Used Pasta Machine for sale (64,744)

Condition: good (used), Year of construction: 1994, Short/ Nest Line Bjdpfx Apsh Dxgze Esdf Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product 12. Comand pult 13. El Cabinetsž NOTE - Action price - 30.000 EUR

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: L23001388, overall weight: 208 kg, tank capacity: 14 l, type of cooling: water, input voltage: 380 V, Semi-industrial machine designed for mixing dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to producing short pasta, long pasta, and dough strips. Suitable for medium-scale pasta production as well as feeding dough strips to cutters or nest-shaping machines. All parts in contact with dough, as well as the entire structure, are made of stainless steel. The mixers and screw are easily removable for cleaning. Equipped with an automatic cutter with a full set of knives. Additionally, I am offering a new set for penne pasta production for sale (2200 euro). Bdodpsw Av Snjfx Ap Eef

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13/15, Equipment: documentation/manual, DRYER FOR FRESH PASTA, FRUIT, NUTS ESC100 Dryer that allows the wrapping, pre-dressing and drying of short, long and stuffed pasta, as well as the drying of pasteurized pastes before a possible packaging. Capacity for drying cycle: 100 kg approx Bsdpfxstrd N Ee Ap Esdf Panels injected with hot injected polyurethane foam, with high thermal stability, in white pre-painted sheet Electric heaters for air heating (1,2 Kw x 3 = 3,6 Kw) 500 mm axial fan for forced air circulation (1 Kw approx.) Electrical panel with PLC board for setting and checking drying phases N ° 2 Butterfly valves controlled by Belimo electric actuator Probe for internal humidity control Instrumentation for checking drying and temperature times controlled by an EC-compliant electrical panel with programmable digital electronic card N ° 25 frames in fir wood 600 x 1200 mm, with polyester mesh and aluminum sealing bars N ° 1 Stainless steel trolley on wheels Technical data Voltage: 400 V – Three-phase Total power: about 5 Kw Dimensions Depth: 1000 mm (+ 300 mm above the door) Width: 1670 mm Height: 2260 mm (+ 400 mm humidity extractors)

Condition: excellent (used), Year of construction: 1990, Short Pasta Production Line - Braibanti line Cobra 1.15 single-head press with 460 mm of capacity, 3 vibrating levels, Romet 8-meter wrapping machine with 24 sectors, dryer loading elevator. 9-level, 13-meter, Teless dryer and single-level belt cooler. Year - 1990/1991 Bdsdoy Hfz Topfx Ap Eof Capacity - 1000 kg/h .

Condition: ready for operation (used), Year of construction: 2010, Technical Details : - Year - 2010 Bdjdpfx Apeyyapfj Esf - Capacity - 300 kg/h Complete line with automatic packing unit ! Perfect condition

Condition: excellent (used), - Dimensions (LxWxH): 500x300x250 mm - Output: 4-6 kg - Serial Number: L17000531 Iiedjwyc Ukscu T Rxiei - Year: 2017 - Voltage: 400V - Power: 0.65 kW Bdjdpfswyc Ukjx Ap Ejf - Weight: 27 kg - Condition: New, never used The listing was translated automatically. Translation errors are possible.

Condition: good (used), Year of construction: 1997, Industrial Pasta Mixer / Extruder Dominioni Punto & Pasta PT100 – Stainless Steel – 380V General Information Manufacturer: Dominioni Punto & Pasta Model: PT100 Year of Manufacture: 1997 Country of Origin: Italy Condition: Used – good working condition Availability: Immediately available Machine Description Industrial pasta production machine manufactured by Dominioni Punto & Pasta (Italy), model PT100. The machine is designed for fresh pasta production and dough processing in professional food production environments. Suitable for: fresh pasta production, dough mixing and kneading, pasta dough preparation, food laboratories, pasta factories, industrial food processing. The machine is made entirely of food-grade stainless steel and built for continuous industrial operation. Equipped with: large stainless steel mixing hopper, industrial extrusion outlet, electrical control panel, emergency stop button, heavy-duty industrial drive system. Technical Specifications Model: PT100 Machine Type: Industrial pasta mixer / extruder Capacity: approx. 100 liters Voltage: 380V / 3-phase Construction: Food-grade stainless steel Year: 1997 Manufacturer: Dominioni Punto & Pasta Made in: Italy Bsdpjy Uczaofx Ap Esdf Advantages Professional pasta production equipment Heavy-duty industrial construction Fully stainless steel machine Reliable Italian manufacturing Easy cleaning and maintenance Suitable for continuous production Ideal for pasta workshops and food factories Machine Condition The machine is in good working condition and can be inspected/tested on site. Normal signs of use according to age. Sold as shown in the pictures. Included electrical control panel, extrusion outlet, accessories visible in the photos. Additional Information Upon request, we can provide: working video, additional photos, additional technical information.

Year of construction: 2002, condition: like new (used), Panaroma Bjdpfx Ajd R D Tvsp Eodf AT400 Pasta stacking and cutting machine 2002, Stainless stacking and cutting machine, 400mm width, designed to roll, to dust, to cut and to overcome the pasta sheet layers, suitable for lasagne or tagliatelle. Output up to 100Kg / hour, variable speed, with timer, 3ph, mobile

Condition: like new (used), Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile Bdedpfx Aed R D Tljp Eof

Condition: ready for operation (used), Year of construction: 2015, A Brazilian machine, with good representation in London, for the production of filled pasta is available. Two intermeshing augers for the dough, one auger for the filling. Capacity: 20kg-100kg/h. Formats: savory or drop, kibbeh, pillow, ball and croquettes. Compared to Italian ravioli machines, this machine can work with considerably moister doughs and fillings. The machine works accurately to the gram while adhering to the original recipes. Dimensions X/Y/Z: 650mm/1150mm/1400mm, weight: approx. 200kg. Documentation available. Bedpfxotryk Ej Ap Ejdf

Condition: ready for operation (used), Year of construction: 2021, An industrial pasta system Juwel for large-scale production of noodles and similar products is available. Components: drying cell TS-120, noodle machine Pressquick PQ6-SU and noodle machine Pressquick PQ3-SU. Drying baskets: 100, kettle capacity: 12kg, daily capacity: approx. 500kg, hourly capacity: approx. 50kg, total system dimensions X/Y/Z: approx. 2000mm/900mm/2100mm. Documentation available. An on-site inspection is possible. Bedpfx Apswd Tafo Eedf

Condition: used, Year of construction: 2014, operating hours: 300 h, functionality: fully functional, machine/vehicle number: CH03333, product width (max.): 80 mm, A complete pasta production line is for sale. The setup is designed for fresh pasta, dried pasta, and ravioli production. With these machines, you can produce up to 1,000 kg of pasta per day, of which approximately 200 kg can be dried directly. The machines are in very good condition. Included: - Pasta press with all dies: spaghetti, penne, casarecce, pappardelle, tagliatelle, fusilli, gigli, cavatelli - Ravioli machine with 3 formats: ravioli, panzerotti, and rondelli - Cooling system for the machine - Conveyor belt - Mixer - Cutting conveyor - Dryer - Grids/racks Bdodpfx Apsxykyxo Ejf

Condition: excellent (used), functionality: fully functional, We offer the Vortex D2 Duo – a fully automatic cook, quench & chill machine designed for the continuous and repeatable cooking, quenching, and chilling of food products. This solution features a DUO design, in which the cooking section is mounted on a separate frame from the quenching and chilling sections, ensuring a very high level of separation between high-temperature and low-temperature processes. The Vortex D2 Duo model was developed primarily for processing short and long pasta, but thanks to its versatility, it is also ideal for products such as rice, noodles, legumes, grains, vegetables, potatoes, and seafood. As a result, the machine can operate in both pasta and ready-meal production facilities, as well as in modern convenience food plants and among producers of salads and chilled components. The Vortex D2 Duo has a capacity ranging from approximately 250 kg/h to 4000 kg/h, allowing the system to handle both medium and very high production volumes. The Vortex is equipped with a programmable Vortex water flow system, which ensures uniform cooking, cooling, and chilling of each product batch. This system minimizes clumping, product damage, and yield losses, and its highly efficient cooling typically achieves a product temperature of approximately 3°C. The Vortex D2 Duo can operate with conveyor feeding or with automatic batch loading of product into containers, which facilitates precise control of throughput and process organization. Additionally, vibrating dewatering conveyors enable operation in both batch and continuous modes, allowing the line to be easily adapted to subsequent production stages such as mixing, dosing, packaging, or final cooling. Bdjdjy Df Nrjpfx Ap Eof Also noteworthy are design solutions that enhance process quality and hygiene, such as hydraulic basket lifting, shell-and-tube heat exchangers, double degreasing overflows, and specially shaped water tanks. Hygienic, stainless steel construction and washdown-ready protection, which is of great importance in facilities operating under high sanitary standards. Key advantages of the Vortex D2 Duo separate frames for the cooking and cooling sections, high-quality separation of high- and low-temperature processes, ideal for short and long pasta, as well as rice, vegetables, potatoes, grains, pulses, and seafood, capacity up to 4000 kg/h depending on configuration, programmable Vortex water flow system, highly effective product cooling to approximately 3°C, capability for batch and continuous operation, hydraulic basket lifting and efficient drainage, hygienic, industrial design for continuous operation. Vortex D2 Duo is an advanced production line for manufacturers seeking consistent cooking, rapid cooling, high throughput, and excellent final product quality in a modern pasta and convenience food production process

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, Bsdpfx Aozqr Hnjp Esdf 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11876, travel distance X-axis: 1,524 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 584 mm, quill travel distance: 127 mm, quill diameter: 105 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 40 rpm, table width: 355 mm, overall weight: 3,750 kg, table load: 850 kg, XYZ SMX 5000 CNC Bed Type Milling Machine Model: SMX 5000 S/No.: 11876 Year: 2013 Control: ProtoTrak SMX Table Size: 1930 x 355mm Travels (X,Y,Z axis): 1524 x 596 x 584 Quill Diameter: 105mm Max. Quill Travel: 127mm Bdjdoznkkajpfx Ap Eef Spindle Taper: 40 ISO Spindle Speed Range: 40 – 5000 RPM Spindle Motor Power: 7.5 HP Max. workpiece weight: 850 kgs

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: Bdodpfszgwq Dox Ap Ejf X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Bsdpfozmyzfsx Ap Eodf

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Bodpjyhdi Rofx Ap Eodf Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Bdsdpfsznwu Sex Ap Esf Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha Round Corner Machine Bdsdpfx Asyzi Iaop Eof Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Bdodpfx Apjzl S T Rj Eof Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. Bsdjzlgbpjpfx Ap Ejdf The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work. Bdsdpfx Aozlaimep Ejf

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards Bsdpfx Apezlahio Esdf – Operating tools and instructions with documentation.

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: Specification Value Manufacturer X-TEK Systems Ltd., England Model RTR160UF Type Ultra Focus X-Ray System Max. X-ray voltage 160 kV Max. power 60 W Focal spot size 5 (Ultra Focus) Manipulator 50 kg, 5 axes Power supply 230 VAC, 50/60 Hz Serial number RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, likely designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging. Bjdpozl Scrjfx Ap Eodf