Used Panhans 690 B for sale (91)

Condition: excellent (used), Year of construction: 2006, heavy duty thickness planer Panhans 436 DH 400 with large table extension Gtedpfx Aex Nrvcjbrsu Planing width: 630 mm Planing height: 250 mm Electric height adjustment with tenth-millimeter tip switch – digital Tersa cutterhead Table guided on four points Main motor: 7.5 kW Feed speed: 7 + 14 m/min Rubber infeed and outfeed rollers, floating Segmented pressure beam made of solid aluminium, floating Location: ex customer site - immediately available -

Condition: excellent (used), Year of construction: 1988, Gebr. Panhans Mortising Machine Type: 116 - School Model - Dowel hole drilling unit: pitch 16, 22, 25, 32 mm Two-lever operation Mitre angle stop Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm 2 hold-downs: manual Extraction port: 100 mm Machine length: 1280 mm Gsdpfx Aex Nrg Uebretu Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 1982, Panhans Mortising Machine Type: 116 – School Model – Two-hand operation Dowel hole drilling unit: spacing 16, 22, 25, 32 mm Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg Gsdpox Nrhrjfx Abrjtu - immediately available -

Condition: used, Year of construction: 1979, Spindle tiltable: No Height adjustment: Handwheel Cutter jaw adjustment: Manual Height indicator: Scale Fence indicator: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed display defective Motor power: 5 / 6 kW Motor brake: Yes, manual Gjdsyffx Uepfx Abrotu Extraction connection: 120 mm Machine length: 2500 mm Machine depth: 900 mm Weight: 800 kg

Condition: good (used), Year of construction: 1980, Table dimensions 1.100 x 760 mm Motor output 4,7 kW Spindle diameter 30 mm Gtodpexzuwwefx Abrou reus 3.000/4.500/6.000/9.000 U/min

Condition: good (used), Year of construction: 1981, Manual height and swivel adjustment of the milling spindle Gtjdpfjycczzjx Abrju Control panel positioned on top Table size approx. 1100 x 760 mm Table height approx. 865 mm Motor power 4.7/5.7 kW Spindle speeds 3000/4500 / 6000/ 9000 rpm Height adjustment approx. 150 mm Space requirement approx. 1300 x 1100 mm Weight approx. 850 kg Further technical details on request All data taken from a brochure, therefore all information is provided without guarantee.

Condition: used, Year of construction: 1971, Knife block Z = 2 planer knives, planing width 520 mm Gtedpfev I Eatox Abrou Storage location: Nattheim

Condition: good (used), Year of construction: 1998, still well-preserved panel saw Gjdpfx Abox Sdrhorstu max. cutting length 3200 mm Price ex location, not dismantled, Austria, Linz area

Condition: used, Year of construction: 1991, Table size: 1100 x 760 mm Table height: 870 mm Cutter spindle mount: MK 5 Speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening swivel plate diameter: 450 mm Swivel range: -5° to +45° Weight: approx. 850 kg Storage location: Supplier Gedpfx Abjx It Ansrjtu

Condition: used, Heavy-duty thickness planer Panhans 436 Gtodpfxox U S Rds Abreu Planing width: 630 mm Planing height: 250 mm Electric height adjustment with tenth-millimeter touch button – digital Tersa cutter block Table with four-way guidance Main motor 7.5 kW Feed speed: 7 + 14 m/min Segmented infeed and outfeed rollers made of rubber, oscillating Segmented pressure beam made of solid aluminium – oscillating Machine is FULLY REFURBISHED IN WORKSHOP, IN EXCELLENT CONDITION Available from stock Lieboch

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Gjdpfx Aeyfxa Esbrjtu

Condition: used, Year of construction: 1997, machine/vehicle number: 3073, functionality: fully functional, input voltage: 400 V, input current: 34 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 60 mm, cutting width (max.): 2,850 mm, saw blade diameter: 125 mm, saw blade bore: 30 mm, rotational speed (max.): 2,870 rpm, total length: 5,430 mm, total width: 5,040 mm, total height: 1,640 mm, overall weight: 3,150 kg, cutting length (max.): 3,200 mm, compressed air connection: 6 bar, feed length Y-axis: 3,200 mm, feed rate Y-axis: 40 m/min, main saw diameter: 280 mm, saw drive: 7,500 W, Equipment: scorer, Used plasterboard saw with extraction system for sale For sale is a plasterboard saw with integrated extraction system, year of manufacture 1997. The machine is used but in good condition. Details: - Year of manufacture: 1997 - Condition: Used, but good - Including extraction unit - Location: DE 93326 Abensberg - Inspection under power possible by appointment Important information: - Sale exclusively to commercial buyers. Gtjdpfxsyfg Rls Abrju - Sale without any warranty. - All information provided without guarantee. If you are interested or have questions, please contact us to arrange a viewing appointment.

Condition: used, Year of construction: 1989, with positioning control and Tersa cutterblockcleaned, function tested, test run- machine lubricated- test run- infeed rollers renewed- outfeed rollers renewed- rubber lip front and rear renewed- test planingspare parts:Panhans feed rollers, overhauled controlused, good conditionmake Panhanstype 435year of construction 1989Masch.-Nr. 170GS-testedmotor 5,5 kW / 0,25 kWplaning width approx. 510 mmplaning height approx. 250 mmlink pressure beamrubber infeed rollerrubber outfeed rollerfeed 7/14 m/ber of knives 4 piecesknife systemTersa reversible kniveselectric height adjustmentautomatic positioning controlsound insulationexhaust connection D 160 mmspace requirement approx. 1100 mm x 1200 mm x 1200 mmweight approx. 950 kgtotal connected load approx. 5,75 kWstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Gjdpfx Abjvwfbierotu

Condition: used, Year of construction: 1989, with electrical height and swivel adjustment   used, great condition Panhans make Type 688 Year of manufacture 1989 Machine no. 287 GS-approved Motor 5.5 kW brake Cutting width approx. 1250 mm Gtodpfx Abovxr Sqjrju Cutting length approx. 2700 mm swiveling up to 45 ° Scoring unit Parallelogram protection Electric height adjustment Electric swivel adjustment Angle stop as a miter stop Extraction connection D 120 mm / 80 mm Required space approx. 2800 mm x 3400 mm x 1400 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty

Condition: used, Year of construction: 1987, Sawblade tiltable 45 ° Gedpjvyuqrefx Abrstu Length of the rolling table 3200 mm cutting width 1000 mm Motor output 5,5 kW weight of the machine ca. 1000 kg

Condition: used, Year of construction: 1993, with Centro-Fix reversible blade Machine cleaned, lubricated, partially repainted made operational, functionally tested fully adjusted Test run Various parts replaced: Gtedpfx Asv Hht Tsbrsu 4x Tersa blades Rubber guard Used Make: Panhans Type 426 Year of manufacture: 1993 Machine no. 1399 GS wood dust tested Motor 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Table guide rollers: 2 adjustable Articulated pressure beam Steel feed roller Rubber feed roller 2 feeds Number of knives: 4 Centro-Fix reversible knives Digital display for planing height Electric height adjustment with handwheel fine adjustment Sound insulation Extraction connection D 160 mm Space requirement approx. 1300 mm x 1100 mm x 1100 mm Total connected load approx. 8.5 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: used, Year of construction: 1986, From a model shop Used, excellent condition, little used Make: Panhans Type 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Top control panel Planing width: approx. 510 mm Infeed table length: approx. 1600 mm Removal table length: approx. 1150 mm Auxiliary stop Slotted/low-noise table lips Number of knives: 4 Blade system: Strip planer knives Chip thickness indicator Hollow-pointed joint Automatic brake Hollow-pointed joint adjustment Gtsdpfxswhqw Nj Abrju Extraction connection: 140 mm diameter Space required: approx. 2800 mm x 800 mm x 1200 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 1986, from model making workshop Machine fully cleaned, lubricated, completely readjusted, partially overhauled Planer knives replaced, Drive belt replaced, Table slats replaced, Test run with planing Knives sharpened and installed Used, excellent condition, low operating hours Manufacturer: Panhans Model: 426 Year of manufacture: 1986 Machine no.: 670 GS-tested Upgraded motor: 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Adjustable table feed rollers Gedowhqw Aopfx Abrstu Segment pressure beam Segment infeed roller Feed speed 7–14 m/min Number of knives: 4 Knife system: strip planer knives Digital display for planing height Electric height adjustment with fine handwheel control Extraction connection D 160 mm Space requirement approx. 1200 mm x 1000 mm x 1400 mm Weight approx. 1150 kg Location: 97447 Gerolzhofen, free loaded on truck, unpacked Delivery in current as-inspected condition, without warranty or guarantee.

Condition: used, Year of construction: 1998, Used, in top condition Make: Panhans Model: 76 Year of manufacture: 1998 Machine No.: 648 Original price approx. €4,800.00 Location: 97447 Gerolzhofen, loaded free, unpacked Handover in as-inspected condition, without warranty or guarantee Gedoxuv Nzopfx Abrotu

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Gtedpfx Absr Eli Tjrou Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1995, used, in good condition, low hours, top equipment Manufacturer: Panhans Model: 116H Year of manufacture: 1995 Machine No.: 640 GS wood dust tested 2-lever operation Drill chuck 20 mm Dowel boring device with 4 stops 45° continuously adjustable mitre fence Mobile 2 pneumatic workpiece clamps Pneumatic height adjustment with foot pedal Extraction connection D 100 mm Godpfoxgu Uasx Abretu Required space approx. 950 mm x 1000 mm x 1300 mm Weight approx. 200 kg Storage location: 54634 Bitburg, free loaded, unpacked Handover in current condition as inspected without guarantee or warranty

Condition: excellent (used), Planer 510 mm, 3 m, with Suva guard Gedsxv Dirspfx Abretu

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Gtsdpfxsx N Dhdo Abrju Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Model: 240 Year of construction: 1991 The electrical detection of the actual angle value does not function. Table: 260 x 80 cm Power: 11 kW Gtjdpfjx Tgtwjx Abrju Swivel range: -5° to +45° Angle adjustment: Electric Height adjustment: Electric Speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Incl. power feed unit

Condition: used, Type 693 Euro5 Year: 1996 General data Cutting length: 3200 mm Cutting width: 2650 mm Max. cutting height: 60 mm Main saw Speed: 2870 rpm Power: 5.5 kW Max. Ø280 mm Scoring saw Speed: 2850 rpm Power: 1.1 kW Max. Ø125 mm Godoyac Ebepfx Abrotu Total connected load: 8 kW Machine weight: 3150 kg