Used Ploughshare Mixer for sale (1,818)

Condition: used, input voltage: 380 V, total length: 1,320 mm, total width: 940 mm, total height: 830 mm, tank capacity: 250 l, overall weight: 540 kg, power: 1.5 kW (2.04 HP), Ref: SP 100 L Flour capacity: 100 kg Dough capacity: 160 kg Bowl volume: 250 L Number of speeds: 2 Tool speeds: approx. 110 / 220 rpm Spiral power: 6.5 kW Bowl power: 1.5 kW Timers: 2 Bowl rotation: right / left Controls: push buttons Dimensions: 940x1320x830mm Weight: 540 kg KEMPER SP 100 L spiral mixer – 100 kg of flour The KEMPER SP 100 L is a professional spiral mixer with a fixed bowl, designed for bakery productions requiring large-scale kneading. Its documented capacity reaches approximately 100 kg of flour for 160 kg of dough, with a bowl of approximately 250 L. This configuration makes it a suitable model for bakeries seeking high capacity while maintaining a simple workflow around an integrated bowl. Why this model stands out The SP 100 L uses the zone kneading principle developed by KEMPER. The dough is worked between the spiral and the bowl according to a geometry designed to promote homogeneous kneading while limiting its heating. The model has two speeds, with tool speeds of approximately 110 and 220 rpm, to differentiate the phases of the cycle. Two electromechanical timers allow the working times to be adjusted. The bowl rotation is reversible, to the right or left, which provides greater control during incorporation and kneading. Key advantages 100 kg flour capacity 160 kg dough capacity 250 L bowl Two kneading speeds Two electromechanical timers Reversible bowl rotation (right / left) Bowl and spiral made of stainless steel KEMPER zone kneading system Bowl protection with safety device Closed body facilitating routine maintenance Nodpfjz Arlusx Afujdb

Condition: excellent (used), 540 USED Diosna paddle mixer with removable bowl. EXTERNAL DIMENSIONS (in cm): - W: 95 - L: 123 - H: 112 Nsdezz S Tpspfx Afujdb TECHNICAL DATA: - bowl capacity: 190L / 75kg of flour / 120kg of dough - power supply: 380 V, 3-phase, 50 Hz - weight: 960 kg EQUIPMENT: - 6 stainless steel bowls - 2 speeds The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, mileage: 287,000 km, power: 265 kW (360.30 HP), first registration: 12/2013, fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), * MAN TGS 35.360 8x4 concrete mixer truck * Euro 5 emission standard Ndsdpfx Afjz Ddq Ajujb * Manual transmission * Liebherr 9 m³ mixing drum * Air conditioning * EFH (presumably an abbreviation; further context needed for accurate translation)

Condition: excellent (used), 539 USED Diosna SP 180 AD spiral mixer with removable bowl. EXTERNAL DIMENSIONS (in cm): Nedezz S Sropfx Afujdb - W: 86 - L: 150 - H: 155 TECHNICAL DATA: - bowl capacity: 280L / 110kg of flour / 180kg of dough - power supply: 380 V, 3-phase, 50 Hz - weight: 960 kg EQUIPMENT: - 2 bowls The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 3,3 / 4,4 kw inspection gantry safety lid CE-approved Ndjdpfx Aezwu D Nsfujb Suitable for loader with “Easy Connect” overall dimensions (l x w x h) : 1.750 x 950 x 1.650 mm (open lid: H: 2.100 mm) infeed height : ± 1.350 mm dimensions drum : (l x w x h) : ± 860 x 670 x 565 mm + Loader for eurobins

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Nsdpfjzwu D Asx Afuodb Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: used, functionality: fully functional, mileage: 351,944 km, first registration: 01/2008, fuel type: diesel, Year of construction: 2008, IVECO TRAKKER 450 with CIFA concrete mixer First registered in 2008 - Euro 5 358,000 km 4 axles CIFA SRY1300 equipment – Auxiliary engine Tires: 60/70% remaining tread Valid inspection certificate Ndodjz Ep Uvepfx Afusb Good condition Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, AND KOMATSU.

Condition: used, mileage: 256,704 km, Year of construction: 2016, IVECO TRAKKER AD340T45 with conveyor and Imer concrete mixer Registered 2016 - Euro 6 256,704 km 13,500 operating hours 4 axles Imer LT8XL-7HSL equipment with telescopic conveyor belt Tires: 50/60% tread Good condition Available immediately (current location: Denmark) WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU. Ndedpfxez Ep Uio Afujb

Condition: used, functionality: fully functional, Year of construction: 2016, IVECO TRAKKER 400 with Liebherr concrete mixer First registration 2016 – Euro 6 Mileage: 29,869 km 4 axles Liebherr HTM 904 equipment – power take-off Tires: 50/60% remaining Ndsdpfoz Ep T Sox Afueb Good condition Available immediately (current location: Denmark) WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY SUCH AS CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, functionality: fully functional, mileage: 411,800 km, first registration: 09/2011, Year of construction: 2011, IVECO TRAKKER 450 with CIFA concrete mixer First registered: September 21, 2011 – Euro 5 Mileage: 411,800 km Axles: 4 Equipment: CIFA RY1300 – Power Take-Off (PTO) Tires: 60/70% tread Valid inspection certificate Good condition Available immediately WE CONSIDER TRADES OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU. Njdpfx Ajz Ep T Eofusdb

Condition: used, functionality: fully functional, mileage: 316,475 km, first registration: 09/2007, Year of construction: 2007, operating hours: 4,813 h, DAF CF 85.480 with IMER concrete mixer Ndedpfez Ep Txox Afujb First registration 04.09.2007 – Euro 4 316,475 km H 4813 4 axles IMER LT 130 ID configuration – Auxiliary engine Tyres 50/60% Valid technical inspection Good condition Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER; OR EARTHMOVING MACHINERY BY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, functionality: fully functional, mileage: 207,475 km, first registration: 11/2016, Year of construction: 2019, IVECO TRAKKER 500 with CIFA concrete mixer First registered: November 7, 2019 - Euro 6 Mileage: 258,175 km Axles: 4 Equipment: CIFA RY1300 – Power Take-Off (PTO) Ndjdpfx Aoz Ep Trjfusb Tires: 60/70% remaining Valid inspection certificate Good condition Immediately available WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, AND SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, AND KOMATSU.

Condition: used, functionality: fully functional, Year of construction: 2016, IVECO TRAKKER 400 with Liebherr concrete mixer First registration 2016 - Euro 6 30,954 km 4 axles Liebherr HTM 904 equipment - power take-off (PTO) Tires with 50/60% tread remaining Ndjdpfsz Ep Tlex Afujb Good condition Available immediately (current location: Denmark) WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, AND SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, AND KOMATSU.

Condition: good (used), Boku SK 160 spiral mixer Ndodpfx Ajz Eg Iaefujb - used - for 160 kg of dough - 1 removable mixing bowl - spiral arm manually detachable - 2 speeds - technically sound - collection from warehouse - price: €1,700

Condition: good (used), Robot Coupe R60 Vertical Cutter Mixer Njdpfx Aozvlkwjfusdb Stainless, 60L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph

Condition: good (used), Silverson EX High shear mixer on stand Ndjdpfozvli Tsx Afuob Stainless high shear mixer on stand, 3Kw, 750mm shaft length, high shear diameter 105mm, 3Ph

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control Ndjdpfoydh Agsx Afujb valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. Njdpoy E Hy Uefx Afuodb - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: used, Make : Inoxpa Usage : Powder Blending - Homogeniser Capacity : 5000 L/h Y.o.m 2016 Powder Inlet Funnel Product Inlet Pump Product Outlet pump for circulation Njdpfx Afoxnx Dzeujdb Sample Valve Stainless steel skid mounted Condition : Excellent

Condition: used, Year of construction: 2005, Manufacturer: Karl Schnell Model: 750 Year: 2005 Condition: Used Serial Number: 13909 Nsdpfx Afozww Aneuodb Stock Number: 1936 Mixer: double shaft paddle mixer Capacity: 2000 liter, up to 1000 kg Speeds: 15 / 30 RPM Infeed height: 2200 mm Outfeed height: 800 mm Vacuumpump: liquid ring SIHI LEMB 161 Water: 800 liter/hr Air pressure: 6 Bar Power: 3 x 400V, 50Hz, 13kW Dimensions: 2800 x 2300 x 2400 mm Weight: 2500 kg

Condition: used, Year of construction: 2000, Overview Nsdpfszcgabjx Afuedb This FAMIX-Falterbaum 20000TD premix system, manufactured in 2000, is a fully automatic beverage mixing and carbonation system designed for continuous dosing, mixing, deaeration and carbonation of beverage components before filling. The system is suitable for the production of mixed and carbonated beverages using components such as water, syrup and CO₂. It is built as a compact stainless steel skid with integrated tanks, pumps, valves, piping, instrumentation and control cabinet. The premix unit has a capacity of approx. 22,000 l/h and includes two vertical stainless steel pressure vessels, which can be used for product deaeration, buffering and carbonation. The liquid flow is controlled via automated pneumatic valves and a manual stainless steel pipe connection panel, allowing flexible routing for production and CIP operation. The machine is operated via an integrated FAMIX control cabinet mounted directly on the skid. Inline measuring technology is installed in the stainless steel piping for process monitoring, such as Brix, flow or density control. The system is suitable for beverage producers requiring precise continuous beverage preparation ahead of the filling process. Technical Data - Manufacturer: H. Falterbaum FAMIX-Maschinenbau GmbH - Model / Type: 20000TD - Machine Type: Premix / beverage mixing and carbonation system - Year of Manufacture: 2000 - Capacity: approx. 22,000 l/h - Application: Continuous mixing, dosing, deaeration and carbonation of beverages - Product Components: Water, syrup, CO₂ and beverage components - System Design: Compact stainless steel skid with integrated piping and process equipment - Process Functions: Product deaeration, buffering and carbonation - Construction: Stainless steel frame, tanks and piping - Condition: Used, installed in industrial beverage production environment

Condition: used, Year of construction: 1992, Overview Ndodpezavp Hjfx Afujb This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data - Capacity: 30,000 litres/hour - Application: Carbonated mineral water - Configuration: Carbonator with pumps, tank, and accessories - CO₂ rate: max. 8 g/litre - Drive: Siemens S7 Scope of Delivery - Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system - Pump system  - Tank | KHS  - Control system | Siemens | S7 

Condition: used, Year of construction: 1993, Overview  The following 6 component mixer was built in 1993 by the German manufacturer Famix. The mixer can be offered completely overhauled and with warranty. The machine is available immediately in its current condition.  Technical details  - Capacity: max. 30,000 l/h beverage   - 6-component mixer  - Dimensions (LxWxH): 3,200mm x 1750mm x 2800mm   - Flow meter  - Dosing pump  - Vacuum degassing  - Brix measurement  - CO2 measurement  - CO2 pressure control  - Conductivity measurement   - Electrical data  Ndjdpfovcp U Rox Afueb - Operating voltage 400V/230 V 50 Hz  - Control voltage 42V AC 

Condition: good (used), mileage: 474,000 km, power: 265 kW (360.30 HP), first registration: 04/1999, axle configuration: 8x4, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 8,950 mm, total width: 2,500 mm, total height: 4,000 mm, loading space volume: 9 m³, Year of construction: 1999, Equipment: differential lock, = Additional Options and Accessories = - Leaf suspension - Differential lock - Air-suspended seats - Air horn - Sun visor flap - Toolbox Njdpfeztdk Rsx Afusdb - Central lubrication system = Additional Information = General Information Usable material: Concrete Technical Information Number of cylinders: 6 Transmission Transmission: ZF, manual gearbox Axle Configuration Front axle 1: Steering; Left tire tread: 40%; Right tire tread: 40%; Suspension: Leaf suspension Front axle 2: Steering; Left tire tread: 40%; Right tire tread: 40% Rear axle 1: Twin tires; Differential lock; Left inner tire tread: 30%; Left outer tire tread: 30%; Right inner tire tread: 30%; Right outer tire tread: 30%; Reduction: Outer planetary axles; Suspension: Leaf suspension Rear axle 2: Twin tires; Differential lock; Left inner tire tread: 30%; Left outer tire tread: 30%; Right inner tire tread: 30%; Right outer tire tread: 30%; Reduction: Outer planetary axles; Suspension: Leaf suspension Functional Water installation: Yes Condition Technical condition: very good Visual condition: good

Condition: used, Spiral mixer Diosna SP 120 D Ndjdpfoz A Scwox Afujb Dough capacity: 120 kg Flour capacity: 75 kg Timer control system Two timers Two speed settings Reverse operation Movable with locking mechanism