Used Maho Mc 50 for sale (431)

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible. Lasdpfxjv H Dgcs Agzok

Condition: ready for operation (used), Year of construction: 1999, operating hours: 32,906 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, table width: 800 mm, table length: 630 mm, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Control: Heidenhain Millplus Swivel head: H / V 0°/90° Speed range: 20 - 8,000 1/min Gear stages: 2 Spindle motor: 16 kW Tool holder: SK 40 Tool stations: 120 Number of pallets: 2 Table size: 800 mm x 630 mm Max. workpiece weight: 800 kg Laedpowrr E Aefx Agzsk MACHINE DETAILS Power-on time: 76,098 h Spindle run time: 32,906 h EQUIPMENT - Chip conveyor - Internal cooling (IKZ) - Electronic handwheel - Oil mist extraction - Operating mode: 4

Year of construction: 2006, operating hours: 109,000 h, condition: excellent (used), functionality: fully functional, Horizontal machining center with 6-fold pallet station Machine has run only in aluminum - new spindle in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001 spindle speed: max. 18000 rpm control: SIEMENS 840D Shopmill clamping area: 500 x 500 mm table load: max. 800 kg workpiece diameter: max. 800mm workpiece height: max. 900mm tool holder: HSK 63 tool changer: 180 positions spindle power: max. 30 kW torque: 5.000 Nm Holding torque: 5.000 Nm rapid traverse/feed rate: 60 m/min Feed force in X/Y/Z: 10 kN EQUIPMENT - chip conveyor - Pallet station 6 pallets - Automatic tool measurement 3 D wireless probe M+H - Coolant system with paper belt filter - IKZ system with belt filter, 40 bar Ljdpfxsmfrgns Agzsak 30 tool pockets in the magazine are defective.

Condition: used, Year of construction: 1993, Table size: 800x400 mm Lasdjwtdv Aspfx Agzsk Including accessories, various holders

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Lodev Sy Sfepfx Agzoak Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 35,966 h, functionality: fully functional, machine/vehicle number: 1540501429A, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 400 mm, controller model: Siemens 840D powerline, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Travel X-axis: 635 mm Ljdpfx Aswr Acxjgzeak Travel Y-axis: 510 mm Travel Z-axis: 400 mm Control: SIEMENS 840D powerline Torque: 82 Nm Drive power: 13/9 kW Speed (max.): 8,000 rpm Tool holder: 40 SK Number of slots in tool magazine: 20 Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed rate X-axis: 10 m/min Feed rate Y-axis: 10 m/min Feed rate Z-axis: 10 m/min MACHINE DETAILS Rated power: 20 kVA EQUIPMENT - Infinitely variable speed - Chip conveyor - Linear guide X/Y/Z: roller recirculating guide - Tool release: pneumatic

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Lsdsv H Dgpspfx Agzsak

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1143 000084 3, TECHNICAL DETAILS X-axis movement: 780 mm Y-axis movement: 560 mm Z axis movement: 560 mm Laedpfx Ajmiilbsgzek B-axis movement: +30° to -120° C-axis movement: 360° stepless Control: Heidenhain iTNC 530 spindle speed range: 0 - 12 000 rpm tool holder: ISO SK 40

Year of construction: 2004, condition: good (used), functionality: fully functional, machine/vehicle number: 28860011684, TECHNICAL DETAILS X axis: 1000 mm Y-axis: 600 mm Z-axis: 600 mm Control: SIEMENS SINUMERIK 810 D POWERLINE rotational speed: 10.000 rpm tool places: 24 tool holder: SK 40 MACHINE DETAILS on request Ljdepvlbnjpfx Agzsak EQUIPMENT IKZ 15 bar, 800L tank Chipping machine Flushing gun X-Y-Z AxBs measuring system

Condition: used, Year of construction: 2003, operating hours: 18,782 h, functionality: fully functional, machine/vehicle number: 2885002273, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 480 mm, Deckel Maho DMC 63V milling machine. Machine manufactured in 2003. Heidenhain iTNC 530 control. Magazine for 24 holders. 8000 rpm spindle on belt. Laedpfx Asv R U Ulogzek Tool measuring probe. Mounted reading system for material measuring probe. Output for connecting computer network for file transfer.

Condition: used, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Z-axis: 1,275 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, input current: 44 A, Equipment: documentation/manual, Max. rotating diameter on the bed 700 mm Spindle hole diameter 93 mm Spindle nose length - tailstock 1,400 mm ASA 8 spindle n.2 speed ranges 2,500 rpm Spindle power 22 kw X-axis useful stroke 320 mm Z-axis useful stroke 1,275 mm 12-position tool turret CNC Philips 432 Laodpfxsv S Hk Ue Agzjk Complete with SMW AUTOBLOCK 400" self-centering Bezel and tailstock original machine manuals PLC and CNC manuals

Condition: repair required (used), Year of construction: 1999, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, table width: 500 mm, table height: 630 mm, Equipment: chip conveyor, Heidenhain TNC 426 Machine functional except for spindle (needs repair) Lasdpfx Agewmgw Ajzok Priced as is.

Year of construction: 2005, condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Lasdpfxovamqde Agzok

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 Ljdjvtnm Hopfx Agzeak T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 1540503266A, TECHNICAL DETAILS X axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm Control: Heidenaihn İTNC 530 Number of tools: 30 Tool holder: SK 40 MACHINE DETAILS on request Lajdpsng Amvjfx Agzek EQUIPMENT Direct path measuring system X,Y,Z Measuring probe Heidenhain TS640 Spindle conveyor Operating mode 4

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, number of slots in tool magazine: 60, tool length: 315 mm, tool diameter: 160 mm, Equipment: chip conveyor, Deckel Maho DMC-60T – 5-Axis Vertical Machining Center The Deckel Maho DMC-60T is a high-precision 5-axis vertical machining center, year of manufacture 2004, equipped with Heidenhain iTNC-530 CNC control. The machine is ideal for complex and high-speed machining thanks to its ISO 40 taper spindle, maximum speed of 18,000 rpm, and motor power of 19/28 kW (continuous/30 min). Main features: Axis travels: X = 780 mm, Y = 560 mm, Z = 560 mm Rotary axes: A = ±150° (head), B = 360° (table), continuous rotation with minimum resolution of 0.001° Table: 630 x 500 mm, maximum load 500 kg Rapid traverse: up to 50,000 mm/min Laodpfjwt N Tyox Agzsk Tool magazine: 60 stations, SK40 DIN-69871 tools, max Ø 80/160 mm, max length 315 mm, max weight 8 kg Additional equipment: Workpiece probing system, chip conveyor, coolant tank with pumps, high-pressure pump through spindle, spindle chiller, transformer, manuals, and CE documentation. Machine dimensions and weight: L 5,100 mm × W 5,000 mm × H 2,500 mm – Weight: 11,000 kg

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC530, workpiece weight (max.): 600 kg, table width: 600 mm, table length: 800 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, spindle speed (min.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 64V LINEAR Machine after complete reconstruction. Spindle after regeneration and replacement of bearings BLUM tool measuring laser Control Due to the restructuring of the company, we have for sale: FAST 3-AXIS MACHINE Manufacturer: DECKEL MAHO Type: DMC 64V LINEAR HEIDENHAIN 530 control Year of production: 2002 Table size: 800X600 Travel: X 640, Y 600, Z 500mm Weight of the workpiece: max. 600 kg Laodevwd Axepfx Agzsk General overhaul of the machine 12.2024 Spindle: SK 40 12000rpm Power S1/S2 13kW/19kW Tool changer: 30-fold HEIDENHAIN workpiece probe Tool probe: BLUM laser Receiver chips Machine in very good condition, After full renovation. Serviced. Machine in constant use.

Condition: excellent (used), Year of construction: 2004, Deckel Maho DMC 60U hi-dyn 5-axis Control: Heidenhain iTNC 530 Spindle speed range: 12,000 rpm Spindle bore: SK40 Number of axes: 5 Travel path: X-axis travel: 600 mm Laedpfxov Rvp Do Agzok Y-axis travel: 700 mm Z-axis travel: 600 mm Table: Outer length: 630 mm Outer width: 500 mm Internal cooling: Yes, with paper belt filter Blohm tool sizing system Cooling pressure: 40 bar Machine equipped with two 650 x 500 mm pallets Machine equipped with 120 tool holders

Year of construction: 2006, condition: ready for operation (used), Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places. Ljdpota H S Sefx Agzoak

Year of construction: 2008, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible. Lasdpfx Aov H Dgiogzek

Condition: ready for operation (used), Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. Documentation available. On-site inspection is possible. Ljdpoup Egxsfx Agzjak

Condition: ready for operation (used), X-travel: 500mm, y-travel: 400mm, z-travel: 350mm, quill stroke: 50mm, rotational speed: 20-5000/min, connected load: 10kVA, controls: Maho CNC 432, length: 2022mm, width: 3030mm, height: 1915mm, weight: 2.1t, operational hours counter: 29,578h, with documentation, without spare parts, mechanically and electrically the machine runs flawlessly, the control elements were recently overhauled. Lasdpfekn R Dhjx Agzek

Condition: ready for operation (used), Year of construction: 2002, Travel path X/Y/Z: 630mm/630mm/560mm, tool holder: HSK-63A, tool positions: 60, pallets: 2, pallet dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 6600mm/6000mm/3200mm, weight: approx. 18000kg, control: Siemens Sinumerik, operating hours: approx. 24152. The machine has a system error - Runtime Error 285, Application oem4421 - and the PLC does not start up. Documentation available. An on-site inspection is possible. Ljdpfx Aew Nq Rqsgzeak

Condition: ready for operation (used), Travel path X/Y/Z: 500mm/380mm/350mm, table dimensions X/Y: 800mm/400mm, spindle taper: SK40, quill stroke: 50mm, speed: 5000rpm, rapid traverse: 4m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1800mm/2000mm/2000mm, weight: approx. 2000kg, control: Heidenhain CNC 432. An on-site inspection is possible. Laodpfx Agjw Nq Snszok

Condition: ready for operation (used), Travel X/Y/Z: 1000mm/600mm/600mm, feed rate: 30m/min, rapid traverse: 30m/min, table dimensions X/Y: approx. 1200mm/600mm, max. table load: 800kg, tool stations: 24, tool holder: SK40, speed: 8000rpm. Machine dimensions X/Y/Z: approx. 3000mm/3500mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10346h, spindle hours: approx. 10346h. Includes a compact filtration system Interlit SUK 200/550, year of manufacture: 2000. The machine is equipped with a new control system. Documentation available. An on-site inspection is possible. Lasdpfxsw Dut Hs Agzjk