:670 mm Ptdnjy work height max.:1080 mm total power requirement:30 kW weight of the machine ca.:33,5 t dimensions of the machine ca.:6,5 x 2,7 x 3,5 m Zubehör: - diverse Tools - instruction manuals - Un... more
6
x-travel 762 mm y-travel 460 mm z-travel 450 mm Control Okuma OSP 700 M table-size 1000 x 460 mm table load 0,5 t tool taper BT 40 spindle turning speed range 50 - 7000 U/min max. torque on the spindle 95 Nm power capacity - milling spindle 7,5 kW rapid traverse 30 m/min weight of the machine ca. 5,8 t Cfbux9gg Accessories ATC (tool changer) 32-fach pos Coolant unit Coolant through spindle Other information Spindle hours: 11512 The milling spindle and the main- motor were overhauled in 2014 f... more


kubota mx ...
every day

New machines via email!

Be informed!

to

to

Change search
KUBOTA MX 5100
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.