Used Hall Construction for sale (18,372)

Condition: excellent (used), Used steel hall 36.5 x 13.5 m, eave height from finished floor approx. 9.8 m, gable roof with 3° pitch, top edge of crane runway for installation of bridge cranes approx. 8.5 m from finished floor. The existing hall was originally fitted with two 10t cranes. Steel structure including roof purlins, wall rails, crane runway, without wall panels, windows and doors, bracings... as shown. Base plates need to be newly constructed on site by the buyer. Pricing: €102,000, ex works, loaded, from location 56759 Kaisersesch. Additionally offered: 2 Demag single-girder bridge cranes, 10t x 12,000 mm, lifting height from finished floor approx. 7.5 m. Lifting speeds 4/0.8 m/min, trolley travel speeds 20/5 m/min, crane travel speeds 40/10 m/min. The cranes will be handed over in top condition after workshop inspection, each with new HBC Micron 5 radio control, mutual optical shutdown, pre-limit shutdown at the trolley and crane runway ends. Pricing: €24,000 per crane, ex works, loaded, from location 56759 Kaisersesch. Isdopqx I Hspfx Abvjau New power supply for on-site installation along the crane runway, 36 m, 4-pole, 15 mm², incl. crane main switch, €4,000 Drawings and structural calculations are not available and must be provided by the buyer. Package price for all items together, ex works, loaded: €130,000 negotiable.

Condition: new, Year of construction: 2025, functionality: fully functional, color: white, loading space length: 6,000 mm, loading space width: 6,000 mm, loading space height: 2,000 mm, NEW STOCK Our different sizes: Width x Length → 6m x 6m → from €1,299 → 8m x 6m → from €2,099 → 12m x 8m → from €3,699 → 10m x 12m → from €4,599 → 12m x 12m → from €10,745 plus delivery ☆ CERTIFIED PRODUCTS ☆ TRANSPARENT QUOTATION ☆ INCLUDES GERMAN STRUCTURAL ANALYSIS ☆ ASSEMBLY POSSIBLE → Genuine 750 g/m² PVC tarpaulin – more durable than standard market products → Extra strong and tear-resistant thanks to reinforced fabric → UV-resistant → 100% waterproof → Extra robust, galvanized tubing for maximum stability → Suitable for year-round use → German customer support and expert advice during purchase and installation → Snow load: 130 kg/m² (1m arch spacing) and 70 kg/m² (2m arch spacing) → Wind load: Wind zone 4 (1m arch spacing) and wind zone 2 (2m arch spacing) → Includes ground stakes, concrete anchors, and all other small parts → Spare parts guaranteed → 5-year warranty on correctly installed PVC tarpaulin → 10-year rust-through warranty on the steel frame ► Most models available for immediate delivery ► Colours: green or white ► Includes German structural analysis ► Doors at both gable ends ☏ Call us! We will gladly provide you with a non-binding quotation with our best price guarantee. THE IDEAL ALTERNATIVE TO SOLID CONSTRUCTION Optimal protection against wind, sun, rain, hail, and snow! Usually permit-free (unlike wooden, steel, or sheet metal buildings) No foundation required High stability and structural safety (inspected by a German engineering office) Decades of use: high quality, warranty, and spare parts supply Robust, corrosion-free frame components Various shapes, colors, and sizes available MULTIPLE APPLICATIONS → In agriculture, forestry, industry, commerce, and private use → Storage space for goods, materials, or machinery → Garage / carport for trucks, motorhomes, or boats/yachts → Workshop in lightweight halls → Weather protection on construction sites Iodpfx Aeudwgfsbvoau → Shelter or stable for livestock → Barn for straw, hay, or timber → Greenhouse for plants ! Prices incl. structural analysis ! Delivery and assembly available *Image similar · Prices & colors may vary · Subject to price changes · For an exact price, please request a non-binding quotation · Available while stocks last · Non-binding offer

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Type: Industrial platform staircase / work platform Material: Steel Number of levels: 4 Total height: approx. 8.35 meters Iaedpfeyf Un Ssx Abvou Landing heights: 1st level: approx. 1.81 m 2nd level: approx. 3.60 m 3rd level: approx. 5.40 m 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Safety features: railings around the platforms

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) - 10.0 t overhead crane - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press - Crane hook height: 7 m - Truck entrance gate height: 4.5 x 5 meters Iajdpfeygkinex Abveu - Workshop trolley with tools and lifting gear available - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible

Condition: used, Year of construction: 2019, J&E Hall JEH-9100169-GAM-101 Ethylene Compressor Skid (2019) 32barg design pressure 0/110oC design temperature 2 to 27barg working pressure -50+64oC working temperature with Low stage compressor High stage compressor Oil separator Iasdpfxszb Nhxj Abvou Oil cooler

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Iaodpfx Abom Uyknsveu

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Available immediately Ijdpfx Abjlhqdmjveau

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Iajdpfx Absq Nia Isvju Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Iaedpfsq Nf Tvsx Abvju Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: excellent (used), Compressor refrigeration Isdjxxcahjpfx Abvjau

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: Isdpfx Asq I Nviebvoau 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. Iaodsq N Ud Iopfx Abvsu 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. Iajdpfx Absxqd T Hsvou We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: good (used), Year of construction: 1979, Overhead Crane DEMAG Type: EKKE Year 1979 Lifting capacity 7500Kg. Iajdsh Uqbfspfx Abvsu span width : 7500mm Hook height : 5500mm Complete with traction motors and hoisting gear from DEMAG Crane documentation and test book reports, plans available with 20 meter power rail included.

Year of construction: 2019, condition: used, Weights Empty weight: 1.500 kg Iaodpfx Abszcp I Isvju Functional Lifting capacity: 200 kg Lift height: 3.000 cm CE mark: yes Condition General condition: good Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 7,8x1,58 Additional information Please contact Christian Theißen for more information Manufacturer: Emminghaus Model: Pionier 120-6-30 Year of build: 2019 Condition: Used Data: Max. lifting height: 30,00 m bei 85° Lifting capacity: 200 kg Platform dimensions LxW: 1,25 x 0,90 m Platform dimensions extended LxW: 2,08 x 1,32 m Support width: 4,00 x 4,00 m Transport dimensions LxW: 7,80 x 1,58 m Weight: 1.500 kg Special features: hydraulic drive via gasoline engine (grid-independent), rotatable on chassis, ball head coupling with 50 kg support load.

Condition: used, Year of construction: 2013, General information Colour: Rot Weights Empty weight: 1.250 kg Functional Iajdpsv Tc Ryofx Abvju Lifting capacity: 200 kg Working height: 1.990 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): LxB 7,65 x 1,65 m Production country: DE Additional information Please contact Christian Theißen for more information Units: 912522 Manufacturer: Emminghaus Model: Pionier 85-6-20 Year of build: 2013 Condition: Used Data: Max. lifting height: 19,90 m bei 85° Lifting capacity: 200 kg Platform dimensions LxW: 1,25 x 0,90 m Platform dimensions extended LxW: 2,08 x 1,32 m Support width: 4,00 x 4,00 m Transport dimensions LxW: 7,65 x 1,65 m Weight: 1.250 kg Special features: can be rotated on chassis, ball-head coupling.

Condition: ready for operation (used), maxon EC Motor 301782 Ø 30 mm 60 W with Hall sensors + Encoder MR, Type ML, 500 pulses, 3 channels, with line driver, 24V used, normal signs of use, 100% functional, scope of delivery as per photos Iasdpoi D I Itofx Abvou

Year of construction: 2015, operating hours: 292 h, condition: used, Empty weight: 14.400 kg Chassis type: rigid Dimensions of cargo space: 620 x 245 x 250 cm General condition: very good Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: CH Please contact Vink Machinery for more information Menzi Muck M545 * 2015 * Diesel drive * Demo model * 292 operating hours * 4x4x4 * Air conditioning Iasdpfx Abjxy Rf Uoveu * Independent suspension

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Iaedpfxoxdttps Abvju Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: good (used), The scope of delivery includes: 01x wooden beam, used Wood type: spruce / fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | piece: approx. 25.67 kg The price stated corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact person in our company: Iodpfx Aevu Rq Dsbveau Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for pick-up. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, functionality: fully functional, Year of construction: 2025, For sale: a REMAV RS1500 rotary screen with only a few operating hours – in like-new condition. Iedpfxszd D Uqe Abveau

Condition: good (used), functionality: fully functional, empty load weight: 2,800 kg, maximum load weight: 7,700 kg, first registration: 07/2010, Year of construction: 2010, Tandem low-loader trailer FLIEGL TPS100 Year of manufacture: 2010 First registration: 7/2010 7,700 kg payload 2,800 kg tare weight - 5-meter loading length - 2.49-meter internal width - 3.10-meter ramp length Iajdpszb E E Hsfx Abvou - 0.50-meter ramp width - 0.40-meter walls - Height-adjustable drawbar - Split ramps - D-approval! - Valid MOT until 1/2027! - Immediately ready for use! - Original paint! (not cleaned – not repainted) Selling price: €10,900 net Affordable delivery also possible!

Condition: excellent (used), Year of construction: 2016, operating hours: 2,060 h, Atlas Copco Hilight B5+ Baujahr : 2016 Betriebsstunden: 2.060 Std. LED-Beleuchtung: 4 × 350 W Iodpfx Absy R Awmevsau Lichtabdeckung: bis zu 5.000 m² Gewicht: 981 kg

Condition: used, Year of construction: 2016, operating hours: 6,494 h, Atlas Copco Hilight B5+ Baujahr : 2016 Betriebsstunden: 6.494 Std. LED-Beleuchtung: 4 × 350 W Iedpfx Aoy R Atzsbvsau Lichtabdeckung: bis zu 5.000 m² Gewicht: 981 kg

Condition: used, transversal substructure for planing machine Iodsimz Egjpfx Abvoau Move the planing machine in order to be able to use the planer knives over the entire knife length and the zero line is retained REX Hobelmaschine Querverstellung REX planing machine transverse adjustment Réglage transversal de la raboteuse REX Length 2850 mm / width 2600 mm / height 250 mm + bracket 215 mm