Kubota kx 36 3 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Manufacturer: KUBOTA Baumaschinen GmbH Model, type: KX019-4 Mileage: 917 hrs Year of manufacture: 2015 Technical parameters Own weight: 1855 kg Engine power: 11,8 kW / 16 hp Engine manufacturer, model: KUBOTA, D902 Ernkg7gl8 Number of digging buckets: 2 - slope - 100 cm, normal - 50 cm Bucket coupler: YES more
4
05-08 Kubota KX41-3V Rubber Tracks, Blade, Offset, QH, Piped c/w Expanding Undercarriage - Choice of 3 M7tdf This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 15TH and 16th December 2017. For more information go online. more
6
This is a used, defective machine. The engine runs properly. The arm is torn down and entwass down in moto area. The machine has Rodlinerplatten and only 2200 hours. Hydraliksteuerung is right. 8zs8gh more
6
14581 3jsvwzeu Kubota KX 019-04 mini digger Reach: 4070 mm. Speed: 2/4 km/stunde max Buckets: 22-40-100 cm. more
3
used, good condition, little used manufactured by Guilliet type KXK 180 built in 1995 2t2ngqfhm Masch.-No. 3031 CE tested for type examination GS-wood dust approved number of spindles 4 4 motors je 3,7 kW planing width ca. 180 mm planing height ca. 120 mm shaft diameter 30 mm table length ca. 2000 mm cutter system turncutter HM 50 / 30 mm pre-cutter cardan feeder protective hood Move in front of the dresser cycle control feed speed from 8 m/min. electrical adjustment Digital displays for thickn... more
4
2007 Kubota KX71-3 Rubber Tracks, Blade, Offset, QH, Piped - Choice of 2 Plelrh09 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 15TH and 16th December 2017. For more information go online. more
6
This is a used, defective machine. The engine runs properly. The arm is torn down and entwass down in moto area. The machine has Rodlinerplatten and only 2200 hours. Hydraliksteuerung is right. M2aof more
4
05-08 Kubota KX91-3 Rubber Tracks, Blade, Offset, QH, Piped c/w 3 Buckets - Choice of 4 Baj9likg0x This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 15TH and 16th December 2017. For more information go online. more
6
RENT OR BUY USED STUDER LIKE S35, S36 FAVORIT, S40CNC, S20CNC FAVORIT, S25, S33, ECO 650, S30 LEAN PRO, S145, S20-2, S40-4, S40-2 (RENT ONLY AVAILABLE IN UK OR ITALY) WE BUY ANY GOOD USED STUDER CNC FROM YOU. GOOD STUDER FOR SALE/WANTED... Baqm97fkay STUDER OPERATOR TRAINING, STUDER SERVICE, STUDER INSTALLATIONS, STUDER GEOMETRY CHECKS, STUDER GRINDING COURSES STUDER EXPERIENCE SINCE 1984 AFFITTASI O ACQUISTO RETTIFICATRICE IN TONDO USATE ESTERNI/INTERNI PRONTO CONSEGNA STUDER S35, S36 FAVOR... more


kubota kx ...
every day

New machines via email!

Be informed!
3
swing dia. over long. slide mm spindle turning speed range U/min diamond disc diameter mm Usszeyv2 total power requirement 1,5 kW Weight kg max. width of grinding wheel 50 mm ratio 0 max. dia. of grinding wheel 400 mm weight of the machine ca. 0,35 t dimensions of the machine ca. 1x1x1,3 m Pre-Dressing Device for Gear Grinding Wheels more
5
Gear motor electric motor speed 36 r / min Power 0.75 KW-B5-diameter shaft 30 mm brake 24 V, IP 65 protection 6x gear motors available-price-piece weight 36 kg Libgz more
6
Vehicle data - make: still - type: R 60-25 / / HH 4360 mm 3 + 4 valve battery from 2010 - drive type: electric - load capacity: 2500 kg - load Centre of gravity:-lifting height: 4360 mm - range: 0 mm - year: 1991 - hours of operation: 9356 - internal No.: C0069 _ Mast data - mast type: standard - height: 4360 mm - height: 2730 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2730 mm - weight: 4450 kg _ 8qnd3bhvh Battery ... more
3
Projection welding machine, spot welding machine, Presschweissmaschine Rating 60 kVA Unloaded up to 450 mm Arm distance from 213 to 473 mm Exwmrg9gu Force 4 kN more
6
"AS NEW" ONLY 3600 HOURS - HIGH PRECISION UNIVERSAL GRINDER F3yecoz S20-2 TOOLROOM EXTERNAL CYLINDRICAL GRINDER WITH INTERNAL READY (ANOTHER S20-2 400MM CENTRES WITH EXTERNAL+INTERNAL +ACCESSORIES ALSO AVAILABLE BY SEPERATE NEGOTIATION) *****FREE OPERATOR TRAINING ON ALL MACHINES SOLD IN NOVEMBER***** 650MM CENTRE DISTANCE x 100MM HEIGHT, SWIVELLING TABLE AND WORKHEAD, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, SONY DIGITAL READOUT IN X AND Z AXIS. ... more
5
Procedures: X = 3,600 mm Y = 920 mm Z =: 870 mm Control: iTNC 530 Head: Fixed and oil-cooled. 8nlhu2ouz Recording: SK 50 Tool Magazine: 30 Spindle: 12.000 rpm. IKZ Chip conveyor Various tools. more
5
Gear motor electric motor speed of 36.5 rev / min-power 0.75 KW-B5-diameter shaft 30 mm brake 24 V Protection class IP 65 Weight 36 kg Qlm0bid9w more
5
Ghielmetti GNT 36 tape equipment, used strong traces of use on the body, otherwise normal wear, 100% functional D2qha0c2o more
5
Vehicle data - make: Stabau - type: 58-DE515 / / slewing range 360 / 400 mm side-shift - drive type:-capacity: 1500 kg - load Centre of gravity: 500 mm - height: 0 mm - range: 0 mm - built: 1999 - operating hours: 0 - internal No.: C0239 _ Mast data - mast type:-lifting height: 0 mm - height: 0 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ C2mehuhjy Dimensions - length: 0 mm - width: 0 mm - height: 0 mm - weight: 334 kg _ Battery & charger - battery voltage: 0 V - batte... more
6
Technical details Spindle diameter 225 mm x trail 8000 mm y way 5600 mm z-way 2100 mm w-axis 1400 mm Spindle speeds - infinitely variable 0-650 RPM Spindle retainer ISO 60 feed continuously 5 - 3000 mm / min Boqns3gc Rapid traverse 5 m / min Machine weight approx. 150 t Space requirement approx. 12 x 5 (+ 5) x 8 m Total power requirement 120 kW Additional information Traghuelsenbohrwerk has been overhauled in 2006 and modernized. Original built in 1972 contro... more
4
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY----- *****ONLY 14,700 HOURS UNIVERSAL STUDER S36 FAVORIT***** 500mm GRINDING WHEEL, 1000mm BETWEEN CENTRES x 175mm CENTRE HEIGHT, MOVABLE TAILSTOCK (not like many that are FIXED restricting machine setups!!!) WITH TAPER FINE ADJUSTMENT, WHEELHEAD ZERO DEGREES +/- 8.5 DEGREES, SENSITRON, LOW WORKING HOURS, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STEEL, CERAMICS ETC.... more
5
working area: mm Punching capacity: kN punch diameter: 9pv0yxmpc Spare parts for a FICEP a16.36N In this Ficep spare parts package the following parts are included: control panel and monitor, 3 servomotors for the X, Y and Z axles (Type 4452200033) and a Mitrol CNC control. more
5
Bending tool, die, bottom blade, lower Prism tool Tool and base tool for bending machine Mqoxt Prism tool V Groove 11/20 mm -Vierkant 55 x 26 mm -Gesamtlänge 3637 mm Lengths 3 x 834 / 2 x 415 / 1 x 305 mm -Unterwerkzeug-Vierkant 60 x 60 mm -Gesamtlänge 3314 mm Lengths 3 x 830 / 2 x 412 mm -Total weight 94 kg more
5
SKF IGZ36-20 universal controller for industrial lubrication systems, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Yrmyec more
1
Horiz. band sawing machine (260 mm) SMA-REF-6160 Type: band sawing machines Manufacturer: Kasto Model: HBA 360 / 600 U Year: 1991 Working range: Cutting height: max. 360 mm Cutting width: max. 600 mm Sawblade: 5.734 x 41 x 1,3 mm Features: driven roller conveyors Baovjn3zb2 infeed 2.900 mm outfeed 1.400 mm Condition: ready for action needs maintainance Location: Southern Germany Availability: on demand more
2
Edge milling machine/flush cutter wood produced type UF 362, 7,000 rpm. Baqbu7nfsw more
3
spare parts for Bosch CNC-Control Ce3ug3 Bosch Monitor + Memory power regulator board Micro 8 more
4
Gear motor electric motor Drehstommotor-speed 36/144 r / min Power 2.2 / 5.5 kw-type RF83WD132ML-8-2BS/HL/TF-brake-B5-diameter shaft 50 mm degree of protection IP 44 Weight 135 kg Qlwy7shze more
3
Siemens Teleperm M 6DS1141-8AA E: 2 + C79458-L436-B510 E: 32, used, mint condition, 100% functional Mzvwb more
6
travel -x axis 210 mm travel -y axis 610 mm control SIEMENS 840 D Sinumeric spindle bore 65,0 mm main drive 15,0 kW feed speeds 24 mm/min quill stroke 120 mm dist. between centers 500 mm weight of the machine ca. 4,5 t dimensions of the machine ca. 2210 x 1500 x 2210 mm * CNC-control Emcotronic T1 * 3-jaw chuck * quick clamping chuck with collets * optical preselection device * 8-fold turret * tailstock with center 2qyr2i * various accessories Out of a company closure. Inspectable under pow... more
6
Zimmerei-circular saw HOLZ HER type 2136 145 mm the machine was never used, comes from a large carpentry and was bought as a spare machine Depth of cut: at 90 ° there are 75 145 mm, 45 ° 110 mm at 60 °, and 75 mm very light, infinitely variable cutting height adjustment up to 145 mm lift attendant the RIP fence can be used on both sides and can magnify even the surface of the machine table, it can be used also on a guide rail very compact and stable unit works fine When pushing the saw the ... more
6
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY----- *****FREE OPERATOR TRAINING ON ALL MACHINES SOLD IN NOVEMBER***** 500mm GRINDING WHEEL, 1000mm BETWEEN CENTRES x 175mm CENTRE HEIGHT, MOVABLE TAILSTOCK (not like many that are FIXED restricting machine setups!!!) WITH TAPER FINE ADJUSTMENT, WHEELHEAD ZERO DEGREES +/- 8.5 DEGREES, SENSITRON, LOW WORKING HOURS, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STEEL ETC..... more
6
Eisele HB 360 SE horizontal band saw, used sawing-capacity 360 mm miter: both sides 45° Gki79azds speed of sawblade stepless adjustable coolant more
4
revolving top, revolving lathe, revolving Morse, revolving centering point 36 mm Barrel top schaftgelagert Recording MK4 -1 x top available Award pieces 28alrbnfx Weight 2 kg more
4
Maho 28A1 relay Board [...] 27.073600, second-hand, normal wear, 100% functional, included with com. photos 982wbtenk more
2
Band display after linksmit roller conveyor type 3607.0065 (built 1996) Bao0rhcypo more
6
Zimmerei-circular saw HOLZ HER type 2136 145 mm the machine was never used, comes from a large carpentry and was bought as a spare machine Depth of cut: at 90 ° there are 75 145 mm, 45 ° 110 mm at 60 °, and 75 mm Uxh0sh3p very light, infinitely variable cutting height adjustment up to 145 mm lift attendant the RIP fence can be used on both sides and can magnify even the surface of the machine table, it can be used also on a guide rail very compact and stable unit works fine When pushing th... more
6
brinell hardness: 250 Coph70x Vickers: nein mm throat: 145 mm distance between table / ram: 200 mm connection electric: 220V / 6A Weight approx.: 180 kg dimensions L x W x H: 0,56 x 0,22 x 0,73 m construction type = C- frame testing material = steel / cast iron and Non-ferrous metals type of testing : static testing ( Brinell) support plate 250 - 187,5 - 125 - 62,5 - 31,25 - 15,62 kp support plate Ø 100x20mm height-adjustable 140mm spherical head with steel ball Ø 1mm sale as is, as per discri... more
4
Gear motor electric motor speed of 36.5 rev / min-power 0.75 KW-B5-diameter shaft 30 mm brake 24 V Protection class IP 65 Weight 36 kg Qlhvhn30n more
4
VC Kracht 0.1 F1 PS / 71 flowmeter 1-364989/1 G-13, included with com. used, low wear, 100% functional, photos D20f7egu3 more
3
Legal importation with import band 2qzdhq Prior forklift Exchange cutting tables more
6
Machine type: T 52-4-KB-F + 2.T36/4 Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: 52 X 84 cm Available from: 01/2018 Machine is: in production Bcv8fhk3 flat pile feeder Tremat 1st Station T52-4-KB-F with 4 buckles 1 knife 2te Station... more
5
You buy a new, 5 * rack system. (more than 100,000 places sold) from Lower Saxony: 36 pitches with 5 years warranty! This offer includes: Material for 1 reason field + 3 extension panels consisting of: 5 stand part of 3,000 x 1,050 mm Jb8uor0z8 16 traverses 2,700 x CE120 mm 32 pins, 10 ground stake, load signs COMPLETE for 36 PITCHES The bars have a usable length 2,700 mm. The permissible load capacity 2,800 kg (when uniformly distribuited l... more
3
floor-plate length: 3500 mm plate width: 1700 mm plate height: 360 mm weight of the machine ca.: 4,1 t transport dimensions LxWxH: ca.3,5 x 1,7 x 0,3 m Dzdjlj3jk more
5
Gear motor, electric motor, Drehstommotor Speed 36/144 U/min Performance 2.2/5.5 kw Type RF83WD132ML-8-2BS/HL/TF Brake Type B5 Diameter shaft Ø 50 mm Protection class IP 33 Qk9alzsjm -2 x engines available Prize piece Dimensions Weight 160 kg more
6
Infranor EL 86 map LK1077700044 + card BTS 13659 00 033 from Schiess Nassovia expanded machine, used good condition, 100% functional, included with com. photos Ehdnfjn more
4
maximum capacity load 5,000 kg Dgjwiah *lifting height 15 metres* number of strands 2 load chain 10 x 30 decoiling of hand chain per metre of lifting - 174 m lifting force at nominal load 34daN weight approx. 115 kg 4 units on stock - price per unit 2 untis sold!   more


kubota kx ...
every day

New machines via email!

Be informed!

to

to

Change search
KUBOTA KX 36 3
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close