Used Paper Cups for sale (3,429)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. Dksdpjyv Iqvefx Affjk HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, Technical data: Distance between axes d. Grinding wheel - axis of the column: 300 mm Max. distance table - grinding wheel: 280 mm Largest grinding surface: 140 x 300 mm Rapid feed per speed: 2 Fine adjustment by micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Speed of the grinding wheel: 2840 1/min Spindle motor power: 2.2 kW Dkedpfxjvnriuj Affek Electric pump power: 0.06 kW Weight: 400 kg Dimensions: 850 x 850 x 1650 mm Equipment: - Cast column on adjustable ball roller bearings - Wet grinding device - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (first set) - Grinding wheel protection and Table enclosure - Operating and maintenance instructions - CE declaration of conformity

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Canon Booklet Trimmer F1. Item for sale: 1 x Canon Booklet Trimmer F1: Suitable for various Canon models. We also have other finishing options and printing machines in stock. Please feel free to contact us! Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Dksdpeytciaofx Affek For more information, please feel free to contact us personally.

Condition: ready for operation (used), Year of construction: 2013, A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, filling capacity: approx. 3000 cups/h, filling volume: 850ml/1000ml. The control system and the servo systems of the machine were dismantled and are missing. Documentation available. An on-site inspection is possible. Dodpfx Asyx H Ewsffokk

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 2,800 mm, Box On Demand, endless corrugated cardboard, pay attention to your CO2 footprint. The machine listed here for processing endless corrugated cardboard belongs to the series of static machines, meaning cross-machine operations are performed while the cardboard remains stationary. The machine is designed for high productivity. The maximum working width for cartons is 2,800 mm. All tool settings are adjusted automatically. 1) Main machine body (automatic carton cutting unit): - Linear cross-cutting unit for head-foot cuts and cross-cuts on the cardboard. - Linear cross-creasing unit for cross-creasing the carton. (Available as a cross-creaser, or as a cross-creaser with perforation feature.) - 8 longitudinal creasing units from above for longitudinal creases on the cardboard. - 8 longitudinal cutting units for executing the longitudinal cuts. 2) Carton changer, 4-way cassette feed The motor-driven carton changer, operated with a lifting axis, uses 4 separate cassettes to feed cardboard into the main machine body’s infeed. Each cassette can accommodate raw material web widths up to 2,800 mm and feeds them automatically to the main machine body upon request from the machine control system. The third cassette can accommodate two working widths. Dkodpjyxw Agsfx Affek 3) 5-way carton magazine Five carton magazines supply and feed the raw cardboard to the processing machine. Stack heights of endless corrugated cardboard up to 1,500 mm are possible. 4) Control Cabinet, Controls, Electronics: Includes all components required to operate and control the system. Control cabinet components are based on Siemens technology.

Year of construction: 2009, condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available Dkjdpfx Afjl D T D Tofok CEE machine, incl. complete documentation

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, cutting width (max.): 560 mm, cutting length (max.): 790 mm, overall weight: 7,000 kg, working width: 560 mm, We offer this refurbished Gietz FSA 790 machine, type: paper cutting machine, year of manufacture: 1989. Manufacturer: Gietz Model: FSA 790 Year of manufacture: 1989 Condition: refurbished Machine type: paper cutting machine If you have any questions or require additional information, please contact us by message or phone. Max sheet size: 790 x 560 mm Temperature control: up to 200° C Max pressure: 150 tons Speed: 5,500 cycles/hour Power consumption: 7.3 kW Heating power: 9.5 kW Weight: 7,000 kg 3x electronic longitudinal foil feed control Works with foil on 1’ cores Capability for both longitudinal and cross foil feed relative to sheet travel 6 heating zones 3 transverse drives 3 longitudinal drives Dksdjygkxcopfx Affsk 2 die mounting plates – honeycomb type High-speed suction feeder Machine is in excellent condition, fully overhauled. The electrical cabinet has been modernised to current standards and fitted with the latest control system (automatic contactors). Die-cutter mounting frame included.

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Dsdpjyyy Dpofx Affskk Machine weight: 1200 kg

Condition: good (used), Item: AJ-Hamba BK6005/5 Filling machine for cups HAMBA BK 6005/5 cup filling and sealing machine Dkodpfx Afoi Atkqjfek Made in Germany In good used condition. The machine can be used for filling yogurt and similar products in cups. Capacity: 8000 - 10000 cups/ h Lanes: 5-Lanes longitudinal machine Actual Cup-size: Ø 75 mm Height: 90 mm Main Filler: - manufacturer: Hamba - filling range: 100 cm³ to 250 cm³; - cleaning: CIP-able Closure: Sealing Date Device: Stamp Measurements (lxwxh): 4,3 m x 1,3 m x 2,2 m Power: 380 V; 21 A; 8 KW

Condition: good (used), Polar Mohr 137 X Paper Cutting Guillotine The machine is fully operational and in very good condition. After inspection and is ready to use. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1370mm Stack height: 165mm Programmer with touchscreen display Djdpfsyur Nxjx Affekk Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Side tables Additional rear table guards Weight: 4150kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: good (used), Polar Mohr 92 ED Paper Cutting Guillotine This machine has been serviced and is ready to use. This is the most respected guillotine brand, a flagship product. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with color display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables. Knife change via the control panel Weight: 1890kg 380V power supply Dsdpfxoyur Hds Affskk Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: good (used), Nagel Citoborma 111 Paper Drill This machine is 100% functional and in very good condition. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Dkodpfx Afoyur E Hjfsk Sturdy construction – weighs 35 kg. This is one of the newest Citoborma drill models, currently in production. 230V power supply Drill bit diameter: 2-9 mm Stack height: 50 mm Includes drill bits, a new cutting stick, and instructions. Made in Germany.

Condition: good (used), Muro 1002 Paper Jogger Description: The jogger is designed for aligning collected sets of forms, brochures, and printing sheets. The motor speed is adjustable. The jogging cassette tilt angle is 45°. Technical specifications: Dkodoyur Dpjpfx Affsk Format: 43 x 43 cm Stack height: 10 cm External dimensions: 60 x 60 cm Power supply: 230 V Weight: 40 kg

Condition: used, Year of construction: 1998, Graf Opat G66 Industrial Paper Guillotine, 660mm Wide Cut Area, Repro-Gram Control Panel, Light Guard Protection, Two Hand Push Button Operation. S/No. 135 (1998) Location: This lot is located in Birmingham, UK. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to you invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Dkedpfxoyuvw To Affjk

Condition: excellent (used), Year of construction: 2012, Width 550 Dksdpfxoyzbhxj Affsk Touch screen

Condition: good (used), Equipment 2 knives Dkedofbgayepfx Affjk

Condition: used, Year of construction: 2011, Machine number 8161027 Built in 2011 Max. paper length 12 cm Max. paper width 78 cm Air table Yes Side table left Yes Side table right Yes Photo cells Yes Length x width x height 2000.0 × 2280.0 × 1700.0 Dedpsxx Tu Asfx Affskk Weight 1300 kg

Condition: ready for operation (used), Feeding depth max 1.500 mm Feeding height max 155 mm Table height 870 mm Cutting width 1.500 mm Front table length 750 mm Equipment • program Dkedpfjd Iapyex Affjk • air table • side table right • side table left • light barrier • 2 knives

Year of construction: 2004, condition: good (used), Built in: 2004 Cutting width: max 2.600 mm Feeding height: 160 mm rear table length: 2.600 mm Front table length: 725 mm table height: 900-925 mm side table size: 750x570 mm machine depth: 4.180 mm Machine width: 4.400 mm Machine height: 1.720 mm continuous knife cycle rate: 40 hydraulic pressure: 1,5-65 kN minimum cut without false clamp: 40 mm Speed: 17,8 kW Weight: 8.900 kg Dkjdopfb Rtspfx Affek Equipment • chromed air table • side table right with air • side table left with air • digital program • program with color- display • 2 knives

Condition: good (used), Year of construction: 2002, Format trimmed: max 300 x 400 mm, min 85 x 115 mm Untrimmed format: max 320 x 460 mm, min 100 x 125 mm Output: max 6,600 c/h Equipment: - Fully automatic infeed with integrated stack counter - Cut counter - Cutting blower - 1 set of pressing plates and holders - 1 set of plate tables - 3 sets of cutting bars - 2 sets of knives - External device for knife change with setting gauge - Central lubrication - Operating instructions Dodpfx Afjqqkvqefjkk - Electrical circuit diagrams - Standard tools - Standard accessories

Condition: ready for operation (used), Cutting width max 2.200 mm Dkodpfxod Ewdue Affok Feeding height max 140 mm Feeding depth max 1.750 mm Front table length 750 mm Table height 890 mm Equipment • side table left • 2 knives

Condition: ready for operation (used), Cutting width max 1.550 mm Feeding height max 165 mm Feeding depth max 1.550 mm Front table length 750 mm Table height 890 mm Equipment • program with monitor Dkodpfx Asd Iaqusffok • air table • side table right with air • light barrier • optical cutting line indicator • retractable side gauge right • 2 knives additional units • jogger Baumann BSB 6 L, • unloading system Baumann BA6, standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Year of construction: 1985, condition: ready for operation (used), Built in 1985 Dkedpfxod Iap Ie Affek Cutting width 1.550 mm Front table length 750 mm Table height 890 mm Feeding depth max 1.550 mm Feeding height max 165 mm Equipment • program with 12" monitor • air table • side table right with air • side table left with air • light barrier • optical cutting line indicator • retractable side gauge right • 2 knives Standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Year of construction: 1987, condition: ready for operation (used), Built in 1987 Cutting width 1.550 mm Feeding depth max 1.550 mm Front table length 750 mm Dkedpfed Iaqijx Affjk Table height 890 mm Feeding height max 165 mm Equipment • digital program • air table • side table right • light barrier • optical cutting line indicator • 2 knives • ASE automatic waste disposal standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue

Condition: ready for operation (used), Size 400 x 300 mm Equipment 4 spindle Dksdpfx Afod Hrmtjfek