Used Prefabricated Halls for sale (556)

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, load capacity: 4,000 kg, Manufacturer: KONE Hint: MK10L1 Year of manufacture: 1986 Span: 9.3m Payload: 4t Bledpfx Afjumt Irsxjl Lifting height: 6.3 m Wired remote control Net weight: 2550 kg More sizes in the photos.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, overall weight: 8,000 kg, total length: 16,300 mm, load capacity: 12,500 kg, Manufacturer: STAHL Crane Komép bau " Completely renovated in 2011" Span: 16.3m Lifting height: 10m Load capacity: 12.5t Blsdpfx Asxtmhlsfxsl Modernized, wired remote control system, new STAHL 12.5t trolley

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Bedozw Apgepfx Afxjll Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: Rod20x10RES, ABUS ZHB overhead crane runway, approx. 20x10m Load capacity / lifting capacity: 1000 kg (1 ton) Technical data: Runway made of ABUS HB250 rails The system is delivered complete: ABUS HB rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Abus GM electric chain hoist, travel drives, and pendant control Lifting height approx. 3.5 m The crane is dismantled and available immediately Rail color is affected by oil mist Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarding or collection by appointment only Bsdpfoxr S Dcox Afxjll Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: good (used), Year of construction: 1979, Bridge crane, manufacturer DEMAG, type: EKKE, year of manufacture 1979. Blodpfx Afeh Uqbfjxsl Load capacity: 7500 kg. Span: 7500 mm. Hook height: 5500 mm. Complete with travel motors and hoisting gear from DEMAG. Crane documentation and inspection records, reports, and plans are available. Includes 20 meters of power rail.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Super price reduction: 9,999! Taylor Hobson Talyrond 265 roundness measuring device. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g., of cams on a camshaft, or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "stock photo" from a Taylor Hobson catalog, showing how it is constructed, except for the computer. It comes with a newer HP computer with a small form factor... Max. diameter: 350 mm Max. test part height: 500 mm (higher measurements are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece: +/- 5 mm Max. weight of test part: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets using a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be well protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws"... Shipping is at the buyer's expense and will be done on two Euro pallets... Bljdpfxozcqy Es Afxol The measuring system should definitely be set up and commissioned by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is recommended after a few years... Errors can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget them, the system may be damaged when it starts up... A truly well-maintained, very accurate system that will provide many more years of excellent service!

Condition: new, Year of construction: 2026, operating hours: 1 h, total length: 9,000 mm, total width: 3,600 mm, total height: 700 mm, construction width: 3,600 mm, table height: 700 mm, table length: 9,000 mm, BOOSTON ER-00/900 – 9.0 m WORK TABLE FOR HOUSE PREFABRICATION BOOSTON MACHINERY is a manufacturer of machines and equipment for house prefabrication plants. We produce work tables, assembly tables, rotary tables, butterfly tables, and complete production lines for the prefabrication of wooden structures. TECHNICAL DATA Blodpfjztpznex Afxol ➡️ Table working length: 9000 mm Other available lengths: 4.5 m / 6.0 m / 7.5 m / 9.0 m / 10.5 m / 12.0 m / 13.5 m / 15.0 m ➡️ Table working height: 700 mm ➡️ Table working width: 3600 mm – other widths can be manufactured ➡️ Height range of prefabricated wall using SD-01 clamping cylinder: 200–3400 mm ➡️ Vertical locking pins: 0–240 mm, diameter 35 mm (infinitely adjustable) ➡️ Hole spacing for SD-01 clamping cylinders: 150 mm ➡️ SD-01 cylinder stroke: 160 mm ➡️ Horizontal transport of finished elements – optional: a set of pneumatically lifting rollers – 2 lines of rollers, 620 mm wide ➡️ Table type: fixed table – without drives and motors ➡️ Pneumatic power supply: 8 BAR – only for the ER-00R version equipped with pneumatically lifting transport rollers ➡️ Maximum permissible load: 100 kg/m² of finished prefabricate, with a maximum element height of 3000 mm ## ADDITIONAL OPTIONS 1. SD-01 clamping cylinders 2. Set of pneumatically lifting rollers – 2 lines of rollers 3. Removable starting strip LS-01 ## BOOSTON ER-00 The ER-00 work table is an economical and efficient workstation designed for the prefabrication of walls and other elements in wooden frame construction. The table structure consists of two work sections connected by removable internal crossbars. This solution provides convenient access to the prefabricated element and allows the workstation to be adapted to the production process. The ER-00 works with SD-01 clamping cylinders, which help maintain the proper geometry of the structure during nailing and screwing of wooden elements. The modular design also allows for later expansion of the table – e.g., from 6 m to 12 m in length. The ER-00 table can operate as a standalone workstation or be connected to other BOOSTON equipment to create a complete production line for the prefabrication of wooden walls. An ER-00R version is also available, equipped with pneumatically lifting rollers, enabling horizontal transport of finished prefabricated elements between subsequent production stations. We manufacture our machines in Poland. Manufacturer: BOOSTON MACHINERY

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, 2 stories with stairs, 2 large and one small room – used: Price ex works: €19,500 (net), disassembled, packaged, and loaded! Item 1: Bljdpfx Afjzqz D Aoxjl Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Height: almost 6m Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length: approx. 21.40m, the "gap" for the passage is approx. 4.40m long Depth: approx. 4.24m Ground floor height: approx. 2.86m All offices are closed on three sides and therefore have one side against the hall wall Without flooring Condition: good Available: from approximately Q4/2026 Location: Hamburg

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: K118, Demag / Cranetool Stahlbau Gantry Crane Crane Sky Crane Runway Dimensions approx. 20.3 x 5.2/7.55m with bridge crane Width with 2 protruding posts + 150 + 80cm Payload/lifting capacity 2500 KG Technical data of the system: Crane track/steel construction consisting of HEA240 HEB220/260 HEM240 - beam Upper bridge 6.45m UK bridge 6.1m Top rails 6.06m UK rails 5.84m Hook height 5.45m Track width 4.96 m Total width outer edge 5.2m / 7.55m Inner edge of steel construction 4.96m Base plate steel construction 43x35 + 60x60cm Support spacing 9.5+10m Bjdpfx Afomkfulsxoll The system is delivered complete: Steel construction with power supply 1 bridge with 2500 kg Demag DC-Com chain hoist BJ 2017 !!! Documents are available, more pictures on request. Crane is dismantled and available immediately The location of the article is 75053 Gondelsheim Very good condition, see pictures Dispatch by forwarding agent or pick-up only by appointment

Year of construction: 2010, condition: excellent (used), machine/vehicle number: MBHF-4BR125, DEMAG KBK crane sky crane runway dimensions approx. 33x6.5m + 4 cranes Payload / lifting load 4x125 KG - 0.125to The crane can also be halved in length Technical data of the system: Crane runway made from Demag KBK2/KBK2T rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, trailing cables, power supply, holders/hangers, etc. incl. 4 bridges with 125KG chain hoist 3x Demag DC-COM + 1x steel Bedpfx Afsm Tvviexjll Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: used, Year of construction: 1985, machine/vehicle number: KA, Demag Indoor Crane Gantry Crane Overhead Crane incl. Steel Structure + Floor Control Steel structure approx. 10x3.5 m with Demag KBK I crane track and one bridge Load capacity/lifting capacity 1x 125kg, incl. 1x 80kg Demag PK Manulift chain hoist Technical data of the system: Crane track/steel construction consisting of HEB100 beams Length outer edge steel structure approx. 9.5m Total width outer edge (steel structure) 3.45m Bedpfow Hniysx Afxoll Inner edge steel structure 3.3m Total height steel structure/crane 3m Column height approx. 3m with base plate Underside of runway rail 2.7m Top side of bridge 3.95m Underside of bridge 2.45m Hook height 1.75m (Manulift) Track gauge approx. 3m Rail length approx. 10m Distance between columns: see sketch (4.75m + 4.75m) System is delivered complete: Steel structure complete with columns Demag KBK 1 system incl. chain hoist Crane is dismantled and immediately available Location is 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection only by appointment

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: Rod15x10RES, ABUS ZHB Overhead Crane System, Crane Runway approx. 15x10m Load Capacity / Lifting Capacity: 500 KG - 0.5t Bedpfx Afsxr S Hdoxoll Technical Data of the System: Crane runway made of ABUS HB250 rails System is supplied complete: ABUS HB rails, rail connectors, trolleys, end plates, cable trolley system, brackets/hangers, etc. Including Abus GM chain hoist from year 2024!!! Lifting height approx. 3.5m The system can also be extended; 20 - 25 - 30m or more is possible! Crane is dismantled and available immediately Rail color is affected by oil mist Used condition, see pictures Item location is 75053 Gondelsheim Shipping by freight carrier or collection is only possible by appointment Demag KBK1, KBK2, and KBK3 rails are stock items!

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 44m2 – used: Price ex works: €6,500 (net), disassembled, packed, and loaded! Item 3: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Walkable roof with a maximum load capacity of 100 kg Element width: approx. 1.03m Length (internal): approx. 9.94m (10 elements) Depth (internal): approx. 4.38m (4 elements, plus one narrow element) Height (internal): approx. 2.61m 2 doors All offices are closed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg Bsdjzqz Alopfx Afxell

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD431+432, ABUS overhead crane, crane runway, bridge crane, indoor crane, crane There are 2 identical cranes available!! Load capacity / lifting capacity: 1t - 1000 kg Span: 11,250 mm, external dimension approx. 11,500 mm Year of construction: 1989, with floor control Blodpfx Aexdvncofxol Lifting height: 6 m Hoist: GM1010 F6 Overall height from top of crane to hook approx. 610 mm (320 mm girder + 290 mm hoist) End carriage length with bumper approx. 228 cm The crane is dismantled and available immediately Very good condition, inspection book available Column-mounted slewing cranes and wall-mounted slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible, please inquire according to your postal code Collection preferred

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 26m2 – used: Price ex works: €3,950 (net), disassembled, packaged, and loaded! Item 2: Blodpfx Afozqz A Ejxsl Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof is walkable with a maximum load capacity of 100 kg Element width: approx. 1.03m Length: approx. 6.31m (6 elements) Depth: approx. 4.24m (4 elements) Ground floor height: approx. 2.96m 1x door All offices are enclosed on three sides and therefore stand with one side against the hall wall. Without flooring Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

Year of construction: 2012, condition: like new (used), machine/vehicle number: W111, Steel crane track suspension crane circular track 3x250Kg chain hoist crane Ideal for car washes, electroplating, etc Circle dimensions 6x2.3m (curved HEB140 beams) + Power rails / power supply + 2x 12m substructure HEA 180 + wall brackets + 3x 250Kg chain hoists - electrically movable - trolley travel and lift (approx. 4m) Each chain hoist can be controlled independently of one another Crane is dismantled, packed and immediately available New condition Bedpei Ammysfx Afxsll Collection by appointment in 75053 Gondelsheim Forklift is available for loading Shipping by forwarding agency possible, please inquire with zip code

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: WILres, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Bljdpfey Hpbdsx Afxol Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: KA20+23, ABUS Crane Overhead Crane Bridge Crane Indoor Crane The crane is available twice in identical construction!! Optionally available: 2x 20m HEA220 crane rails, 4 supports (window side), and 20m Vahle conductor rails Load capacity / lifting capacity 1t - 1000KG Track gauge 9500mm, external dimension approx. 9750mm Year of manufacture: 1990 with pendant control Lifting height 6m Hoist: GM chain hoist, 4m lift Construction height (top edge of crane to hook) approx. 600mm End carriage length with buffers approx. 220cm Crane is dismantled and immediately available Bljdpoxdv Nmefx Afxol Very good condition, inspection book is available Column slewing cranes and wall slewing cranes are also available Demag KBK and Abus HB systems as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight possible, please enquire with postcode Collection preferred

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes Bsdpoxwvrujfx Afxsll - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: good (used), Year of construction: 2014, Warehouse offices, room-in-room system, approx. 45m2, 2 rooms – used: Bedpfx Aszqzzusfxoll Price from location: €6,500 (net), disassembled, packed, and loaded! Item 6: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof accessible with a maximum person load of 100kg Element width: approx. 1.03m Length: approx. 9.71m (9 elements, plus 1 narrow one) Depth approx.: 4.66m (4 elements, plus 1 narrow one) Height: approx. 2.96m 2 doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall Includes lighting, etc., as available Without flooring Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. Blsdpfxezv U Tbj Afxol We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 15m2 – used: Price ex works: €2,500 (net), disassembled, packed, and loaded! Item 4: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Roof can be walked on with a maximum load of 100 kg Element width: approx. 1.03m Length: approx. 4.28m (4 elements) Bodpfx Aozqzzbsfxell Depth approx.: 3.60m (3 elements, plus one narrow element) Height: approx. 2.96m 1x door All offices are closed on three sides and therefore have one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale without furniture, etc. Condition: good Available: from approximately Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 1999, operating hours: 76,863 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC 426, Equipment: chip conveyor, Title: 5-Axis Machining Center Deckel Maho DMC 125U L55, Year of Manufacture 1999, with Pallet Changer (5 Positions) Condition: good, technically and visually well-maintained, currently still in full productive use Year of Manufacture: 1999 Location: West Saxony Price: Negotiable Technical Data: Manufacturer: Deckel Maho GmbH, Pfronten Type: DMC 125U L55 Machine No.: 1110 000113 Control: Heidenhain TNC 426 5-Axis version with rotary table (B and C axes) Pallet changer with 5 pallet positions Integrated chip conveyor system Separate coolant/hydraulic unit Operating Hours: approx. 76,863 h Spindle Hours: 4,200 h Blsdszxzgaspfx Afxel Description: For sale is a 5-axis universal machining center Deckel Maho DMC 125U L55, year of manufacture 1999, with Heidenhain TNC 426 control. The machine features a rotary table with B and C axes for complete 5-axis machining of large workpieces, as well as a pallet changer with 5 positions for efficient, automated workpiece changes. A hall crane is also available at the location, which can be used for transporting and handling the workpieces if required. Condition is good, both technically and visually, with approximately 76,863 operating hours. The machine is currently still in full productive use and can be made available on short notice. Inspection and test run at the location in West Saxony can be arranged. Special Note: If there is sufficient interest, it is also possible to take over the entire production hall, including other machining centers, as a complete package. If you are interested in a complete takeover, please feel free to contact us. Price: Negotiable

Year of construction: 2001, condition: good (used), machine/vehicle number: KBK3, DEMAG KBK crane headliner crane runway dimensions approx. 20 x 9 m Track length can be combined variably !!! Any size is possible. Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK2 rails, bridge made from KBK3 Mounting height variable, chain length approx. 4 m The system is delivered complete: -KBK rails, rail connectors - Undercarriages, end plates, cable towing, holders/hangers, etc Bledpehvpzhjfx Afxjl including bridge with Demag 0.25 to chain hoist Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items! Dispatch by forwarding agent, please ask for postal code. Please ask for other dimensions or shipping prices, we will make you a non-binding offer immediately!

Condition: used, Year of construction: 1993, machine/vehicle number: HZ668, DEMAG KBK 2 – Overhead Crane System, Bridge Crane, Hall Crane The images show an example overhead crane system with the components listed below. These components are also available individually! Please request a quote for your overhead crane system, tailored to your specific dimensions. Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg. KBK 2-R left-hand switch (with collector line) KBK 2-R swivel disc, 2000 mm (with collector line and electric swivel function) 71515146 KBK 2-R curved rails 15, 30, 45, 60, 90 degrees (with collector line) KBK 2-R rails (with collector line) The system can be delivered completely according to your requirements. Rails, rail connectors, trolleys, end plates, cable carriers, supports/hangers, and accessories are available. Chain hoists available upon request. Very good, used condition. Bledpfey Ufddox Afxel Shipping via freight forwarder is possible. Demag KBK1, KBK2, and KBK3 rails are in stock!