Used Plaster Sprayers for sale (165)

Condition: like new (used), functionality: fully functional, Year of construction: 2006, For sale is a Strojstav MPCS 4 dry shotcrete and guniting machine that has never been used and is in like-new condition (Year of manufacture: 2006). This high-performance machine has 0 operating hours and has been stored securely, offering the build quality and performance of a brand-new machine at a highly competitive price. It is designed for transporting and applying dry concrete mixtures and refractory materials. Technical Specifications & Features: Condition: Like new / Never used (0 operating hours) Year of Manufacture: 2006 Application Method: Dry shotcrete / guniting (pneumatic dry conveying) Feeding Options: Supports standard bagged materials or large-volume Big-Bags using an auxiliary feeding frame. Bwsdpfx Akjz Akvrsnju Mobility & Chassis: Heavy-duty wheels with a front-steered twin-axle system for easy manual positioning on-site. Control System: Integrated, user-friendly control station directly on the machine for safe and precise operation.

Condition: used, Year of construction: 2020, operating hours: 2,563 h, power: 192 kW (261.05 HP), Equipment: air conditioning, all wheel drive, cabin, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Fendt Rogator 655D sprayer Registration date: May 20, 2021 Production unit: .563 Pump hours: 1,500, sprayer hours: 695 Transmission: 40 km/h 2 rotating beacons 8 headlights at the top front, 6 headlights at the bottom front Work lights at the top rear Full cab with air conditioning, Category 4 Joystick control 2 monitors / Varioterminal 10.4" 2 camera systems Air conditioning Radio, Bluetooth, USB port, hands-free phone system 2nd seat Refrigerator and warming cabinet 3" suction hose 3" high-performance pump system Bjdpfx Akez Edlvenswu Stainless steel centrifugal pump 785 L/min 5-way valve, stainless steel, electric 1 Agromie basic package Contour Assist 2 water connections on the driver's side at the bottom for supply and drainage 2 partial widths 18 and 36 m / nozzle bar Dualtec 2+2 Rinsing gate Electric tank level sensor Spray nozzles 0.5 at the front + fertilizer nozzle behind it Nozzle XRC11003-VP set, 75 pcs 2 sensors on each side for slope compensation Large tank 6,000 L, rinsing tank 500 L Air compressor with pneumatic system Mechanical ground sensor Optisonic boom height control Variable Tecontrol Varioguide RKT Novatel Emergency steering Optisonic height control Central lubrication Hand wash tank and soap dispenser on the driver's side at the bottom Small storage compartment under the cab on the driver's side Retractable step with storage area Storage compartment on the passenger side at the bottom Both axles steerable Trailer coupling 2-wheel, 4-wheel Tires: Allianca Agriflex IF 480/80R50, front approx. 60%, rear approx. 80% 2 track widths, Optitrac hydraulic track adjustment Price: € 165,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are subject to change.

Condition: excellent (used), mileage: 713,168 km, power: 228 kW (309.99 HP), first registration: 06/2005, fuel type: diesel, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, Year of construction: 2005, = Additional options and accessories = - PTO = Remarks = Water tank: Yes WMAH24ZZ05W060373 YEAR OF TRAILER: 2002 = More information = Empty weight: 12.935 kg Carrying capacity: 13.065 kg GVW: 26.000 kg Water tank: Yes Technical condition: very good Visual appearance: very good Registration number: MPL6995 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam Bedpfx Akjymp Trenowu IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 168,247 km, first registration: 11/1979, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 5,700 mm, total width: 2,230 mm, total height: 2,860 mm, Year of construction: 1979, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Usable material: Bitumen Suspension: Leaf suspension Front axle: Steered Number of cylinders: 6 Number of chambers: 1 Pump: Yes Technical condition: Very good Optical condition: Very good Bedpfxowizq Aj Aknewu Please contact Thierry Leemans for further information.

Condition: used, Year of construction: 2000, power: 157 kW (213.46 HP), Equipment: all wheel drive, cabin, More data and images will follow! Bwedpfjw Nfb Rsx Aknju More photos and details coming soon! -----Internal vehicle number: 12255 Errors and prior sale excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 16002, Pump capacity: Adjustable from 1 to 55 liters per minute, depending on the application. Control: Equipped with a 7-inch color touchscreen and smart sensors for monitoring water and mortar temperature, pressure, and humidity. Advanced technology: Patented mixing tools ensure a homogeneous mass without lumps. Maximum particle size: Can process materials with a particle size of up to 6 mm. Smart maintenance: Built-in MAIiCONNECT software for remote diagnostics and software updates. Bjdpfezu Rynex Aknjwu

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING body FEDERAL Emulsion / Asphalt Sprayer Note: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the cab! • Manual transmission • Differential lock Bodewmpcnopfx Aknowu • Long-distance cab • 1 bunk • Leaf/leaf suspension • Tyres: 12 R 22.5 (alternative: 315 / 80 R 22.5) • Tank capacity: 6,000 litres emulsion • Burner NEW! • Spray bar foldable on both sides! Errors and prior sale excepted! = More information = Fuel type: Diesel Mileage: 67,000 km Applicable material: Asphalt Damages: Damaged vehicle (not drivable)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Plastering machine EPA 479 with turning station, travel direction from left to right, computer and monitor renewed in 2023. Bsdpfjz Diztox Aknowu

Year of construction: 1980, condition: used, Compressed air sprayer, Sprayomat, pressure sprayer, small quantity lubrication, minimum quantity lubrication, plant protection sprayer -Manufacturer: Lüfa-Werke, compressed air sprayer Sprayomat -Type: SM 21 -Engine: AEG 0.25 kW -Container: with level indicator -Dimensions: 590/320/H910 mm -Weight: 56 kg Bsdpetpyrkofx Aknowu

Year of construction: 2011, condition: ready for operation (used), A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible. Bedpfx Akjyn N Aponswu

Condition: used, Year of construction: 2014, With paper web and belt conveyor with web cleaning.System consisting of: 1. Feeding conveyor 2,000 mm 2. Spraying machine 3,630 mm 3. Take-off roller conveyor 2,000 mm - Total length: 7,630 mm - Operator side: leftItem 1 Feeding belt: - Manufacturer: Venjakob - Model: Belt Conveyor AL - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min. - Max. load: 15 kg/m - Length: 2,000 mm - Motor power: 0.5 kW - Variable-frequency drive (VFD) controlledItem 2 Automatic Spray Machine:Can be operated with either the belt conveyor system or the paper belt conveyor system!- Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 920 mm ± 20 mm - Operating side: left - Suitable for solvents and water-based coatings - Price for a refurbished machine - As-is condition; machine has not been refurbished - Spray gun drive in Duo configuration - Dry extraction - Exhaust port diameter: 400 mm - Exhaust air flow rate: 7,000 m³/h - Feed speed: infinitely adjustable ~ 2.5–5 m/min - Light curtain, part detection, Type LS 25 - Touchscreen control - Paper belt transport system - Belt squeegee and cleaning system Type R1 - Number of paint circuits installed: 2 - Number of spray guns installed: 4 - Quick-change system for spray guns - Spray guns, Type Kremlin Airmix AVX - Airmix spray system - Number of paint pumps: 1 - Pump manufacturer: Wagner Cobra 40/25 - Length: 3,630 mm - Width: 3,450 + 990 mm - Total power consumption: 16 kW - Location: not in stock - Voltage fluctuations: max. ±5%Item 3 Acceptance of roller conveyor: Bjdpfxezv Tfve Aknowu - Manufacturer: Venjakob - Type: Roller conveyor - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min - Max. load: 15 kg/m - Length: 2,000 mm - Roller spacing: 150 m - Variable-frequency drive controlled Images are for illustrative purposes only; they are not originals*

Condition: excellent (used), Year of construction: 2000, WIWA high-pressure pump 235.42R / 38042, year 2000 With high delivery capacity, ideal as a feed pump for airless sprayers (suitable for medium and low viscosity coating materials) Bwedpfx Akethcfljneu Material guide in stainless steel (suitable for water-based paints) Transmission ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Delivery rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm The devices are very little used! Technically and visually in very good condition. ATTENTION: the price of EUR 1.900,- (net) is for 1 device !!!

Condition: excellent (used), functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2024, operating hours: 25 h, machine/vehicle number: 24168, The inoCOMB Cabrio small silo is used for mixing and conveying pumpable (mineral or organic) materials with a grain size of up to approx. 8 mm. Pre-mixed render mortar, dry mortar, screed material, or floor leveling compounds supplied by the material manufacturer can be processed. The material container of the small silo can be filled with bagged goods, one-way containers, or big bags as required. During operation, the dry material is conveyed from the material hopper into the mixing tube via the dosing screw. In the mixing tube, the dry material—while water is added—is mixed by the mixing shaft into a homogeneous, pasty or liquid product. At the outer end of the mixing tube, the mixed material is discharged directly into the pump hopper. In the pump hopper, the material is conveyed via the pump shaft to the pump unit (rotor/stator). From there, the material is pumped through material hoses to the application site. Bedoyk Twpepfx Aknjwu

Condition: new, functionality: fully functional, Year of construction: 2026, For our machines fit parts from German machines Bedpfx Aervi Skjknjwu With water pump !!!! Technical data: Capacity depends on the type of pump . 6-35L / min. Max pressure max. 30 bar. Main motor - 5.5kW, - 400 rpm Basket motor : 0.55kW, - 28 rpm Diaphragm compressor 0.9kw, 250L / min Water pump Minimum water pressure 2.5 bar at machine on Capacity of hopper 145 L +/- 5 bags Height of hopper 910mm Width 720mm Height with motor 160 cm Weight with accessories 285 kg Basic equipment - rotor stator D6-3 - Plastering gun with 12mm nozzle - Pressure mortar hose 25mm, 10m with couplings - 1/2″ air hose - Water pump - Cleaner - Mixer - Spray nozzle cleaner - Hose cleaner - Toolbox with - Operating instructions APPLICATION - gypsum plasters - Gypsum-lime plasters - cement plasters - lime plasters - lime-cement plasters - mineral plasters - insulating plasters - Mortars for filling joints - reinforcing and adhesive mortars - liquid screeds - masonry mortars - self-levelling putties

Year of construction: 2012, condition: like new (used), Boyens Jelly compact glaze sprayer Serial: 1500112073 Bwodpsix Iynjfx Aknou 2012, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Bedpoz Agv Uofx Aknswu - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: like new (used), Year of construction: 2024, For sale: 8-colour offset printing press RMGT 970PF-8, configuration 8/0 or 4/4, with convertible perfecting unit. The machine is designed for high-quality industrial printing and is equipped with an extensive range of automation systems, including presetting, register control, cleaning systems, and colour measurement. Main technical specifications: Maximum paper size: 650 × 965 mm Minimum sheet size: 290 × 410 mm Minimum sheet size in perfecting mode: 370 × 410 mm Maximum printing area: 640 × 930 mm Maximum printing area in perfecting mode: 630 × 930 mm Maximum printing speed: 15,000 sheets/hour Stock thickness: 0.04–0.5 mm Plate size: 700 × 945 × 0.30 mm Feeder pile capacity: 1,100 mm Delivery pile capacity: 1,100 mm Machine dimensions L × W × H: 12,960 × 3,453 × 2,011 mm Equipment and features: PCS-G Printing Control System Rotary stream feeder Static eliminator on delivery Mechanical double-sheet detector Vacuum suction-type feeder board Paper size preset system Registration device Vertical and lateral image micro-adjustment Ultrasonic double-sheet detector Slewed sheet detector Side lay detector Front-lay Bernoulli device Side lay preset Printing, inking and dampening units: Straight edge plate clamp with positioning pins Infed lower swing gripper feed drum Gripper margin: 10 mm Remote control for vertical, lateral and diagonal register 19 inking rollers, including form rollers 4 dampening rollers R-matic dampening system Oscillating bridge roller Double-double-single perfecting cylinder configuration Delivery section: Static eliminator Chain gripper delivery Delivery jam detector De-curler device Board insertion device Powder sprayer High pile delivery Bodey S S Azepfx Aknswu Delivery area sensor Paper size preset system Paper guide under the first delivery drum Delivery belt guide Belt-type vacuum slow-down wheels Additional options: Automatic feeder pile lateral alignment function Blower guide under the swing Pneumatic pull side guide Feeder air preset Impression pressure preset Impression cylinder cleaning function Feed drum fan-out adjustment mechanism Automatic blanket cleaning device Automatic ink roller cleaning device Smart-FPC plate changing device Ink form rollers 1st–3rd oscillating Hollow rollers for ink roller temperature control system R-matic_D remote ON/OFF Technotrans alpha.c chiller with alcohol density control Photo-type delivery pile lowering sensor Delivery fan antistatic eliminator PPC Server III for CIP-4 file transfer Press information display LithoFlash® Inline RMGT 970 Recto Verso automatic inline measurement system LithoFlash software package: LithoDyn ADR, LithoDyn JobChange, LithoFlash OneShot Machine raised by 200 mm The machine has CE marking, safety covers, tools, and documentation in English. The machine is sold in its current condition and at its current location — “as is, where is”. Inspection is possible by prior arrangement. An excellent solution for printing companies requiring a modern, high-performance 8-colour offset press with 8/0 and 4/4 printing capability and advanced process automation.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Bodpfez Agw Eex Aknswu - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control Bsdpfoz Ag Rrox Aknowu - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: excellent (used), mileage: 287,684 km, power: 243 kW (330.39 HP), first registration: 01/2012, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, loading space volume: 6 m³, Year of construction: 2012, Equipment: ABS, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - Low noise - Speed limiter - LED lights - Media system - Sun visor - Stability control - Toolbox = Further Information = General Information Usable material: Bitumen Bwedpfeuxzdasx Aknju Technical Specifications Number of cylinders: 6 Engine displacement: 7,790 cc Unladen weight: 8,165 kg Axle Configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Functional Superstructure brand: Linnhoff & Henne AWÖL 600 Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request IVECO TRAKKER 330 6X4 WITH 6M3 LINNHOFF & HENNE AWÖL 600 ASPHALT COOKER EURO 5 L PACKAGE 330 HP DRIVE 6X4 WHEELBASE 320 CM LEAF SUSPENSION DAY CAB MANUAL TRANSMISSION MULTIPLE TOOLBOXES LINNHOFF & HENNE AWÖL 600 ASPHALT COOKER CAPACITY 6M3 WORKING HOURS 5032 HATZ DIESEL ENGINE TYPE 2L41C 21.8 KW 12327 HOURS U.S. EPA WORK LIGHTING FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS, COMMERCIAL VEHICLES, AND MACHINERY FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos -Dimensions: 830/680/H1140 mm Bwjdpfxsw U T Ats Aknou -Weight: 50 kg

Condition: used, mileage: 475,000 km, power: 265 kW (360.30 HP), first registration: 01/2007, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: semi-automatic, emission class: euro3, Year of construction: 2007, Equipment: ABS, air conditioning, electronic stability program (ESP), * Mercedes Benz Actros 2536 sewer cleaning truck * First registration: 01-2007 * Superstructure: Simon Moos FAE 865 * For cleaning grease and oil * Sludge tank: 4,900 liters * Drainage tank: 8,400 liters * Fresh water tank: 700 liters * Return tank: 3,600 liters * Hydraulic tank: 250 liters * Water tank for vacuum pump: 270 liters * Vacuum pump Samson V 15: 900 m³/h * Sludge pump Allweiler AED 1 E 560: 30 m³/h * Polymer pump Allweiler SNP 25.1: 2.4 m³/h * Sprayer Parissoli KL 36: 120 l/min at 100 bar * Heating system Stroco 35.00M: 34 kW * Air conditioning * Steerable rear axle * More pictures and videos available via WhatsApp Bsdpfxez D R R Aj Aknewu * Specifications subject to change without notice and prior sale.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Bsdpfx Aezz Rpceknewu - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: excellent (used), Year of construction: 2021, ADLER K 750 – 270 cm Sweeper Attachment for Wheel loader mounting Bedpfxozici Rs Aknewu Year of manufacture: 2021 Working width: 270 cm Hopper capacity: 240 liters Voltage: 12 V In good, fully operational working condition.

Condition: used, mileage: 1,001 km, power: 17 kW (23.11 HP), gearing type: automatic, fuel type: diesel, color: orange, overall weight: 3,800 kg, axle configuration: 4x2, number of seats: 1, first registration: 01/1990, suspension: steel, Year of construction: 1990, operating hours: 3,486 h, front tire size: 205R14C, driver cabin: other, maximum speed: 20 km/h, Vehicle location: Bovenden, leaf spring suspension Bedsyzi I Hopfx Aknewu Superstructure: Bitumen/tar sprayer with Hatz diesel engine 2L31C, approx. 3486 operating hours! Accessory information provided without guarantee. Subject to changes, prior sale and errors!