Kverneland optima buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
pressure 65 t square edge steel 45,0 mm L-beam 80 x 10 mm Eqo2vyjny Punching capacity 30 in 17 mm shear: flat material 150 x 17 mm round bar steel 50,0 mm weight 2550 kg more
1

Postpress POLYGRAPH Optima

St.Leon-Rot bei Heidelberg Germany
6595 km
USED
Machine type: Optima Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: Available from: Immediately available Gxsnnft Machine is: creasing and perforating machine with the existing accessories more
3
Dough and knitting machine Bread roll with 3 ingredients TAS system Stand 30 pieces Weight range 30-93 g = 900-2800 g Bxrqnqwm for round and square buns Stainless steel part knife removable Dimensions approx .: 650 x 670 x 1490 mm WxDxH Connection 400 V, 1kW, 16A-CEE connector more
3
grinding length:500 mm grinding width:275 mm workpiece height:375 mm table load:250 kg grinding spindle drive:3,7/4,5 kW Megwj weight of the machine ca.:3000 kg Used / overhauled surface grinding machine ELB Make, type5275 Optimal ND Machine number 206310590 Overhaul scope: Machine completely dismantled, cleaned all components thoroughly and tested for complete functionality. All guideways new eingeschabt on Neumaschinengeometrie. Spindle runout less 5µ. Wear parts replaced defective compon... more
6
Catalog No 3829 Equipment: - a plate - pre-cutter - plate milling - glue tank, hot melt adhesive (granules) additionally glue roller - heated tape strip - guillotine - pre-cut veneer - 3 pressure rollers - 2 ball cutters Bxrz0ntn - 2 milling cutters for edge shaping (radial cutters) - aggregate to make corners (milling) - cyclins - to remove excess glue Polishing machine Application: - machine designed for machining PVC / ABS rim - veneer up to 3mm thick and wood stickers up to 9mm thick - max ... more
3
grinding length:500 mm Rotckdc grinding width:250 mm workpiece height:375 / 430 mm magnetic plate size:500 x 250 mm table surface area:950 x 300 mm table speeds:1000 - 30.000 mm/min dimensions of grinding wheel:300 x 50 x 76,2 mm total power requirement:8 KW oder 25 A dimensions of the machine ca.:2,45 x 2,0 x 2,3 m weight of the machine ca.:2.550 kg more
6
Grader OPTIMATIC type RMO 860, car mash bandsaw sheet straightening machine. Bajlerswo7 more
1
wide belt sander for calibrating, fine sanding, lacquer sanding 1. aggregate - steel roller: with sanding grain equilibration and autom. on/ off for calibrating, 2. aggregate - combined sanding aggregate with: rubber roller, 65° Shore with sanding grain equilibration and autom. on/ off for fine sanding, as well as electronic controlled, segmented EPS sanding pad (25 mm segment width) 3. aggregate - cleaning brush - autom. star/ triangle start up - autom. sanding belt brake - sanding belt... more
3
Travel X / Y / Z 350/250/300 mm Bae8rjlpde Table size 560 x380 mm C-axis 6-fold tool changer Hirschmann clamping system extinguisher more
3
frequency-controlled rotary compressor 0gbxcefb Manufacturer: Mattei Model: Optima 45 H Bu. 2002 Quantity: 6.0 m ³/min Pressure: 7 -10.5 bar E-motor: 45 kW Hours: 59000 Dimensions: Lxwxh = 1830 x 1000 x 1760 mm Weight: 1060 kg more


kverneland...
every day

New machines via email!

Be informed!
6
CATALOG NO. 3830 PRODUCT FEATURES A unique strength of the edge bander which consists in carrying out a perfect racjonalinej and finishing a variety of profiles in one working run. Applications: - machine adapted for edge processing PVC / ABS - veneer to 3 mm thickness and of wood strips up to 9 mm thick ADVANTAGES - German production M7fjt - Unpainted - year 2001 - the original documentation manuals - perfect condition - bander used - high quality low price TECHNICAL DATA Equipment:... more
6
FULL swing frame gate GDZ-71 stroke 600 mm with hydraulic width adjustment, RIVING knife. STRONG STILTS, ALTSHAUSEN DISMANTLED EUR 26 000.--+ VAT FROM STOCK Wntnvwmip more
6
- X: 350 mm - Y: 250 mm - Z: 300 mm - electrode changer: 6-fach - table size: 560 x 380 mm - generator: 60 A - machine weight: 2400 kg - dimensions (L x W x H): 2 x 2.35 m - feed max. 1000 mm / min Mzuv2 - Bowl 625 x 400 mm - 60 l, 380 v - tensioning system Hirschmann - Accessories: 6 shots, fire extinguisher more
5
Number 27-01-152 Manufacturer HYMO Type Optima EAX 700 Machine data Year of construction: 2000 L x W x h: approx. 4000 x 1000 x 1000 mm Weight: approx. 400 kg Very good condition Technical data Ingcqj9 Hydraulic lifting table Load capacity: approx. 700 kg Platform: approx. 1200 x 800 mm Stroke: approx. 800 mm Height: approx. 200 mm Lifting time: 15 seconds incl. Workbench Length: 3000 mm incl. drawers & trays Hydraulic unit built in work bench Can be o... more
6
double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 79sh8ptbc 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as see... more
5
4 compartment composite shear manufacturer: Muhr and Bender Type: KLB-6530 Optima Technical data: Punching pressure 42.3 MP -Punch: No.: 0133178605111 Cta9hcht Voltage 220/380 3-phase 50 Hz Control voltage 220V Throat depth 400 mm Table size 550 x 400 mm Notchers Table size 400 x 320 mm swiveling on slewing ring Feed rollers for bar steel cutter 20 mm diameter with electrical pneumatic material feed approx. 4 m more
6
-X = 2750 mm 8gchnb0k8 -Y = 1000 mm -Z = 140 mm (infrastructure) -vertical gearbox with 18 spindles, individually available -horizontal drilling gear with 4 spindles -Nutsaege 90 degree swivel -Main spindle 7.5 kW -6 x tool changer -Control "Homatic / Woodwop 2.5" more
6
Sandwich press Eberhardt Manufacturer: Eberhardt Type: Optimat 634 380 v / 50 Hz / 0,75 kW 3 x serving slices with it 8jgzylnin Tested and cleaned When the Baker See detail BB´s image Article Nr: BT03051701 No.: We have a large assortment of bakery machines. more
4
Working table 3250 x 1300 mm X - 3250 mm, Y - 1300 mm, Z - 100 mm, C 360 ° Speed ??range: X- 80 m / min, Y- 60 m / min, Z -20 m / min Traverse table 8 support beams pneumatically slid in the X axis, each with 3 suction cups, Becker vacuum pump 3 kW 100 m3 / h Lifting workpieces on brackets Handles for narrow elements 2 pcs Laser pointer for positioning positioning Central lubrication and suction Front protection mat, side guards, rear mat Programming woodWOP 4.5; Hand-operated terminal Drilling ... more
4
Grinding range 800 x 350 x 375 mm Electromagnetic Chuck 800 x 350 mm Pole pitch 6 mm Hand lever dressing apparatus Coolant system with paper band filter Czmqxvn3k Machine on body elements various wheels and flanges more
4
We offer: Used centering, Tailstock contact following stored bearing manufacturer: unknown name on tools: DRP 508 726 Type: Optima4 No .: 24269 Length: 220 mm diameter max .: 85 mm diameter grains max .: 25 mm diameter intake min. 25 mm MK 3 Weight: 2,5 kg Condition: good, ready for use Note the actual item on offer: Our house recovered assets from resolutions and insolvent companies. With every purchase of our Terms and Conditions (any warranties or guarantees, retention of title as eg transfer... more
6
380 V / 50 Hz / year 1991 0.75 kW / 2.0 amps dimensions: b: 64 cm, t: 57 cm, H.: 132 cm Bs0ztfuyu more
4
- Edge thickness: 0.5-2 mm - thickness of boards: 12-40 mm - temperature of the adhesive: 120-250 ° C - tank capacity: 1.2 l - adhesive preparation time: approx. 25 min 8yzkuxofg - time to change the color of the glue: about 5 minutes - installed power: 2000 W - compressed air pressure: 6-8 bar - dimensions: 1.1 x 1.4 x 1.2 m more
6
Homag Single Sided Edgebander Model Optimat KAL 310/5/A25/S1 2 Pre Milling Units End Trim Rough Trim Fine Trim 18-24 m/min M3o2p Feed Sound Enclosure GREAT FOR DOING SOLID WOOD EDGING!!!! Year 2006 more
6
Edge banding machine Brand: Homag Type: Optimat KL 78/A20/S2 Year: 1999 Panel size: Thickness: 10-60mm min: 10 mm (milling) min: 12 mm (edging) max: 60 mm Profiles/Finishing 1 sided milling 1 sided melamine/kraftpaper edging 1 sided ABS 0.4-1.3mm edging (chamfer milling 20°) Yv2fakmfl 1 sided ABS 1.4-2.0mm edging (radius milling R2) Vertical grooving Total length: approx. 9m Equipment: Precision-cutting, gluing unit with pre-melt for hot-melt, 1x main- and 6x re-pressure rollers, end trim... more
6
GLUEING UNIT TOTALLY CLEANED (see photo) single sided edge banding machine, right-hand machine gluing unit for hot-melt granule automat. rdge magazin Kantenmagazin for rolls and fix length Fhtfrrsj0 end trimming unit 2 motors each 0,18 kW, 200 Hz, 12.000 rpm tiltbale from straight to chamfer 0-15° flush millting unit top and bottem with vertical and horizontal tracing 2 motors each 0,27 kW, 200 Hz, 12.000 rpm scraper unit for PCV-edges tracing from top, bottom and lateral edge thicknes... more
6
Max edge thickness 12 mm, maximum edge height 60 mm, feed 13 m / min, granulated glue station, butting unit with 2 saws, flush milling unit, Eckenrunder, Profilzieklinke, buffing plus return of the plate by the firm of Homag type ZHR15 Mt0ie0 more
1
Technical data Table length 900 mm Table width 250 mm Grinding length 650 mm Grinding width 375 mm ... more
6
Edgebander Brand: Brandt Model: Optimat KD C Year: 2001 Voltage: 380 V three-phase Required power: 16 A Machine equipped with a 12 kVA transformer Overall dimensions: 380 cm x 75 cm x 140 cm Max thickness of room: 4 cm Condition: tested, material in perfect working condition Remark: no on-site lifting equipment, access via a sectional garage door of 320 cm (Width) x 245 cm (Height), the suction hose is not included in the lot Supplied with this lot: edge banding Bajn2skbib more
4
Breitbandschleifmaschine Fabrikat: Bütfering Typ: Optimat SGO 109 Baujahr: 2009 Technische Daten: Arbeitsbreite: 950 mm Bair37aich Bandwechselseite links Werkstückdicken von 3 bis 160mm Schleifbandbreite : 970 mm Schleifbandlänge : 1900 mm 1 kombiniertes Schleifaggregat mit: - einer profilierten Stahlkontaktwalze (160 mm Dm.), mit Körnungsausgleich und automatischer Zustellung zum Kalibrieren - einem pneumatisch abgestützen Druckbalken zum Feinschleifen mit einer Schnittgeschwindigke... more
2
Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizon... more
6
turning diameter 400 mm Dv0hsi turning length 1000 mm control NUM 1060 T x-axis 200 mm z-axis 1000 mm turret 12-fach total power requirement 34 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,5x2,5x2,0 m more
6
Sanding width 1350 mm Workpiece thickness 3-160 mm Workpiece guide By rubberized, spring-run pressure rollers before and after the workpiece detection or before and after the sanding units Workpiece detection Workpiece detection with 25 mm resolution Cross sanding unit Motor 13,5 kW Sanding belt speed 2-16 m/s, frequency controlled, infinitely variable Sanding belt dimensions 150 x 4700 mm Patented CPS 2 system Combined longitudinal sanding unit Motor 15 kW Sanding belt speed 2-18 m/s, frequen... more
3
Type: OPTIMAT KD 68,Baujahr: 1997,Motorfrequenz: 50 Hz, RADIUS scraping unit: Yes, make: Brandt, glue tank, up to 5 mm edge thickness, solid wood, up to 3 mm PVC and ABS, flush milling, RADIUS milling,. Fe7euob more
6
CNC processing centre Brand: Homag Type: Optimat BAZ722/58/16/GA Year: 2005 TECHNICAL DATA: - Workpiece length max. 5860 mm at single processing max. 2680 mm at pendular processing with edge banding max. 2870 mm at pendular processing with milling - Workpiece width - max. 1825 mm for milling processings with tool Ø 25 mm - max. 1700 mm with edge banding - max. 1600 mm for all units -processing of unusual widths possible - Workpiece thickness - max. 60 mm with standard clamper at use of gluing... more
6
Manufacturer: Busselato , Type: Jet Optima, Year: 2010, Barcode: 5200 X 1300, Maschinensteuerung: 5200, Programming station office: 1600, Work piece width min-max mm: 250, Min.-max. workpiece length in mm: yes, Aluminium processing: 2, Throuh running machine: HSK 63, Feeding speed max m/min: 12, Pendulum processing: 1500-24000, Number of milling spindles vertical: 1, Tool adaption system: 18, Milling engine 1 hours power: keine, Kettenwechsler: yes, Working widht max mm: yes, Drill vertical Y: y... more
2
working width 640 mm workpiece width - max. 750 mm bore stroke 100 mm 1,5 kW Wozfs more
6
table length 850 mm table width 530 mm ampere 60 A x-travel 500 mm y-travel 350 mm z-travel 400 mm working-box, inside dimension 900x600 mm workpiece sizes 850x530x445 U/min L3tm9 workpiece weight 1500 kg total power requirement kW weight of the machine ca. 4 t dimensions of the machine ca. 2,4x2,7x3,1 m Swivel head more
6
Facilities Otpmgv2t -Quick-change gluing part workpiece preheating -Automatic edge magazine - Central adjustable upper pressure. -Control Panel on the machine inlet. -Noise protection panelling m. 3 dust nozzle Basic machine -ADJUSTABLE INFEED fence - trimming unit 2 X 2.2 KW - jointing cutter set 42 MM DIA - trimming unit CHAMFER/straight 2 X 0.18 KW - FRAeSAGGREGAT 2 X 0,55 KW against run - FORMFRAeSAGGREGAT up + down arrow 1 X 0.35 KW - scraping unit KDX 400/500-SCHWABBELAGGREGAT 2 m... more
6

CNC Machining Center WEEKE Optimat BP 140

Düsseldorf Germany
6383 km
1997
USED
Offer
Another 2 days
working length x-axis: 3100 mm working width y-axis: 1000 mm c-axis: Ja/Yes tool changer: 8-fach / 8-fold changing unit: nein / no vacuum pump: 100 cbm/h drilling head vertical x-axis: 8 piece drilling head vertical y-axis: 11 piece C0ybm0za drilling head horizontal x-axis: 2 piece drilling head horizontal y-axis: 2 piece saw unit: ja / yes in X control: HOMATIC 2000 IPC software: WoodWOP 4.5 Dimensions (l x w x h) approx.: 6000 x 2000 x 2500 mm Weight approx.: 3500 kg Description: Working rang... more
6
Single sided edge banding machine Brand: Homag Type: KL 76/A3/S2 Optimat Year: 1996 Cgimekfy with workpiece return more
throat: mm Upn8h8uy3 weight - pallet system:4000 kg blade length:150 x 16 mm mm kombinierte Stanze Mubea KBL 80-40 Optima Stanze Loch DM 30mm / Blechdicke 21mm oder DM 26mm / Blechdicke 24mm Winkeleisen 90° 150 x 14mm U - Eisen 220mm I - Träger 220mm Rundstahl 55mm Vierkantstahl 45mm Flachstahl 150 x 16mm Bj 1974 laut Maschinennummer Gewicht ca 4,0to more
6
21 drill 32 mm pitch Drilling horizontally and vertically Passage between the page attacks: 750 mm Pneumatic clamps Clamping height Max workpiece: 100 mm Max hole series position dimension: 300 mm Method are 5 mm drill bit, see Figure Fence: 1,500 mm and 1,850 mm Iwe0cqf Attacks of incidence of Pneumatic connection Connection: 16 A / 380 V On trolley Weight approx. 390 kg Dimensions: 1,530 x 1,000 x 1,290 mm (W x D x H) more
6
Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling typ... more
6
Facilities: -Quick change gluing unit (Quickmelt) for hot-melt glue. -Automatic edge magazine -reinforced before Cap scissors -Central adjustable top pressure -Noise Control Panel Standard unit Assembly -Trimming unit chamfer/straight -Milling unit up and down -Fine / RADIUS milling unit up and down Cpgp2eky -Scraping unit for PVC edges -Buffing unit 2 motors Technical data Edge thickness 0.4-8 mm Roll away 3 x 45 mm Workpiece thickness 8-40 mm Workpiece width of min. 65 mm... more
6
serial number: 0-240-17-3052 cutting length: 4300 mm cutting depth: 4250 mm saw blade protection: 80 mm clamps piece: 6 piece saw carriage speed forward: 0 -150 m/min saw carriage speed reverse: 0 - 150 m/min program fence speed forward: 90 (EU max. 25) m/min air table: 4 main motor: 13,5 kW scoring saw: 2,2 kW control: PC20+ software: Windows / CADmatic 4 total power approx: 20 KW running hours: Stand KW 26 / week 26 - 21887 h Mx9ab Dimensions (l x w x h) approx.: 8500 x 6500 x 2000 mm Weight ... more
4
CNC processing centre Eeegap2 Brand: Weeke Type: Optimat BHC 350 Year: 2003 With laser recognition for the positioning of vacuum succers Technical data: Supporting table: Length: 3750mm Width: 1220mm Workpiece thickness: 50mm Moving route: X-axis: 4310mm Y-axis: 1675mm Z-axis: 135mm Speed: X-axis: 60m/min Y-axis: 50m/min Z-axis: 20m/min Pneumatic: R 1/2" Air consumption: Approx. 100-200 l/min Suction: Supply: 1200 height approx. 2010 Total suction power: min. 3170 m³/h Air speed: min. 28... more


kverneland...
every day

New machines via email!

Be informed!

to

to

Change search
KVERNELAND OPTIMA
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close