Used Pallet Wrap for sale (7,251)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change Pgsdpfx Abez Ir Haj Tou FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) Psdjz Iprtjpfx Ab Togu F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program Pgsdpfoz Ipr Hjx Ab Tju F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: used, Year of construction: 1995, machine/vehicle number: 9503264, Palettenstretchmaschine - Pallet Wrapping Machine W&W EFA5 1450Year 1995 - Serial-No. 9503264-943-3144 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Pjdpfeh Axr Djx Ab Togu On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: Pgjdez Irr Aopfx Ab Tou - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: good (used), functionality: fully functional, For sale is a pallet wrapper from Strapex, model Delta SWS 18. The unit has been dismantled for transport, but is fully operational and ready to use after reassembly (example image shown is the original manufacturer's image). Technical Data: • Turntable diameter: 1800 mm • Maximum stretch wrapping speed: 10 rpm • Weight: 350 kg • Manufacturer: Strapex • Maximum load weight: 1500 kg • Power supply: 220 V • Wrapping options: - Top sheet wrapping - Bottom wrapping - Top wrapping - Cross wrapping - Spiral wrapping Transport and loading can be organized Europe-wide at an additional cost, upon request. All prices are exclusive of VAT. An inspection is possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machine purchase & sale Psdpfxewza Dxo Ab Tjgu PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For more information or contact options, please visit our website.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Pedpfx Absz Ip S Hj Tjgu Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, product height (max.): 2,200 mm, product length (max.): 1,500 mm, product width (max.): 1,500 mm, input voltage: 230 V, working height: 2,200 mm, CYKLOP CST 212 pallet wrapper, semi-automatic packaging machine Foiling of palletized goods with stretch film, for loads of different sizes and weights. Manufacturer: CYKLOP CST 212 Type Wrapping machine (Avvolgitore) Year of manufacture: 2020 Turntable diameter: 1600 mm Turntable speed: 4 - 12 rpm Turntable speed can be adjusted in several stages The starting height of the foiling can be adjusted in several stages Pallet height sensor Rainproof program Load: Length/width: Max. 1000x1200 Height: 2.2 meters Pallet weight: max. 2000kg Weight: 645 kg Frequency: 50/60 Hz Total current consumption: 10 A Voltage: 230, 1-Phase, 50/ 60 Hz Power supply: 0, 85 kW Podpfx Aow Tzdvob Tsgu

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Pedsz Iqnvjpfx Ab Tjgu Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: excellent (used), Fully automatic pallet wrapper with film pre-stretching Inventory No. 3974 Manufacturer: Matco Type: B 200 * Year of manufacture: 2016 * Turntable positioning via fixed stop * Number of bottom and top wrapping cycles * Turntable diameter: 2000 mm !!!! * Max. wrapping height: approx. 2700 mm !! Pgedpfx Abjz Rq Rwo Tsu * Own weight: approx. 550 kg * Very good condition * Suitable for Euro pallets and block pallets!!! * Ramp

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm Podpfx Asz Ipnheb Tegu ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 1988, condition: good (used), In good condition. Pgodozdz Tkjpfx Ab Tou

Year of construction: 2010, condition: excellent (used), Automatic pallet wrapper with film pre-stretching Inventory no. 3928 Psdoychv Dopfx Ab Tjgu Manufacturer: ProtoWraptor Type: PLUS - IDP * Turntable positioning via fixed stop * Number of top and bottom wraps * Turntable diameter: 1650 mm !!!! * Max. wrapping height: approx. 2400 mm !! * Own weight: approx. 450 kg * Suitable for Euro pallets and block pallets!!! * Ramp!!! * In very good condition.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Podpfxjz Irx Ns Ab Togu Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MARATHON04, MARATHON semi-automatic manual film wrapper TECHNICAL DETAILS The world's only "PATENTED" non-electrically powered mobile stretch wrapper, capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight and size The use of pre-stretched film with a roll diameter of max. Ø 230 mm is recommended Min. load dimensions: 650 x 400 mm Min. load weight: 50 kg Wrapping height (including pallet) 2000 mm Easy to operate without having to rely on the power of a motor Manual movement by the operator The film carriage is moved up and down manually The machine features simplified functions Replaces hand wrapping MANUAL CHANGING OPTIONS Podpfxsz Ipirs Ab Tsgu The operator is the motor, windings up and down freely selectable FILM SLIDE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 230 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless Other systems available from the Ludwigsburg warehouse.

Condition: new, Year of construction: 2024, functionality: fully functional, SEMI-AUTOMATIC TURNTABLE, FOR PALLET WRAPPING WITH STRETCH FILM Power Prestretch Pallet Wrapper from the UK agent for Noxon Upward-downward carriage speed Top and bottom reinforcement wraps Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Pgsdpfsxwa I Tox Ab Tou Upward-downward cycle Only upward cycle Manual cycle Self learning cycle Altimeter and photocell delay 6 recordable programs N-Connect: remote wifi connection for machine total control

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Pgodpfxsz Iqtfo Ab Teu Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Podpfx Asz Ipcleb Tjgu Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, fully automatic Matco pallet wrapper including Top Sheetdispencer. 1 x Matco automatic Rotary arm. 1 x Matco top sheetdispencer. 5 x roler conveyor with a total length of approximately 10 meters 1 x Cyclop binding machine. XP112 including: safety light curtains security fans pallet loading position control panel. Pedpfx Ajy Uwk Asb Tegu possible pallet height up til 2400 mm. for more information please get in contact.

Condition: excellent (used), Automatic pallet wrapper Inventory No. 3809 Manufacturer: Cyclop Type GL 200-11 * Turntable positioning via fixed stop * Number of top and bottom wrapping cycles * Turntable diameter 1650 mm Psdpfx Ajy T Ialsb Tjgu * Max. wrapping height approx. 2400 mm * Own weight approx. 450 kg * Suitable for Euro pallets and block pallets!!! * In very good condition

Condition: excellent (used), Automatic pallet wrapper Inventory No. 3810 Manufacturer: Cyclop Type GL 200-11 * Turntable positioning via fixed stop * Number of top and bottom wrapping cycles * Turntable diameter 1650 mm * Max. wrapping height approx. 2340 mm * Weight approx. 450 kg Pgjdpfoy T I S Usx Ab Tsu * Suitable for Euro pallets and block pallets!!! * In very good condition

Condition: used, For sale: Matco A316L prea pallet wrapper with turntable and powered pre-stretch system. Sturdy machine in good condition and fully checked. Specifications: Pjdpfx Aboyuqv Do Tsgu • Turntable pallet wrapper • Powered pre-stretch system • Height sensor • Machine has been inspected and operates well Note: The keys on the display are not fully responsive, but the start and stop buttons work fine, so the machine can be used normally. Additional information: * Language: Dutch * Sale with invoice * Machine located in Harfsen (NL) Optional: * Ramp * Stretch film Any questions or want more information? Feel free to send a message. Trade-in possible: Trade-in of (defective) pallet wrapper is negotiable. Check my other ads as well. Keywords: pallet wrapper, film wrapper, wrapping machine, pallet wrapping machine, wrap machine, robot wrapper, wrapping robot, robot wrapper, wrapper, film wrapper

Year of construction: 2008, condition: good (used), functionality: fully functional, Pallet wrapper FILMA FP10 CP260 used, from site closure Year of manufacture: 10-2008 Maximum load: 1500 kg Turntable diameter: 1.5 m with access ramp Price net plus VAT, free loading onto truck Transport dimensions: 2.42 x 1.50 x 0.80 m Pedpfxozu Nb Rs Ab Tsgu

Year of construction: 2022, condition: new, ROBOPAC WRAPMAN Stretch film wrapping machine with friction film carriage and manual tension adjustment. New machine – showroom model Pjdpfx Abeytb Ius Tegu • Max. roll diameter: 1.80 m • Max. pallet height: 2.00 m • Dimensions: 2,518 mm x 1,012 mm x 570 mm • Total weight: 116 kg

Year of construction: 2019, condition: excellent (used), Automatic pallet wrapper Film pre-stretching Inventory no. 3828 Manufacturer: Certis Type C-ONE Pgsdpfx Abezadbws Teu * Year of manufacture: 2019 * Turntable positioning via Fix-Stop * Number of top and bottom wraps * Turntable diameter: 1650 mm * Max. wrapping height: approx. 2200 mm * Own weight: approx. 450 kg * Suitable for Euro pallets and block pallets!!! * In very good condition