max. dia. of grinding wheel: 175 mm
revolution per minute: 2750 m/sec.
boring diameter: 20 mm
number of stations: 2 Stück
total power requirement: 0,4 kW
weight: 15,4 kg
space requirements of the machine approx.: L:380xB:252xH:270 mm
-On the base stand are 4 drill holes with dia. 10mm for installation on working table available.
- motor VEM CS 175 with 220/380V-50Hz; (1,9&1,1A) type of protection P33,
-connection plug CEE 16
- with grinding support und grin... more
From plant closure! 1 x panel width = 2.700 mm 1 x panel width = 1,800 mm Depth = 1,100 mm max specialist. Shelf load = 2700 kg max. Bay load = 7200 kg 2 frames = 3,000 mm high 1 frame = 3500 mm high 6 x Wooden shelves 38 mm thick 2 x collision mounting bracket Transport Dimensions L / W / H = 3,500 / 1,200 / 800 mm original price ca. EURO 1,400.00 + VAT.
We advise you gladly by phone before purchasing!
Following parts are included in this service (multiple quantities are in stock - please separately request)->
150 stand 4, 4m - 6m high x 105cm deep (424,65 m and 1788 Euro pallets)
894 IPE trusses for 4 stock levels inside 270 cm for 3 europallets
1342 IPE depth stege galvanized 105 cm
NEW galvanized M12 300 ground anchor
Load plate and ORIGINAL Mac operating & instructions for testing according to BGR 234
The shelv... more
good. Rod 60 mm rod length 3380 mm feed speed 200 600 mm / s max. Loading weight 2500 kg drive power 1.5 kW outdoor Mass: Length 4900 mm Width 1100 mm Height 1350 mm Weight about 2000 kg duct was 21 mm machine-magazine attached to MANURHIN KMX 20
3itf7kt0uSpindle support: MK 3, quill stroke: 200 mm,
Speed range: 180 - 2000 rpm. in 8 steps,
Feed range: 0.08 - 0.31 mm / rev. in 4 steps,
Weight: 1,2 t
A spindle is equipped with a thread cutting device. more
Mori Seiki Dl- 20 Schon mit neuer Lackierung
Max Diameter Bar Capacity 2" / 1.63"
Max Swing Over Bed 11" / 11.8"
Max Turning Diameter 9.4"
Max Machining Length 9.06" / 4.72"
Distance Between Spindles 42.9"
Main Motor 15 HP
Spindle Speed 40 - 4000 RPM
Tools 12 (2 Turrets)
Spindle Bore (Left / Right) 2.4" / 2.0"
Spindle Nose A2-6
X-Axis Travel (Left / Right) 7.3" / 8.9"
Z-Axis Travel (Left / Right) 10.8" / 32.3"
Machine Dimensions 181.1" x 80.2" x 82.7"
Machine We... more
Reconstructed Container Handling Gantry Crane
in single girder box construction with double rail trolley
Capacity on the ropes approx. 45,0 t
Span actual approx. 60,0 m
Jibs swing leg useable / total approx. 15,0 / 18,0 m
fixed leg useable / total approx. 16,0 / 21,3 m
Lifting height above floor under spreader approx. 17,5 m
Construction / reconstruction Kocks / Teichmann
Year of reconstruction 2010 / 2017
Crane equipped with:
- Double rail trolley with rope stabilization in crane and trolley t... more
Multi spindle drill Fabr. BOLEY type VG 13
Table size with gutter 320 x 530 mm
Table size without channel 240 x 440 mm
Table with 2 longitudinal grooves
Spindle exits 13 piece
8 spindle speeds 375-3000 rpm
External dimensions 1250 x 1050 x 1930 mm
Weight 600 kg
-Drill feed by lifting of the workpiece / drilling table
-Drill bit feed manually by hand lever or with two-hand operation
by means of pneumatic cylinders
-automatic fee... more
Four side planer Weinig
type: L 121
with infeed magazin approx. 1,80 m long
planning width 120 mm
planning height 150 mm
4 grooved driven infeed rolls from top with separate hydraulik pump
2 grooved, driven infeed rolls in the table
1. bottom 4 kW
2. top 4 kW
3. right 4 kW
4. left 4 kW
5. right 4 kW
6. top 4 kW
7. bottom 4 kW
8. top 4 kW
9. universal 4 kW
at the outfeed side: cross transport 2,50 m long with 4 cross transport rails, transport way 1,20 m
Palettenregalsilo a paper merchant, 14,000 pallet spaces, new - price on request! There is also the possibility (preferred) to acquire this property in the Munich area and operate !! 4Q15-5 SILO Manufacturer: RGB: Dambach / shelves: Stoves / handling: Horstmann Year: 1993 Length of the silo: approx 105m Width: Semi-automatic warehouse: 10m, fully automatic storage: approximately 16,50m, height about 10 12m Condition: Used Available: Immediately Location: Bavaria plans like as a pdf on request! S... more
DIOSNA kneading merry-go-round consisting of:-DIOSNA Wendelkneter, type: W401, with reinforced engine - 4 piece boiler for each 400 kg dough - DIOSNA lift trucks, type: HK600 - REIMELT silo - cage - Panel - outfeed conveyor to feed 2 lines which can Kneader on request gladly visited REIMELT water and feeder - and be tested.
Turning and Grinding of train wheels
trainwheel capacity range: min dia 700 / max dia 1100 mm
equipped with 2 grinding heads + vaccuum system
grindingwheel dia: 400 mm
power on each grinding wheel: 8,6 HP
power on each vaccuum motor: 2,5 HP
flow: 20 ÑÑÐ°Ð½Ð¾Ðº Ð´Ð»Ñ ÐºÐ¾Ð»ÐµÑÐ½ÑÑ Ð¿Ð°Ñ.
Ð Ð°Ð·Ð¼ÐµÑÑ ÐºÐ¾Ð»ÐµÑÐ½ÑÑ Ð¿Ð°Ñ: Ð¼Ð¸Ð½ Ð´Ð¸Ð°Ð¼ÐµÑÑ: 700 - Ð¼Ð°ÐºÑ Ð´Ð¸Ð°... more
A lathe of manufacturer's ex-cell-O with motor quick feeds is available here.
The machine is in a good condition can be visited on request gladly in our warehouse and tested.
Type: DLZ 800 5000
Year of construction: 1971
Swing on the feed: approx. 900 mm
Swing over bed: 800 mm
Swing over cross slide: approx. 600 mm
Turning length: 5500 mm
Bed width: 500 mm
Spindle passage: approx. 90 mm
Space requirements: 7500 x 175... more
Storage System for steel trading center, 480 Cassette 460 mm x 305 mm x 6500 mm on left side 270 Cassette different width each 6500 mm long. The storage system is still in use. Total size of the bar storage system ca. lenght/depth 35 m x width 22 m x height 6 m Further Info and Layout on request more
Vehicle data - make: BT - type: LPE 240 / S / / 2786 STD / 1940 mm long tines of fork - type of drive: electric - load capacity: 2400 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - built: 2010 - operating hours: 2786 - internal No.: 481 _
Mast data - mast type:-lifting height: 0 mm - height: 0 mm - free lift: 0 mm - carriage: 0 mm - forks: 1940 x 180 x 60 mm _
Dimensions - length: 0 mm - width: 0 mm - height: 0 mm - weight: 1145 kg _
Battery & charger - battery... more
We offer here a MONFORTS CNC high-performance sub-spindle lathe with MCS 800 (Sinumerik 840 C), double turret, C-axis and driven tools
The machine is in our warehouse in Hagen and can be visited on request
Two machines in one
1. Clamp pipe - Machining 2nd side
5. Remove precast
6. Automatic surrender
Clamp 7. tubular member
Type: DNC 3
Control: Siemens Sinumerik 840 C
Swing over bed: ... more
* Device details: *
Capacity: 1600 kg
Lifting height: 3140 mm
Free lift: 1520 mm
Mast type: Duplex mast height: 2090 mm
Length/width/height: 2100 / 1050 / 2100 mm
Operating weight: 3000 kg
* Equipment: *
* Protection umbrella
* 3rd valve
* 4 valve
* Full free lift
* Working lights front
One pedal design
On request we take care of transport to you.
Another 250-300 forklifts, attachments and sweepers for you available immediately.
Also fo... more
Vehicle data - make: BT - type: LPE 240 M / / 3143 STD / 2400 mm long tines of fork - type of drive: electric - load capacity: 2400 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - built: 2007 - operating hours: 3143 - internal No.: BR128-1 _
Mast data - mast type:-lifting height: 0 mm - height: 0 mm - free lift: 0 mm - carriage: 0 mm - forks: 2400 x 0 x 0 mm _
Dimensions - length: 0 mm - width: 0 mm - height: 0 mm - weight: 1130 kg _
Battery & charger - battery ... more
pressure 165 t
chamfer lenght 2100 mm
distance between columns 1600 mm
Control DA 65 DELEM
ajustment speed 100 mm/sec
working feed 10,0 mm/sec
stroke - stepless adjustable 350 mm
dayligth 550 mm
total power requirement 18,5 kW
range L-W-H 2.800 x 1.880 x 3.230 mm
weight 10.600 kg
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.