Used Monitor for sale (5,076)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w Lsdpfex D Ewmex Ahaoah • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: used, LDS LDS V790-335T Air-Cooled Vibrator with HPA-K CE power amplifier, m+p VibPilot-8, and PC system For sale is a used electrodynamic vibration testing system from Ling Dynamic Systems (LDS). The system is suitable for vibration testing, vibration analysis, environmental simulations, research & development, quality assurance, and industrial load testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker model: V790-335T Type: Air-Cooled Vibrator Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sinusoidal force: approx. 6.67 kN peak Random force: approx. 6.67 kN RMS Shock force: approx. 26.69 kN peak Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar (80 psi) Optional air isolation approx. 5.52 bar (80 psi) Power amplifier: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting: 400 V Maximum connected load: 9.3 kVA Control / Measurement system: The scope of delivery includes a complete PC workstation with monitor, keyboard, and mouse, as well as m+p international VibPilot-8 measurement and control hardware. Installed software: m+p international VibControl VibRunner Version 2.13.27.7 VibMultiPlot Version 2.13.27.7 GraphPad The combination of LDS shaker, HPA-K power amplifier, m+p VibPilot-8 controller, and PC workstation forms a professional system for vibration and shock testing and applications in research, development, and quality assurance. Equipment: LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE power amplifier m+p VibPilot-8 measurement and control unit PC workstation Monitor Keyboard and mouse Connection cables and accessories as shown in the pictures Condition: Used. Normal signs of wear and storage are present. Optical condition see pictures. Scope of delivery: Lsdpfjy Uigcsx Ahajah Scope of delivery as shown in the pictures. All components visible in the pictures and explicitly mentioned are included in the scope of delivery. Transport: Due to its size and weight, collection or shipping via a freight forwarder is recommended. An inspection by appointment is possible. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2015, turning diameter max. 500 mm turning length 800 mm control sl Operate 3G ShopTurn Siemens swing diameter 500 mm distance between spindles 1.020 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 34 kW max. Torque 280 / 380 Nm spindle head 170h5 spindle diameter in front bearing 130 mm spindle bore 87 mm C-Axis 0,001 ° tool taper HSK 63 A number of toolpositions 80 pos. Lsdez S Nygjpfx Ahajah max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool weight 12 kg max. tool length 300 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 19 / 22 kW Torque 85 / 100 Nm tool taper HSK 63 A B-Axis +/- 110 ° x-axis -10 ... +490 mm y-axis +/- 100 mm z-axis 1: 845 mm z-axis 2: 600 mm z-axis 3: 800 mm Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 20 / 27 kW bar material dia. 51 mm spindle bore diameter 73 mm spindle diameter in front bearing 100 mm C-Axis 0,001 ° total power requirement 85 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 7,0 x 2,9 x 2,6 m CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 TC V6 - 5-axis simultaneous machining - Main and counter-spindle - Swivel-type milling spindle - ShopTurn - Off-center turning and milling - Multi-thread cycle - Program state control - Tool sorting cycle - Easy Tool Monitor for Siemens control system - Chuck flushing system for main spindle - Chuck flushing system for counter-spindle - Differential pressure clamping - Coolant supply through the counter-spindle - Bar machining package for CTX beta (77 mm capacity) Workpiece the-take-off device (left side) Hydraulic hollow clamping system 4-color signal tower Interface for bar feeder or bar magazine - In-process workpiece measuring system (Renishaw) - Safety window cleaning system - Coolant spray gun

Condition: used, Beckhoff CPPC 7112-1007 Beckhoff PC Monitor with stainless steel keyboard Mainboard: Boser HS6237 SBC CPU: Intel Celeron Memory: 128 MB SDRAM Slot 1: Slot plate with USB ports and DVI port Laodpfx Aou Ef Rqshajh Slot 2: Boser SBC-V2.2B Slot 3: Slot plate with COM 1 and COM 2 Slot 4: Slot plate with LPT 1 Hard disk: Toshiba MK2023GAS, 20 GB CD-ROM: Teac 235HF 1.44 MB A: Display: 15-inch Toshiba LTM 15C428S The monitor does not have a touchscreen. Touchpad: Glidepoint on PS/2 Ports: KT 7000 on PS/2 Power supply: 24V DC Item condition: used

Condition: used, This listing is for the Radiant Innovation ZG10U Wall Mount co2 Monitor with receiver The unit is in full working condition and is ready for immediate use The ZG10U Wall Mount CO₂ Monitor by ZyAura is a professional indoor air quality monitoring device engineered for environments where accurate CO₂ measurement and ventilation control are essential. It utilizes advanced sensing technology and supports automated safety alerts for confined spaces. Key Features & Specifications CO₂ Measurement Range: 0–50,000 ppm (parts per million) Sensing Technology: Dual Beam NDIR (Non-Dispersive Infrared) – ensures precise and stable long-term CO₂ detection Accuracy: ±100 ppm or ±5% of reading (whichever is greater) Temperature Monitoring: 0°C to 50°C (32°F to 122°F) Display: Large digital LCD that clearly shows ambient CO₂ concentration and temperature Alarm System: Audible and visual alerts with configurable alarm thresholds (AL1 and AL2) Relay Output: Controls external devices (e.g., fans or CO₂ generators) Output: 30 VDC or 250 VAC, max 2A, SPST, Normally Open Automatic Ventilation Control: Relay output can trigger ventilation (e.g., fan) in confined spaces based on CO₂ levels IP Rating: IP54 Splash Proof Protection for the Sensor Unit (SEU), excluding the backside when mounted on a wall SEU + RDU Modular System SEU (Sensor Unit) connects with up to 3 RDUs (Remote Display Units) via 7-meter communication cables Ideal for safety notices in multiple locations or rooms Remote units mirror real-time CO₂ and temperature data from the SEU Laodpoxv A Dbefx Ahajh Common Applications Offices and meeting rooms Classrooms and educational facilities Laboratories and research centers Industrial warehouses and storage units HVAC system integration for smart ventilation Installation Wall-mounted design (recommended ~0.45 m from the floor) AC adapter power supply (110/220 VAC) Easy relay connection to ventilation or safety systems Radiant Innovation ZG10U Wall Mount co2 Monitor with reciever

Year of construction: 2018, condition: ready for operation (used), This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4" LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine. • Controller: IM-7000 • Image pickup device: 1" 6.6 megapixel monochrome CMOS • Display: 10.4" LCD monitor (XGA 1024×768) • Light receiving lens: Double telecentric lens • Illumination system: Telecentric transmissive, top light, four-division multi-angle illumination (motorized), slit ring illumination (motorized) • Measurement modes: Wide-field, High-precision • Wide-field measurement area: 300 × 200 mm (quadangle R50) • High-precision measurement area: 225 × 125 mm • Minimum display unit: 0.1 µm • Measurement accuracy (wide-field, without stage move): ±1 µm • Measurement accuracy (high-precision, without stage move): ±0.5 µm • Measurement accuracy (wide-field, with stage move): ±2 µm • Measurement accuracy (high-precision, with stage move): ±1.5 µm • Linked measurement accuracy: ±(7 + 0.02L) µm (wide-field), ±(4 + 0.02L) µm (high-precision) • Measurable area (XY, stage): 90 × 90 mm • Maximum measurement depth: 30 mm • Light probe diameter: 3 mm • Measuring force: 0.015 N (light probe), 0.3 N (height measurement) • Repetition accuracy: ±2 µm • Measurement range (Z): 0–75 mm • Measuring position accuracy (XY): ±0.2 mm • Minimum display unit (height): 1 µm • Measurable area (XY) wide-field mode: 145 × 95 mm • Measurable area (XY) high-precision mode: 107.5 × 95 mm • XY stage: Motorized, movement range 200 × 100 mm, max load 5 kg • Z stage: Motorized, movement range 75 mm • External remote input: Non-voltage input (contact/solid-state) • External output: PhotoMOS, OK/NG/FAIL/MEAS, rated load 24 VDC, 0.5 A Laodpfxjx D E Npj Ahash • Interface: LAN RJ-45 (10/100/1000BASE-T), USB 2.0 Series A (6 ports) • Record storage: HDD 500 GB • Ambient temperature: +10 to +35°C • Relative humidity: 20–80% RH (no condensation) • Pollution degree: 2 • Over-voltage category: II • Power supply voltage: 100–240 V, 50/60 Hz • Weight head: 31 kg • Controller weight: ~8 kg

Condition: like new (used), Year of construction: 2003, operating hours: 2,032 h, Cold Jet PPAH-325B Dry Ice Pelletizer / Dry Ice Production Machine The machine is available from December. Cold Jet PPAH-325B – Industrial Dry Ice Production Machine Professional industrial equipment designed for the production of dry ice. The machine is built as a heavy-duty industrial unit with an integrated hydraulic system, control panel, and CO₂ pressure monitoring. Machine details: Manufacturer: Cold Jet Ljdjz Adwiepfx Ahasah Model: PPAH-325B Application: Dry ice production Operating hours: 2,032.8 hours Integrated hydraulic power unit Electronic HMI/control panel Emergency stop Hydraulic pressure monitoring Chamber pressure monitoring Injection pressure monitoring Vapor CO₂ pressure monitoring Liquid CO₂ pressure monitoring Separate vapor and liquid CO₂ controls Heavy-duty industrial steel frame The machine is currently located in the Netherlands. The PPAH-325B is a professional industrial machine suitable for companies involved in dry ice production and applications requiring their own dry ice supply. Worldwide delivery can be arranged. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine Lsdpfx Ajz Rl Taohaeah - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: excellent (used), Year of construction: 2021, 30-watt CO2 laser Working area: 457 x 30 mm Engraving and cutting of wood, paper, rubber, acrylic, etc. Exhaust system: Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC Ledsz Suruopfx Ahaeah Includes monitor, keyboard, and mouse. Software: RayJetManager pre-installed.

Condition: used, Year of construction: 2023, For Sale: Mazak OPTIPLEX 4020 FIBER III Fiber Laser Cutting Machine Offered for sale is a Mazak OPTIPLEX 4020 FIBER III, manufactured in 2023 and built by the renowned Japanese machine tool manufacturer Yamazaki Mazak Corporation. This modern fiber laser cutting system combines high productivity, precision, and reliability, making it suitable for a wide range of sheet metal processing applications. Technical Data - Manufacturer: Yamazaki Mazak Corporation - Model: OPTIPLEX 4020 FIBER III - Machine Type: Fiber Laser Cutting Machine - Year: 2023 - Machine Weight: Approx. 5,300 kg - Origin: Japan - Cutting hours : 2592h - Operating hours : 5110h Technical Specifications - Working Area: 4,000 x 2,000 mm - Laser Technology: Fiber Laser Laedpfx Ahjz Ia Uleash - CNC Control: Mazatrol Preview G / Smart Factory compatible - Automatic Focus Cutting Head - High-Speed Linear Drives - Intelligent Nozzle Change System - Automatic Cutting Condition Optimization - Energy-Efficient Fiber Laser Source - Advanced Collision Protection - Integrated Process Monitoring Availability: Immediately Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Manufacturer: Yamazaki Mazak Corporation * Model: OPTIPLEX 4020 FIBER III * Machine Type: Fiber Laser Cutting Machine * Year: 2023 * Machine Weight: Approx. 5,300 kg * Working Area: 4,000 x 2,000 mm * Laser Technology: Fiber Laser AVAILABILITY: IMMEDIATELY * Cutting hours: 2592h

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Ljdpfxey E Hyns Ahaoah Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Year of construction: 2018, condition: used, Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1" TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm Laedpfxercnmzs Ahajh -Weight: 3.1 kg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,472 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, controller model: NGC, table load: 680 kg, overall weight: 3,810 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3-axis HAAS VF-2SSYT was manufactured in 2022. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 914 x 457 mm and a maximum table load of 680 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SSYT vertical machining centre we have for sale. Contact us for further details. • CNC control: Haas Next Generation Control (NGC) • 1 GB program memory, 15" LCD • USB, Ethernet, Wi‑Fi • HaasConnect remote monitoring • VNC, DPRNT support • Early power‑failure detection, program restart from any block • Run Stop Jog Continue, SafeRun collision mitigation • Electronic handwheel, memory lock • Fourth-axis readiness: • VF‑YT 4th‑axis preparation • 4AXD: 4th‑axis drive, connections, and wiring • Note: Rotary table not included • Software options: • DWO/TCPC (Dynamic Work Offsets & Tool Center Point Control) • HSM (High‑Speed Machining with look‑ahead) • Probing cycles and SO, MACRO, COORD, VPS functions • Axis travels and feeds: • Spindle nose to table: 102–610 mm • Rapids X/Y/Z: 35.6 m/min • Max cutting feed: 21.2 m/min • Max thrust X/Y: 8.87 kN; Z: 13.7 kN • Worktable: Lasdpfxj Abap Nj Ahash • 914 × 457 mm • T‑slot table, 16 mm slots, 125 mm spacing • Spindle: • Direct drive, spindle cooling, taper air blast • Rigid tapping • Tool changer: • Side‑mounted ATC, 30 + 1 tools • Max tool Ø (all pockets): 63.5 mm • Max tool Ø (adjacent empty): 127 mm • Tool‑to‑tool: 1.8 s; chip‑to‑chip: 2.4 s • Accuracy: • Positioning ±0.005 mm; repeatability ±0.003 mm • Ballscrew thermal compensation • Coolant and probing (integrated options): • P‑COOL: Programmable coolant nozzle • TSC: Through‑spindle coolant 21 bar, 22 l/min • WIPS‑R: Wireless workpiece and tool probing system • Machine features: • Fully enclosed machining area (sliding front doors, hinged side windows) • Coolant system with pull‑out tank • Automatic central lubrication • Compressed‑air connection • Machine work light Additional equipment • AUGER: Screw‑type chip conveyor • ACF: Auxiliary coolant filtration system, 25 µm • COOLANT MAINT PACK: Coolant maintenance package • COOLANT REFILL: Automatic coolant replenishment system (requires external water supply) • Enclosure mist extraction / mist condenser (as supplied) • OIL‑SKIMMER: Coolant tank oil skimmer • CHIP STRAINER: Mesh filter and metal chip basket set • LK: Machine lifting kit with lifting accessories and brackets Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch Laedez Sw N Aspfx Ahaeh :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: ready for operation (used), TFT monitor/screen for Deckel, Philips and Maho 432/10, serial number: 153197, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfx Ahjz Ac T Asajah

Condition: ready for operation (used), Year of construction: 2011, operating hours: 77,128 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, spindle speed (max.): 8,000 rpm, spindle motor power: 43,000 W, number of slots in tool magazine: 50, number of axes: 4, This 4-axis HELLER H6000 horizontal machining centre was manufactured in 2011. It features a generous X, Y, and Z-axis travel of 1,000 mm each, along with a B-axis NC rotary table. The machine is equipped with a SIEMENS 840D control unit and has a maximum permissible clamping mass of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER H6000 machine we have for sale. Contact us for further details. - Operating Hours (Betriebsstunden): 77,128 h- Effective Operating Time (Nutzlaufzeit): 57,997 h- Control Unit: SIEMENS 840D solution line- X-Axis Travel: 1,000 mm- Y-Axis Travel: 1,000 mm- Z-Axis Travel: 1,000 mm- Rapid Traverse Speed: 50,000 mm/min- Feed Speed: 1 - 50,000 mm/min- Acceleration: 5 m/s²- Max. Permissible Clamping Mass: 1,000 kg- Pallet Changing Time: 13 s- Pallet Changer: 2 pallet slots- Pallet Size: 630 x 630 mm (2 units in basic machine + 1 additional pallet)- Workpiece Diameter: 900 mm (1,290 mm)- Workpiece Height: 1,200 mm- Work Unit: PC 100 PowerCutting- Speed Range: 8,000 rpm- Max. Drive Power (S6-40%): 43 kW- Max. Torque (S6-40%): 822 Nm- Workpiece Table: NC Rotary Table, indexing 360,000 x 0.001°- Workpiece Setup Station: Manually rotatable pallet 4 x 90°- Workpiece Clamping: Mechanical (includes 5-fold media interface, hydraulic pressure 60 bar)- Tool Taper: HSK 100 A (DIN 69 893)- Tool Magazine: Chain magazine with 50 slots- Max. Tool Diameter (all slots occupied): 112 mm- Max. Tool Diameter (adjacent free slots): 280 mm- Max. Tool Length: 600 mm- Min. Chip-to-Chip Time (t2,3 according to VDI 2852): 4.2 s- Coolant & Chip Management: KNOLL scraper belt chip conveyor for wet machining, KNOLL KF 400 paper band filter coolant cleaning system (70 bar internal coolant supply / IKZ), work area flushing, drip tray drawing, window blow-off device- Tool Monitoring & Accessories: Fast drill breakage control, chain magazine tool shank cleaning device, process-integrated tool monitoring + collision protection monitoring, portable handwheel unit (Bedienhandgerät) with interface- Electrical Parameters: 400 V, 50 Hz, Nominal Current 87 A Technical Specification Taper Size HSK 100 Lodpfx Asz Spt Tehaeah

Condition: excellent (used), Year of construction: 2017, Ref:11156 . 2017 Schmedt Präleg XL Casing-in Pressing Machine For casing-in a variety of thin to thick books into flexible or hard cases. Special features: • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Lodpfoz Hbuqex Ahaeah Twin PVA cold glue tanks. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230 V + compressed air.

Condition: ready for operation (used), T-POLE T-POD-121 Industrial Monitor 12.1" , serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Laodpfjz Ac R Ujx Ahash

Condition: ready for operation (used), T-POLE T-POD-121 Industrial Monitor 12.1" , serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Laedpfoz Ac Sfsx Ahash

Condition: used, TOX Type: EMB 030.068.A.001 TOX Pressotechnik Insertion Press, TOX-C-C-Frame Press Pneumohydraulic manual workstation with process monitoring for inserting functional elements. Lajdpfxjzd Rhks Ahajh Technical data: Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air preparation: Filtered and dried compressed air, max. particle size 40 µm Air pressure, working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / Return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC, special, complete Electrical connection: 90-230V/AC Ambient temperature, operation: Tmin. = 10°C, Tmax. = 60°C TOX Insertion Monitoring System EPW 500FP, Force/Travel Measurement Holding device ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Safety guard circuit: Leuze B20/B21 light curtain Insertion tool: See (Images 15 to 18) Insertion sleeve (Image 17): 24.5 ∅ mm Application: Insertion Weight: 2200 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Resonator power: 5 kW Working area (L × W): 4,000 × 2,000 mm Sheet metal thickness, steel: max. 25 mm Sheet metal thickness, stainless steel: max. 20 mm Sheet metal thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal edge detection Lasdez Npdgjpfx Ahajh 17-inch touch color display Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine enclosure with certified viewing window, door on the right Electric roll-up roof Retrofitting capability for max. 2 additional LLK outlets

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Ledpfx Ahjz Slu Ijasah Control unit Keyboard and mouse Wiring

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Lajdpfszlbqrjx Ahaeh Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS according to specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base fra...

Condition: used, mileage: 165,000 km, power: 132 kW (179.47 HP), first registration: 12/2020, fuel type: diesel, overall weight: 7,200 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 2,510 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Special equipment: Storage compartment in the headliner of the cab, storage compartment on the dashboard with USB connection, front axle load 2.7 t, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, body manufacturer interface, rear differential lock, automatic climate control, steering column (steering wheel) adjustable in height/length, light and rain sensor, switch for lighting in the cargo area, rear cross member at the end of the frame, mud flaps at the front, seats in the cab: luxury driver's seat, Traction Plus (electronic traction control) with hill descent assist, auxiliary heater (hot water) with timer control Additional equipment: Airbag on the driver's side, trailer stabilization program (TSM), trailer socket preparation, anti-slip regulation (ASR), version: C-series, exterior mirrors electrically adjustable and heated, exterior mirrors long, for vehicle width 2350 mm, brake assistant, electronic brake force distribution, driving assistance system: hill start assist (AAS), driving assistance system: emergency braking assistant AEBS + City Brake, driving assistance system: lane monitoring assistant proactive (LDWS), digital tachograph, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, transmission automatic - Hi-Matic (8-speed), grab handle A-pillar, urea tank (AdBlue): 20 liters, body/superstructure: standard flatbed, fuel tank: 90 liters, engine 3.0 liters - 132 kW diesel, wheelbase 5100 mm, spare wheel in driving tires, low emission according to emission standard Euro 6d, seats in the cab: double passenger seat, maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle / rear axle Palfinger tail lift, 1000 KG Interior cargo area: L 6.20 W 2.46 H 2.51 meters Payload: 2600 KG Laedpfxe Acczqo Ahaoh Financing possible

Condition: used, INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideal for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Mains current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Lodpfx Aozlp Ixohaoah Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Operating console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the pictures Technical documentation as shown in the pictures Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of delivery: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Operating console Testing platens / compression tools as shown in the pictures Machine accessories as shown in the pictures Technical documentation as shown in the pictures Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for recommissioning. A functional test could not be carried out due to the missing software. The sale is therefore preferably aimed at specialist companies for recommissioning or upgrading. Condition: Used Optical condition according to the pictures. Normal signs of wear and tear are present. The workbench shown in the photos is not part of the sale. The operating console and the machine accessories shown are included in the scope of delivery. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading with a forklift is possible. Shipping via a freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone or email.