Used Liebherr L 509 for sale (234)

Condition: used, Year of construction: 2010, operating hours: 7,900 h, Equipment: all wheel drive, Liebherr L 514 P (Parallel linkage) Cjdpfx Akoz Hhrvstori Stereo loader (articulated steering + rear axle steering - extremely maneuverable!!!) Without particulate filter and without Adblue!!! Chassis number VATZ1115JZB 0025394 Year of manufacture 2010 Operating hours according to meter 7996 P-linkage with parallel guidance Power 72 kW, 98 hp, total weight 10500 kg Equipment: * Hydraulic quick coupler * Automatic central lubrication system * 4 work lights at the front on the cab roof * Radio preparation * Engine air intake with pre-separator TOP-AIR * Rotating beacon (flashing light) at the rear of the cab - center * Rear view camera with separate monitor * Main switch for electrical system * Road approval possible!!! Hydrostatic drive with 2 speeds - 30 km/h Tires, front 17.5 R 25, 40% good, rear 17.5 R 25, 30% good Width 2400mm Price with quick coupler and bucket 1.6 cbm - 29,900 € Various buckets for this machine in stock, additional equipment available for an extra charge: * Mixing/screening bucket on request * Folding bucket 1.6 or 2.0 cubic meters from 3,250 € * High-dump bucket from 2.0 - 2.5 cubic meters from 3,950 € * Volume bucket 3.0 cubic meters No. 59 - 2,950 € * Screening/mixing bucket - price on request * Pallet fork 5 tons from 2,190 € Other equipment on request!!! All prices are - net price ex works + 19% VAT or export! We can gladly offer you transport to your location. Sales only to commercial businesses or for export. Sold as is, in the condition the machine is in. No guarantee or warranty. The stated mileage or operating hours are read from the mileage or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be considered as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment may need to be checked separately. We will also gladly accept your vehicle as a trade-in. Please do not hesitate to contact us if you have any further questions. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: used, Year of construction: 2017, operating hours: 8,340 h, Great machine! ? Good condition ? No issues ? No oil leaks! VIN: VATZ1265CZB044737 Year of manufacture: 2017 Operating hours: 8350 original hours Liebherr service maintained Special factory paint: RAL 1027 curry yellow 4-cylinder in-line engine, water-cooled with turbocharger, 103 hp Hydrostatic drive with 2 speed ranges - max. 32 km/h * Standard Z-linkage * Ride shock absorber - linkage damping * Quick coupler with hydraulic attachment kit * Central lubrication system, factory-installed Liebherr * 3rd hydraulic circuit for tipping/clamshell/or 4-in-1 bucket * Lamp bracket in steel instead of plastic * Towing hitch, rear * Driver's seat "Comfort" with suspension * Radio Comfort * 2 work lights on the rear of the cab roof, LED * 2 work lights on the front of the cab roof, LED * Adjustable steering column * Rotating beacon - flashing light - cab roof, center * Crane/lashing eyes on the rear and front * Fire extinguisher Csdpeyqn Hlefx Akteri * Road approval 32 km/h * Tires 17.5 x 25 L3 front 2, 95% like new!! * Tires 17.5 x 25 L3 rear 2, 95% like new!!! Permissible total weight approx. 10500 kg, operating weight approx. 8500 kg Offer with quick coupler and standard bucket 1.6 cbm - at a price of 39,900,-- € net, export/domestic + 19% VAT Equipment available at an extra cost: · Folding bucket, 2 cubic meters, from 3,550,-- € · Tipping bucket · Screening/mixing bucket, manufacturer "Wolf" · Pallet fork 5 tons, from 2,190,-- € Prices net + VAT or export Sale only to commercial customers or for export. Sale as is, in the condition the machine is in. No guarantee or warranty. The mileage or operating hours stated are read from the odometer or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of the purchase contract. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment may need to be checked separately. We will also gladly accept your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our customers from abroad, we prepare all customs and export documents for a trouble-free transfer to the country.

Condition: good (used), Year of construction: 1957, functionality: fully functional, total length: 3,000 mm, total height: 2,600 mm, total width: 2,500 mm, overall weight: 6,000 kg, cutting height (max.): 400 mm, Gear hobbing machine, manufacturer: LIEBHERR, type: L 300, year of manufacture: 1958, max. workpiece diameter: approx. 300 mm, spindle: MK4, net price €16,000 (negotiable) Crode Aapgzepfx Aktei

Condition: good (used), functionality: fully functional, power: 54 kW (73.42 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, tire size: 405/70R20, tire condition: 95 %, Year of construction: 2005, operating hours: 8,034 h, machine/vehicle number: VATZ0779CZB013487, Equipment: all wheel drive, hydraulics, LIEBHERR L509 wheel loader Year of manufacture: 02/2005 Hours: approx. 8,034 Tires: 405/70R20 / 95% good Weight: 6,750 kg 3rd circuit Quick coupler Available at an extra cost: bucket, pallet fork, and folding bucket, snow plow. Very good overall condition! Austrian documents available. Cedpfx Aoum Dv Hekteri The machine is located on our premises and can be inspected at any time. For further questions and information, please contact us.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Crjdpfx Aj Ahkw Hoktji Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: used, Year of construction: 2005, operating hours: 6,784 h, LIEBHERR L 506 Wheel Loader Cjdpfx As Aat Hljkteri Year of manufacture: 2005 * Quick coupler * 42 kW * Max. speed: 20 km/h * Total weight: 6,300 kg * German machine

Condition: used, Year of construction: 2010, max. wheel diameter 800 mm max. module 20 Codpfj Afar Sex Aktori Control SINUMERIK 840 D table rotation speed 50 U/min table load 95 kN Size of table plate 700 mm table bore diameter 250 mm Axial travel 1000 mm pivoting angle +/- 35 Grad 450 U/min tangential travel max. 320 mm tool diameter 315 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,30 x 5,00 x H3,80 m

Condition: used, Year of construction: 2013, operating hours: 9,710 h, One of the last models without a particulate filter: Liebherr L 542 Z 2plus1 Only used for light work on paved surfaces? No construction site! German machine! Machine delivered on January 15, 2013 – produced in 2012 – therefore still without a particulate filter! Excellent machine – technically and visually well-maintained – All services performed at Liebherr – last recorded on October 8, 2020 at 8678 hours Chassis No. VATZ0435TZB032052 Year of manufacture 2013 Operating hours approx. 9710 Liebherr 4-cylinder inline engine, water-cooled with turbocharger Emission level III, 142 hp with 6.9 liters displacement (Liebherr engine type 934) * BSS hub damper, driving vibration damper – vibration damping * 3rd hydraulic control circuit for tipping bucket, sweeper, grab bucket, etc. * Air conditioning * Central lubrication system – factory installed by Liebherr * Reversing warning device, audible (beeper) * Engine air intake via pre-filter TOP-AIR * Comfort driver's seat with pneumatic suspension * Steering wheel adjustable in inclination Cjdpfxoz Rh Rhj Aktjri * 4 work lights on the front of the cab roof * 4 additional lights on the rear of the cab roof * 2 additional lights on the side of the cab roof * Protective grille for headlights at the front * Radiator with coarse mesh for easier cleaning * Fluff filter in front of the radiator * Reversing fan to blow out the radiator (fan is reversible) * Pre-installation for rotating beacon, yellow light, on the top center of the cab * Battery disconnect switch * Radio pre-installation * Road approval Permissible total weight approx. 17,000 kg, unladen weight approx. 15,000 kg Hydrostatic drive with 3-speed transmission Tires 20.5 x 25 L3, front, 50% remaining, Michelin Tires 20.5 x 25 L3, rear, 40% remaining, Michelin Offer with permanently mounted bucket, 2.8 cubic meters, for the price of €43,900.00 net Optional equipment available at an additional cost: * Hydraulic quick coupler €3,550.00 including replacement of the permanently mounted bucket with a quick-coupler bucket * Tipping bucket from 3.0 cbm to 5.5 cbm from €4,950.00 * Bucket with undercarriage for quick coupler, 3.0 cubic meters from €3,660.00 * Volume bucket, 4 cubic meters, €4,500.00 * 4-in-1 bucket, 2 cubic meters, on request * Pallet forks, 5 or 8 tons, from €1,990.00 If required, also available with a used scale! Pfreundt WK 50 – €3,950.00 All prices net, export – domestic plus 19% VAT. Sale only to businesses or for export. Sale in the condition as it stands. No guarantee or warranty. The indicated mileage or operating hours are read from the mileage or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We will also gladly accept your vehicle in part exchange.

Condition: used, Year of construction: 2007, max. wheel diameter 1.100 mm max. dia. of teeth cutting 800 mm max. module 12 mm rotary table speeds infinitely variable 12 U/min stroke position adjustment 0 - 600 mm number of strokes (double strokes) 50 - 600 DH/min working spindle speeds 25 U/min workpiece diameter max. 275 mm stroke lenght adjustment 0 - 240 mm total power requirement 64 kW weight of the machine ca. 21 t Codpfx As Afarloktsri dimensions of the machine ca. 7,30 x 5,00 x 3,65 m

Condition: used, Year of construction: 2007, Equipment: all wheel drive, Liebherr wheel loader L 538 2 plus 1 VIN: VATZ0433 HZB018618 No particulate filter - no exhaust gas treatment - Adblue, etc. Year of manufacture: 2007 Operating hours according to hour meter: approx. 11,600 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 142 hp, hydrostatic drive with 3 travel ranges, travel speeds: travel range 1: 0 - 6.0 km/h, travel range A1-2: 0 - 16.0 km/h, travel range A1-3: 0 - 34.0 (40) km/h, machine length: 7,200mm, width 2,500mm (depending on the bucket), height 3.28 meters * 3rd hydraulic control circuit (for silo block cutter, high-dump bucket, etc.) * Central lubrication system * Air conditioning * Fuel pre-filter * Driver's seat with pneumatic suspension * Ride vibration damper * Reversing fan for blowing out the radiator * Radio (function not checked) * Adjustable steering column angle * Air conditioning * 2 work lights on the rear of the cab roof, LED * 4 work lights on the front of the cab roof Operating weight: approx. 14,000 kg, permissible total weight 16,000 kg Credpfx Aks Adxc Tstsi Tires: 20.5 x 25 VA L3 - 25%, 20.5 x 25 HA L3 - 15% Offer with permanently installed bucket 2.5 cubic meters from EUR 31,500.00 net. Equipment available for an extra charge: * Quick coupler system Liebherr with hydraulic preparation EUR 3,550.00 * 4-in-1 bucket (clamshell bucket, grading bucket) 2 cubic meters EUR 3,950.00 * Volume bucket 3.5 cubic meters EUR 3,990.00 * Bucket with bottom extension from 2.0 cubic meters to 3.5 cubic meters EUR 3,660.00 * High-dump bucket from 2.5 to 5.0 cubic meters from EUR 5,990.00 * Pallet fork 5 tons from EUR 1,850.00 Available with used weighing system! Pfreundt WK 50 at a price of EUR 3,900.00 - all prices net + VAT. Export sales only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are readings from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information it contains serve only to generally identify the vehicle and do not constitute a guarantee in the legal sense. The information provided does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We will also gladly accept your vehicle as a trade-in. We are available to answer any further questions you may have. For our customers from abroad, we prepare all customs and export documents for a problem-free transfer abroad.

Condition: used, Year of construction: 2021, operating hours: 9,000 h, 2021 | Liebherr L 566 Xpower | Used Wheel Loader | 9000 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Crjdpfx Ao Ahn Eboktoi 💰 Buy Now for EUR 129500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 55 inspection points 46 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good-operating and good-looking wheel loader for its hours. There is play in the boom pins and slight play in the articulation pin. Lubrication is good. The engine air filter and cabin filters need to be cleaned. Engine oil is at the minimum level and needs to be topped off. Stall test passed; the machine is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41125 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 011171 LWE, mileage: 457,230 km, first registration: 01/2026, fuel type: diesel, tire size: 13R 22,5, fuel: diesel, brakes: other, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, Year of construction: 1980, operating hours: 11,399 h, Mobile crane Liebherr LTF 1025F Year of manufacture: 1980 Lifting capacity: 25 tons Cjdpfoztr D Sox Akteri Telescopic boom: 24.40 m Approx. 457,230 km, 11,399 operating hours. Diesel engine Manual transmission Crane has been inspected annually. Current DEKRA expert assessment valid until 03/2027. Ready for operation. Inspection possible by appointment. Further information and pictures available upon request.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request. Codpjz E Hx Sjfx Aktjri

Condition: new, Year of construction: 2014, Storage location number: 100539905 Crsdpfx Akjzk Ah Njtji Transport dimensions (L x W x H): 0 x 0 x 0 ---- Pin: 60/60 Axle distance: 340 Stem width: 280 Mounting: SW48 With load hook: 12 tons Location: Passau

Condition: used, Year of construction: 1999, operating hours: 7,427 h, 1999 | Liebherr Lr 632 | Used Tracked Loader | 7427 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 30000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Crodpfx Ao Afaknoktoi 👷‍♂️ Inspected by an independent expert 51 inspection points 34 approved ✅ 17 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41491 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 10 (8) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min Codpfoyv Ipfsx Aktsri tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: used, Year of construction: 2016, Equipment: all wheel drive, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All services performed by Liebherr and documented. Last service at Liebherr on 20.06.2024 at 14,138 hours 4-cylinder inline engine, water-cooled with turbocharging Emission Stage IV, 155 HP Hydrostatic drive with 3-speed transmission, speed limited to 20 km/h, up to 40 km/h possible (currently 36 km/h) Air conditioning!!!! * Automatic central lubrication system (factory-installed by Liebherr) * Rear area monitoring with camera (function not tested!) * Ride control (boom suspension) * Steel lamp brackets instead of plastic * Fuel pre-filter * Climbing aid for easier cleaning of the front windscreen * Opening window in driver’s door * Premium touchscreen display * “Comfort” driver’s seat with pneumatic suspension (with seat heating) * Liebherr control lever (joystick) * Adjustable steering column * 4 working lights on the front cab roof * 2 working lights on the rear cab roof * Automatic bucket return * Reversible fan (for blowing out the radiator package) * Fluff filter in front of radiator package to prevent contamination * Pre-separator for engine intake air (TOP-AIR) * Beacon light preparation rear cab center * Audible reverse warning system (buzzer) Credpsyqn Hrofx Aktei * Radio preparation * Road approval possible!! Tyres 20.5 x 25 L3 – front axle 2 x 30% Tyres 20.5 x 25 L3 – rear axle 2 x 30% Net price with fixed 2.5 cubic meter bucket: €44,900 Available for extra charge: • Hydraulic quick coupler: €3,550 • High-volume bucket 4 cubic meters: €4,500 • Pallet fork 5 or 8 tons from €2,190 Available optionally with scale, e.g. used Pfreundt WK50 - WK60 scale from €3,900 All prices + 19% VAT or for export. Sale only to business customers or for export. Sold as seen, in as-is condition. No warranty or guarantee. The stated kilometer or operating hour readings are taken from the meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer; the information provided is not to be considered guaranteed features. The description and information are for general vehicle identification only and do not represent a warranty in the sense of purchase law. The information does not claim to be complete. The details/descriptions and images are non-binding and not guaranteed features. Only the specifications in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately.

Condition: used, Year of construction: 2005, operating hours: 8,592 h, Equipment: all wheel drive, Just arrived! Liebherr 524 - excellent machine for storage operations!!! No particulate filter - no AdBlue - no exhaust gas treatment!!! TOP Chassis number: VATZ0438AZB013004 Year of manufacture: 2005 Recorded operating hours: 8592 Liebherr 4-cylinder inline engine, water-cooled with turbocharging and charge air cooling, 86 kW - 118 hp, Version: 33 km/h - hydrostatic drive with 2 speed ranges * Air conditioning * 2 additional headlights on the front of the cab roof Csdpfj Ad Ta Hox Aktjri * 1 additional headlight on the rear of the cab roof * Debris screen in front of the radiator * Air intake with pre-separator "TopAir" * Road approval possible! * Tires 17.5 x 25 front, 2 x 50% tread * Tires 17.5 x 25 rear, 2 x 40% tread Purchase price for fixed-mount bucket, approx. 2.2 cubic meters: 28,900.00 EUR net, export/domestic, plus 19% VAT. Optional equipment available at an extra cost: Quick coupler, hydraulic, 3,550.00 EUR * High-dump bucket from 3.0 cbm from 4,950.00 EUR * Bucket with lowering device for quick coupler, 3.0 cubic meters from 3,660.00 EUR * Volume bucket 4 cubic meters 4,500.00 EUR * 4-in-1 bucket 2 cubic meters on request. * Pallet fork 5 or 8 tons from 2,190.00 EUR All prices net, plus 19% VAT. Inspection by appointment only! Sale only to commercial businesses or for export. Sale in "as is" condition, as the machine stands. No guarantee or warranty. The indicated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle as part of the payment. We are available to answer any further questions you may have. For our customers from abroad, we prepare all customs and export documents for a smooth transfer to their country.

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Attachments and special equipment: - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast - 4 Michelin tyres 23.5 R25 XHA*L3 - Quick coupler Crodpoy Dt A Tsfx Aktoi - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor - German/Luxembourg version - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Sale is made without warranty and liability.

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm Crodpfx Ajymf Daektsi

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, position of the milling head: Schwenkbar (50°), table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, rotational speed (max.): 360 rpm, rotational speed (min.): 18 rpm, distance table to spindle center: 500 mm, tool diameter: 215 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. Crjdpoz Et N Rofx Aktoi The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: used, Year of construction: 2021, operating hours: 810 h, Attachment 1 (manufacturer, cutting width, etc.): 2880 mm with teeth, 3.4 cbm Automatic lubrication system: Yes Operating weight: 21000 Emission class: Emission class 5 EPA approval: Yes Maximum speed: 40 Lift arm kinematics: Z-kinematics Joystick control: Yes Air conditioning: Yes Engine: Liebherr D 934 A 7 Tire brand: Good-Year 23.5 R 25 L 3 Rotating beacon: Yes Other extras?: Immobilizer Additional headlights: front + rear Csdpj Adxwksfx Akteri Condition of rear tires: like new Condition of front tires: like new Optical condition: like new Technical condition: good ---- Air conditioning Radio Goodyear TL-3A+ L3 23.5R25EM Lift arm (Z-kinematics) 2700mm Includes bucket Rear view monitoring

Condition: used, power: 130 kW (176.75 HP), color: orange, overall weight: 29,100 kg, number of seats: 1, Year of construction: 2010, operating hours: 16,630 h, Equipment: additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, Adjustable boom Quick change device Crodpfxsv Ak Hze Aktsi 600 chains Errors excepted

Condition: used, Year of construction: 2011, operating hours: 12,987 h, Equipment: all wheel drive, Internal vehicle number: MK300045 Available immediately at our yard in Kaufungen. More information: Cedpfozri Dgox Akteri ? Luis Lucena ? Viktoria Sologubova Liebherr A 904 C Litronic Wheeled Excavator | 20 t | 12,987 Operating Hours For sale: a used Liebherr A 904 C Litronic wheeled excavator, manufactured in 2011. The machine is equipped with all-wheel drive and a quick-coupler system. With an operating weight of 20,000 kg, this wheeled excavator is ideal for earthmoving, civil engineering, demolition, and material handling applications. Technical specifications: * Manufacturer/Model: Liebherr A 904 C Litronic * Machine type: Wheeled excavator * Year of manufacture: 2011 * Operating hours: 12,987 hrs * Weight: 20,000 kg * Drive: All-wheel drive * Quick-coupler system * Environmental badge: 4 (Green) * Vehicle number: MK300045 * Condition: Used * German machine Inspection is possible by prior arrangement. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. Financing example: * Internal number: MK * Purchase price: €42,900.00 * Down payment: 10% * Term: 60 months * Monthly payment: €604.02 * Residual value: €9,380.00 If you are interested in this offer or would like to tailor it to your needs, please contact Mr. Enchev. We look forward to hearing from you. Subject to errors. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2015, operating hours: 7,006 h, Internal vehicle no.: G400306 Available immediately at our yard in Kaufungen For more information, please contact: Luis Lucena Viktoria Sologubova Vehicle number: G400306 Machine: Liebherr R922 SLC Litronic * Hydraulic crawler excavator * Year of manufacture: 2015 * Operating hours: 7,006 h Engine & Drive: Diesel engine * Power: 105 kW (143 hp) * Track chassis with steel bottom plates Weights: Operating weight: 23,600 kg Working equipment: Hydraulic excavator boom with dipperstick * Deep-excavation bucket with smooth cutting edge * Quick coupler * Hammer hydraulics with separate activation Cab & Equipment: Enclosed operator cabin * Air conditioning * Rearview camera with monitor display * Color display with operating data display * Joystick control * Adjustable driver's seat with armrests * Roof glazing * Windshield wiper * Exterior mirrors Financing example: Internal number: G400306 * Purchase price: 54,900.00 EUR * Down payment: 10% Credpfj Aa E Hwox Aktji * Term: 60 months * Monthly rate: 849.02 EUR Residual value: 10,380.00 EUR If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing can be arranged directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.