Kubota b 6000 buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 220/400/440 V, 50/60 Cy, 3 Ph G828vx HWACHEON MEGA 100 X 6000 CNC HORIZONTAL LATHE -- Specifications: 42.5" Swing over bed, 28.3" swing over cross slide, A2/20 spindle nose, 10" spindle through hole, #260 spindle bore taper, (3) 30 to 650 RPM. spindle speed. -- Axis Travel: 22.6"(X) x 161.4"(Y), 236"/Min.(X and Y) rapid feed rate, A4 (H12) type of turret, 4 (12) Max. number of tool post tools, 6" quill tail stock Dia., #6 quill bore taper, 10.2" quill travel, 27.6" sliding ... more
5

CNC Turning- and Milling Center NILES N50 UC/6000

Mönchengladbach, GermanyGermany dealership location
6371 km
2000
used
turning diameter:900 mm turning length:6000 mm control:SIEMENS 840 D spindle bore:204 mm spindle turning speed range:10 - 1200 U/min max. workpiece weight between centres:6000 kg max. workpiece weight -without tailstock:750 kg W2ou33odw rapid traverse longitudinal:24 m/min rapid traverse cross:12 m/min total power requirement:150 kW weight of the machine ca.:56 t dimensions of the machine ca.:15 x 4 x 4 m CNC SIEMENS 840 D C-axis 0,002° driven tools, millings spindle HSK 100 automatic toolcha... more
5
Alternator regulator Manufacturer Bosch type 0190112 006 000 -5 x control X2wfcb0m2 Award pieces Weight 2.4 kg more
6
turning diameter over bed 1880 mm turning diameter over slide rest 1500 mm turning length 6000 mm spindle turning speed range 1 - 250 U/min turning tool - shaft cross cut 40x50 mm longitudinal adjustment 6000 mm cross adjustment 810 mm rapid traverse longitudinal 4000 mm/min rapid traverse cross 2000 mm/min controlled axis 2 main drive motor 80 - 130 kW bed width 1350 mm threading metric 1 - 120 mm/Stg. threading WHITWORTH 28 - 0,25 TPI thread - module 0,5 - 30 module Control Sinumerik 802D 7... more
5

Heavy Duty Lathe GURUTZPE Super BT 800-6000

Stockstadt, GermanyGermany dealership location
6564 km
1973
used
turning diameter over bed:1580 mm turning diameter over slide rest:1260 mm Cw70kdgw turning length:6000 mm spindle speed:: total power requirement: kW face plate: steady fixed: follower rest: : Used Heavy Duty Lathe, Make Gurutzpe, with the following features: Height of centers 800 mm Distance between centers 6000 mm Maximum swing in gap 1970 mm Maximum swing over cross-slide 1260 mm Included accessories: 2 steady rests 1 mandrel 3 bit 1 tray 4 bit Ø 1000 mm 1 follow rest ... more
11

TRUMPF TruMatic 6000 - 1600 FMC - 2,0kW

Neuenstein, GermanyGermany dealership location
6666 km
2013
good condition (used)
Year: 2013 Working hours machine: 26.513 h (15.05.2018) Working hours laser on: 3.836 h (15.05.2018) Working hours beam on: 331 h (15.05.2018) Laser power: 2000 Watt Max. punching force approx.: 220 kN Working range laser: 3085 x 1650 mm Working range punching: 3085 x 1740 mm Control: Siemens Sinumerik 840 D Max. sheet thickness approx.: 8 mm Space reqired approx.: 16880 x 9140 x 2767 mm mm Machine weight approx.: 22.500 kg Electrical connected load approx.: 67 kVA *The machine ist ... more
1

CNC LASER COMBO TRUMPF TRUMATIC 6000

North Carolina, United StatesUnited States dealership location
518 km
2010
used
Elect./Voltage: Iqgsl2b TRUMPF TruMatic 6000 Punch / Laser 3200 Watt -- 5 x 10 format with dual load and dual unload carts. -- Truflow 3200. -- Multi tool function. -- Multi bend function. -- Warped sheet detector. -- Multi sheer function. -- Wheel technology function. -- Tapping function. -- Stripline. -- Beam on hours 1935. -- Laser hours 10,321. -- Punch hours 10,356. -- Has been serviced by Trumpf. more
6
Axis measuring computer axis adjustment device wheel aligner Manufacturer Corghi Type exact 6000 The unit comes from a training workshop and is almost ungeraucht. More information on request and according to photos Please note special price! Twbvm8c SSonderpreis! more
5
Roller conveyor, conveyor, roller conveyor, taxiway, accumulation roller conveyor Roll width 500 mm Length 6000 mm Diameter roll 80 mm -Achsabstand 200 mm Height 270 mm -angetrieben gear Gear motor 0,25 kW speed 4.5 m / min -1 x roller conveyors available Award pieces Size 6000/640/H270 mm Kjdc89a Weight 230 kg more
7
Manufacturer MAZAK Model Nexus 6000-II Year of construction 2013 Control System Mazatrol Nexus 2 Movement X/Y/Z [mm] 800/800/800 Spindle speed 7.000 Spindle: Bcriu8m0vq Speed 7.000 rpm Power 30 kW Torque 774 Nm Gearbox 2 stages Werkzeugaufnahme SK 50 4. Axis: C-Axis Indexing 1° Pallet size 500 x 500 mm Load capacity max. 1000 kg Workpiece diameter max. 900 mm Workpiece height max. 1.000 mm In General: Tool magazin 43 stations Rapid travers in X/Y/Z 60 m/min Equipmen... more


kubota b 6...
daily

New machines via email!

Stay updated!
4

6 ton dumper Barford SX6000

More Barford Sx 6000
Omagh , United KingdomUnited Kingdom
5370 km
2007
good condition (used)
Mue8xk 2007 Barford SX6000 6 Ton Dumper c/w Roll Bar This machine will be sold by Euro Auctions at an unreserved auction in Brisbane, AU on 21st June 2018. View full inventory online or for more information contact Craig Hart on 0061 (0) 417 927 337 or Paul Haynes on 0061 (0) 429 534 493 more
4
Pneumatic cut-off saw for solid wood - Voltage: 3 x 380 v - CE safety standards - Standard execution: * saw support 1000 mm left and 1000 mm right * pneumatic pusher and feeder * 2 hand safety control * safety switch * brake engine * emergency stop Ddllrlv * protection grill * motor power 10 HP * saw blade diam. 500 mm * 3 dust hoods diam. 100 mm * saw capacity 60x360 / 135x250 mm Matrix 4-6000 Optimization line and fault readout with 6000 mm table length ... more
1

CNC MACHINING CENTER (W/ATC) BUSELLATO JET 6000

North Carolina, United StatesUnited States dealership location
518 km
1999
used
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Bbu9ynitrg BUSELLATO JET 6000 CNC Machining Center with ATC: -- Specifications: Working Cap. "X" Axis 126"(3,200 mm), "Y" axis 61.2"(1,550 mm), "Z" axis stroke is 15.7" (400 mm), max. material thickness 7.8" (200 mm). -- Positioning Speed:"X" axis is 377 FPM (115 MPM), "Y" axis 246 FPM (75 MPM), "Z" axis 98 FPM (30 MPM) -- Worktable:(8) Pneumatically locking panel supports, (4) lifter rails for heavy panels, (4) "MATRIX" vacuum pods per support; (8)... more
3

Welding Rotators BODE SAR6000 300 Ton Self Aligning Welding Rotator with Idler Support

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
2008
ready for operation (used)
Capacity Drive unit 150 tons, idler unit 150 tons = 300 tons total Work piece diameter Minimum 1000 mm - Maximum 8000 mm Tyre width 203 mm Input 400 / 3 / 50 Bcigbxl9kn Fitted with Mechanical anti-creep facility Equipment Rotation speed 75 - 1500 mm/ minute Length Driver 4200 mm Idler 4000 mm Width 1550 mm 1050 mm Height 1414 mm 1414 mm Nett weight approx. 17000 kgs more
5
Sewing machine motor, light electric motor, electric motor Power 0,25 kW Speed 6000 1/min Shaft ø 10 mm Design B3 Dimensions 230/140/H210 mm Weight 4 kg Ca8o9leo more
6
[...]: 6073\\\ * Device details: * Load capacity: 530 kg Lifting height: 3530 mm Mast type: Standard mast height: 2280 mm Length/width/height: 3660 / 990 / 2280 mm Operating weight: 1520 kg * Equipment: * * Protection umbrella * Roof cover \\**Weitere device information: * \ total length: 3660mm Total height: 2280 mm Total width: 1300 mm Rubber track width: 230 mm Range: 3860mm Breakout force on the Dipper daN (kgf): 780 (796) Außberchkraft a. LöffelzahndaN (kgf): 1560 (1592) ... more
6
turning diameter 1300 mm turning length 6000 mm control Siemens Sinumerik 840 D turning diameter over slide 1250 mm spindle motor 78 / 87 kW spindle turning speed - stepless 10 - 1244 U/min max. torque on the spindle 9880 / 2845 Nm 225 mm spindle diameter in front bearing 360 mm x-axis -20 -- 1050 mm y-axis -400 -- 395 mm z-axis 8070 mm milling spindle drive 38 / 48,3 kW milling head speed 3500 U/min milling spindle - taper HSK 100 A milling spindle diameter 110 mm b-axis -105 -- 95 ° solutio... more
5

CNC oil country lathe Tuscan LC34 x 6000

Wormerveer, NetherlandsNetherlands
6208 km
2006
good condition (used)
TUSCAN oilcountry CNC lathe type 6000 in good condition with spindle bore LC34 x 305 mm. Specifications: -Double 4-chuck Bcr9pdnskc -Control Fanuc 21-T manual guide -Between the centers 6300 mm -Turning on the bed 870mm -Turning over the cross slide 500 mm -Width of the bed 560 mm -Spindle bore 305 mm -Spindle connection A2-20 -Speed 4-400 -Building year 2006 Including: -Hydraulic Tailstock -8 POS. Turret -2 x 4-chuck -front and back side chip conveyer -Fully enclosed guard... more
10

Brake press 6000 mm AMADA STPC 250-60

Ennepetal, GermanyGermany dealership location
6422 km
1990
excellent (used)
Technical details Tv37d3rt Pressure 0255 t bending length 6000 mm stand size 5600 mm control DNC 7000 total power demand 18 kW machine weight approx. 29.5 t space requirement of approx. 7 x 2.5 x 3.2 m technical details Machine is delivered with much tool. more
1

Welding Rotators BODE SAR6000 300 Ton Self Aligning Welding Rotator with Idler Support

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
2008
ready for operation (used)
Serial No. m40516 Capacity Drive unit 150 tons, Idler unit 150 tons = 300 ton total. Work piece diameter Minimum 1000 mm - Maximum 8000 mm Tyre width 203 mm Input 400/3/50 G9clylbwm Fitted with mechanical anti-creep facility. Features Rotation speed 75 - 1500mm Length driver 4200 mm Idler 4000 mm Width 1550 mm 1050 mm Height 1414 mm 1414 mm Nett weight approx. Driver - 10,900 Kilos. Idler - ... more
5
Mounting plate, marking-out, sine plate, plate, measuring, welding table, welding table, ribbed dressing plate Plate is planed Threaded holes M Width 1600 mm Length 6000 mm Height 850 mm panel thickness 25 mm Plate is with supporting ribs Dimensions 1600/6000/H850 mm Weight 3000 kg Go7vumg more
6

Rippert HDW-TK -6000

Petershagen, GermanyGermany dealership location
6478 km
1993
used
Manufacturer: Rippert Hordenwagentrockner, Type: HDW-TK -6000, Year: 1993, Control: Hand, Work piece width min-max mm: 1400 , Min.-max. workpiece height in mm: 200, Channel width in mm: 2 X 2020, Channel height in mm: 2400 + Register, Channel length in mm: 2 X 6000, Evaporation zone length in mm: 6000, Chain transportation system length in mm: Schiber, Year :1993 S7879d9j more
6

Excavator Kubota RX-141

Omagh , United KingdomUnited Kingdom
5370 km
good condition (used)
Hebcco3k3 Kubota RX-141 Rubber Tracks, Blade, Offset This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Northern Ireland on 22-23rd June 2018 at 9am. Please view our website for a full inventory and for contact information. more
4

bolster plate AUFSPANNPLATTE 6000x3000

Tönisvorst, GermanyGermany dealership location
6366 km
1989
used
floor-plate length 6000 mm floor-plate width 3000 mm floor-plate height 530 mm no. of grooves / flute distance 10/310 mm groove width 40 mm weight of the machine ca. 21 t Available: 3l3ytmzq7 4 pcs. 6000 x 3000 x 530 mm 1 pc. 4900 x 3000 x 530 mm more
4
Special Equipment: - 2 pcs. different belt cleaner units, one unit for solvent-based,one unit for water-based material, it is possible to change between solvent-based and water-based material, very quickly. - Quick change system for spray guns, allows quick change of spray guns - Producer Venjakob - Type HGS - DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine Dwcbvm - Actual condition, machine is not... more
5

Welding Rotators BODE SAR6000 300 Ton Self Aligning Welding Rotator with Idler Support

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
2008
ready for operation (used)
Capacity Driver 150 tons, Idler 150 tons = 300 tons total Work piece diameter Minimum 1000 mm - Maximum 8000 mm Bcigca7e8o Tyre width 203 mm Input 400 / 3 /50 Fitted with Mechanical anti - creep facility Features Rotation speed 75 - 1500 mm per minute Length Driver 4200 mm Idler 4000 mm Width 1550 mm 1050 mm Height 1414 mm 1414 mm Nett weight approx. 17000kgs more
4
Servo motor, electric motor, DC motor, stepper, stepper motor, stepping motor Speed 6000 RPM Power 1 kW Fhcefj0yu Type B5 Diameter shaft Ø 24 mm -1 piece of motors available Price per piece Dimensions 500/165/H210 mm Weight 18 kg more
1
 Start Chat

Copierer Ricoh Aficio MPC6000

Nürnberg, GermanyGermany dealership location
6749 km
good (used)
-Available Immediately - Los7zlkop -can be inspect- -on stock - can be test- more
1
1 x used Matrizze for brake Qmkkpgiwx Manufacturer: Busch Type: A6000 Year of construction: 1993 length: 6000mm 5 x different prisms for brake 180 tons weight: 800kg more
11

Barford SXR 6000

More Barford Sxr 6000
Amsterdam, NetherlandsNetherlands dealership location
6218 km
2007
ready for operation (used)
5.500 €
Offer
Another 8 days
dumper truck ; 75 kw; Engine: Iveco N45; 4 cylinders; tires : 16.0 / 70-20; capacity: 6000 kg; working hours on counter 3458 hours; ce certificate OK Juzqhq more
4
Special Equipment: - 2 pcs. different belt cleaner units, one unit for solvent-based,one unit for water-based material, it is possible to change between solvent-based and water-based material, very quickly. - Quick change system for spray guns, allows quick change of spray guns - Producer Venjakob - Type HGS - DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine B9s8mjn - Actual condition, machine is no... more
4
Serial No. 26207 Control Heidenhain TNC 415 Table Size 6000mm x 1030mm Longitudinal Travel X Axis 4000mm G9anfueh0 Cross Travel Y Axis 980mm Vertical Travel Z Axis 1700mm Spindle Taper 50 ISO Head Swivels 360 degrees on 2 faces Input 400/3/50 Rapid Traverse 5000 mm per Minute Spindle Motor 15 hp Spindle Speeds 30-2080 rpm Feed Rate 5000mm per Minute Length 23'8" Width 10'8" Height 12'8" Nett weight approx 18 tons / 18,288 kgs more
2
Spring balance, quick pointer, pointer dynamometer, crane scale -Tragkraft 6000 kg -Aussenmasse 450 x 750 x 220 mm Sau2bzhjp Net weight 60 kg more
6

Mini excavator Kubota KX 019 - 4

Wilp , NetherlandsNetherlands dealership location
6302 km
2017
used
Dimensions of cargo space: 320 x 130 x 235 cm Fq0wzcz Field of application: Construction Power: 12 kW (16 HP) Make of engine: 3 cilinder EPA marked Front tyres / undercarriage remaining: Variabel Latest inspection: 16-02-2018 more
5
Machine hours: Power on: ~ 36.000h Laser on: ~ 31.500h Beam on: ~ 14.500h Standard equipement - Closed machine frame with integrated laser unit - Motion unit for high precision processing - Torque drive in combination with direct linear drives - Enclosed beam delivery system - Single cutting head strategy - Chiller - Automatic pallet changer in longitudinal direction - Conveyor belt for small parts / slug - 17" Touch screen - Work area lighting - Positioning laser diode - Spra... more
11

Kubota KX 61-3

Amsterdam, NetherlandsNetherlands dealership location
6218 km
2004
ready for operation (used)
7.000 €
Offer
Another 8 days
Earl Crane; 18.2 kw; Engine: Kubota V1506; 4 cylinders; additional hydraulic line; baking; rubber tracks 300 mm; shortcut; working hours on counter 4136 hours Bcrelr8zdd more
4
Special Equipment: - 2 pcs. different belt cleaner units, one unit for solvent-based,one unit for water-based material, it is possible to change between solvent-based and water-based material, very quickly. - Quick change system for spray guns, allows quick change of spray guns - Producer Venjakob - Type HGS - DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhau... more
6
Maximum bending length: 6,000 mm Maximum sheet thickness: 2 mm steel 3b878720o 8 different bending angle adjustable Several additional bending Rails more
5
Servo motor, electric motor, DC motor -max speed 49/6000 RPM Performance 0.52 kw torque motor 1.15 NM Shaft ø 25 mm Type B5 Dimensions 410/140/H140 mm Qpec0kx27 Weight 8 kg more
4
Welding positioner for 6t max load facplate diameter: 1.6m turning speed 0,03-0,6 rpm motorized tilting Bcmjvwfxic handremotecontrol also availible for renting more
8
Lymphdrainagegeraet compression device PowerQ 6000 plus, year of 2013, operating hours: 87 H2kuq3l more
6

saddle stitcher Horizon Stitchliner 6000

Germering b. München, GermanyGermany dealership location
6837 km
2015
used
3 MONTHS LA-POSTPRESS WARRANTY except electronics offer consists of: - 3 x air-suction collator AC-80Sa, 2xVAC-80Sm - additionally 2 Hohner stitching heads 43/6S - CC-06 - TB-30 saddle stitcher Stitchliner 6000: - accumulator and folder ACF-30S - saddle stitcher SPF-30S - three-knife-trimmer HTS-30S Cutlgko3 Horizon Stitchliner 6000: Horizon ACF-30S + Horizon SPF-30S + HTS-30S accumulate&folder + saddle stitcher + three-knife-trimmer - inlet format: max. 502x352mm; min. 199x138mm loa... more
1

Surface Plate UNBEKANNT 6000x1000

Ennepetal, GermanyGermany dealership location
6422 km
1990
used
table length 6000 mm table width 1000 mm table height 950 mm total power requirement 0 kW M0d8t weight of the machine ca. 5 t dimensions of the machine ca. 6 x 1 x 1 m more
6

Rotate end screens Stainless steel SPIROMATIC SPIROSIFT 6000

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
SPIROMATIC Fn2rj99 more
6
Jorns long Abkantmaschine BJ 05.2010 1250 mm insertion depth motorized scissors motorized Backgauge CNC 700 touch control Working length 6400 mm Power 1.25 mm customer service new (new cable / cutting apparatus - new stop fingers for depth stop) Shipping charge option available Bcsfwzblxa Assembly and instruction by appointment more
12

Lathes Waldrich Siegen HB 4500 x 100 NC x 6000

Babberich, NetherlandsNetherlands dealership location
6320 km
1977
ready for operation (used)
Technical data Tfbpwxgb Turning diameter over bed Ø4500 mm Drehlänge6000 mm more
4
Track axis type crawler, Minnibagger, crawler excavator Wheel ø 290 mm Command 70 mm Feather Hhtzvh2h3 Clamping cylinder more
6
Cargo space capacity: 6.000 l Field of application: Construction EPA marked Transport dimensions (LxWxH): 3.2x1.6x2 Bccak90vpa more
3

Travelling column milling - fixed table BUTLER Elgamill HE-NC 6000

Möckmühl-Züttlingen, GermanyGermany dealership location
6645 km
1986
used
travel -x axis 4200 mm travel -y axis 1670 mm travel -z axis 1050 mm table surface area 6000 x 1030 mm tool taper ISO 50 spindle motor 30 kW turning speed range - spindle 16 - 1600 U/min feed range 2 - 2500 mm/min rapid traverse 7,5 m/min total power requirement kW weight of the machine ca. 25 t dimensions of the machine ca. m * CNC-continuous control HEIDENHAIN TNC 155 with monitor * electronical handwheel * direct measuring system HEIDENHAIN for X-, Y- and Z-axis * universal milling head... more
7

Vertical screw conveyors NIVOBA VEENDAM D500-6000

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
NIVOBA VEENDAM Ne87x more


kubota b 6...
daily

New machines via email!

Stay updated!

to

to

Edit search
KUBOTA B 6000
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close