Used Offset Papier for sale (843)

Condition: good (used), Year of construction: 2004, functionality: fully functional, CP 2000: Touch Screen Console Preset Plus Feeder Dksdpfswlq R Rsx Afnsh Alcolor Vario Dampening Heidelberg Autoplate (Automatic Plate Changing System) Technotrans Cooling Device Ink. Temperature Control (Watercooled) Grafix Exatronic Duo Plus: Powder Sprayer Perfecting 1/1 - 2/0 Eltex Antistatic Device Washers Impression Account: 310 Mio.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Full Automatic Perfector 5/0 - 2/3 Heidelberg Autoplate (Automatic Plate Changing System) Prinect Press Center Control Station with Wallscreen Prinect Axis Control: High-performance Color Measurement System Preset Plus Feeder DryStar Combination CANopen IR Dryer with 2 Slides (IR/Hotair) Dsdpfew T Tqzsx Afnjkh Ultrasonic Double Sheet Control InkStar CAN Preset Plus Delivery X2 / 160 cm (2 modules) FilterStar: 2-stage dampening solution filtration system ( for Hydro and Combistar) Technotrans CombiStar CANopen: Ink. Temperature Control (Watercooled) CoatingStar CANopen PowderStar AP 500-P: Powder Sprayer Staticstar Compact: Antistatic Device on Feeder & Delivery Coating System with Doctor Chamber Blade Steel Plate in Feeder & Delivery AirStar: Central Air Supply Cabinet (Aircooled) Dynamic Sheet distance control in the Delivery trough a Ultrasonic Sensor AirTransfer System (For Sheet Transfer) Double Sized Impression Cylinder - Chromed Alcolor Vario Dampening Automatic Washing Devices Impression Account: 230 Mio.

Condition: good (used), Year of construction: 1999, Heidelberg Autoplate (Automatic Plate Changing System) +Version Alcolor Dampening CP Tronic Control System Dsdpfjw U A Npjx Afnjkh Automatic Ink Roller Washing Device Blanket Washing Device Impression Cylinder Washing Device Grafix Alphatronic 200: Powder Sprayer

Year of construction: 2001, operating hours: 126,000,000 h, condition: good (used), machine/vehicle number: 204750, Perfecting 2/2 - 4/0 CPC 1-04: Off Press Ink & Register Control Alcolor Dampening Dsdpfxslml Nhs Afnskh Semi Automatic Plate Change Grafix Alphatronic 200: Powder Sprayer Technotrans Cooling Device Automatic Ink Roller Washing Device Blanket Washing Device Staticstar Compact: Antistatic Device Impression Account: 126 Mio.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Coating Unit Optional Printing Thickness: 0,5mm Extended Delivery (X1) CP 2000: Touch Screen Console Straight Machine Alcolor Dampening Grafix Alphatronic 200: Powder Sprayer Ink unit Temperature Control Technotrans (Aircooled) Dkodpswr T Rtefx Afnoh Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device Semi Automatic Plate Change High Pile Delivery IR Dryer Heidelberg Impression Account: 98 Mio.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0-261-20-5976, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Dksdpsydihdofx Afneh Feed speed: 20 m/min MACHINE DETAILS Control system: POWER CONTROL PC 20+ Operating current at full load: max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear corner rounding unit with 2 motors Edge scraper unit Glue scraper unit Brushing unit

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, Original purchase price of the printer was €486,000 EUR net! TECHNICAL DETAILS Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly print capacity: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 gsm to 350 gsm Paper weight range (when validated): up to 400 gsm Duplex printing media weight: 350 gsm MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Dedpfx Afjyg Eq Hsnokh Dimensions main unit C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like print quality Suitable for specialty and textured media In-line color management sensors Automatic calibration

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Dkjdpjwcfgbjfx Afnjh Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 2011, machine/vehicle number: 25621, workpiece diameter (max.): 360 mm, Equipped with: Gear Spindle Runout: -Radial (Bore): .00005 -Axial (Face): .00005 Pinion Spindle Runout: -Radial (Bore): .00005 Axial (Face): .00005 Axis Repeatability: -X: .0001 -Y: .0001 -Z: .0001 Axis Lost Motion: -X: .00005 -Y: .00005 -Z: .00005 Fanuc 160I MB Control Base Work Holding Draw Bars Automatic Doors Spindle Chiller Transformer Hydraulic System Festo Pneumatics Automation Interface Available SPECIFICATIONS: Maximum Gear Outside Diameter: 360 mm (14.2") Maximum Pinion Outside Diameter: 340 mm (13.4") Maximum Pinion Drive Speed: 3000 rpm Maximum Gear Drive Speed: 1500 rpm Offset Vertical 150 mm ( 5.9") Pinion Cone Range: (90) (135-350) (70) (146-438)* (110) (51-343)* Gear Cone Range: (90) (65-280) Dkjdpfx Afoxdfansneh (70) (78-306)* (110) (56-284)* Standard Testing Torque Load 2 to 90 Nm (1.5 to 66 ft-lb). Parallel Axis - face-to-face 147 - 362 - Center Distance -7 - 250 Pinion Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 419 mm (16.5") Gear Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 250 mm (9.8") Floor Space (width & length) 2100 x 2550 mm (82.7 x 100.4") Height (to top of stack light) 2750 mm (108.3") Weight (base machine) 9100 Kg (20062 lbs)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Dksdpfx Afertrzdjnsh Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel vertical mixing vessel. Unit has a welded flat top and welded conical bottom. Unit measures approximately 1650mm diameter x 1800mm straight side. Unit has a top entry stainless steel offset (3) deck 3-blade pitched agitator driven by a 3kW motor. Unit is mounted on (3) legs. Specifications: Dkjdpfx Ajygvgrefnoh Capacity: 792.5 gal Diameter: 5.41' Height: 5.91' Type of stainless: stainless steel Type Of Heads: Welded Flat Top, Welded Conical Bottom Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 3 Dimensions: 1650mm diameter x 1800mm straight side

Year of construction: 2025, condition: new, New trommel for Komptech Maxx. Dsdpsyg E Dyjfx Afnjkh Mesh size square offset 25 x 25 mm. Steel thickness 8 mm. READY FOR DELIVERY.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Control: F31iA X axis travel mm: 560 Dsdpeyhlqpofx Afnokh Y axis travel mm: 560 Z axis travel mm: 630 B axis travel: 360.000° Table load capacity: 400 kg Cutting feed rate X/Y/Z mm/min: 50,000 Maximum rapid traverse X/Y/Z m/min: 50 Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: BT-40 Torque Nm: 120 Magazine type Magazine positions: 60 Maximum tool diameter mm: 70 Maximum tool diameter with adjacent positions empty mm: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity l: 500 Through spindle coolant pressure bar: 70 EQUIPMENT Chip conveyor Through spindle coolant with high-pressure pump, 70 bar Tool breakage detection probe Renishaw spindle measuring system Extended tool offsets: up to 400 offsets Additional coordinate systems: 48 Workpiece coordinate systems Tool life management Extended program memory: Total length 1,280 m (512KB) Up to 1,000 storable programs Preparation for NH4000 8CPP + 8 Pallets

Condition: used, Year of construction: 2008, Offset 2 color with coating KBA Rapida 105-2+LV CX Year: 2008 Number of impressions (mio): 48 Machine control - ColorTronic - ErgoTronic Professional - LogoTronic Basic - CX Package Feeder - DriveTronic feeder Dsdpfx Afex Exg Tenokh - Non-Stop feeder Printing units - Number of printing unit(s): 2 - Straight machine - PWHA Semi Automatic Plate Change - Varidamp dampening - Automatic inking roller washing device - Automatic blanket washing device - Dampening cooling and circulation system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 1 - Harris & Bruno chambered ductor blade system - Number of Anilox roller(s): 1 Drying - IR + hot-air dryer in delivery Delivery - Extended delivery - Powder spray: Grafix Accessories - Compressed air compressor

Condition: used, Year of construction: 1998, Offset 2 color Shinohara 66-2 Dodjwahvajpfx Afnekh Year: 1998 Number of impressions (mio): 79 Machine control - Shinohara console Printing units - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change - Cooling system - Dampening system: Shinohara Delivery - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4

Condition: used, Year of construction: 2007, Offset 5 color with perfecting + coating Heidelberg CD74-5-P+LX - C Year: 2007 Number of impressions (mio): 250 Machine control - CP 2000 - Prinect Axis Control Printing units Dksdpev Rx A Hsfx Afnjh - Number of printing unit(s): 5 - Machine with perfecting: 2/3 - AutoPlate - Alcolor dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening system: Technotrans beta.c - Ink temperature control Coating - Number of coating unit(s): 1 - Tresu chambered doctor blade system - Number of Anilox roller(s): 1 Drying - DryStar: DryStar 2000 IR + hot-air Delivery - Powder spray: PowderStar Accessories - Air cabinet: AirStar - Compressed air compressor: Atlas Copco

Condition: used, Year of construction: 2004, Offset 5 color with coating Roland 705/3B LV Year: 2004 Number of impressions (mio): 258 Machine control - RCI - RCI JobCard Feeder - Suction feeder table - Anti static device - Steel plate in feeder Printing units - Number of printing unit(s): 5 - Straight machine - APL but used as PPL Semi Automatic Plate Change - RolandMatic - Automatic inking roller washing device Dksdpfsv Ewlvox Afnsh - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans - AlcoSmart - Ink temperature control Coating - Number of coating unit(s): 1 - UV coating - Tresu chambered ductor blade system - Drying position possibilities: 3 positions( 1/2, 2/3 and after 5th) - Number of interdeck cassettes/lamps: 2 - UV interdeck dryer - UV dryer in delivery: 3 lamps - IR dryer in delivery: (Eltosch) Delivery - AirGlide - Extended delivery - Powder spray: Grafix Cantronic 3000 - Compressed air compressor, excluded

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input length: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Filling width per cycle: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: Max. usable press width depends on individual lamella widths • In multi-lane operation, filling widths may vary by max. 15 mm • Minimum contact surface per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² Dkodpfxox D I Nrs Afnoh • Press bed and construction: • Press bed area: approx. 2500 x 1300 mm • Stable base frame with lower press table in stainless steel (ground electrode) • Upper pressure plate with hydraulic motor “anti-reb” feature for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure over the joint and compensate tolerances • Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically movable to the current filling width • Integrated hydraulic unit for press force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection value of press (without options): 7 kW • Electrical connection value for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and control panel • Protective cover Additional equipment • Collection table extended to 3700 x 1300 mm (with stainless steel wood support) • Motor-driven multifunctional pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue head • Feed system for different widths • Camera • Washing and rinsing device for glue head • Modem with software for online connection

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,783 kg, axle configuration: 3 axles, first registration: 01/2022, total length: 13,620 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2022, Equipment: full service history, power assisted steering, Technical specifications ROTOS SCB running gear. SCB axle 9 t, SP2040, FM1300,120 offset disc brakes 430 mm. EBS 2S/2M, with roll stability program. Light system 24V with multi-chamber light. Tyres 385/55R22.5. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Pallet stop straight, on both sides on outer frame 19 mm high, 2,460 int. dim. Schmitz Cargobull floor sealed all around and in-between the floor stops. Row(s) alu support laths with connection profile. VARIOS sliding curtains 880g/m² with reinforcements for load securing. TIR cord with holder incl. bulkead cord for T1 transit. Tarpaulin quick tensioner, front. Curtain with anti-theft protection 1800mm high. Rear doors: Anodized. Steel corner posts: galvanized. Red reflective tape surrounding rear closure. Dksdpfx Afjyf Er Uensh Contour markings on side curtain, colour: reflective white.

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Djdpfx Aeu Aa I Ssfnjkh Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Dsdpfx Asu Dg D Aefnjkh Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Dksdpsrmkfnefx Afnoh Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: excellent (used), Year of construction: 2021, Ref: 11062 . 2021 Horizon SmartStacker Only 1.1m books on the counter! The latest, innovative way to process B2 (20” x 29”) digitally printed sheets to finished format size. Features: Near-line operation with Sheet Feeder – can be operated as a near-line system. Newly designed sheet feeder accommodates B2 (20” x 29”) sheets at up to 4,500 sheets per hour. Finishing Line Controller (FLC) controls all setup and operation of the SmartStacker by use of JDF workflow. Can serve multiple HP Indigo 10000 Digital Press units and other HP Indigo presses. Can be connected directly inline to an HP Indigo 10000 Digital Press. Print submission, print, and sheet processing performed without any manual operation for higher sheet integrity & efficient workflow. Can be connected with an Horizon signature folder, saddle-stitcher or perfect binder to achieve total finishing automation. Specification: Sheet Size (Before Cut) Max. 762 x 530 mm or 30.000" x 20.865" Min. 279.4 x 330 mm or 11.000" x 12.995" Piece Size (After Cut) Max. 381 x 530 mm or 15.000" x 20.865" Min. 100 x 105 mm or 3.940" x 4.135" Sheet Weight Range: Normal Paper: 81.4 to 370 gsm Coated Paper (for Merge Stacker): 90 to 360 gsm Dkedpfeycb Srsx Afneh Paper Thickness: 4 to 15 pt or 0.1 to 0.381 mm *1 pt=1/1,000" Sheet Stacking: Straight Stack or 10 mm or 0.39" Offset Stack Maximum Stack Height: 254 mm or 10.00" Number of Cuts: 1st Process Unit: 1 to 7 columns (14 cutters) 2nd Process Unit: 1 to 4 rows (8 cutters) Production Speed: Up to 4,600 sheets per hour * Production speed differs depending on number of cuts in 1st Process Unit and type/condition of sheets. * HP Press may need to slow down depending on the sheet condition in case of inline configuration.

Year of construction: 2008, condition: used, very good condition - available at short notice The Foellmer Duplicator DigiTab 2010 Plus (printing - counting - marking = 1 operation) has a menu-guided operation via touchscreen display at the rear of the housing. The mobile and height-adjustable stand is positioned at the side of the delivery on most machines. Any number from 5 - 99999 can be set for the counting strip insertion. Infinitely variable adjustment of the strip length 20-200 mm and holding time approx. 0 - 10 sec. of the counting strip is possible. The Suptramat enables the control and waste sheets removed by the printer from the running production to be deducted from the total number and at the same time the packet size marked by strips is corrected accordingly. The total counter is used to record the total number of good sheets adjusted with the Suptramat. Dksdpfx Afjyguubjnjh To connect the DigiTab, you need a universal connection box for an interface with a potential-free or 24 V pulse directly from the machine or from a sensor.

Condition: used, Strip inserter Mediprint Str. 4.2 Sword length: 80 cm Max. tripod height: 1,450 mm good, working condition available at short-notice Dkedsyguraspfx Afnjh