Used Magnet for sale (1,951)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT. Podpfxszfi A Aj Adxorc

Condition: good (used), functionality: fully functional, Manufacturer unknown Type: 211 – 25/26 No. 89899 Power: 220V Table length: 250 mm Table width: 260 mm Height: 135 mm Weight approx. 25 kg . Prodezzlm Njpfx Adxec

Condition: excellent (used), Magnet dimensions: 60 x 20 cm, working area: 22 x 65 cm Podpfx Aey Ittgedxerc

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Grundfos motor 0.55 kW -Flow volume: 3m³/h -Container with level indicator and magnetic switch Prsdpfx Aowupr Sjdxjc -Dimensions total: 550/530/H600 mm -Weight: 43.4 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. ! Price per unit ! Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Height: 360 mm Weight: 81 kg Inlet: DN 20 Outlet: DN 15 Prodpfx Aewncv Rodxjc ! Price per unit !

Condition: good (used), Year of construction: 2005, Electro milling magnet manufacturer: SAV Type:243.77-960X485 Year 2005 with control transformer. Pedjwnpkbopfx Adxerc Dimensions: 960 mm x 485 mm Height 100 mm Weight approx. 250 kg.

Condition: ready for operation (used), * Brand: Wagner * Length frame: A-A = 2600 mm * Beltwidth: 1200 mm * Driving: 3 kW gearbox Prjdsywm T Sspfx Adxsc * Dim. Block: 1600 x 1100 x 600mm * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Bakker Magnetics Pedpfx Asywnc Ujdxjrc * Model: permanent magnetic block * Type: Neodymium * Dim. block: length 1150 mm, width 180 mm, height 80 mm.

Condition: used, 10-position digital magnetic stirrer without heating, designed for synchronous stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. Speed remains constant, even when load changes Specification: Stirring speed: up to 1200rpm Stirring capacity: 400ml per position Dimensions – 19 x 57 x 6cm (w x d x h) approx Weight – 5kg Good working condition. Please check out our other listings as well. Podoylwcxepfx Adxjrc

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Cross feed 0.1 – 20 mm Cross travel 900 mm/min. Pjdeizka Ijpfx Adxsrc Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding motor speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent retraction • Electro-magnetic clamping table L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 grinding wheel with flange • Control panel • Lighting • Coolant system with band filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1992, Table surface area: 1850 x 710 mm Permissible table load: 3000 kg Travel ranges: Longitudinal, automatic (X): 1600 mm Lateral, automatic (Y): 710 mm Vertical, automatic (Z): 850 mm Spindle mounting: SK 50 Speed range: 20 - 2500 RPM Main motor power, AC: 15 kW Transport dimensions L x W x H: 3650 x 2300 x 2700 mm Weight: 9400 kg Accessories / Special features: • CNC path control system, manufacturer HEIDENHAIN, model TNC 360 with 3 scales • Programming language "Plain text dialog" and DIN-ISO • Electronic handwheel HEIDENHAIN HR 330 with magnetic holder • 3D probing system HEIDENHAIN TS 120 • Main spindle compact unit RAC 3 • Control system prepared for 4th axis • Universal milling head system "HURON" with 2 levels, gears run in an oil bath • Hydraulic tool clamping • Coolant system • Central lubrication with interval • German electrical system, drives INDRAMAT • Operator control panel • Operating manual - Newly refurbished milling head, partially overhauled with new gears, seals and bearings - Oil dispenser for central lubrication renewed Operating hours: 10,032 Psdpsttamksfx Adxerc Program runs: 3,288 Spindle ON: 2,569 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Rapid traverse yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel Prsdpfef Um Raox Adxsc • Machine alignment elements Note: o Hydraulic cylinder for table stroke newly sealed o New filters in the hydraulic unit o Handwheel adjustment for transverse stroke newly mounted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm Psdpfxju Ngics Adxerc total power requirement: ca. 4,0 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: -3x support feet -machine lighting accessories: -alignment device for grinding wheel holder *

Condition: used, Year of construction: 1984, Technical details: grinding length: 500 mm grinding width: 250 mm workpiece height: 250 mm table surface area: 530 x 200 mm magnetic plate size: L:460 x B:150 x H:87 mm table speed: 2 - 32 m/min table adjustment: Längsweg: 550 mm table adjustment: Querweg: 300 mm feed of spindle: 0,001 mm/Hub grinding spindle speed: 3.000 U/min dimensions of grinding wheel: max. Ø 250 x B:25; Bohung Ø 76 mm total power requirement: 4,3 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,3 x 1,8 x 2,2 m Pedpeu Ngkyefx Adxorc dimensions of hydaulic: L: 500 x B: 480 x H: 680 mm dimension coolant device LxWxH: 0,65 x 0,45 x 0,8 m The machine is currently equipped with a grinding wheel Ø 240 x 22mm. On the table there is a permanent magnet plate with 30 induction fields, operated by a hand lever. Operation via swiveling control panel. no dressing device incl. oil collecting tank; grinding wheel holder and available documentation *

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,600 kg, type of input current: AC, input voltage: 400 V, 4 x Wagner Permanent Magnet Separators – various models Pjdpsz R Sw Hefx Adxsrc A total of 4 used permanent magnet separators from the manufacturer Wagner Magnete are for sale. The magnetic separators were used in our recycling and processing plant and serve to automatically separate ferromagnetic components from different material flows. Due to the restructuring and upcoming reconstruction of our recycling plant, the four magnetic separators are being offered for sale. Technical data of the 4 magnetic separators: Magnet 1: - Manufacturer: Wagner Magnete - Type: 0452-115/130-250 G2 - Equipment number: 546235 - Weight: approx. 2,600 kg - Motor power: 3 kW Magnet 2: - Manufacturer: Wagner Magnete - Type: 0452-115/170-250 G2 - Equipment number: 546236 - Weight: approx. 3,340 kg - Motor power: 3 kW Magnet 3: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546237 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Magnet 4: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546986 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Further technical specifications (all 4 magnetic separators): - Belt speed: 1.5 m/s - Motor manufacturer: SEW - Operating voltage: 400 V - Current type: Three-phase (AC) - Frequency: 50 Hz - Protection class: IP55 Condition and sale: All four magnetic separators are in used condition and show corresponding signs of wear and tear due to operation. The magnetic separators can be purchased individually or as a complete package. An on-site inspection is possible after prior appointment. Technical documentation is available. Price upon request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm Prodpfxevbgr Rs Adxoc grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Year of construction: 1978, condition: used, Technical details: lifting capacity: 3,2 t span width: 3700 mm height of hook: 850 mm Podju Nvfgepfx Adxjrc weight of the machine approx.: 260 kg space requirements of the machine approx.: L:3,8xB:0,3xH:0,9 m Hoist Traverse with two magnetic lifter Hoist: - hook distance: min./max. 1500/3700mm magnetic lifter: - Make /Type: Tecnomagnetc /MAXX 1000 - Italy - YOM.: 2001 - lifting capacity: 1000 kg - empty weightt: 36 kg - grip surface: 285x110mm *

Condition: used, Year of construction: 1973, Technical details: grinding length: 400 mm grinding width: 200 mm workpiece height: 300 mm dimensions of grinding wheel: 275 - 315 mm magnetic plate size: 400 x 200 mm Prodpfexu Dv Ajx Adxjc max. table load: 200 kg weight of the machine ca.: 1,6 t dimension machine xH: 1,55 x 1,45 x 2,20 m

Condition: used, mileage: 20 km, power: 96 kW (130.52 HP), first registration: 05/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,704 mm, total width: 2,474 mm, total height: 2,759 mm, loading space length: 4,073 mm, loading space width: 1,784 mm, loading space height: 2,025 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 4174.TZ23.PK64969---- Errors and prior sale are subject to change! SPECIAL EQUIPMENT * Airbag (passenger side) * Package: Technology Package 13 - Heated windshield, rain sensor windshield wipers - Front and rear parking pilot system, additionally with side sensors, active emergency brake assist (radar-based) - Lane Keeping Assist with driver drowsiness warning and automatic high beam control - additional with lane keeping and lane departure warning - Headlight Assist with day/night sensor - Blind Spot Information System, adaptive cruise control, rear view camera - LED downlight, fog lights - Exterior mirrors, electrically adjustable, foldable and heated - Automatic climate control - Ford audio system with 12" multi-function display and Ford SYNC4 * Seat Package 15 - Driver's seat, 4-way adjustable (fore/aft, backrest, seat cushion tilt, height) - Double co-driver seat with storage compartment under individually foldable seat cushions - Headrests, height-adjustable - Tray integrated in the double co-driver seat (foldable) - Seat heating for driver - Seat heating for co-driver - Internal armrest for driver - Lumbar support, manual (driver's seat) - Seat cover: Fabric ADDITIONAL EQUIPMENT * 1 battery * Airbag driver side * Anti-lock braking system with electronic brake-force distribution (EBD) including ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake assist including emergency brake light * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Battery: Programming of the battery runtime to 10 minutes * On-board computer with consumption and mileage information * Roof, high * Double-wing rear door with 256° opening angle, (without window) without rear window, with locking magnets * Power windows front, electric - with quick-up/down function for driver side * Ford Easy Fuel * Generator, high-performance version * Glove compartment with locking lid * Interior lighting with delay function with reading lights in the front * Fuel tank 70 l * Cargo area lighting * Steering wheel: Leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency Call System * Package: Technology Package 9 - Heated windshield - Windshield wipers with rain sensor - Front and rear parking pilot system - Active emergency brake assist (camera-based) - Lane Keeping Assist with driver drowsiness warning and automatic high beam control, additionally with lane keeping assist - Headlight Assist with day/night sensor - Cruise control - Fog lights - Ford audio system * Particle filter: Diesel particulate filter * Radio: Ford audio system with radio and DAB+ - MyFord Dock - FordPass Connect - Speakers, antenna - Audio remote control on the steering wheel - Bluetooth interface - USB connection - Hands-free system * Wheels: Wheel covers * Wheels: Tire repair kit * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Headlamps, low beam: Halogen headlights with daytime running lights * Sliding door entry light, automatic when door is opened * Sliding door, right * Mud flaps, rear * Side protection strips * Power steering * Seat belts - Seat belt pretensioners and force limiters in the front Prjdpfx Aeymibvedxjc * Start-stop system * Rear bumper, with integrated step * Partition (plastic) at the height of the B-pillar * Recirculation function * Lashing eyes * Immobilizer * Heat-reflecting tin

Condition: used, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, Empty weight: 3.500 kg - Documentation available: Yes - Drive system: Conventional Prsdpsxpgwrjfx Adxjc - Power [kW]: 4.5 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 510 - Table width [mm]: 800 - Table depth [mm]: 350 - Magnet width [mm]: 600 - Magnet depth [mm]: 350 - Max. grinding wheel diameter [mm]: 350 - Control: Conventional - Motor power: 4.5kW - Transport dimensions: 2600mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Workpiece Area Pjdpfx Ade Aa Nd Texsrc Workpiece length: 310 mm Workpiece width: 150 mm Workpiece height: 210 mm Grinding Spindle Spindle speed: max. 2,800 rpm Distance between grinding wheel and table: 280 mm Spindle overhang: 250 mm Clamping System Magnetic clamping plate: 300 × 150 × 70 mm Type of magnetic clamping plate: Permanent magnet Machine Design Column diameter: 130 mm Performance Data Total power consumption: 1.9 kW Machine weight: approx. 0.58 t Dimensions Space requirement: approx. 0.62 × 0.72 × 1.80 m EQUIPMENT Permanent magnetic clamping plate

Condition: used, length 500 mm width 500 mm height 110 mm base area . mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m Prodpfeyqv Nnox Adxoc Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Condition: used, total height: 2,000 mm, total length: 3,000 mm, total width: 2,000 mm, Year of manufacture: 2015 Colour: Cream Empty weight: 1.750 kg Price: On request - Year: 2015 - CE marking present: Yes - Serial number: 156608 - Drive system: CNC - Control system brand: Mitsubishi - Power [kW]: 5.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 710 - Y-axis travel [mm]: 340 - Z-axis travel [mm]: 610 - Max. workpiece weight [kg]: 420 - Table width [mm]: 600 Pjdpfx Adozmvuzjxerc - Table depth [mm]: 300 - Magnet width [mm]: 600 - Magnet depth [mm]: 300 - Max. grinding wheel diameter [mm]: 355 - Max. grinding wheel thickness [mm]: 38 - Main spindle power [kW]: 5.5 - Max. spindle speed [rpm]: 1450 - Options: Filter system, Digital readout - Transport dimensions: 3000mm x 2000mm x 2000mm (l x w x h) - Transport weight [kg]: 1750kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1962, grinding length 450 mm grinding width 250 mm workpiece height 275 mm Pjdpfxj Adalpj Adxsrc table surface area 760 x 200 mm distance spindle center to table max. 400 mm table speeds 0 - 30 m/min cross feed 0 - 60 mm/Hub rapid traverse cross 1,2 m/min grinding wheel size ø 250 x 30 x ø 51 mm grinding spindle speed 1400 / 2800 U/min total power requirement 4 kW weight of the machine ca. 1 t dimensions of machine L x W x H 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 175 mm, grinding wheel with flange, wet grinding attachment

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: SIDAC system control MAGNETIC CHUCK Magnet dimensions: 1,000 x 500 mm GRINDING WHEEL Grinding wheel diameter: approx. 350 mm MACHINE DETAILS GENERAL Machine type: Surface grinding machine Manufacturer: Minini Model: JMF 1100CN Year of manufacture: 1992 Machine number: 1,000 DIMENSIONS AND WEIGHT Length: 5,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 5,000 kg EQUIPMENT Diaform dressing device Pjdpfxs Adu Swe Adxsrc Important note: the clamping device shown on the magnetic chuck is not included in the sale and delivery!