Used Kuhn Fc 302 G for sale (14)

Condition: used, Year of construction: 2006, PTO shaft hydr. contact pressure control / Lsdpfjtp I Ilsx Afuehl

Condition: used, Year of construction: 2006, PTO shaft hydr. cutter bar relief hydr. swivel / Ledpfjtp I Ihjx Afujhl

Condition: new, Umbra Group / Kuhn ball screw drive total length: 1900 mm, thread length: 1460 mm, thread diameter: 80, pitch: 10 mm, nut: 105 mm, flange diameter: 145 mm, bolt circle: 125 mm, paragraph 1: length: 195 mm, diameter 60/50 mm, thread: M60 x 2 mm, paragraph 2: length: 165 mm, diameter 60/56 mm, thread: M50 x 1.5 mm, unused, 100% functional, scope of delivery as per photosATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lhedpfoz Adfajx Afuel

Condition: used, Year of construction: 2026, Working width: 6.40 meters Width in working position: 6.75 meters Number of rotors: 6 Number of tine arms per rotor: 6 Transport width: 2.95 meters Transport height: 3.30 meters Turning at the field edge: by manually adjusting the angle of the wheels Grass deflectors above the tine revolutions Fixed spreading angle adjustment Rotor drive via DIGIDRIVE finger clutch made of forged, case-hardened steel PTO speed: 540 rpm Balloon tires 15x6.00-6 Outer rotors hydraulically folded up for transport Three-point linkage, Category 2 Swivel head trailing device Lhjdpfx Afszdmt Njuol Mechanical vibration damper 1 single-acting hydraulic cylinder Power requirement at the PTO: 22 kW/30 hp Weight: approx. 850 kg Location: 54595 Prüm

Condition: used, Year of construction: 2020, Working width: 8.40-12.50 m Middle swath width: 1.40 - 2.40 m Transport width: 3.00 m Transport length: 9.95 m Transport height: 3.95 m 1 central swath Number of rotors: 4 Rotor diameter: 3.20 m Number of tine arms per rotor: 11 on the front rotor, 12 on the rear rotor / 4 double tines per tine arm Lhsdsv H Rw Uopfx Afujl Sealed, maintenance-free MASTERDRIVE GIII gearbox 3D pendulum suspension 4 pivoting wheels per rotor Price: EUR 38,500.00 net Location: Getränkemarkt-Platz

Condition: used, Applicable material: Hay Lhsdpfx Aozgw Amofuel

Condition: used, Applicable material: Hay Working width: 730 cm Lhsdey Ta Axspfx Afusl

Condition: ready for operation (used), functionality: fully functional, Facing and centering machine KUHN KAZ 80-2 -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering length / endless -Clamping unit with self-centering vice -Spindle drive 1.8 kW -Drill chuck -Chip tray -Connection cable -Forklift pocket for transport Lhodpfxjz Aquue Afuel Dimensions: L x W x H 1.7 x 0.7 x 1.4 meters / Weight 600 kg Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine underwent a comprehensive overhaul for €7,000. Documentation is available. Work processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Center drilling Fully automatic work sequence: - Clamping, tool holder closed - Rapid traverse forward - Working feed - Dwell time for cutting Lsdpfx Afsiamn Ssushl - Rapid traverse back - Releasing, tool holder open Technical data: Max. workpiece diameter (round) 80 mm Max. workpiece diameter (6-sided) 70 mm Min. workpiece diameter (round and 6-sided) 10 mm Min. workpiece length 450 mm Speed range, infinitely variable Stage I / Stage II = 51-306 / 102-612 Electrical equipment 220/380 V, 50 Hz Motor power, main motor kW 1.3 / 1.8 Motor power, coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: used, Year of construction: 2025, Working width: 6 meters Transport width: 3 meters Number of harrow sections: 4 x 1.50 meters Number of tines: 192 Tine length: 540 mm Lsdpfjzdmuaox Afuohl Tine diameter: 7 mm Tine spacing: 31.25 mm Number of tine rows: 6 Number of support wheels: 6 Folding mechanism: 3-part Three-point hitch, Category 2 Required power: 51 kW / 70 HP 1 single-acting hydraulic cylinder + 1 double-acting hydraulic cylinder Image is for illustrative purposes only. Location: null

Condition: used, Year of construction: 2023, _____For sale on behalf of a customer: Cultimer 500 R, manufactured in 2023, working width 5m, working depth 5-35 cm, transport width 3.0m, number of tines 16, number of leveling discs 16, NSM stone protection system, mounting category III and IV, HD liner roller with hydraulic height adjustment, wing shares, minimum power requirement 300 hp, location: null. Lodpfezdmumex Afuohl

Condition: new, Year of construction: 2023, _____Bale dimensions: 1.20 x 1.00 - 1.50 m Maximum bale weight: 1,100 kg Overall length: 4.55 meters Lhodpfx Aoki Einjfuol Overall height: 2.51 meters Loading system: Side loading arm with clamping device Wrapping table: 4 belts Bale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when film runs out or film tears VT 30 terminal Fully automatic film cutter 1 EW (single-acting) and 1 pressure-free return or 1 DWS (double-acting) Special equipment: Magazine for 4 film rolls Storage location: null

Condition: used, Year of construction: 2019, Frame swivel device hydr. pendulum support wheel / Ledpfjr N Nc Rjx Afuehl

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,998 h, color: red, overall weight: 16,200 kg, Authorized SUBARU dealer in Łaziska Górne offers for sale: Kuhn SPW 22 Intense – a self-propelled feed mixer wagon designed for animal feed distribution, equipped with two internal vertical augers (so-called "worms") and an impressive capacity of 22 cubic meters! The machine comes from the first owner, has an original low operating time of under 8,000 engine hours. Regularly serviced and in use. For interested buyers, we can deliver the machine to your specified address – for more information, please contact our sales representatives. The machine is ready for immediate operation, perfect for medium and large farms seeking an efficient, precise, and economical solution for loading, shredding, and mixing TMR. --- IMPORTANT! The feed wagon is equipped with many new components, including: - Conveyor belt - New milling head for the loading rotor - New planetary gearbox - Engine oils and filters freshly replaced at current operating hours TECHNICAL SPECIFICATIONS: Model: KUHN SPW INTENSE 22 Year of manufacture: 2017 Operating hours: 8,000 mth Tank capacity: 22 m³ Machine type: Self-propelled feed mixer with loading cutter DIMENSIONS & WEIGHT Overall length: approx. 10.8–11.0 m Overall width: approx. 2.50 m Height: approx. 3.05–3.10 m (depending on tires) Curb weight: approx. 16,200 kg Lsdpfxowbqm Re Afushl Turning radius: approx. 8.8 m – excellent maneuverability in tight farmyards ENGINE / DRIVE Engine: 6-cylinder FPT / Fiat Powertrain Power: approx. 165 kW / 224 HP Emission: SCR system / AdBlue Transport speed: up to 25 km/h MIXING SYSTEM 2 vertical augers with speed adjustment up to approx. 55 rpm KUHN technology dual-wing auger tips – improved flow, faster mixing, lower energy consumption High mixture homogeneity and short mixing times Robust mixing chamber – designed for intensive operation LOADING / CUTTER Loading milling head reaches up to approx. 6 meters high – takes silage even from tall silage stacks and silos Smooth speed and cutting force control Fast and clean loading without material spillage Can handle all types of silage: maize, grass silage, alfalfa, brewer’s grains, etc. DISCHARGE PERFORMANCE & FUNCTIONS Conveyor discharge belt with adjustable feeding speed Precise feed distribution directly onto the feeding table or into troughs Chamber designed for complete emptying – no product residue CAB & OPERATION Ergonomic VISIOSPACE operator cab – excellent visibility over the cutting head and working area Grammer operator seat (air suspension) Joystick control Reverse camera Radio Air conditioning Possibility to set automatic mixing and unloading programs TIRES / CHASSIS Typical tire configuration (for this model year): Front: 445/45R19.5 Rear: 315/70R22.5 Chassis engineered for intensive farm use, also on challenging terrain MACHINE CONDITION The machine has 8,000 hours, is fully operational, well-maintained, and regularly serviced. It has been used on a single farm. No hydraulic leaks SCR and AdBlue systems function perfectly All electronics and controls fully operational Tires in good condition (add wear percentage if known) The machine is ready for inspection and testing. Quoted price is net and applies to export and business customers. Personal customers may benefit from a significant discount – We invite you to contact us directly by phone for your best price :)