Used Plunge Router for sale (570)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,148 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 650 mm, spindle motor power: 37,000 W, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, positioning accuracy: 0.008 mm, tool weight: 20,000 g, number of slots in tool magazine: 48, number of axes: 5, This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details. Technical Data • Machine Type: Twin-Spindle Horizontal Machining Center • Control Unit: Siemens SINUMERIK 840D sl • Operator Panel: Siemens OP15T with integrated TCU • ECO Mode • Remote Diagnostics (eWON Router) • PROFIBUS Interface for Automatic Workpiece Loading • Signal Tower (3-color LED) Travels • X-Axis Travel: 750 mm • Y-Axis Travel: 660 mm • Z1-Axis Travel: 650 mm • Z2-Axis Travel: 650 mm Rapid Traverse • X-Axis: 60 m/min • Y-Axis: 60 m/min • Z1/Z2 Axes: 90 m/min Axis Performance • X-Axis Acceleration: 6 m/s² • Y-Axis Acceleration: 6 m/s² • Z1/Z2 Axis Acceleration: 9 m/s² • Feed Force X: 15,000 N • Feed Force Y: 15,000 N • Feed Force Z1/Z2: 10,000 N • Positioning Accuracy: 8 µm Spindle • Number of Spindles: 2 • Precision Motor Spindles • Tool Holder: HSK-A63 (DIN 69893-1) • Spindle Speed: 12,000 rpm • Spindle Power: 37 kW (40% ED) • Spindle Torque: 85 Nm (40% ED) • Maximum Torque: 100 Nm • Direct Drive Axes / Swivel System • 2 NC B-Axes • 2 NC Rotary Axes (A-Axes) • Swivel Range: 0°–180° • Swivel Time (0°–180°): approx. 5 s Technology • Independent X, Y and Z Axes for both Spindles • Separate Direct Measuring System for each Axis • Independent Z-Axis Correction Range: 5 mm Tool Magazine • 96 Tool Stations (2 × 48) • Maximum Tool Length: 400 mm • Maximum Tool Diameter (Adjacent Pockets Occupied): 80 mm • Maximum Tool Diameter (Adjacent Pockets Free): 250 mm • Maximum Tool Weight: 20 kg Lubrication • Automatic Central Lubrication • 5-Channel Media Transfer (Oil or Air) Cooling / Coolant • 70 bar Through-Spindle Coolant • Coolant Tank Capacity: 2,300 l • Coolant Flow Rate: 400 l/min • High-Pressure Pump: 15 kW • Automatic Coolant Refill • Coolant Cleaning System • Water Cooling • Cooling Water Temperature: 22 °C • Cooling Water Flow Rate: 800 l/h Chip Management • Scraper-Type Chip Conveyor • Chip Conveyor Discharge Height: < 1,150 mm • Dry Machining Ready • MMS (Minimum Quantity Lubrication) Compatible Electrical Data • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V DC • Connected Load: 150 kW Additional Features • Automatic Workpiece Loading Interface • Automatic Tool Changer • Closed Machine Enclosure • Machine Lighting • Pneumatic Equipment • Energy Monitoring System • Automatic Media Connections • Modular Machine Design Additional Information • Motor Spindle 11 replaced in Week 19/2024 • Motor Spindle 12 replaced in Week 24/2023 Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Rsdpfezqr Sksx Afgoch Counter Spindle No Driven Tools No

Condition: good (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Spindle tools: 3 boring heads -Size: Ø 50/57/70 mm -Dimensions/Type: see photos -Submission/Price: complete Rcsdpfezta I Sex Afgsh -Transport dimensions: 180/60/H155 mm -Weight: 3.3 kg

Year of construction: 2026, condition: new, Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories: Total enclosure, SK 40 or 50 workpiece carrier according to preference, Cooling unit for dielectric, Automatic fire extinguishing system, Measuring probe, Rodpfsy T It Ejx Afgsch SK 40 or 50 measuring mandrel depending on workpiece carrier, Alphanumeric keyboard for data management, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes, Software package for profile tools, 4-path program for peripheral electrodes, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries, Automatic central lubrication, 1 short dressing holder, 1 mounting flange for erosion wheel. Machine is brand new!! Originally packed and full warranty from Vollmer! Cutter outer diameter: max. 250 mm Shank tool diameter: from 10 - 100 mm Outside diameter of disc-shaped tools: 380mm cutting length: Max. 20 mm Cutting length: Max. 20 mm Tangential clearance angle: max. 6 ° Radial clearance angle: -15° to + 6° Chamfering: automatic max. 70° X axis travel: 280 mm Z-axis travel: 330 mm workpiece carrier cone: SK 50 Y axis travel: 280 mm Workpiece carrier cone: SK 50 A-axis rotation range: 360° B-axis swivel range: +/- 30 ° Tool weight max: 20 kg clearance angle: 30° Dimensions L x W x H: = 1905 x 2520 x 2430 mm Connected load: 3.4 kW (400 V / 50 Hz) colour: grey RAL7045 / RAL 7047 Diameter of rotating electrode: Max. 150 mm Rotational electrode speed: 80 - 1500 rpm weight: approx. 3000 kg

Condition: good (used), functionality: fully functional, Equipment: CE marking, documentation/manual, Complete Homag double-spindle corner routing machine with scoring blade, chipper, 4 routers, edge sanding belt with rotating tables and drilling machine (optional) and without stacking mechanism. Rcodpfx Afsy U Irqegsh

Condition: used, SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI TTSA - Automatic loader - Control panel Rcodpewrh N Dofx Afgsh - Min / max working length 240/1200 mm - Maximum tenon size 100x30 mm - Production: 1200 tenons/hour (600 pieces/hour) - Tool rotation 9,000 rpm - Total installed power 9 kw

Condition: used, Year of construction: 1977, Manufacturer: BOSCH – STRUNCK Rsdpfx Afex R Diwjgjch Model : FKL A 06 Year: 1977 Type: Automatic filler Plunging filling heads Filling pumps per set: 6 units 1 group of pumps up to 100 ml 1 group of pumps up to 200 ml Piston stroke adjustment: mechanical Motor power: 0.37 kW Laminar flow Filling head storage system withclosed circuit for cleaning. Machine dimensions: 100 x 80 x 245 cm Video in running condition available

Condition: new, neu Rcodewiqq Eopfx Afgjh ca. 6 Monate ab Auftragse 162560 € 3072.38 € 1200 mm 730 mm 1200 x 600 mm 1200 x 600 mm 1300 mm 5 - 30 m/min 0-2250 mm/min 0,001-32 mm 685 mm 560 mm 0-675 mm/min 500-2200 1/min 11 kW 5.5 kW 3.1 kW 3.1 kW 4790 mm 3207 mm 2305 mm 8100 kg 1150 kg 1600 kg 405 x 75 x 127 mm 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection & final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis & alarm display Max. table speed (X axis) 30 m/min Integrated machine-body temperature control Double V table ways are coated with Turcite-B. Table is driven by hydraulic system with cooling unit Liner guideways coupled with precision ballscrew and AC servo moter for precise position on Y and Z axes Automatic lubrication system with a pressure switch to detect and shut down themachine when lubrication system is down Wheel flange with scale, clamping width 43~50 mm (1.7"~2") Grinding wheel Ø405x75xØ127mm (Ø16"x3"xØ5") double recessed Electromagnetic chuck 1200 x 600 mm Automatic dressing and compensation system (mounted over the wheel) LED machine lamp Integrated oil cooling system for lubrication, hydraulic and spindle Splash guard Double-sided water baffle Heat exchanger for electric cabinet Oil Film Guideway system Air purge spindle According to "CE" regulations Operating manual in English or German OPTION (PRICE ON REQUEST): Fully enclosed splash guard

Condition: new, neu ca. 6 Monate ab Auftragse Rcodpfx Ajwiq Hmjfgjh Taiwan 119060 € 2250.23 € 1200 mm 730 mm 1.200 x 500 mm 1.200 x 500 mm max. 30 m/min 3.7 kW 27 kVA kW 4600 mm 3040 mm 2200 mm 6400 kg 990 mm 930 kg 1250 kg 405 x 50 x 127 mm 0,001 mm 500 - 2.000 U/min 11 kW 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed (X axis) 30 m/min vertical feed by servo drive and ballscrew spindle transversal feed by servo motor and ballscrew spindle double V-slide wasy (turcite-B) for table longitudinal move grinding wheel spindle on 6 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 109520 € 2069.93 € 610 mm 600 mm 600 x 300 mm 600 x 300 mm 5 - 25 m/min 0 - 3000 mm/min 0,001 mm Rsdpfewiq H Tex Afgoch 350 mm 440 mm 0 - 3000 mm/min 0.001 mm 500 - 1800 1/min 11 kW 2.2 kW 4020 mm 2450 mm 2080 mm 3400 x 2220 x 2530 mm 3700 kg 975 mm 195 kg 370 kg 355 x 50 x 127 mm 1,1 / 1,1 kW 0,005 mm 0,005 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel, with graphical dialog programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heavy duty needle roller bearing for low friction, better accuracy and lower maintenance costs Transverse and vertical feed with precision ball screws (class C2) and AC servo motors Longitudinal feed hydraulically Fully enclosed splash guard with lamp Electromagnetic chuck plate Coolant system 120 lt with automatic paper filter and magnetic separator Automatic diamond roller dresser mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 * The exact configuration of the dresser must be clarified before ordering

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Rcedpovtdztefx Afgeh

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3649, Country of manufacture: Switzerland Voltage: 380 V / 50 Hz / 3 Phases Net weight: approx. 445 kg Dimensions: 730 x 780 x 1380 mm Customs tariff number: 8459.6130 TECHNICAL SPECIFICATIONS Maximum distance between stops: 80 mm Maximum cutting length: 50 mm Maximum cutting diameter (with 24 mm dia. cutter): 36 mm Maximum module: 1 Number of teeth cut – with 1:4 ratio: 6-100 with 1:10 ratio: 6-200 Total rapid approach and plunge travel: 8 mm Maximum axial movement travel of the cutter: 10 mm Maximum plunge cutting travel: 2.5 mm Maximum movement of counter-spindle quill: 25 mm Maximum distance between workpiece axis and cutter axis: 30 mm Maximum cutter diameter: 32 mm Quill body diameter: 35 mm Continuously adjustable slide feed rate: 0-60 mm/min Constant rapid return feed rate of the slide: 3 m/min 8 spindle speeds: 660–5300 rpm Horizontal tilt of the cutter head: approx. 4° Cutter motor power (2 speeds): 0.37/0.59 kW Hydraulic pump motor power: 0.24 kW Coolant pump motor power: 0.07 kW Hydraulic oil tank capacity: 13 l Cutting oil tank capacity: 10 l Quill oil tank capacity: 10 l Rjdpfx Afsw Uc Tbjgjch All technical data provided without guarantee and subject to errors or omissions.

Year of construction: 2012, condition: used, Description: external data input station for use with Vollmer ND brand saw blade handling systems. Serves for individual input of the various processing steps of a saw blade. The data input station with integrated router takes over the interface between the machines, to the customer's own server or PC Rodpsv Sarxofx Afgsch

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Rodpfx Asv Tqdbefgjch Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: used, Grinding wheel dimensions (od x id x width) Ø 650 x Ø 304.8 x 500mm Min/max diameter to be ground 3 / 200 mm Width of regulating wheel 500 mm Number of regulating wheel speeds Infinite Min/max speed of regulating wheel (r.p.m.) 10 / 255 r.p.m. Diamond dressing (auto/manual) Automatic longitudinal, manual penetration for both wheels Diamond dressing speed 255 r.p.m. Number of CNC axes 1 Regulating wheel dimensions (od x id x width) Ø 350 x Ø 203.2 x 500mm Width of grinding wheel 500 mm Rcedpjix N Ensfx Afgsh Maximum length to be ground in plunge grinding 500 mm Power of grinding wheel head motor 55 Kw Power of hydraulic motor 3 Kw Total power 60 Kw Voltage 220/380V Length 2,300 mm Width 2,800 mm Height 2,100 mm Weight 15,000 Kg

Year of construction: 2019, condition: as good as new (ex-display), Complete PVC Window Line 60 Windows Consisting of: Double Mitre Saw DS-110/3.5M End Miller AKF-210 Handle Drilling and Routing Machine KF-130S with self centring Waterslot Drainage Router SK-8/3 Two Head Welder WSA-2 LV, 0.2-2.0mm restrictions Rjdpfoux Aqjx Afgsch Glazing Bead Cutting Saw GLSP-200E with stop system

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet Redpfx Afjttakhsgjch - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Mafell Elektronik handheld router LO 65 Ec with Arunda 80N Maxi and LO-FA router adapter used, from business liquidation Woodworking machine with fine adjustment for routing depth Redpfxsz H Up Is Afgoch for delicate work, as well as template applications in solid wood Technical data according to the manufacturer: Mafell handheld router Type: LO 65 Ec Year of manufacture: 2021 Routing depth: 0 - 65 mm Universal motor: 230 V Tool holder (mm): 1/2" / 6 - 12 mm Design: MidiMAX in T-MAX Weight: 6.9 kg Idle speed: 10000 - 22000 1/min Power: 2600 W additional accessories, as shown in the picture: Mafell Arunda 80 N router template, year of manufacture 2022 Mafell LO-FA router adapter Copy ring ø 27mm Dust extraction hood We recommend an inspection to avoid misunderstandings. Information provided without warranty Information, details, and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Year of construction: 2016, condition: used, overall weight: 16,000 kg, total length: 4,500 mm, total width: 2,600 mm, total height: 2,200 mm, JUNKER JUPITER 500 – CNC Cylindrical Grinding Machine Plunge-Cut Method Technical Data: Workpiece diameter: 2–220 mm Rodpfxoz E T Tps Afgoch Workpiece length: max. 500 mm Corundum grinding wheel: 610 × 500 × 305 mm CBN grinding wheel: 500 × 500 × 305 mm Spindle drive: 37 kW Regulating wheel: 350 × 500 × 203 mm Regulating wheel speed: 1–800 rpm Regulating wheel drive: 11.5 kW Power: 81 kVA Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4500 x 2600 x 2200 mm Year of construction: 2,016 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Year of construction: 1995, functionality: fully functional, Comec FT-CD-CA-650 end-milling machine Redpfez D H Ecjx Afgsch Number of milling heads per side: 1 Length of workpieces: approximately max/min 650-220mm Automatic material feeding from a feeder Operation based on templates

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills Rcjdjzz Sugepfx Afgoh With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality • automatic stacking • flexible allocation based on length and width • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included Rcedpfx Aoywkc Refgeh 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 7) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 8) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 9) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 10) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 11) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Rjdsxx Nuxepfx Afgsch Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Redsyrn Rajpfx Afgsch Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, machine/vehicle number: 169/79, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Details of the R80SM model Rodpfx Afezfh Eiegoch - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80 - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, workpiece weight (max.): 1,000 kg, grinding height: 430 mm, grinding wheel diameter: 405 mm, table load: 1,000 kg, grinding wheel width: 50 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 500 rpm, grinding spindle motor power: 7,500 W, warranty duration: 12 months, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, First commissioning: 2024 Operating hours "grinding wheel in use": approx. 100 hours The machine will be completely inspected by the manufacturer OKAMOTO and delivered with an acceptance protocol for the geometry. Manufacturer's warranty: 12 months for delivery within the European Union and commissioning by T-Rade Service GmbH (commissioning optional in Germany: EUR 7,900, EU EUR 9,800) Design: Column feed Control: Fanuc Screen: Touchscreen Workshop programming: for flat, groove, and step grinding (optional) Conventional operation of the machine possible (manual operation) Automatic multiple plunge cuts Teach-in functions: vertical, dressing, and reversing points Folding dresser with 3 diamonds next to the magnetic clamping plate Automatic compensation of dressing amount Longitudinal guides: double prism, hand-scraped with thermally symmetrical behavior, PTFE coated Maximum table load: 1,000 kg Hydraulic table drive X-axis Electric servo table drive Z-axis Electric servo grinding spindle drive Y-axis Travel in longitudinal direction: 950 mm Travel in transverse direction: 440 mm Travel table-new wheel (Ø 355 mm): 522 mm Grinding wheel standard: Ø355x38 mm Grinding wheel Ø max.: 405 mm Grinding wheel width max.: 50 mm Grinding wheel bore: Ø 127 mm Grinding spindle drive power: 7.5 kW Rcedpoz Hc Sdefx Afgeh Grinding spindle speed, infinitely variable: 500-2500 rpm Leveling screws and support plates Operating/programming/maintenance manual, operating tool LED lamp Machine paint: Dark gray/silver structure Machine dimensions approx. L x W x H: 3,560 x 2,900 x 2,210 mm Weight approx.: 4,950 kg Connection value: 15 kVA Accessories: Folding dresser with automatic compensation Coolant flushing gun Flanges 1 piece Grinding wheels 1 piece Commissioning and training by OKAMOTO is mandatory for the warranty. Optionally available: Electro-permanent magnet, transverse pole: 800x400 mm, p=13 mm, extra charge EUR 9,000.00 Band filter tank: 180 liters, extra charge: EUR 9,000.00 All information is non-binding, subject to prior sale. The machines remain our property until full payment. Our general terms and conditions apply. Delivery: ex works Delivery date: upon agreement (approx. 8 weeks) Prices: plus VAT Payment terms: strictly net, 10% with order, 90% before shipment The price for the machine as stated is valid only in Germany. Other EU countries at an extra charge upon request. No export of the machine.