Used Milling machines (window production) for sale (109)

Year of construction: 2000, Condition: used, 5-axis machining center in very good condition, which can be tested by arrangement Max. processing length: 6,600 mm Y-axis travel: 800 mm Z-axis travel: 500 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 360° Max. Speed 24,000 rpm Spindle power: 7 kW Tool changer with 9 standard and 1 special tool (saw blade up to 250 mm) minimum quantity spraying Tensioner detection and automatic displacement 8 pneumatic material clamps Light barrier protection Gxcyh0I Manual control console Windows operating system Spindle in very good condition (approx. 6,600 spindle hours) Loading is included in the price Weight: approx. 6,500 kg

Year of construction: 1983, Condition: used, Aluminum single spindle copy router make ELU type AS 70 make # 70425, year of manufacture 1983 Technical data: Milling length 250 mm milling width 100 mm largest clampable profile width 170 mm B3Qomrjnmw largest clampable profile height 100 (135) mm milling spindle speed approx. 12000 rpm. collet diameter 8,0 mm drive power 740 W power supply 380 V / 50 Hz Compressed air f. Clamping and spraying 150 l/min at 5 - 8 atü outer dimensions 720 x 650 x 1440 mm weight approx. 100 kg used, as on stock

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, CNC machine 0verHead M40 with CAN control Year of construction: 2018 Optical condition: used Technical condition: good Prefabricated CNC machine for direct sale! -frame construction with protective housing -OverHead M40 - LES5 Travel range X/Y = 1210/910 -Please note that the travel range may vary due to any attachments -Control cabinet (1200x600x300mm) incl.4-axis control IMD CAN EC-Servo -X-axis motor EC60TM/ 200 Watt / 48 Volt -Y-axis motor 2x EC60TM/ 200 watts / 48 volts -Z-axis motor EC60TM/ 200 watts / 48 volts - with brake -iOP-TFT + swivel arm + keyboard + iPC 25-F5 with Win 10 IoT Enterprise LTSC 2019 -Z-clearance: 340mm -Z-axis travel 310mm -Spindle pitch X/Y-axis: 10mm/10mm -Spindle pitch Z-axis: 5mm -Slot clamping table 1600x1250 mm -Vertical sliding door: front -Underframe with decorative panels -Win-Remote software For operation, service and maintenance purposes, you require additional clearance when setting up the machine, based on the machine dimensions: -control cabinet side min. 1000mm -all other sides at least 500mm -to ceiling height min. 300mm Machine connection values (OverHead) -Electrical connection: 400V/16 50/60Hz -Air consumption of pneumatic options: (all approximate values) -Tool changer (WW): 50l/min pulse -Minimum quantity lubrication: 180l/min -Internal air cooling of milling spindle: 150l/min (depending on spindle type) -Cool-Min external: 150l/min (5µm and 1µm filter required) Blow-out at WW: 50l/min pulse (depending on spindle type and WW) -Compressed air connection: (min.7.5 bar permanent) 8 bar (dried and cleaned air according to ISO 8573-1, classes 2, 4, 3)) Mounted accessories: -iSA 2200 milling spindle with 2.2kW and automatic tool change function 4-fold tool change SK 20 -Minimum quantity cooling spray system Current equipment: -Please note that the travel distance may vary due to any attachments -Control cabinet (1200x600x300mm) incl.4-axis control IMD CAN EC-Servo -X-axis motor EC60TM/ 200 Watt / 48 Volt -Y-axis motor 2x EC60TM/ 200 Watt / 48 Volt -Z-axis motor EC60TM/ 200 watts / 48 volts - with brake -iOP-TFT + swivel arm + keyboard + iPC 25-F5 with Win 10 IoT Enterprise LTSC 2019 -Z-clearance: 340mm -Z-axis travel 310mm -Spindle pitch X/Y-axis: 10mm/10mm -Spindle pitch Z-axis: 5mm -Slot clamping table 1600x1250 mm -Vertical sliding door: front -Underframe with decorative panels -Win-Remote software For operation, service and maintenance purposes, you require additional clearance when setting up the machine, based on the machine dimensions: -control cabinet side min. 1000mm -all other sides at least 500mm -to ceiling height min. 300mm Machine connection values (OverHead) -Electrical connection: 400V/16A 50/60Hz Air consumption of pneumatic options: (all approximate values) -Tool changer (WW): 50l/min pulse -Minimum quantity lubrication: 180l/min -Internal air cooling of milling spindle: 150l/min (depending on spindle type) C8M2Kighu -Cool-Min external: 150l/min (5µm and 1µm filter required) Blow-out at WW: 50l/min pulse (depending on spindle type and WW) -Compressed air connection: (min.7.5 bar permanent) 8 bar (dried and cleaned air according to ISO 8573-1, classes 2, 4, 3))

Year of construction: 2024, Condition: new, CNC machining center with 5 controlled axes designed for machining for milling, drilling, tapping and notching of long parts and short parts in aluminum, PVC and steel. There are 3 different models: 4 m, 7 m and 9 m, with 2 different working methods: Single zone machining along the entire length of the machine or tandem operation with two independent zones. The milling spindle with 8,5 KW power in S1 with HSK-F63 tool holder allows also the machining of challenging applications in the industrial field. In all versions, thanks to the combination of the A and C axes, the milling spindle can be positioned at any angle of +/- 90°for the A axis and +/- 320° for the C axis. The machining center has a rotating tool magazine (disc magazine) with 10 tool places, located on the moving column of the X axis, with the possibility of storing standard milling cutters and side milling cutters with a maximum diameter of 180mm. The 450mm saw blade with HSK-F63 tool holder is stored separately in a special tool storage area and can work with the 5 interpolated axes of the milling spindle to perform any type of saw cuts, shifter cuts and notches on the profile. Depending on the length of the machine, 4 or 8 pneumatic clamps are installed, which are automatically positioned with the moving column of the X axis or independently with a separate CNC axis (as an option). In this version it is possible to pull apart the profile after sawing through, in order to perform face machining between the profile. See also our used stock machines from Emmegi, Elumatec, Pressta Eisele etc. P2Kgn

Year of construction: 1994, Condition: defective spare-parts repository (used), Machine/vehicle number: 20 048 M100390 130003048, movements x/y/z: gross/klein 6500/300 mm spindle turning speed range: 5400 rpm number ob tool positions: 8 pieces Ptvbci7 carriages: x/y u. z 60/30 mm/miin spindle drive: max. 5,5 kW The machine is sold as a spare part carrier because the controller is defective. electrical connection: 400 V kW space needed: 8600 x 2270 x 2150 mm weight: ca. 5000 kg

Condition: like new (used), Year of construction: 2020, Operating hours: 5,200 h, Functionality: fully functional, Machine in really good condition Beiwhpi

Year of construction: 2009, Condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,300 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm Lvapfk7 A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. Speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Saw blade diameter: 500 mm minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Spindle in very good condition Loading is included in the price Weight: approx. 11,500 kg

Year of construction: 2010, Condition: excellent (used), ALUMA PANTO 10 MILLING AND COPIING MACHINE Icveqpysl MILLING AND COPIING MACHINE ALUMA PANTO 10 YEAR 2006 MILLING AND COPIING MACHINE ALUMA PANTO 10 YEAR 2006 PANTOGRAF TWO-AXIS x AND y MILLING MACHINE FOR MILLING FOR ALUMINUM DOOR HANDLES AND HINGES

Condition: good (used), Year of construction: 2015, Equipment: Rotational Speed Infinitely Variable, CNC machining center with 4 controlled axes, for machining bars or pieces of aluminum, PCV, light metals in general steel up to 3 mm. Automatically positioned clamping unit. It is equipped with a tool magazine with 8 places, with the possibility of housing 2 angle machining devices and a milling blade, for machining on the 5 surfaces of the workpiece. The presence of the rotating work table (NC axis) allows working at any angle from - 90° to + 90°, and on the two heads with double angle unit, with the table at 0°. All CNC axes are absolute and do not need to be reset when the machine is restarted. The vise system features an automatic X-axis positioning system, which makes it very easy to position each vise unit to clamp the profile. The position indication and control of the correct positioning of the vices are controlled by NC, with the information displayed directly on the control screen. Ct9Oc2Dxy X-AS (longitudinal) (mm) 4300 Y-AS (transverse) (mm) 270 Z-AS (vertical) (mm) 300

Year of construction: 2024, Condition: new, CNC machining center with 4 controlled axes designed for machining drilling and milling on profile bars or single parts made of aluminum, PVC, light alloys and steel with a thickness of 2 mm. The working area in the P104 version with a pneumatic zero stop allows the machining of profiles up to 3.2 m long. (other models on request). The milling spindle with a power of 5KW, can machine the profile at any angle between 0° and 180° over the entire machining length thanks to the rotary axis (4th axis). The centers have a tool magazine with 8 tool places. G3v2oi0p The clamping of the profile is ensured by 4 pneumatic clamps. See also our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc. 8T7J2X8War

Year of construction: 1987, Condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Ytgxak Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, Machine in working order - in continuous use. The center allows automatic processing with applied milling units, combined with innovations such as sliding tensioners and rotary grippers, of the most diverse types of profiles, such as for windows, doors and facades. Possibility to demonstrate the operation of the machine on site. Bof0Gqjcbow Dimensions 20000x3000x4000mm.

Year of construction: 2009, Condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Y-axis travel: 850 mm Cwxmnu2Qiq Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm. Weight: approx. 4,500 kg Windows operating system minimum quantity spraying Tensioner detection and automatic displacement angle head Additional tool magazine Pendulum operation through two light barrier areas Loading is included in the price

Condition: good (used), Year of construction: 2002, Operating hours: 9,227 h, Functionality: fully functional, Travel distance X-axis: 7,280 mm, Travel distance Y-axis: 525 mm, Travel distance Z-axis: 380 mm, Overall weight: 4,900 kg, Spindle speed (max.): 24,000 rpm, Input voltage: 230,400 V, Type of input current: AC, Equipment: Documentation/Manual, Machine in very good condition and in perfect working order. Cwpwr00Zwa

Year of construction: 1980, Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine Mvvosw -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270kg

Year of construction: 2010, Condition: excellent (used), Functionality: fully functional, The QUADRA L1 consists of an automatic loading magazine and a gripper feed for profile lengths of up to 7500 mm. The feed transports the profile bar to the processing unit, which is equipped with 6 spindle motors and can carry out drilling and milling operations around the profile. The sawing module has 3 axes and is equipped with a saw blade with a diameter of 600 mm. The finished part is transferred from the machining area to the unloading table by means of an unloading unit, where it is transported to the unloading position by means of driven belts. The processing area is completely enclosed and can optionally be fitted with sound-absorbing mats. Automatic loading magazine with a maximum capacity of 15 profiles with a width of 100 mm. The profiles are transported to the gripper position by a belt conveyor. Automatic 3-axis CNC feed unit. Based on profile data, the unit positions itself in the pick-up position depending on the length and profile cross-section in order to feed the bar for processing. The gripper clamps the profile bar at a predefined position based on the drawing. Bk2Xt0Ywv7U A 600 mm saw blade enables a large cutting range to be covered thanks to the 3-axis movement option.

Year of construction: 2001, Condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining Bo72Ttwr8E

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Support table can be rotated between 0° and 180°, enabling 3-sided machining in a single clamping operation 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Km8Zce9X Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Weight: approx. 320 kg Travel milling length 300mm Travel milling width 130mm Operating pressure 6.5-7 bar

Year of construction: 2007, Condition: used, Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Max. profile height: 190 mm Max. cutter package height: 95 mm Pneumatic material clamps Spray device Dppxzd

Year of construction: 2006, Condition: good (used), 3-axis / 5-sided machining with ISOLA soundproof cabin for aluminum, PVC and steel profile bars The machine has two processing zones and 2 tool magazines, which can be used individually in pendulum mode or both together for loading over the entire processing length (multi-part operation). Kwf2Lfsk The clamps can be positioned on the left and right independently of the processing head. Travel paths: X - axis: 7000mm Y - axis: 300mm (+ 113mm of the movable work table) Z - axis: 350mm P - axis: 3500mm (for left-hand clamp positioning) H - axis: 3500mm (for right-hand clamp positioning) 8 clamping elements (4 clamps per machining zone) 12 tool holders (6 holders per changer magazine/machining zone) incl. Camplus software 2 angle heads

Year of construction: 2007, Condition: used, Max. machining length: 2,600 mm Czwo2Ci9Nw Y-axis travel: 315 mm Z-axis travel: 230 mm Milling spindle speed infinitely adjustable between 2,800 and 12,000 rpm Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping X and Y-axis CNC controlled, Z-axis continuously lowerable by motor 4 pneumatic material clamps Manual tool change Minimum quantity spray device USB port operation manual Accessories as per photo

Year of construction: 2013, Condition: good (used), Machining center with 3 CNC-controlled axes for machining profile bars or parts made of aluminium, PVC, non-ferrous metals and steel up to 3 mm. The machine has an 8-position tool changer in which tools can be stored for machining on the workpiece. It is also equipped with a movable work table, which makes it easier to load and unload the workpiece. This has significantly increased the maximum profile cross-section that can be machined. With the "PHANTOMATIC T3A" machining center, aluminium and steel profile bars can be machined from 5 sides depending on the tools used. PROGRAMMING THE MACHINE All machining operations can be programmed quickly and easily thanks to the "CAM-EDITOR-DRILL" software package, which was specially developed by EmmegiSoft. This software runs under Microsoft® Windows® XP Embedded, the operating system of the CNC control, and is an essential component of the simple, easy and quick-to-learn operation of the machining center. Technical data AXIS TRAVELS - X-axis (longitudinal) (mm) 4300 - Y-axis (transverse) (mm) 270 - Z-axis (vertical) (mm) 300 TRAVEL SPEED - X-AXIS (m/min) 56 - Y-AXIS (m/min) 22 - Z-AXIS (m/min) 22 AXIS ACCELERATION - X-AXIS (m/sec²) 4.6 - Y-AXIS (m/sec²) 1.8 - Z-AXIS (m/sec²) 1.8 MOTOR SPINDLE Dpqtrr - Max. Power in S1 (kW) 7.5 - Max. Speed (rpm) 18000 - Tool holder HSK - 63F - Quick tool clamping - Air cooling with electric fan AUTOMATIC TOOL CHANGER with 8 places FUNCTIONS Multipiece mode MACHINABLE PROFILE SIDES - With tool without angle head (top side of profile) 1 - With angle head (lateral profile sides and end faces) 2 + 2 - With saw blade (profile top side, lateral profile sides and end faces) 1 + 2 + 2 WORKING RANGE (base x height x length) (mm) Max. Dimension of the workpiece that can be machined on 1 profile side in standard clamping device with tool length (A) L = 70 mm plus tool holder (B) L = 116 mm: 210 x 270 x 4000 Max. Dimension of the workpiece that can be machined on 2 profile sides with tool length (A) L = 70 mm plus tool holder (B) L = 114 mm and tools with angle head L = 48 mm: 180 x 230 x 4000 Max. Dimension of the workpiece that can be machined on 3 profile sides with tool length (A) L = 70 mm plus tool holder (B) L = 114 mm and tools with angle head L = 48 mm: 145 x 230 x 4000 TAPPING MACHINE (with tap on aluminum and through-hole) - With compensating chuck M8 FEEDING THE PROFILE - Pneumatic reference stops 2 WORKPIECE CLAMPING - Standard number of clamping elements 4 SAFETY EQUIPMENT AND PROTECTIVE DEVICES - Full protective cladding of the machine with accident protection cabin MACHINE FRAME - Made of electro-welded steel PROCESSING UNIT - Carriage frame Double container for the use of different lubricants: - Minimum quantity spraying device (oil) - Spray metering device (water and oil emulsion) OPERATION AND CONTROL - Control cabinet with ventilation - Pneumatic control center - CNC PC with Intel® processor - Graphic 15" LCD TFT color display - Keyboard - 256 MB RAM memory - USB ports - RJ45 network card SOFTWARE - Microsoft® Windows® XP Embedded - CAM - EDITOR - DRILL

Year of construction: 2007, Operating hours: 4,470 h, Condition: excellent (used), Functionality: fully functional, Very well-maintained machining center with only 4,470 operating hours! 3-axis / 5-sided machining with ISOLA soundproof cabin for aluminum, PVC and steel profile bars The machine has two machining zones and 2 tool magazines, which can be used individually in pendulum mode or both together for loading over the entire machining length (multi-part operation). The clamps can be positioned on the left and right independently of the processing head. Travel paths: X - axis: 7000mm Y - axis: 300mm (+ 113mm of the movable work table) Z - axis: 350mm P - axis: 3500mm (for left-hand clamp positioning) Bimuj8Y08Z7 H - axis: 3500mm (for right-hand clamp positioning) 8 clamping elements (4 clamps per machining zone) 12 tool holders (6 holders per changer magazine/machining zone)

Condition: good (used), Year of construction: 1998, For milling transom and door profiles made of aluminum and plastic With hydropneumatic feed of the milling blade Cvetitfexg Large milling range up to 400 mm Stepless table height adjustment Tools up to 280 mm diameter can be used Material stop can be swiveled to the right and left up to 60 Notches up to 30° (acute angles left and right). Locking at 90° with index pin Two attachment positions for material stop Flexible thanks to horizontal and vertical pneumatic material clamping Depth stop for four different notching depths Dosing spray device

Year of construction: 2023, Condition: new, Machining center with 5 controlled axes for milling, drilling, tapping and notching of long and short parts made of aluminum, PVC and steel. Machining length max. 7000mm, alternatively 2 independent zones in pendulum mode. among others with Cywc8Rjzj0 spindle 11kW tool magazine with 16 places Manual control unit with cable Extra 90° sawing unit with saw blade D 500mm