Used Pallet Dismantler for sale (8,055)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Pallet production line by DREW-BET (KAROLEX) Operated by 3 people Capacity: up to ~200 pcs/hour Year of manufacture: 2013 – in very good condition Possibility of using uncut boards along the length, which significantly speeds up production. The line is equipped with two saws (longitudinal and cross-cut). The line includes: - Through-feed nailing machine Kdjdpfx Aey D Uchjiisr - Longitudinal milling and trimming machine - Corner trimming machine - Transfer table - Cross-cut saw - Flipper/rotator - Stacker - Magazine - Chain waste conveyor running under the entire line The entire line is fully functional and connected to power. Very quick dismantling and transport (fits on two trucks).

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: Seriennr. 158440; Masch. Nr. 407100, overall weight: 3,800 kg, controller manufacturer: Schunk, control cabinet width: 1,000 mm, control cabinet height: 200 mm, input voltage: 400 V, input current: 32 A, repeat accuracy: 8 mm, warranty duration: 12 months, pallet spaces: 6 euro pallets, control voltage: 24 V, measuring range X-axis: 3,100 mm, measuring range Y-axis: 3,300 mm, measuring range Z-axis: 1,600 mm, Schunk palletizing robots are used to place our packages on Euro pallets. Kjdpfey S Ak Njx Aiiedr The robot has 6 stations, where pallets can be changed/exchanged during operation. A production stop is not necessary. The robot is designed for package sizes of 30 x 40 x 10 cm (8 packages per layer). To ensure the stability of the pallets, cardboard sheets can be inserted between the layers. The intermediate layer sheets are stored on a single sled, so that all six stations can be filled with packages. Dismantling and loading are organized and handled by the buyer.

Condition: good (used), functionality: fully functional, For sale is a Siat brand pallet wrapper / stretch film machine. The unit was fully functional when it was dismantled and stored for transport. After reassembly and connection, it is immediately ready for operation. Turntable diameter: 150 cm Drive-on ramp Rail-guided film carriage Transport and loading can be organized across Europe for an additional charge, if desired. All prices are plus VAT. Inspection by appointment is possible. Please contact us – our team will be happy to assist you. Ksdjw Eu Iaopfx Aiisdr Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your operation? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2014, functionality: fully functional, total length: 1,300 mm, total width: 1,200 mm, Equipment: type plate available, Pallet Lift Table / Pallet Transfer Unit Manufacturer: Overbeck Year of manufacture: 2014 Condition: Good (Used) Drive type: Chain drive Total length: approx. 1300 mm Kdjdpfxjypi Ube Aiijr Total width incl. motor: approx. 1200 mm Total width without motor: approx. 970 mm Roller width: approx. 945 mm / Usable width: approx. 880 mm Roller diameter: approx. 80 mm Number of rollers: 7 Roller pitch: approx. 200 mm Stock: 2 units Price per unit Internal item number: 2026030301 The conveyor system was in operation until disassembly. Condition: Fully functional, with signs of wear Ideal for fast material handling Professionally dismantled and packaged Thanks to the excellent workmanship, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for inbound and outbound goods. We are happy to provide you with a customized offer or advise you on project planning or assembly questions. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our excellent network of industry specialists. We have successfully completed projects for companies in sectors such as logistics, pharmaceuticals, skilled trades, and the electronics industry. Together, we will develop strategies to optimize your workflow and material flow cost-effectively and sustainably. We can also offer fully automated sorting solutions or additional components such as picking shelves or containers.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 2 identical machines available, manufactured in 2021. The machines were only used for a short period in test operations within a large warehouse and then professionally dismantled and stored. Therefore, they are in very good, fully functional condition. Documentation for the machines is available. The XF / XP 111 M is a fully automatic strapping machine with an upper sealing unit. It was designed to strap a large number of pallets of different sizes vertically with PP or PET strapping. This system is reliable, easy to operate, and can be installed in a confined space thanks to its compact dimensions. For PP and PET strapping Vertical strapping Tension up to 5,500 N Siemens PLC S7 Compact, minimal footprint Easy access to all mechanical components Kdjdpow Htz Iefx Aiier Simple operation with touch screen The machines have been professionally dismantled and stored – immediately available. Additionally, 90 new, unopened rolls of strapping, original Cyklop, are also optionally available. Price per machine, net, plus VAT. Special price for purchasing both machines: €45,000 net, plus VAT, ex RyFo warehouse.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Kodpsykrtpjfx Aiijdr Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system Kdodpfx Aszhbf Ieiijr * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: used, Year of construction: 2017, functionality: fully functional, GF+ FORM 300 – EDM machine with WorkPartner 1+ automation For sale is a high-quality GF+ FORM 300 EDM machine with automated workpiece/electrode handling system WorkPartner 1+ automation, manufactured in 2017. The machine is from GF Machining Solutions (Georg Fischer) and is particularly suitable for the precise machining of demanding workpieces in the tool and die making industry. Kdjdoztn Adepfx Aiijr Machine features: • Manufacturer: GF Machining Solutions / GF+ • Type: FORM 300 • Automation: WorkPartner 1+ • Process: Ram EDM • Robust and precise design for professional production use • Automated loading through WorkPartner 1+ • Integrated machine control • Suitable for tool and die making, as well as demanding precision machining The depicted system is located in an industrial production environment and is in used condition, as shown in the pictures. The combination of GF+ FORM 300 and WorkPartner 1+ enables an efficient, automated production process and reduces manual intervention. This is particularly interesting for companies that want to expand their EDM capacity or implement an automated ram EDM solution. The machine can be inspected at any time, but it has already been dismantled and is no longer connected to the power grid. Therefore, a functional demonstration is not possible. The pallets and electrode holders can be purchased separately. Important note: The operating hours will be provided later, but the machine has hardly been used. Price: on request Inspection: possible by appointment Sale is preferred to commercial enterprises. The machine is sold used. Sale excludes any warranty for defects. All information is provided to the best of our knowledge, but without guarantee. Errors, prior sales, and changes reserved.

Condition: good (used), Year of construction: 2019, Schulte Lagertechnik Pallet Racking – Starter Bay Manufacturer: Schulte Lagertechnik Rack type: Starter bay Upright type: S610-M18 Total length: 2700 mm Rack height: 4500 mm Rack depth: 1100 mm Clear bay width: 2700 mm Beam type: LNS-Duo 110 x 50 x 2700 mm Number of storage levels: 4 (incl. floor level) Kodozrlkvjpfx Aiiodr Number of bays: 3 Max. beam load: 2580 kg Max. bay load: 8200 kg Pallet spaces: 12 Scope of delivery: 02 x Schulte pallet rack uprights 4500 x 1100 mm (blue) 06 x Schulte pallet rack beams 2700 x 110 x 50 mm, 2580 kg (orange), incl. locking pins Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive one-stop service: Assembly & Disassembly Whether for new installations, reconfiguration, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racks (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Rack Testing & Inspection (DIN EN 15635) Safety is a legal requirement. We conduct the annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Preparation of a legally compliant inspection report, including an inspection sticker. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2019, 8.54-Meter Schulte Pallet Racking, 4 Meters High 1 starter unit & 2 add-on units, each with 4 levels, accommodating 36 Euro pallets 3 beam levels, height-adjustable in 50 mm increments Frame bracing via bolted diagonal and horizontal struts Profiles in blue / supports and beams in pure orange (RAL 2004) Manufacturer: Schulte Lagertechnik Upright type: S610-M18 Total length: approx. 8540 mm Rack height: 4000 mm Rack depth: 1100 mm Clear bay width: 2700 mm Beam type: LNS-Duo 110 x 50 x ... Number of storage levels: 4 (incl. floor level) Number of bays: 3 Kedpfxoznh Trj Aiiedr Max. beam load: 2580 kg Max. bay load: 8200 kg Pallet spaces: 36 Scope of delivery: 04 x Schulte pallet rack uprights, 4000 x 1100 mm, blue 18 x Schulte pallet rack beams, 2700 x 110 x 50 mm, 2580 kg, orange (incl. locking pins) 04 x Pallet rack chipboard decking panels, 2690 x 980 x 38 mm 20 x Galvanized depth supports Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (compliant with DIN EN 15635) Safety is a legal requirement. We conduct the mandatory annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Preparation of a legally compliant inspection report, including an inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster Kodpfozpvdzex Aiijdr The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: used, Year of construction: 2011, functionality: fully functional, This is a good, fully functional repair line for Euro pallets, equipped with a roller conveyor, two workstations, a milling machine, a corner saw, and a stacking unit. The plant has seen little use and is currently dismantled and placed on a trailer. Inspection can be arranged by appointment. Additional photos are available upon request. Kodey Nl Ryjpfx Aiiodr

Condition: good (used), Year of construction: 2007, functionality: fully functional, load capacity per storage section: 11,500 kg, total length: 390,000 mm, total height: 7,000 mm, total width: 1,000 mm, shelf height: 7,000 mm, support length: 2,700 mm, shelf length: 51,300 mm, load capacity: 1,000 kg, load capacity per stand: 11,500 kg, frame height: 7,000 mm, load per truss pair (max.): 3,000 kg, frame width: 85 mm, axle spacing: 2,700 mm, mesh size: 2,700 mm, number of shelf rows: 7, pallet spaces: 1,845 euro pallets, construction width: 27,003,600 mm, Approx. 390 linear meters of STOW / Link 51 / Allclick pallet racking – approx. 1,600 pallet spaces Used pallet racking system in good condition, see pictures and video. Total length approx. 390 linear meters Height approx. 7,000 mm Approx. 136 racking bays Approx. 1,600 pallet spaces including ground level Beams mostly approx. 2,700 mm, partially approx. 3,600 mm The system mainly consists of STOW pallet racking, with additional sections of Link 51 and Allclick. Negotiable price: €32,000 net The offer includes approx.: 136 racking bays 145 racking frames 958 beams total of which 113 bays are STOW 16 bays are Link 51 7 bays are Allclick Locking devices End-of-aisle protection various racking accessories Of the 958 beams, approx. 156 are additional STOW beams, which are not currently installed in the assembled system. Additionally available: Rear panel mesh covering an entire row of racking approx. 51,300 mm length approx. 7,000 mm height corresponds to approx. 18 bays at 2,850 mm each The entire racking system was assembled until just before the start of dismantling and was documented with photos, videos and drone footage. The dismantling will be carried out professionally. The material will be sorted according to racking system and component type. Partial sale or sale of individual racking systems is possible by arrangement. Quantities, dimensions and pallet spaces are approximate. Minor deviations are possible. Assembly throughout Europe is possible for an extra charge! Looking forward to hearing from you or receiving your call! Best regards, Kedpfx Aiszugtdsijdr Michal Stasiak

Condition: excellent (used), Year of construction: 2002, Manufacturer - OMES Capacity - 1400 pallets/shift Year - 2002 Line currently dismantled Kjdpfowwiv Aox Aiijdr

Condition: used, Year of construction: 2006, operating hours: 45,559 h, functionality: fully functional, machine/vehicle number: 183519, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, overall weight: 11,350 kg, - Year of manufacture: 2006 - Worktable: pallet size 500 x 500 mm - Workpiece dimensions: max. 800 x 1000 mm - Travels: X 730 mm / Y 730 mm / Z 740 mm - Spindle diameter: 215 mm - Control: Mazatrol PC Fusion CNC 640M - Feed rate: 1 – 60,000 mm/min - Rapid traverse (X, Y, Z): max. 60 m/min - Speed range (2 steps): 35 – 12,000 rpm - Internal coolant supply – 70 bar - Renishaw measuring probe - Chip conveyor Ksdpfx Aioylh R Toisdr - Tool magazine: equipped with 160 slots + approx. 60 additional tools - Palletech high-bay system: 16 pallets + 2 loading stations - Machine hours: 45,559 h - Machine weight: approx. 11,350 kg - Serial no. 183519 Net price excluding dismantling and unloaded ex-works Luckenwalde (Germany), without transport

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Kdjdpfxow R Enmo Aiior Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: not inspected (used), Year of construction: 2022, Lease return Includes charger Equipped with a pallet or shelf lift, the MiR600 can automatically pick up, transport, and deliver pallets throughout your facility. The MiR600 meets the latest safety standards and is a safe alternative to forklifts. With a load capacity of up to 600 kg, a speed of 2 m/s, and the ability to maneuver quickly even in confined spaces, the MiR600 enables you to significantly optimize your logistics processes. Together with the powerful MiR1350, the MiR600 is the first AMR with IP52 protection rating on the market. Thanks to its increased resistance to dust particles and water droplets, the MiR600 can also be used in more demanding environments than other AMRs. Serial no. 102003026 Stock ID 13948825 Kjdpfx Ajzu Itxsiijdr

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For businesses facing the next stage in their growth journey, there is now a unique opportunity to invest in a used AutoStore system with 15,600 bins and a total of 46 Red-Line robots. This comprehensive AutoStore system, integrated by Swisslog, combines high capacity, scalability, and proven performance in a package that rarely becomes available on the market. The system was installed in 2021 and is located in the USA, making it particularly suitable for companies with high order volumes, growth ambitions, or a need to consolidate warehouse flows. System Overview Grid: Double-Double Dimensions: approx. 24.1 x 24.8 m Height: approx. 5.5 m Number of bins: approx. 15,600 Bin size: 600 x 400 x 330 mm Robots & Capacity 46 RedLine robots 39 charging stations Ports & Flow 3 Relay Ports 8 Conveyor Ports Costs for dismantling/assembly and integration are additional. Kdedpfx Aiozc Hbljisr We can assist in finding suitable integration partners among the various options available on the market. Contact us for a full specification and any other questions you may have.

Year of construction: 2024, condition: new, The mini pallet shredder is ideal for shredding small and/or dismantled pallets. Kdedpjpahwvefx Aiijr

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Kjdpfx Aiox Ari Hjiodr Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow Kdodjwv U N Sjpfx Aiijr ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: used, Year of construction: 2011, 🧰 Product Features • Manufacturer: Jungheinrich • Model: EKS 110 Z 280 ZZ • Option: 120 • Condition: Used, see photos • Color: yellow - anthracite • Year of manufacture: 2011 • Operating hours: 4855 h • Lifting height: up to 3600 mm • Rated load capacity: 1000 kg • Unladen weight: 2070 kg • Battery weight: 504 kg • Battery voltage: 24 V • Drive power: 2.8 kW • Load center distance: 600 mm 💰 Price € 1,890,- net, excl. VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Kedpfx Aijyzr U Noisdr Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Changes and errors in technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse equipment in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer truckloads of goods for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & UTILIZATION For dismantling and clearance orders, we offer a real all-round carefree package: 1. Fixed price purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Execution of auctions on behalf of customers. Our full service with our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete clearance. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2006, Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data - Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) - Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) - Year of manufacture: 2006 - Machine type: crate palletizing and depalletizing line - Capacity: 33,000 bph (160 bottles per layer) - Pallet format: Euro - Crate formats: 5x4 - 400x300x300 mm / 6x4 - 400x300x270 mm / 5x4 - 400x300x210 mm / 4x3 - 355x275x345 mm / 4x3 - 400x300x330 mm / 5x4 - 355x275x255 mm / 5x4 - 400x300x290 mm Ksdpfx Aiozk I N Sjijdr - Controls: Siemens SIMATIC S7 PLC, B&R Power Panel HMI with ACOPOS servo drives, Danfoss VLT 5000 frequency drives, SEW MOVIDRIVE Equipment - Palletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Depalletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Logipack vertical pallet strapper - Pallet and crate roller/slat conveyors - Layer-forming / grouping table - Unloading table - Pallet magazine - Separate BMS-branded control cabinet - Safety fencing with light-curtain guarding Condition Used - complete, still installed; no longer in production (line stopped). Availability Available immediately. Location: Germany. Can be visited on request. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, functionality: fully functional, operating hours: 28,922 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: ByVision, laser type: fiber laser, laser source manufacturer: MaxPhotonics, laser hours: 9,467 h, laser power: 8,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 169 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of input current: three-phase, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, Bystronic ByAutonom 3015 – Fiber laser cutting machine (retrofit 2024) A very complete and production-ready flatbed laser cutting machine from Bystronic. Built in 2014, it was fully converted in 2024 from CO2 to a modern 10 kW fiber laser (MaxPhotonics), including CE declaration for the conversion. The machine is currently in production and combines the robust Bystronic platform with an automatic pallet changing system and a high degree of automation with the speed and low operating costs of fiber technology. Technical specifications: • Brand / model: Bystronic ByAutonom 3015 • Year of manufacture: 2014 – fiber retrofit 2024 (with CE declaration) • Laser technology: fiber 10 kW – MaxPhotonics • Cutting head: RayTools BS08K smart cutting head with autofocus • Working area: 3,000 x 1,500 mm • Pallet changer: automatic pallet changing system, changing time approx. 22 s, load capacity 890 kg per pallet • Cutting capacity: steel up to 25 mm (O2, up to 40 mm possible), stainless steel up to 25 mm (N2), aluminum up to 20 mm, brass up to 20 mm • Dynamics: simultaneous 169 m/min, acceleration 30 m/s² • Accuracy: position deviation 0.1 mm/m, repeatability accuracy 0.05 mm • Control system: Bystronic ByVision with 22" touchscreen • Operating hours: approx. 28,922 hours machine / approx. 9,467 hours laser production Equipment / options: Kdedpfsznt I Uex Aiier Automatic nozzle changer (40 positions), automatic nozzle centering with collision detection, filter system (DFPRO 6-3000), conveyor belt for scrap and small parts, extra laser protection windows front and side. Included: All documentation (digital), support & assistance, certified pre-purchase inspection, webshop with discount account. Optional (turn-key delivery possible): Dismantling, transport (including insurance), installation, base plates & anchoring, CAD/CAM software (advanced), extended warranty, smart factory connection, machine & software training, FastCal calculation software and portal. Interested in this machine? Please contact us for more information, a viewing, or a price indication.

Condition: used, Year of construction: 2014, Overview This robot-palletizer was built in 2014 from German manufacturer Kuka. The machine has 2 different gripping heads for the handling of KEG´s and plastic crates. It´s equipped with 6 axes and is in a good condition. The machine was serviced every year and dismantled in 2025. Kdsdpfsyb Rycjx Aiior Technical Details - Capacity - Depend on layer formation - Equipped for the handling of: - KEG´s - Modul crates