Used Peel Line for sale (10,073)

Year of construction: 2020, condition: like new (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Lsdpfxow Sfg Eo Ah Sjhk Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Lsdew R T Diepfx Ah Sshk Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: Multiple on request, Continuous Potato Peeling Line – Tong Engineering & Sormac Equipment This continuous potato peeling line combines reliable Tong Engineering handling equipment with efficient Sormac peelers to create a complete solution for high capacity potato processing. Designed for consistent product flow and dependable performance, the system is well suited to processors looking to streamline their peeling operation. The equipment moves potatoes smoothly from cleaning and peeling through inspection, treatment, and final product safety checks. With trusted machinery from Tong and Sormac, this line delivers both efficiency and durability in demanding production environments. Ledpfsytn H Dsx Ah Sjhk Equipment Included Tong Engineering De-Stoner The process begins with a Tong de-stoner, which removes stones, soil, and heavy debris from incoming potatoes. This stage protects downstream equipment and ensures cleaner product enters the peeling process. Two Sormac Continuous Peelers The line includes two Sormac continuous peelers designed for high capacity peeling while minimising product loss. These machines efficiently remove potato skins while maintaining consistent throughput for industrial potato processing operations. Tong Engineering Surge Tank A Tong surge tank regulates product flow between processing stages. This buffer helps maintain a steady supply of potatoes through the system and prevents bottlenecks during production. Tong Roller Inspection Table The Tong roller inspection table allows operators to visually inspect peeled potatoes and remove defects. Rotating rollers spread the product evenly, improving visibility and making quality control easier. Tong Dip Tank with Dosing Unit A Tong dip tank with integrated dosing unit allows potatoes to be treated with anti-browning or preservation solutions. This step helps maintain product appearance and supports shelf life after peeling. Loma IQ3S Metal Detector The final stage of the continuous potato peeling line is a Loma IQ3S metal detector, which checks the finished product for metal contamination and helps meet food safety standards. Key Benefits Complete continuous potato peeling line for commercial processing Combination of Tong Engineering handling equipment and Sormac peelers Designed for efficient stone removal, peeling, inspection, and treatment High throughput suitable for industrial potato processing Integrated metal detection for product safety Reliable equipment built for demanding production environments Suitable Applications This equipment is ideal for: Potato processing facilities Fresh produce packing operations Ready meal manufacturers Vegetable processing plants Enquiries If you are interested in this continuous potato peeling line, please get in touch for further information, pricing, and availability. The system offers a dependable solution for large-scale potato processing. Five individual lines available We hold a wide range of new and used food processing machinery in stock, some of which may not be showing on our website. If you have any additional requirements please get in touch

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Wyma Vegetable peeling/polishing line. To consist of; Dolav bin tipper Lodozaa Iyspfx Ah Sjhk Wet hopper Vege-peeler with Auger (can have the auger removed for just polishing) Roller inspection table Water recycling unit All machinery is stainless steel. Machinery is decommissioned and ready for shipping

Condition: used, Year of construction: 2020, functionality: fully functional, Complete Used Peeling Line Ledpfowak Aiex Ah Sjhk Complete used peeling line for sale, two available. This line was installed in 2020 and decommissioned at the start of 2025. Each line was previously doing up to 14 tonnes of product a week, can be used for potatoes, carrots, swede, parsnips etc. Each line consists of: Bin tipper dimensions (with frame) approx 2.670 m wide x 1.91m tall x 2.240 m long Large boat hopper. Conveyor belt width 500mm x belt length 1900mm long Elevator with hopper into peeler 3700mm high x 400mm wide Vegetable/potato batch peeler Waste water unit Surge tank with water sprayer Roller inspection table 900mm wide x 2.9m long Incline slatted conveyor Belt 400mm wide x 2800m long Surge tank 600mm wide x 2.3m long Dip Wheel Drywhite container Weigher & bagger with metal detector Also includes waste conveyors and all associated control panels. This can be sold as two complete line, one complete line or as individual machines depending on your requirements.

Condition: new, Year of construction: 2026, Feeding capacity: 40 [kg]. Capacity: up to 240 [bulbs/min]. Raw material size: 45 - 120 [mm]. Lhjdpoq Edcgefx Ah Sek Total width of the machine : 1700 [mm] Total height of machine : 2200 [mm] Total length of machine : 9500 [mm] Number of working paths: 4 Loading height of onion: 1000 [mm] Height of onion pick-up: 850 [mm] Height of waste pick-up: 400 [mm] Power supply: 3 x 400 [V] / 50 [Hz]. Installed power: 3 [kW] Compressed air connection: 8-10 [bar]. Air consumption: 1.9 [m3/min]. Noise level: Above 80[dB] Construction material: Acid-resistant steel and plastics approved for food contact CE certificate: yes Cutter: Yes

Condition: excellent (used), functionality: fully functional, Kiremko, Agrico Potato Peeling Line Comprises: - Kiremko Steam Peeler: With feed hopper: approx. 2400 x 3000 x 6000 mm Equipped with feed screw conveyor: length approx. 6000 mm - Agrico Two-Way Peeler: Equipped with screw conveyor - Double-Brush Machine (Type AT-OBC-2500): Lodoyku Hropfx Ah Sehk Working length: 2500 mm Equipped with screw conveyor - Discharge system and filtration: Discharge screw conveyor: length 2500 mm Collection tray / filtration unit with pump: approx. 1550 x 1070 x 1160 mm Platforms are not included A complete, industrial-grade potato peeling line constructed entirely from stainless steel, designed for high-capacity processing. The system utilizes state-of-the-art Kiremko steam peeling technology, which, when combined with the two-way Agrico peeler and brush machine, ensures maximum raw material cleanliness with minimal product loss. An extensive system of screw conveyors guarantees fully automated material flow between processing stages. The line is equipped with its own filtration and water recovery system featuring a high-performance pump, enabling operational cost optimization.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms Lhedstzmifspfx Ah Sjk -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating Heating processing temperature: over 300°C possible MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Sound level: 71 dB(A) Year of drive manufacture: 2022 Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Lhedpfxjzr Hz Ao Ah Sek Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Lodetiy Ntjpfx Ah Sjhk Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Lhsdpszt H Rajfx Ah Sjk Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Main layout attached Lhsdpfx Ahexmr Rre Sok

Condition: used, Type Production Line Radiator production line Further information can be found in the attached PDF document. Accessories, tools, and clamping devices shown are included in the scope of delivery Lsdpozpbl Defx Ah Sjhk only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DESCRIPTION: Complete production process: hydraulic uncoiling, guided feeding, roll forming, hydraulic post-cutting, and automatic run-out/stacking. Lodpfx Aszvaiboh Sshk Profile-specific tooling for TR153 / 290 / 870 high-profile sheets. Full mesh safety guarding around the main forming section. Siemens PLC/HMI control and Schneider frequency-controlled main drives. Profile: TR153 / 290 / 870 Standard sheet thickness: 0.70-1.50 mm Feed coil width: 1,500 mm Overall / effective width: 900 mm / 870 mm Profile height / pitch: 153 mm / 290 mm Maximum profile length: unlimited Working speed: 15 m/min Location of the line: Serbia

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Ledsi Akrkopfx Ah Sehk Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours Lodpfxjycwvao Ah Sjhk 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer 5. Conveyor system 6. Conveyors system The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder Ledpjdkf I Tjfx Ah Sohk -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Lhodjzl Tb Nopfx Ah Sok Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Add seasoning / water etc to complete the recipe Mix in the mixer grinder for 3 to 5 minutes Mince out through a 5 mm to 8 mm hole plate into a tote bin. Ruhle Guillotine Scansteel Giraffe Feeder Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Product ready for the next stage vacuum filler / tray depositor / burger former etc

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, SUMMER DISCOUNT DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Lhjdjgmhxajpfx Ah Ssk Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment SPRING DISCOUNT

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line Ledop T Tghspfx Ah Sjhk

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lhjdpfx Astqmwgjh Sjk Lubeca LW303 can seamer

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021 ! Machine with interchangeable vertical and horizontal milling heads with automatic indexing. The machine can be inspected by appointment. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system Lhodpozfbi Isfx Ah Sjk EQUIPMENT: - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management - CE marking Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE . Ledpfx Aoy Uk A Seh Sehk

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS Lodpoymzxyofx Ah Sshk WIDTH: 450 mm

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Lsdpfx Ajymzzuoh Sshk Width: 260 mm