Used Plate Bender for sale (11,638)

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Blodpfjzbcwmex Af Hsk Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2017, Technical specifications: Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Bljdezfvvvepfx Af Hok Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Bjdpfsza D U Dsx Af Hjlk Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Bjdpfsx Ii Hvox Af Holk Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Length: approx. 2430 mm Bledpfx Ajd Nmdfsf Hok Width: approx. 1520 mm Height: approx. 540 mm

Condition: excellent (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Clamping surface: Ø 1600 mm -Plate height: 70 mm -Control unit: Type ST214 Bjdpszka Uajfx Af Holk -Remote control: Type KEYBOARD ST210 -Connection: 400 volts -Magnetic plate weight: 960 kg -Dimensions: 1650/1600/H270 mm -Weight: 997 kg

Condition: good (used), total length: 2,000 mm, total width: 1,200 mm, Size: 2000x1200x200mm Hole size: 1300x500mm Bsdpfx Aour N Sdef Holk

Condition: good (used), total height: 170 mm, total length: 3,000 mm, total width: 1,500 mm, Dimensions: 3000x1500x170mm Bljdpfx Asth Smbsf Hok

Condition: good (used), Table size: 1100 x 1300 mm Bljdpjh T T Aqofx Af Hok Travel range: 1300 x 1300 mm Spindle travel: 500 mm

Condition: good (used), Manufacturer: Bieffebi Model: Mirage Cylinder length: 1350 mm Bodpfx Asixtn Hjf Holk Cylinder diameter: 340 mm

Condition: good (used), total length: 26,000 mm, total width: 15,000 mm, Dimensions: 2600x1500x170mm Bledpfxoth Sb Ns Af Hsk

Condition: used, Year of construction: 2006, sheet thickness (max.): 6 mm, Brand: DURMA Type: VS 3006 Year of manufacture: 2006 Maximum sheet width: 3080 mm Maximum sheet thickness: 6 mm Blsdpfswrx Tajx Af Hjk

Condition: ready for operation (used), Table size: 1300x1100mm X: 1300mm Y: 1300mm Spindle travel: 500 mm Bjdeh E Dnhopfx Af Holk UNDER POWER!!

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Bedpfx Asx Dtt Asf Hslk Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Clamping area: 250 x 300 mm Bearing surface: 175 x 300 mm Slot width: 18 mm Bodpfx Afszk Eh Ee Hjlk Weight: 23 kg

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Specifications and technical data: Bedpfjzk Nwqjx Af Helk Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow roof-tooth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Dimension readout for: – horizontal cuts: via scale and strip-cutting stop - vertical cuts: via scale from 0–1,300 mm Extraction connection: 100 mm 5 material support rollers, per metre of cutting length 1 feed roller and 1 discharge roller Pneumatic workpiece clamping device between the support rollers 1 centre support element, per metre of cutting length Torsion-free, free-standing machine frame pneumatically retractable slatted frame Round bar guide, vertical and horizontal Finely adjustable folding stop Fine adjustment for horizontal saw cuts via handwheel Strip-cutting stop Manual programming rail with 5 groove blocks Pneumatic lowering of the saw unit Pneumatic saw head locking mechanism Control panel on the saw unit: start button, stop button Control panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swivelling saw head Location: Flörsheim Availability: at short notice

Condition: used, Sheet metal trolley, welded steel construction Second-hand Single-sided loading platform made of plywood 5° tilt Bljdpfxezk Nr Ie Af Hsk Side rail height: 915 mm Trolley powder-coated in RAL 5010 gentian blue Permanent or surface-protected impact- and scratch-resistant Tyres made of thermoplastic rubber on plastic rims with precision deep-groove ball bearings, grey, non-marking Thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm) 200 x 40 Load capacity (kg) 500 Weight (kg) 47.5 Dimensions (WxDxH, mm) 1500 x 680 x 1200 Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Condition: fully overhauled and reconditioned Features and technical specifications: Bsdpfx Aszk N Enof Hslk - Cutting range 4,200 x 2,100 x 50 mm - CE mark - Full rear panelling - Scoring unit - Complete with extraction hood and saw blade - Control unit on the saw carriage - reinforced 4 kW motor - with strip-cutting device - Folding stops and aluminium centre support - retractable slatted bed for horizontal cuts Dimensions: approx. 5250 x 2700 x 1350 mm Weight: approx. 750 kg Availability: at short notice Location: Hesse

Condition: used, Description: * Due to changes in the milling division and production restructuring, we are selling a grid plate / clamping plate and a clamping angle on short notice. * Grid plate / clamping plate: Dimensions: 1,000x800x45mm Bore spacing: 40x40mm Tapping thread: M12 Clamping bushing: d12F7 * Clamping angle with grid plates: Base area: 350x280x40mm Angle height: 350mm 2x grid plates: 350x280x25mm * Important: For logistical reasons, we only sell within Europe. Bodpfx Aezp Hnqof Helk * “The seller excludes any warranty for the purchased goods. The goods are sold in their current condition, without any guarantee regarding their suitability for a specific purpose or their freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller assumes no liability for damages arising from the use of the goods. Any claims by the buyer against the seller are excluded.” * Also available for individual sale. Date: 07/28/2026 * Price for plate and angle: €1,500 (negotiable) * Please do not hesitate to contact me if you have any questions or require further information. *

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Bodjttagdopfx Af Holk Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: excellent (used), Very heavy-duty and stable mobile welding table / straightening table from a vocational training center. Table dimensions (L x W x H): 2600 x 1600 x 920 mm Table top thickness: 50 mm Ribbing under the table top: 60 mm Weight: 1800 kg Bodpfjzbithsx Af Hslk The table can, of course, also be fixed to the existing table legs. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Condition: Guide slightly worn, now only suitable for rough cutting Features and technical specifications: - Cutting length: 4,300 mm - Max. clearance height: 2200 mm - Max. trimming height: 2100 mm - Max. vertical scoring height: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4,500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Availability: at short notice Bjdpszk N Hxefx Af Hslk Storage location: Flörsheim

Condition: used, Year of construction: 1991, Second-hand machine Blodpfx Aszk Nx Isf Hok Year of manufacture: 1991 Fully automatic floor-standing machine, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control system for vertical and horizontal cuts, with aluminium folding stops and aluminium centre support, with SUPER-CUT scoring device Motor 3 kW – 400 V Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Bsdpozk Nm Eefx Af Helk Condition: well-maintained Features and technical specifications: Cutting length 4,300 mm Cutting height 2,200 mm Cutting depth 45 mm Motor: 3 kW Saw blade diameter 220 mm with SuperCut scoring device with automatic sliding grate Complete with length stop Includes strip stop Availability: at short notice Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2000, length 1500 mm width 1000 mm Blsdpfozpf T Sjx Af Hjk