Used Lawn Drag for sale (216)

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Chodpfxern Sqhe Aknec Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: ready for operation (used), functionality: fully functional, overall weight: 55,000 kg, shovel volume: 4 m³, Year of construction: 1978, operating hours: 17,500 h, Weserhütte W180 dragline excavator, with Kraz engine, 18 m boom length, 4 m3 bucket, working condition Codpfxowpx Ifs Aknohc

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Chjdpfx Aswm Nd Esknsc

Year of construction: 2015, condition: ready for operation (used), One Tinkap drag finishing machine is available. Tools: 12/cycle, Throughput: approx. 144tools/h, Clamping range: 42mm, Max. tool length: 250mm, Processing heads: 2, Tool holders: 2x6. Documentation available. An on-site inspection is possible. Csdpfx Akszhb E Uonehc

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: Chsdpfjzhr Rhjx Aknjc The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: used, mileage: 112,000 km, power: 130 kW (176.75 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, loading space length: 3,440 mm, loading space height: 1,800 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Beautiful and well-maintained VW Crafter panel van 35 4Motion (all-wheel drive), medium-length high-roof L2H2, with extensive equipment for trades and businesses, e.g. as a service vehicle / workshop vehicle. Workshop / shelving system by Aluca and electrical equipment (details below). Chedpjz I Dkkofx Aknjc All-wheel drive (4Motion / 4M / 4WD / 4x4) Chassis: Reinforced dampers and stabilizers, front and rear Underbody panel for improved drag coefficient (Cd) Tow hitch with 3.0 t towing capacity Mounting rails for roof racks Auxiliary heating / parking heater, programmable and with remote control Seat heating on both sides Climatic air conditioning system with pollen filter Driver assistance systems: - PDC Park Distance Control front and rear, optical + acoustic display - Rear view camera - Cruise control with speed limiter - Front Assist (active) - Hill start assist - Trailer stabilization - Brake assist (HBA) - ABS, ASR, ESP 3 seats, double passenger seat Driver's seat ErgoComfort suspension seat with folding armrests, multiple adjustments: - Driver's weight, seat height, seat tilt, backrest, lumbar support (multiple electrical adjustments) Durable seat covers Composition Colour audio system (touchscreen color display) - DAB / FM radio - USB, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - App-Connect (Android Auto, Mirror-Link and Apple CarPlay) - Voice control (for phone) Multi-function display Plus / on-board computer Electrical package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Marker lights, side Rotating beacon Fog lights with cornering function Trendline equipment Driver and passenger airbags High sliding door, cargo space on the right, with tinted glazing High rear hinged doors, with tinted glazing, heated, windshield wiper, opening angle 270 degrees Wheelbase 3640 mm High roof, medium length L2H2 Truck registration Steering wheel adjustable Rear steps Entry handles on A and B pillars, 2 additional handles included Cargo area equipment: Aluca workshop system (similar to Bott, Sortimo, Würth). Right side: shelving system with storage compartment, drawers (6x), holders for transport boxes (with one box), small parts case (7x). Left side: workbench with vice, storage compartments, drawers (6x) and cabinet compartment. Cargo area partition with window. Wooden floor. Load securing: mounting rails and eyelets. Walls lined with aluminum. Ventilation. LED lighting. Electrical systems: 230V voltage converter. Auxiliary battery. Cargo area dimensions: - Length at the bottom: approx. 344 cm - Length in the middle / at the top: approx. 297 cm / 299 cm - Height approx. 180 cm Serviced according to maintenance schedule by VW, history: 07.2022 / 30,079 km: Oil change 05.2023 / 46,786 km: Inspection + oil change, all-wheel drive coupling + pollen filter + brake fluid 04.2024 / 62,015 km: Inspection + oil change 06.2025 / 90,376 km: Oil change + oil change all-wheel drive coupling + pollen filter + air filter + brake fluid 04.2026 / 105,674 km: Inspection + fuel filter Tires: Winter tires 235/65 R 16 on steel rims with approx. 5/5/8/8 mm tread depth Despite careful processing, input and data transmission errors may occur in the vehicle description including images. Errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, Equipment: documentation/manual, Professional Kongsberg X20 cutting and creasing plotter. This device is extremely versatile and efficient, designed for the production of packaging, POS materials, and the processing of rigid and flexible materials. The machine combines Scandinavian reliability, precision, and flexibility, allowing for quick adaptation to diverse jobs. The unit we have was purchased from a Dutch printing company and was used in the prototyping department. Maximum cutting speed: 30 m/min Acceleration: 3 m/s² Material clamping system: multi-zone vacuum table with a powerful 6 kW vacuum pump, guaranteeing a perfectly flat arrangement even for the most demanding materials. Positioning camera: integrated vision system for reading markers (matching print to cut). The machine is equipped with: - a FlexiHead, which allows for the simultaneous mounting and use of three tools in a single work cycle, without the need for constant replacement. Cjdpjz Egikefx Aknehc - two drag knives: - psaligraphy knife for precise cutting of films and papers - currospeed knife for cutting thick materials, solid and corrugated cardboard - creasing wheels: a set of creasing wheels with a diameter of 26.0mm and different geometries (2pt; 3pt; 4pt), enabling perfect bending of cardboard and carton without fiber cracking. The price of the machine includes a computer with a dedicated control system and i-cut Production Console software, compatible with Artios CAD. The software primarily imports files in pdf, acm, dfx, and ADR formats. The machine is in continuous operation and is regularly serviced by an authorized partner (the last service was performed in January 2026). It is possible to perform tests on customer materials before purchase.

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Cjdpezi R R Nofx Aknohc Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: excellent (used), Aerator for sale Brand: Weibang Chjdpfx Aevftl Seknec Type: GX 160 Year 2021 Weight: 141 kg Mint condition Net price

Condition: used, Riding Lawn Mower ETESIA Type Hydro 124 D Year of manufacture: 2003 Power: 15.5 kW Cutting width: 1240 mm Grass catcher: 600 liters = over 100 kg of grass Turning radius: 1250 mm Travel and working speed: max. 16 km/h 3-cylinder Lombardini FOCS 903 diesel engine Displacement: 916 cm³ Power: 22 HP at 3600 rpm - Water-cooled - Two counter-rotating blades, 65 cm long with a 6 cm overlap - The powerful suction lifts the grass upright before cutting - Central rear discharge - Hydraulic high-tip emptying, controlled from the driver's seat via toggle switch - Electric cutting height adjustment from 44 to 140 mm - Hydrostatic drive with rear-wheel drive via hydraulic motors - Hydraulic differential lock - Hydraulic power steering - Twin hydraulic connections for operation of front-mounted attachments - Adjustable steering column - Hour meter: 1,539 operating hours Overall width: 1,280 mm Length: 2,800 mm Weight: 716 kg Good condition Cjdpfx Akoy Ai Ntenohc

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: TSH 071, overall weight: 44 kg, input voltage: 220 V, input frequency: 50 Hz, Used Pfeiffer TSH 071 “Turbo Cube Drag Pumping Station”, portable turbo vacuum pump Manufacturer: Pfeiffer Model: TSH 071 Cedpoxqprzefx Aknohc Voltage: 190-260V (50/60Hz)

Condition: used, Year of construction: 2004, operating hours: 19,000 h, machine/vehicle number: D35601, The Senzani CM5 is a continuously operating, vertical cartoning machine from Senzani Brevetti, specifically designed for the precise packaging of individual items such as capsules, pouches, or smaller packaged products into pre-glued folding cartons. Machine features: Operating principle: Continuous motion for high process stability. Application: Vertical filling of pre-glued cartons, often combined with counting and dosing systems (coffee or tea capsules, lawn seeds, muesli, or pet food). Integration: Seamless integration into fully automatic primary and secondary packaging lines is possible. The machine operated for almost 19 years at Flechtorfer Mühle, where it was only used to fill one product. After being taken over by a birdseed company, it successfully completed a test run. Following the sale and a longer period without power, a software update from Senzani is necessary, costing approximately €12,000. A metal detector is included in the offer. A pendulum cup feeder can be purchased separately to ensure consistent feeding. Chsdpfx Akozp Iw Honoc

Condition: new, Year of construction: 2021, Stihl 53 cm Gasoline Lawn Mower RM 655.1 VS The STIHL RM 655 VS gasoline lawn mower is not only a true powerhouse due to its durable aluminum housing. With its Vario drive and a cutting width of 53 cm, it is ideally suited for maintaining large areas. The central, seven-stage cutting height adjustment allows you to choose a grass height from 25 to 85 mm. To make your work easier from the start, its engine is equipped with the ReadyStart function, which ensures reliable starting. During mowing, the speed of the powerful engine remains constant, even when changing speed, and its mono-comfort handle ensures easy handling. The blade-brake clutch of the RM 655 VS is also noteworthy, as it disengages the cutting unit when the engine is running, so short mowing breaks do not require restarting the mower. The foldable grass catcher with a volume of 70 liters and a fill level indicator can be easily emptied. With this gasoline lawn mower, you are choosing a reliable companion for your gardening work. Technical data: • Aluminum housing with wear strips • Guaranteed sound power level LWAd [dB(A)]: 98 dB(A) • Weight: 50 kg • Grass catcher volume: 70 l • Displacement: 173 cm³ • Foldable grass catcher with fill level indicator • Comfort handle • Easy-rolling wheels • Blade-brake clutch (BBC) • Engine with easy-start system (ReadyStart) • Engine type: HD775 OHV SC series Cedotvf R Eopfx Aknehc • Mulching function & multi-blade • Rated speed of working tool: 2800 rpm • Rated power: 2.6 kW / 3.5 hp • Lawn area: up to 2500 m² • Cutting width: 53 cm • Cutting height: 20-85 mm • Super-Soft handle • Uncertainty KpA [dB(A)]: 2 dB(A) • Vario wheel drive • Vibration guide handle ahw: 3.8 m/s² • Vibration uncertainty K: 1.9 m/s² • Central cutting height adjustment The lawn mower is new and unused. It was only on display in our showroom and has minor storage marks. The lawn mower cannot be shipped by a parcel service as it is too large and too heavy. Shipping by freight forwarder is possible at your expense. No shipping outside EU. You will receive an invoice with VAT shown. Payment exclusively by bank transfer - NO PAYPAL!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Chedpfozu Rzfjx Aknjc Model / Type: W822-1264 Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Connected load: 1.9 kVA Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Holp Vario Bucket / VL.112.700 / MS10 / HARDOX / Wear Plates / NEW / in stock & immediately available Price: €6,960.00 net / €8,282.40 gross - Excavator size: 14 tons – 25 tons - Weight approx.: 570 kg - Capacity SAE: 700 liters - Angle of repose: 54° - Radius of the bucket bottom: 150 mm - Includes wear plates - The bucket is made entirely of HARDOX. Advantages of the Holp Vario Bucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular construction - Round bottom - Two working openings - Rectangular working opening Cjdpfszwluljx Aknshc - V-shaped - The Vario bucket impresses with its high performance and clean operation. It enables precise pouring thanks to the V-shaped opening and offers very high digging performance in drag mode. Wherever more speed and flexibility are needed to handle a wide range of tasks, the Vario bucket is a real asset on the construction site: it is faster, more adaptable and safer. We have many other Holp products in our warehouse that are immediately available! Please contact us for this at [phone number] / [email address]. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni Teleskoplader sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Tobias Ebert for further information.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6232-07-012, type of input current: AC, total width: 4,100 mm, total length: 4,400 mm, input voltage: 400 V, input current: 380 A, feed length X-axis: 3,200 mm, feed length Y-axis: 3,500 mm, working width: 3,200 mm, total height: 1,400 mm, cutting width (max.): 3,200 mm, cutting height (max.): 3 mm, compressed air connection: 8 bar, Innsbruck, May 19, 2026 Good condition: Used S.M.R.E. SM-320-TA High-Performance CNC cutting plotter (year of manufacture 2012) Are you looking for maximum precision and efficiency for XXL cutting? For sale is a high-performance, industrial conveyor cutting machine from the premium manufacturer S.M.R.E. (SolarEdge Automation Machines). The machine is in very good, ready-to-use condition and is ideal for the continuous processing of technical textiles in large formats. The most important highlights at a glance: Year of manufacture: 2012 Working width: 3,200 mm, table length 3,500 mm – perfect for XXL formats without material division Conveyor system: Robust, multi-layered industrial conveyor belt for automatic, endless material feed Drive & Performance: Powerful 8 kW rated power (400 V) for fast and precise cuts Codpfezuzimex Aknehc Equipment: Vacuum system for perfect material hold, automatic unwinder with precise material guidance correction, and flexible tool heads (including drag/rotary knives and a marking pen). Location: Innsbruck/Austria Perfectly suitable for: Manufacturers of truck tarpaulins, tents, awnings, advertising banners, pool covers, and sophisticated technical products. Take the opportunity to bring your production to the next level with this modern, extremely reliable system. Ready for immediate use! Dismantling and transport of the machine must be organized and paid for by the customer. Technical information: Cutter IBK Cutting window X 3,500 mm Y 3,200 mm Connection values: 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 30 kW 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 15 kW 1 x 230 VAC 50 Hz 200 W 1 x Oil-free compressed air 0.6 MPa 400 l/min Dimensions: Cutter L x W 4,400 x 4,100 mm Unwinder 1 approx. 2,500 x 4,000 mm including material roll Unwinder 2 approx. 2,000 x 4,000 mm including material roll Safety area all around 1,000 mm => Installation area approx. 11 x 6 m + maneuvering/working area Weight: approx. 2.5 tons

Condition: good (used), Year of construction: 1994, space requirement width: 500,750 mm, Coating pan GLATT Type Coater GC 750/500 from 1994 with interchangeable drum, explosion-proof design. Process Equipment: Glatt Coater GC 750 (equipment only used for test runs) Perforated drum with D = 500mm drum and 750 mm drum, with: Inlet and outlet air ducts for both drums Capacity of 750 drum: 50 – 75 kg/batch Capacity of 500mm drum: 15-45 kg/batch Discharging must be done manually Spraying arm with nozzle adapter Spraying system with 1 Schlick nozzle Control cabinet (pneumatic/electrical) with Siemens PLC S5 Air handling unit 7AIR including: With inlet air fan F7 and H12 filtration Preheating Chedpfxezmvqij Aknjc Dehumidification Heating Deduster HERDING Outlet air fan WIP nozzle inside drum and external nozzle

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, color: red, axle configuration: 4x2, operation weight: 753 kg, empty load weight: 753 kg, fuel: diesel, gearing type: hydrostat, Year of construction: 2015, operating hours: 1,350 h, Equipment: differential lock, self-propelled working machine: + Gianni Ferrari + PG280 D + Year of manufacture: 2015 + 1,500 operating hours (according to previous owner) + Hydrostatic drive + 3-cylinder Kubota 902 diesel engine, 898cc, 20hp + High dump + Protective bar + Lighting + Rear-wheel steering Cedpjyyynhjfx Aknohc + Rotary mower deck, 130cm, 2 blades + Unladen weight: 753kg + 800l grass collection container + Differential lock + Municipal vehicle from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and prior sale reserved!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal, with robotic automation Manufacturer: DMG MORI Type: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: Machine 2017 / Automation 2021 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Chedoz A A E Nspfx Aknoc Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter - Tank 600 l - Canopy - Rotary feedthrough in spindle center - Compressed air through the spindle center - Flushing gun - Oil and emulsion mist separator, mechanical - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Operating mode 4 - ATC – Application Tuning Cycle - Tool breakage monitoring TRS2 (if available) - Tracy surface interpolation - Automation system Lang RoboTrex 52 Accessories, tools, and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, mileage: 670,688 km, power: 185 kW (251.53 HP), first registration: 11/2006, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,740 mm, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2006, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, According to our “General and Special Terms and Conditions”, without any guarantee or warranty, we are pleased to offer you, subject to prior sale, errors, and misprints, the following vehicle, non-binding until final contract conclusion: Iveco 120E25 Curtain Side/Flatbed with Tail Lift (Vehicle 32) First registration: 16/11/2006 676,688 km Engine: 5,880 cc 185 kW / 252 hp Euro 5 EEV TÜV (roadworthiness): 08/2026, SP (safety inspection): 02/2027 Overall dimensions (L x W x H): 9,100 mm x 2,550 mm x 3,740 mm Internal load space: approx. 7,200 mm (L) x 2,480 mm (W) x 2,600 mm (H) Side panels: 2x foldable per side, approx. 600 mm high Tail lift: Palfinger, mounted at rear, 1,500 kg lifting capacity 3 rows of wooden stake slats Ringfeder trailer coupling Leaf/air suspension Tyres: 265/70R22.5, front approx. 40/40%, rear approx. 50/50% Roof spoiler Foldable A-board Chock 3-seater cab 8-speed manual transmission 2 x electric windows, electric mirrors, heated mirrors Cedpfxszh Sg Ns Aknjhc Manual sunroof Radio/CD Hands-free telephone system Reinforced engine brake Chilled compartment, front, passenger side Replacement gearbox fitted in 2024 Drag link, track rod, and ends renewed in 2025 Price: €4,000.00 (net) All details are provided without guarantee or warranty. Our “General and Special Terms and Conditions” apply. For both parties, the court of jurisdiction up to a dispute value of €10,000 is the District Court Ludwigslust; for higher amounts, the Regional Court Schwerin applies. Subject to prior sale, errors, and misprints.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Chsdpfxjz A Ap Ij Aknoc Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2018, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 59768, Equipment: documentation/manual, Rethink Robotics Sawyer Robot (Year 2018) – Collaborative 7-axis industrial robot Chodpfx Ajx Ac U Teknjc - 7-DOF cobot with safe force sensing / force control - Controller included, pedestal (approx. 930 mm height) for standing workstations - Integrated Cognex image processing + Cognex vision system - Cognex Vision + ClickSmart & EOAT adapter plates (included) - Robot platform with Intera 5 software Collaborative use without safety fencing, intuitive drag-and-drop programming Robust, flexible manipulator for research, automation, assembly, and pick-and-place applications Payload: 4 kg, Reach: 1,260 mm, Repeatability: ±0.1 mm Accessories: - Basic adapter plate for basic grippers End Of Arm Tool (EOAT) detachable mounting plate for attaching the gripper (electric or vacuum) to the Sawyer robot - ClickSmart adapter plate – robot side End Of Arm Tool (EOAT) detachable mounting plate for attaching ClickSmart grippers (vacuum & pneumatic) to the Sawyer robot - 16-fold gripper Gripper with 16 custom holders for cups (60 g) specified by the customer, dimensions approx. 600x400 mm

Condition: used, mileage: 93,000 km, power: 130 kW (176.75 HP), first registration: 07/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 6,154 mm, total width: 2,040 mm, loading space length: 3,440 mm, loading space height: 1,920 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Beautiful and well-maintained VW Crafter panel van 35, high roof, medium length H2L2, with extensive equipment, ideal for trades and businesses, e.g. as a service vehicle / workshop vehicle. ALUCA workshop / shelving system with 2kW voltage converter (details see below) Extensive electrical systems (voltage converter, etc., see below) Trailer hitch with 3.5 t towing capacity 3.5 t gross vehicle weight Suspension: Dampers and stabilizers reinforced, front and rear Underbody paneling with low drag coefficient (Cd value) Auxiliary heater, programmable and with remote control Seat heating for driver and passenger seats Climatic air conditioning system with pollen filter Driver's seat: ErgoComfort spring-suspended seat, foldable armrests, multiple seat adjustments: - Driver's weight, seat height, seat tilt, backrest, lumbar support (electrically adjustable) Passenger seat adjustable: backrest Seat upholstery fabric Driver assistance systems: - Rear view camera - Cruise control with limiter function - Hill start assist - Trailer stabilization - Brake assist (HBA) - ABS, ASR, ESP Audio-navigation system Discover Media (touchscreen color display) - Navigation with TMC - Radio (FM / AM), CD player (CD player and SD card slots in the glove compartment) - USB, AUX-in, SD card, Bluetooth audio - App-Connect (Android Auto, Mirror-Link and Apple CarPlay) - Hands-free system for mobile phone with Bluetooth - Mobile online services Car-Net - Voice control (for radio, navigation, media, telephone) Multi-function display Plus / On-board computer Electrical package: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Low beam headlights retrofitted with LED light sources Fog lights with cornering lights Side marker lights Rotating beacons (2) Trendline equipment Front airbags for driver and passenger High rear wing doors, opening angle 270 degrees, with tinted and heated windows, wiper system Sliding door, high, cargo area on the right, with tinted window Wheelbase 3640 mm Truck registration VAN Steering wheel adjustable Rear step on the right Entry handles on A, B and C pillars Heat protection glazing Tire repair kit Cargo area equipment: Aluca workshop installation (similar to Bott, Sortimo, Würth). On the right side, shelving with storage compartment, drawers (6x), holders for transport boxes (7x, without boxes), drawers for small parts cases (without cases). On the left side, workbench with vice, storage compartments, drawers (6x) and cabinet compartment. Cargo area partition with window. Wooden floor. Load securing: lashing rails and eyelets. Walls covered with aluminum. Ventilation and air extraction. LED lighting. Electrical systems: 230V/2kVA voltage converter/inverter COTEC with 2 x 230V sockets in the cargo area and 1 x 230V connection in the driver's cabin. Protected by circuit breakers and with an insulation monitor. Built-in battery charger for charging the auxiliary battery with external 230V connection. Auxiliary battery with separating relay. Battery charger and voltage converter are located under the passenger seat. 2 x 12V sockets. Cedpfjz Hc N Nex Aknehc Cargo area dimensions: - Length bottom: approx. 344 cm - Length middle/top: approx. 318 cm / 320 cm - Height approx. 192 cm Service booklet maintained by VW, history: 11.2021 / 19,881 km Oil change 06.2022 / 30,375 km Inspection 12.2022 / 40,597 km Oil change 05.2024 / 61,120 km Oil change 05.2024 / 61,125 km Inspection + brake fluid + pollen filt

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6234-05-013, Equipment: CE marking, type plate available, I am offering a used S.M.R.E. (SolarEdge) cutting plotter designed for tracing and cutting acrylic and synthetic fabrics. The machine is equipped with 4 heads, including 3 drag knife heads (2 rotary blades for different material thicknesses, a finger blade) and a plotter pen. Main parameters: Cedpsxcvt Asfx Aknohc - table width: 3200 mm, - rated power: 8 kW, - supply voltage: 400V, - max. roll diameter: 800 mm, - automatic roll feeder with material guiding correction, - manufacturer's software for pattern design, - vacuum fan for holding down the material on the worktable. The machine is fully functional and still supported by manufacturer's service. It remains connected to power and is in active operation.

Condition: good (used), Manufacturer: Easy-Link Chsdpfshyw N Ssx Aknsc Overall dimensions: 2400 x 700 x 2300 mm Box size: 700 x 760 x 500 mm Belt size: 2700 x 190 mm