Used Plate Turner for sale (11,399)

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Fpedpfx Amsyuty Se Aek Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: new, Year of construction: 2026, TBS – Manual Sheet Metal Shears Manual sheet metal shear Suitable for cutting construction steel, aluminum, copper, zinc, and plastic High-quality steel cutting blades with a hardness of HRC55-60 Equipped with two operating handles Features a front support surface with a scale and an adjustable rear stop 800 mm table height Fodpfxecnxc Rs Am Aspk Scope of delivery: 2 operating handles Model TBS 2000-12 Item No. 3746020 Technical data Working width max. 2000 mm Sheet metal thickness max. - material tensile strength 400N/mm² 1.25 mm Rear stop range 0-300 mm Weight 511 kg Dimensions in mm 2450 x 1100 x 1050 mm

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg Fpodpfx Asd Tyaajm Aek - immediately available - Will be shipped within Germany for €90.00 net.

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Fpedjwqx Axopfx Am Ask Location: from stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 30.0 mm column arm 100 mm cutting angle 1,5° - 3,5° adjustment speed max. 200 mm/s Fodpfx Aozkvx Ism Aepk weight 36.000 kg dimensions 4700 x 3535 x 2980 mm

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" Fpodszkvx Uspfx Am Ajk - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: used, Year of construction: 2005, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Colour: Green Empty weight: 11.000 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Drive system: Conventional Fjdpfx Amjzkkrvs Aepk - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 2500 - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used roller, 1 meter wide Type: MRB 1001 E Capacity: 1050 x 1 mm (steel) Electric drive, left and right Fpodpfszi Sa Sjx Am Aok Year of manufacture: 2011

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Fpodpfx Aszlryqom Aok Travel in Z-axis: 2,000 mm Tool holder: SK 50 MACHINE DETAILS Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers.

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Fsdpfjzi Ra Rsx Am Aopk Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Clamping surface: Ø 1600 mm Fpsdpfx Aezka Uaem Ask -Plate height: 70 mm -Control unit: Type ST214 -Remote control: Type KEYBOARD ST210 -Connection: 400 volts -Magnetic plate weight: 960 kg -Dimensions: 1650/1600/H270 mm -Weight: 997 kg

Condition: good (used), Clamping area: 250 x 300 mm Bearing surface: 175 x 300 mm Slot width: 18 mm Fpjdpfezk Eh Eox Am Aok Weight: 23 kg

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Condition: Guide slightly worn, now only suitable for rough cutting Features and technical specifications: - Cutting length: 4,300 mm - Max. clearance height: 2200 mm - Max. trimming height: 2100 mm - Max. vertical scoring height: 2100 mm Fodpfjzk N Hxox Am Aepk - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4,500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Specifications and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow roof-tooth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Dimension readout for: – horizontal cuts: via scale and strip-cutting stop - vertical cuts: via scale from 0–1,300 mm Fedpfxjzk Nwqj Am Aopk Extraction connection: 100 mm 5 material support rollers, per metre of cutting length 1 feed roller and 1 discharge roller Pneumatic workpiece clamping device between the support rollers 1 centre support element, per metre of cutting length Torsion-free, free-standing machine frame pneumatically retractable slatted frame Round bar guide, vertical and horizontal Finely adjustable folding stop Fine adjustment for horizontal saw cuts via handwheel Strip-cutting stop Manual programming rail with 5 groove blocks Pneumatic lowering of the saw unit Pneumatic saw head locking mechanism Control panel on the saw unit: start button, stop button Control panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swivelling saw head Location: Flörsheim Availability: at short notice

Condition: used, Sheet metal trolley, welded steel construction Second-hand Single-sided loading platform made of plywood 5° tilt Side rail height: 915 mm Trolley powder-coated in RAL 5010 gentian blue Permanent or surface-protected impact- and scratch-resistant Tyres made of thermoplastic rubber on plastic rims with precision deep-groove ball bearings, grey, non-marking Thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm) 200 x 40 Load capacity (kg) 500 Weight (kg) 47.5 Dimensions (WxDxH, mm) 1500 x 680 x 1200 Availability: at short notice Fpjdpfjzk Nr Ijx Am Aok Storage location: Flörsheim

Condition: good (used), Length: approx. 2430 mm Width: approx. 1520 mm Fedpfjd Nmdfsx Am Aspk Height: approx. 540 mm

Condition: good (used), total length: 2,000 mm, total width: 1,200 mm, Size: 2000x1200x200mm Fpodpfx Amour N Sdj Aek Hole size: 1300x500mm

Condition: good (used), Table size: 1100 x 1300 mm Fsdpfx Aeh T T Aqem Aspk Travel range: 1300 x 1300 mm Spindle travel: 500 mm

Condition: good (used), total height: 170 mm, total length: 3,000 mm, total width: 1,500 mm, Dimensions: 3000x1500x170mm Fpsdpfx Aeth Smbjm Aok

Condition: good (used), Manufacturer: Bieffebi Model: Mirage Cylinder length: 1350 mm Cylinder diameter: 340 mm Fpjdpfx Asixtn Hsm Ask

Condition: good (used), total length: 26,000 mm, total width: 15,000 mm, Dimensions: 2600x1500x170mm Fpodpfxjth Sb Ne Am Ajk

Condition: used, Year of construction: 2006, sheet thickness (max.): 6 mm, Brand: DURMA Type: VS 3006 Year of manufacture: 2006 Maximum sheet width: 3080 mm Fedpfowrx Taox Am Aopk Maximum sheet thickness: 6 mm

Condition: ready for operation (used), Table size: 1300x1100mm X: 1300mm Y: 1300mm Spindle travel: 500 mm UNDER POWER!! Fedpsh E Dnhefx Am Ajpk

Condition: excellent (used), Very heavy-duty and stable mobile welding table / straightening table from a vocational training center. Table dimensions (L x W x H): 2600 x 1600 x 920 mm Table top thickness: 50 mm Ribbing under the table top: 60 mm Fpjdpfozbithex Am Ask Weight: 1800 kg The table can, of course, also be fixed to the existing table legs. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1991, Second-hand machine Year of manufacture: 1991 Fully automatic floor-standing machine, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control system for vertical and horizontal cuts, with aluminium folding stops and aluminium centre support, with SUPER-CUT scoring device Motor 3 kW – 400 V Availability: at short notice Location: Röllbach Fedpfx Amjzk Nx Ij Aopk